Problems Building DECT Stack

[Sebastian ---]

> Date: Fri, 20 Apr 2012 20:57:56 -0700
> From: samuel at sieb.net
> To: linux-dect at lists.osmocom.org
> Subject: Re: Problems Building DECT Stack
> 
> Alexander Huemer wrote:
> > Most likely libnl is okay but is not found.
> > The emphasis was on "install", not on "suitable version".
> > Take a look at the check that is done in configure.ac, there isn't any
> > version checking.
> > Reading config.log also helps in understanding why a configure run
> > failed.
> > Make sure the linker can find the .so.
> > Actually, if you just enter the commands from the "Build instructions"
> > page, it won't work.
> >
> Configure won't be looking for the .so.  It will be looking for the .h file or 
> the pkgconfig info.  You need to install the dev or devel package for libnl.
> 

I Uninstalled the devel Package, then it worked.

But I still have problems with:
Apr 19 19:06:26 bt kernel: [   13.847922] com_on_air_cs 0.0: DECTDataDevice PCMCIA F22  
Apr 19 19:06:26 bt kernel: [   13.888290] com_on_air_cs 0.0: Radio type U2785B
Apr 19 19:06:26 bt kernel: [   13.901784] com_on_air_cs 0.0: Loading firmware ...
Apr 19 19:06:26 bt kernel: [   13.996529] pcmcia 0.1: pcmcia: registering new device pcmcia0.1 (IRQ: 3)
Apr 19 19:06:26 bt kernel: [   13.996740] com_on_air_cs 0.1: DECTDataDevice PCMCIA F22  
Apr 19 19:06:26 bt kernel: [   13.996818] com_on_air_cs 0.1: failed to enable PCMCIA device
Apr 19 19:06:26 bt kernel: [   13.996880] com_on_air_cs: probe of 0.1 failed with error -13

When I try to scan for FPs with dectmon, it doesnt find anything.

Help?

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/linux-dect/attachments/20120424/afa1fa39/attachment.htm>