This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/linux-dect@lists.osmocom.org/.
Patrick McHardy kaber at trash.netAm 13.10.2010 22:45, schrieb Oscar Soriano Riera: > Hi Patrick > Thanks for your help. > > This is the configuration of my dialplan in extension.conf: > > [general] > static=yes > writeprotect=no > autofallthrough=no > > [globals] > CONSOLE = Console/dsp ; Console interface for demo > ;CONSOLE=DAHDI/1 > ;CONSOLE=Phone/phone0 > IAXINFO = guest ; IAXtel username/password > ;IAXINFO=myuser:mypass > TRUNK = DAHDI/G2 ; Trunk interface > TRUNKMSD = 1 ; MSD digits to strip (usually 1 or 0) > FEATURES = > DIALOPTIONS = > RINGTIME = 20 > FOLLOWMEOPTIONS = > PAGING_HEADER = Intercom > ;TRUNK=IAX2/user:pass at provider > > [from-dect] > > ;Incoming calls (from PP) > ; > exten => s,1,Answer ; Answer the line > exten => s,n,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds > exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 > seconds > exten => s,n,WaitExten(,d) ; Wait for an extension to be > dialed. > > ;Outgoing calls (to PP) > > exten => 600,1,Set(RING_PATTERN=3) > exten => 601,1,Set(RING_PATTERN=silent) Does it work if you remove these two lines? > include => dect_register