This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/linux-dect@lists.osmocom.org/.
Frédéric LECAILLE frednews78 at free.fris works Patrick… dmesg |grep -v 'vtrx trx' [23440.565272] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23441.095272] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23441.485276] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23441.915276] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23442.795285] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23443.105279] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23443.515292] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23444.685285] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23445.385285] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23446.125291] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23446.575290] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23447.025289] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23447.455291] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23448.355299] identities information: e: 0 class: 0 emc: 21d5 fpn: 06fa1 rpn: 0 [23449.255298] page: RFPI: 37d08 bearer description: bt: 50000000 sn: 6 sp: 0 cn: 23 let me a few minutes to try to lock to the FP signal… On Aug 9, 2012, at 9:18 PM, Patrick McHardy wrote: > On Thu, 9 Aug 2012, Frédéric LECAILLE wrote: > >> >> On Aug 9, 2012, at 12:20 AM, Patrick McHardy wrote: >> >>> Updated patch attached >>> <usdect.diff> >> >> Ok thank you a lot Patrick. >> >> Here are the results: >> >> with your last patch: >> >> dect-transceiver-list --name trx0 >> DECT Transceiver trx0 at cell0: >> Type: vtrx >> RF-band: 00000 >> Events: busy: 0 late: 0 >> >> slot 0: <scanning> packet: P00 carrier: 27 (0.000 MHz) >> RX: bytes 0 packets 0 a-crc-errors 0 x-crc-errors 0 z-crc-errors 0 >> TX: bytes 0 packets 0 >> >> *The frequency is always 0 MHz* >> >> The kernel logs seems to be OK: >> >> [15122.889144] vtrx trx0: set carrier: slot: 0 carrier: 23 >> [15122.899150] vtrx trx0: set carrier: slot: 0 carrier: 24 >> [15122.909150] vtrx trx0: set carrier: slot: 0 carrier: 25 >> [15122.919151] vtrx trx0: set carrier: slot: 0 carrier: 26 >> [15122.929150] vtrx trx0: set carrier: slot: 0 carrier: 27 >> >> >> So I have tried your last patch with mine to force the rf_band to 1: > > Right, it's supposed to be band 1. > >> dect-transceiver-list --name trx0 >> DECT Transceiver trx0 at cell0: >> Type: vtrx >> RF-band: 00001 >> Events: busy: 0 late: 0 >> >> slot 0: <scanning> packet: P00 carrier: 23 (1921.536 MHz) >> RX: bytes 0 packets 0 a-crc-errors 0 x-crc-errors 0 z-crc-errors 0 >> TX: bytes 0 packets 0 >> >> >> The channel seems to be ok, but no station are visible during scanning… >> My contact in USA is not present, perhaps he is not at home… do not know if its station is on... > > Well, on vtrx you're not going to see stations unless you start some > yourself.