From jenkins at lists.osmocom.org Thu Jul 1 15:16:31 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 1 Jul 2021 15:16:31 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_norma?= =?UTF-8?Q?l_:_master-asn1c_=C2=BB_a1=3Ddefault,?= =?UTF-8?Q?a2=3Ddefault,a3=3Ddefault,a4=3Ddefau?= =?UTF-8?Q?lt,osmocom-master-debian9_#1268?= In-Reply-To: <1149634017.4169.1625065814054@jenkins.osmocom.org> References: <1149634017.4169.1625065814054@jenkins.osmocom.org> Message-ID: <1123001458.4228.1625152591618@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Sat Jul 3 10:46:04 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 3 Jul 2021 10:46:04 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_Osmocom-repo-insta?= =?UTF-8?Q?ll-debian9_=C2=BB_nightly,repo-install-test_#163?= Message-ID: <25422542.4330.1625309164244@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 370.21 KB...] Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DMAIN <0000> hnbgw_cn.c:461 IuCS remote addr not configured, using default: RI=SSN_PC,PC=0.23.1,SSN=RANAP Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DMAIN <0000> hnbgw_cn.c:461 IuPS remote addr not configured, using default: RI=SSN_PC,PC=0.23.4,SSN=RANAP Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DRANAP <0003> hnbgw_cn.c:512 No cs7 instance configured for IuCS nor IuPS, creating default instance Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> osmo_ss7.c:385 0: Creating SS7 Instance Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> osmo_ss7.c:685 0: Creating Route Table system Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DRANAP <0003> hnbgw_cn.c:525 Local SCCP addr: RI=SSN_PC,PC=0.23.5,SSN=RANAP Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSCCP <0011> sccp_user.c:548 OsmoHNBGW: Using SS7 instance 0, pc:0.23.5 Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSCCP <0011> sccp_user.c:555 OsmoHNBGW: Creating AS instance Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> fsm.c:461 XUA_AS(as-clnt-OsmoHNBGW)[0x5645f9acd110]{AS_DOWN}: Allocated Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> osmo_ss7.c:1013 0: as-as-clnt-OsmoHNBGW: Created AS Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSCCP <0011> sccp_user.c:566 OsmoHNBGW: Using AS instance as-clnt-OsmoHNBGW Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSCCP <0011> sccp_user.c:571 OsmoHNBGW: Creating default route Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> osmo_ss7.c:829 0: Creating route: pc=0=0.0.0 mask=0x0 via AS 'as-clnt-OsmoHNBGW' Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSCCP <0011> sccp_user.c:611 OsmoHNBGW: No unassociated ASP for m3ua, creating new ASP asp-clnt-OsmoHNBGW Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> osmo_ss7.c:1033 0: as-as-clnt-OsmoHNBGW: Adding ASP asp-clnt-OsmoHNBGW to AS Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> fsm.c:461 xua_default_lm(asp-clnt-OsmoHNBGW)[0x5645f9acd670]{IDLE}: Allocated Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> osmo_ss7.c:1482 0: asp-asp-clnt-OsmoHNBGW: Restarting ASP asp-clnt-OsmoHNBGW, r=localhost:2905<->l=localhost:0 Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> fsm.c:461 XUA_ASP(asp-clnt-OsmoHNBGW)[0x5645f9ad1160]{ASP_DOWN}: Allocated Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSCCP <0011> sccp_user.c:638 OsmoHNBGW: Using ASP instance asp-clnt-OsmoHNBGW Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> osmo_ss7.c:456 0: Creating SCCP instance Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSCCP <0011> sccp_user.c:107 Binding user 'SCCP Maangement' to SSN=1 PC=(no PC) Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSS7 <0010> osmo_ss7.c:480 registering user=SCCP for SI 3 with priv 0x5645f9ad1480 Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLSCCP <0011> sccp_user.c:107 Binding user 'OsmoHNBGW' to SSN=142 PC=0.23.5 Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DRANAP <0003> hnbgw_cn.c:550 Remote SCCP addr: IuCS: RI=SSN_PC,PC=0.23.1,SSN=RANAP Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DRANAP <0003> hnbgw_cn.c:552 Remote SCCP addr: IuPS: RI=SSN_PC,PC=0.23.4,SSN=RANAP Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DHNBAP <0001> hnbgw.c:658 Using RNC-Id 23 Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DMAIN <0000> hnbgw.c:663 Listening for Iuh at 0.0.0.0 29169 Jul 03 10:45:54 268a9b5e93d7 osmo-hnbgw[16083]: 20210703104554702 DLINP <0006> stream.c:286 [WAIT_RECONNECT] osmo_stream_cli_reconnect(): retrying in 5 seconds... + systemctl --no-pager -l -n 200 status osmo-bts-virtual ? osmo-bts-virtual.service - Osmocom GSM BTS for virtual Um layer based on GSMTAP/UDP Loaded: loaded (/lib/systemd/system/osmo-bts-virtual.service; enabled; vendor preset: enabled) Active: active (running) since Sat 2021-07-03 10:45:54 UTC; 2s ago Main PID: 16082 (osmo-bts-virtua) Tasks: 1 (limit: 4915) CGroup: /docker/268a9b5e93d764957c768434a9a9fb626f5ffdaadf2691fb948afc22b62afbdc/system.slice/osmo-bts-virtual.service ??16082 /usr/bin/osmo-bts-virtual -s -c /etc/osmocom/osmo-bts-virtual.cfg Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:90 NM_BBTRANSC_OP(bts0-trx0)[0x55592b8f6190]{DISABLED_NOTINSTALLED}: Received Event SW_ACT Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:64 NM_BBTRANSC_OP(bts0-trx0)[0x55592b8f6190]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_OFFLINE Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Power off -> Off line Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts0)[0x55592b8f63e0]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts0)[0x55592b8f63e0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Power off -> Dependency Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts1)[0x55592b8f69b0]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts1)[0x55592b8f69b0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Power off -> Dependency Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts2)[0x55592b8f7010]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts2)[0x55592b8f7010]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Power off -> Dependency Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts3)[0x55592b8f7670]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts3)[0x55592b8f7670]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Power off -> Dependency Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts4)[0x55592b8f7cd0]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts4)[0x55592b8f7cd0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Power off -> Dependency Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts5)[0x55592b8f8330]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts5)[0x55592b8f8330]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Power off -> Dependency Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts6)[0x55592b8f8990]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts6)[0x55592b8f8990]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Power off -> Dependency Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts7)[0x55592b8f8ff0]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts7)[0x55592b8f8ff0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Power off -> Dependency Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=GPRS-NSE(f0) INST=(00,ff,ff): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:743 OC=RADIO-CARRIER(02) INST=(00,00,ff): Set RF Max Power Reduction to 20 dBm Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DL1C <0006> bts_model.c:97 Unimplemented vbts_set_trx Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=RADIO-CARRIER(02) INST=(00,00,ff): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:221 (bts=0,trx=0): O&M Get Attributes [0], Manufacturer Dependent State is unsupported by TRX. Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,00): SET CHAN ATTR (TSC=7 pchan=CCCH+SDCCH4) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=0) Configured multiframe with 'BCCH+CCCH+SDCCH/4+SACCH/4' Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,00): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,01): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=1) Configured multiframe with 'TCH/F+SACCH' Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,01): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,02): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=2) Configured multiframe with 'TCH/F+SACCH' Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,02): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,03): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=3) Configured multiframe with 'TCH/F+SACCH' Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,03): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,04): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=4) Configured multiframe with 'TCH/F+SACCH' Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,04): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,05): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=5) Configured multiframe with 'TCH/F+SACCH' Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,05): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,06): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=6) Configured multiframe with 'TCH/F+SACCH' Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,06): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,07): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=7) Configured multiframe with 'TCH/F+SACCH' Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,07): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=BTS(01) INST=(00,ff,ff): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:146 NM_RCARRIER_OP(bts0-trx0)[0x55592b8f5eb0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_radio_carrier_fsm.c:140 NM_RCARRIER_OP(bts0-trx0)[0x55592b8f5eb0]{DISABLED_OFFLINE}: Delay switch to operative state Enabled, wait for: rsl Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1054 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ADM STATE Locked -> Unlocked Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:142 NM_BTS_OP(bts0)[0x55592b8f5c80]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bts_fsm.c:84 NM_BTS_OP(bts0)[0x55592b8f5c80]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=BTS INST=(00,ff,ff) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=BTS INST=(00,ff,ff) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:150 NM_BBTRANSC_OP(bts0-trx0)[0x55592b8f6190]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:149 NM_BBTRANSC_OP(bts0-trx0)[0x55592b8f6190]{DISABLED_OFFLINE}: Delay switch to operative state Enabled, wait for: rsl Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:1412 (bts=0,trx=0): Rx IPA RSL CONNECT IP=127.0.0.1 PORT=3003 STREAM=0x00 Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DLINP <0012> input/ipa.c:128 127.0.0.1:3003 connection done Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DLINP <0012> input/ipaccess.c:898 received ID_GET for unit ID 6969/0/0 Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DABIS <000d> abis.c:129 RSL Signalling link for TRX0 up Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_trx.c:215 NM_RCARRIER_OP(bts0-trx0)[0x55592b8f5eb0]{DISABLED_OFFLINE}: Received Event RSL_UP Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_radio_carrier_fsm.c:135 NM_RCARRIER_OP(bts0-trx0)[0x55592b8f5eb0]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts0)[0x55592b8f63e0]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts1)[0x55592b8f69b0]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts2)[0x55592b8f7010]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts3)[0x55592b8f7670]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts4)[0x55592b8f7cd0]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts5)[0x55592b8f8330]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts6)[0x55592b8f8990]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts7)[0x55592b8f8ff0]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_trx.c:216 NM_BBTRANSC_OP(bts0-trx0)[0x55592b8f6190]{DISABLED_OFFLINE}: Received Event RSL_UP Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:144 NM_BBTRANSC_OP(bts0-trx0)[0x55592b8f6190]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts0)[0x55592b8f63e0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts0)[0x55592b8f63e0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Dependency -> Off line Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts1)[0x55592b8f69b0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts1)[0x55592b8f69b0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Dependency -> Off line Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts2)[0x55592b8f7010]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts2)[0x55592b8f7010]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Dependency -> Off line Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts3)[0x55592b8f7670]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts3)[0x55592b8f7670]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Dependency -> Off line Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts4)[0x55592b8f7cd0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts4)[0x55592b8f7cd0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Dependency -> Off line Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts5)[0x55592b8f8330]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts5)[0x55592b8f8330]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Dependency -> Off line Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts6)[0x55592b8f8990]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts6)[0x55592b8f8990]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Dependency -> Off line Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts7)[0x55592b8f8ff0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts7)[0x55592b8f8ff0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Dependency -> Off line Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:433 Tx RSL RF RESource INDication Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:3561 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:518 Rx RSL BCCH INFO (SI1, 23 bytes) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPCU <0009> pcu_sock.c:974 PCU socket not connected, dropping message Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPCU <0009> pcu_sock.c:786 Failed to send SI1 to PCU: rc=-5 Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:3561 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:518 Rx RSL BCCH INFO (SI2, 23 bytes) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPCU <0009> pcu_sock.c:974 PCU socket not connected, dropping message Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPCU <0009> pcu_sock.c:786 Failed to send SI2 to PCU: rc=-5 Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:3561 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:607 RX RSL Disabling BCCH INFO (SI2bis) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:3561 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:607 RX RSL Disabling BCCH INFO (SI2ter) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:3561 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:607 RX RSL Disabling BCCH INFO (SI2quater) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts0)[0x55592b8f63e0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts0)[0x55592b8f63e0]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:3561 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:518 Rx RSL BCCH INFO (SI3, 23 bytes) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPCU <0009> pcu_sock.c:974 PCU socket not connected, dropping message Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPCU <0009> pcu_sock.c:786 Failed to send SI3 to PCU: rc=-5 Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> bts.c:567 Updated AGCH max queue length to 12 Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:3561 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:518 Rx RSL BCCH INFO (SI4, 23 bytes) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:879 Rx RSL SACCH FILLING (SI5, 19 bytes) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:899 Rx RSL Disabling SACCH FILLING (SI5bis) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:899 Rx RSL Disabling SACCH FILLING (SI5ter) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:879 Rx RSL SACCH FILLING (SI6, 13 bytes) Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPAG <0005> paging.c:676 Paging SI update Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DRSL <0000> rsl.c:1023 (bts=0,trx=0) Rx Measurement Pre-processing Defaults Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts1)[0x55592b8f69b0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts1)[0x55592b8f69b0]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts2)[0x55592b8f7010]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts2)[0x55592b8f7010]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts3)[0x55592b8f7670]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts3)[0x55592b8f7670]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts4)[0x55592b8f7cd0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts4)[0x55592b8f7cd0]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DPCU <0009> pcu_sock.c:1183 PCU socket connected to external PCU Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts5)[0x55592b8f8330]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts5)[0x55592b8f8330]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:91 OC=GPRS-CELL INST=(00,ff,ff): Sending PCU version report to BSC: 0.9.0.120-1989a Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts6)[0x55592b8f8990]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts6)[0x55592b8f8990]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts7)[0x55592b8f8ff0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts7)[0x55592b8f8ff0]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Off line -> OK Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Enabled Jul 03 10:45:54 268a9b5e93d7 osmo-bts-virtual[16082]: DL1P <0007> scheduler_virtbts.c:200 000002/00/02/02/02 (bts=0,trx=0,ts=0) BCCH: has not been served !! No prim + systemctl stop osmo-bsc osmo-gbproxy osmo-gtphub osmo-hlr osmo-mgw osmo-msc osmo-pcap-client osmo-sip-connector osmo-stp osmo-pcap-server osmo-sgsn osmo-pcu osmo-hnbgw osmo-bts-virtual + [ -n osmo-pcap-server ] + set +x ERROR: services failed to start: osmo-pcap-server + ret=1 + [ -n ] + docker container kill debian9-repo-install-test-nightly debian9-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure From jenkins at lists.osmocom.org Sun Jul 4 10:45:50 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 4 Jul 2021 10:45:50 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_Osmocom-repo-?= =?UTF-8?Q?install-debian9_=C2=BB_nightly,repo-install-test_#164?= In-Reply-To: <25422542.4330.1625309164244@jenkins.osmocom.org> References: <25422542.4330.1625309164244@jenkins.osmocom.org> Message-ID: <850345589.11.1625395550433@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Wed Jul 7 10:38:27 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Wed, 7 Jul 2021 10:38:27 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_Osmocom-repo-insta?= =?UTF-8?Q?ll-debian10_=C2=BB_nightly,repo-install-test_#166?= Message-ID: <923522019.185.1625654307667@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 18.32 KB...] Get:3 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ libosmocore17 1.5.1.174.5e04.202107070026 [120 kB] Get:4 http://deb.debian.org/debian buster/main amd64 libtalloc2 amd64 2.1.14-2 [35.4 kB] Get:5 http://deb.debian.org/debian buster/main amd64 libpcsclite1 amd64 1.8.24-1 [58.5 kB] Get:6 http://deb.debian.org/debian buster/main amd64 libusb-1.0-0 amd64 2:1.0.22-2 [55.3 kB] Get:7 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ libosmocodec0 1.5.1.174.5e04.202107070026 [43.5 kB] Get:8 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ libosmogsm16 1.5.1.174.5e04.202107070026 [202 kB] Get:9 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ libosmocoding0 1.5.1.174.5e04.202107070026 [60.4 kB] Get:10 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ libosmovty9 1.5.1.174.5e04.202107070026 [93.7 kB] Get:11 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ libosmogb12 1.5.1.174.5e04.202107070026 [151 kB] Get:12 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ libosmoctrl0 1.5.1.174.5e04.202107070026 [51.3 kB] Get:13 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ libosmosim2 1.5.1.174.5e04.202107070026 [57.3 kB] Get:14 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ libosmousb0 1.5.1.174.5e04.202107070026 [43.7 kB] Get:15 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ libosmocore 1.5.1.174.5e04.202107070026 [37.5 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1039 kB in 0s (11.6 MB/s) Selecting previously unselected package osmocom-nightly. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 8469 files and directories currently installed.) Preparing to unpack .../00-osmocom-nightly_1.0.0.202107070026_amd64.deb ... Unpacking osmocom-nightly (1.0.0.202107070026) ... Selecting previously unselected package libsctp1:amd64. Preparing to unpack .../01-libsctp1_1.0.18+dfsg-1_amd64.deb ... Unpacking libsctp1:amd64 (1.0.18+dfsg-1) ... Selecting previously unselected package libtalloc2:amd64. Preparing to unpack .../02-libtalloc2_2.1.14-2_amd64.deb ... Unpacking libtalloc2:amd64 (2.1.14-2) ... Selecting previously unselected package libosmocore17:amd64. Preparing to unpack .../03-libosmocore17_1.5.1.174.5e04.202107070026_amd64.deb ... Unpacking libosmocore17:amd64 (1.5.1.174.5e04.202107070026) ... Selecting previously unselected package libosmocodec0:amd64. Preparing to unpack .../04-libosmocodec0_1.5.1.174.5e04.202107070026_amd64.deb ... Unpacking libosmocodec0:amd64 (1.5.1.174.5e04.202107070026) ... Selecting previously unselected package libosmogsm16:amd64. Preparing to unpack .../05-libosmogsm16_1.5.1.174.5e04.202107070026_amd64.deb ... Unpacking libosmogsm16:amd64 (1.5.1.174.5e04.202107070026) ... Selecting previously unselected package libosmocoding0:amd64. Preparing to unpack .../06-libosmocoding0_1.5.1.174.5e04.202107070026_amd64.deb ... Unpacking libosmocoding0:amd64 (1.5.1.174.5e04.202107070026) ... Selecting previously unselected package libosmovty9:amd64. Preparing to unpack .../07-libosmovty9_1.5.1.174.5e04.202107070026_amd64.deb ... Unpacking libosmovty9:amd64 (1.5.1.174.5e04.202107070026) ... Selecting previously unselected package libosmogb12:amd64. Preparing to unpack .../08-libosmogb12_1.5.1.174.5e04.202107070026_amd64.deb ... Unpacking libosmogb12:amd64 (1.5.1.174.5e04.202107070026) ... Selecting previously unselected package libosmoctrl0:amd64. Preparing to unpack .../09-libosmoctrl0_1.5.1.174.5e04.202107070026_amd64.deb ... Unpacking libosmoctrl0:amd64 (1.5.1.174.5e04.202107070026) ... Selecting previously unselected package libpcsclite1:amd64. Preparing to unpack .../10-libpcsclite1_1.8.24-1_amd64.deb ... Unpacking libpcsclite1:amd64 (1.8.24-1) ... Selecting previously unselected package libosmosim2:amd64. Preparing to unpack .../11-libosmosim2_1.5.1.174.5e04.202107070026_amd64.deb ... Unpacking libosmosim2:amd64 (1.5.1.174.5e04.202107070026) ... Selecting previously unselected package libusb-1.0-0:amd64. Preparing to unpack .../12-libusb-1.0-0_2%3a1.0.22-2_amd64.deb ... Unpacking libusb-1.0-0:amd64 (2:1.0.22-2) ... Selecting previously unselected package libosmousb0:amd64. Preparing to unpack .../13-libosmousb0_1.5.1.174.5e04.202107070026_amd64.deb ... Unpacking libosmousb0:amd64 (1.5.1.174.5e04.202107070026) ... Selecting previously unselected package libosmocore. Preparing to unpack .../14-libosmocore_1.5.1.174.5e04.202107070026_amd64.deb ... Unpacking libosmocore (1.5.1.174.5e04.202107070026) ... Setting up osmocom-nightly (1.0.0.202107070026) ... Setting up libtalloc2:amd64 (2.1.14-2) ... Setting up libpcsclite1:amd64 (1.8.24-1) ... Setting up libsctp1:amd64 (1.0.18+dfsg-1) ... Setting up libusb-1.0-0:amd64 (2:1.0.22-2) ... Setting up libosmocore17:amd64 (1.5.1.174.5e04.202107070026) ... Setting up libosmousb0:amd64 (1.5.1.174.5e04.202107070026) ... Setting up libosmocodec0:amd64 (1.5.1.174.5e04.202107070026) ... Setting up libosmogsm16:amd64 (1.5.1.174.5e04.202107070026) ... Setting up libosmovty9:amd64 (1.5.1.174.5e04.202107070026) ... Setting up libosmocoding0:amd64 (1.5.1.174.5e04.202107070026) ... Setting up libosmosim2:amd64 (1.5.1.174.5e04.202107070026) ... Setting up libosmogb12:amd64 (1.5.1.174.5e04.202107070026) ... Setting up libosmoctrl0:amd64 (1.5.1.174.5e04.202107070026) ... Setting up libosmocore (1.5.1.174.5e04.202107070026) ... Processing triggers for libc-bin (2.28-10) ... + configure_osmocom_repo_debian_remove network:osmocom:nightly + local proj=network:osmocom:nightly + rm /etc/apt/sources.list.d/network:osmocom:nightly.list + configure_osmocom_repo_debian network:osmocom:latest + local proj=network:osmocom:latest + proj_with_slashes network:osmocom:latest + echo network:osmocom:latest + sed s.:.:/.g + local obs_repo=download.opensuse.org/repositories/network:/osmocom:/latest/Debian_10/ + local release_key=/var/cache/apt/network:osmocom:latest_Release.key + echo Configuring Osmocom repository + [ -e /var/cache/apt/network:osmocom:latest_Release.key ] Configuring Osmocom repository + apt-get update Hit:1 http://deb.debian.org/debian buster InRelease Hit:2 http://deb.debian.org/debian buster-updates InRelease Hit:3 http://security.debian.org/debian-security buster/updates InRelease Reading package lists... + apt install -y wget WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... wget is already the newest version (1.20.1-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. + wget -O /var/cache/apt/network:osmocom:latest_Release.key https://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_10//Release.key --2021-07-07 10:38:22-- https://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_10//Release.key Resolving download.opensuse.org (download.opensuse.org)... 195.135.221.134, 2001:67c:2178:8::13 Connecting to download.opensuse.org (download.opensuse.org)|195.135.221.134|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1080 (1.1K) Saving to: '/var/cache/apt/network:osmocom:latest_Release.key' 0K . 100% 30.5M=0s 2021-07-07 10:38:22 (30.5 MB/s) - '/var/cache/apt/network:osmocom:latest_Release.key' saved [1080/1080] + apt-key add /var/cache/apt/network:osmocom:latest_Release.key Warning: apt-key output should not be parsed (stdout is not a terminal) OK + echo deb http://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_10/ ./ + apt-get update Get:1 http://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_10 ./ InRelease [1607 B] Hit:2 http://deb.debian.org/debian buster InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:4 http://security.debian.org/debian-security buster/updates InRelease Get:5 http://download.opensuse.org/repositories/network:/osmocom:/latest/Debian_10 ./ Packages [124 kB] Fetched 126 kB in 0s (267 kB/s) Reading package lists... + apt-get -y install osmo-mgw + tee /tmp/out Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: osmo-mgw : Depends: osmocom-latest but it is not going to be installed Depends: libosmoabis10 but it is not going to be installed Depends: libosmonetif8 but it is not going to be installed Depends: libosmotrau2 but it is not going to be installed E: Unable to correct problems, you have held broken packages. + [ -e /tmp/fail ] + find_patterns_or_exit /tmp/out requested an impossible situation ^The following packages have unmet dependencies: Depends: osmocom- but it is not going to be installed + local file=/tmp/out + local pattern + shift + grep -q requested an impossible situation /tmp/out + continue + grep -q ^The following packages have unmet dependencies: /tmp/out + continue + grep -q Depends: osmocom- /tmp/out + continue + grep -q but it is not going to be installed /tmp/out + continue + configure_osmocom_repo_debian_remove network:osmocom:latest + local proj=network:osmocom:latest + rm /etc/apt/sources.list.d/network:osmocom:latest.list + configure_osmocom_repo_debian network:osmocom:nightly + local proj=network:osmocom:nightly + proj_with_slashes network:osmocom:nightly + echo network:osmocom:nightly + sed s.:.:/.g + local obs_repo=download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10/ + local release_key=/var/cache/apt/network:osmocom:nightly_Release.key + echo Configuring Osmocom repository + [ -e /var/cache/apt/network:osmocom:nightly_Release.key ] + apt-key add /var/cache/apt/network:osmocom:nightly_Release.key Configuring Osmocom repository Warning: apt-key output should not be parsed (stdout is not a terminal) OK + echo deb http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10/ ./ + apt-get update Get:1 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ InRelease [1583 B] Hit:2 http://deb.debian.org/debian buster InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:4 http://security.debian.org/debian-security buster/updates InRelease Get:5 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_10 ./ Packages [107 kB] Fetched 109 kB in 0s (231 kB/s) Reading package lists... ### Test successful: test_conflict ### ### Running test: install_repo_packages ### Installing all repository packages + set +x + set +x + install_repo_packages + install_repo_packages_debian + local obs=obs://build.opensuse.org/network:osmocom:nightly/Debian_10 + echo Installing all repository packages + aptitude search -F%p ?origin(obs://build.opensuse.org/network:osmocom:nightly/Debian_10) ?architecture(native) + sort + filter_packages_txt + grep -v ^# /repo-install-test/blacklist_debian10.txt + sort -u + comm -23 osmocom_packages_all.txt blacklist.txt + cat osmocom_packages.txt + apt install -y abisip-find libasn1c-dbg libasn1c-dev libasn1c1 libgtp-dbg libgtp-dev libgtp6 libgtpnl-dbg libgtpnl-dev libgtpnl-tools libgtpnl0 libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-dbgsym liblimesuite-dev liblimesuite20.01-1 liblimesuite20.01-1-dbgsym liborcania-dev liborcania1.2 liborcania1.2-dbgsym libosmo-abis libosmo-abis-dbg libosmo-abis-dev libosmo-e1d-dev libosmo-e1d1 libosmo-e1d1-dbgsym libosmo-fl2k-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-gsup-client-dev libosmo-gsup-client0 libosmo-mgcp-client-dev libosmo-mgcp-client8 libosmo-mgcp-client8-dbgsym libosmo-mslookup-dev libosmo-mslookup0 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-ranap-dbg libosmo-ranap-dev libosmo-ranap3 libosmo-rspro-dev libosmo-rspro1 libosmo-rspro1-dbgsym libosmo-sabp-dbg libosmo-sabp-dev libosmo-sabp0 libosmo-sccp-dev libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmo-sigtran5 libosmo-simtrace2-0 libosmo-simtrace2-0-dbgsym libosmo-simtrace2-dev libosmoabis10 libosmocodec-doc libosmocodec0 libosmocoding-doc libosmocoding0 libosmocore libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmocore17 libosmoctrl-doc libosmoctrl0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmodsp0 libosmogb-doc libosmogb12 libosmogsm-doc libosmogsm16 libosmonetif8 libosmosim2 libosmotrau2 libosmousb0 libosmovty-doc libosmovty9 librtlsdr-dev librtlsdr0 libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libulfius-dev libulfius2.5 libulfius2.5-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym libusrp1 libusrp1-dbgsym libyder-dev libyder2.0 libyder2.0-dbgsym limesuite limesuite-dbgsym limesuite-images limesuite-images20.01 limesuite-udev neocon neocon-dbgsym open5gs-bsf open5gs-bsf-dbgsym open5gs-nssf open5gs-nssf-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym osmocom-nightly python3-osmopy-libs python3-osmopy-utils rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... libosmocodec0 is already the newest version (1.5.1.174.5e04.202107070026). libosmocodec0 set to manually installed. libosmocoding0 is already the newest version (1.5.1.174.5e04.202107070026). libosmocoding0 set to manually installed. libosmocore is already the newest version (1.5.1.174.5e04.202107070026). libosmocore17 is already the newest version (1.5.1.174.5e04.202107070026). libosmocore17 set to manually installed. libosmoctrl0 is already the newest version (1.5.1.174.5e04.202107070026). libosmoctrl0 set to manually installed. libosmogb12 is already the newest version (1.5.1.174.5e04.202107070026). libosmogb12 set to manually installed. libosmogsm16 is already the newest version (1.5.1.174.5e04.202107070026). libosmogsm16 set to manually installed. libosmosim2 is already the newest version (1.5.1.174.5e04.202107070026). libosmosim2 set to manually installed. libosmousb0 is already the newest version (1.5.1.174.5e04.202107070026). libosmousb0 set to manually installed. libosmovty9 is already the newest version (1.5.1.174.5e04.202107070026). libosmovty9 set to manually installed. osmocom-nightly is already the newest version (1.0.0.202107070026). osmocom-nightly set to manually installed. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: open5gs-bsf : Depends: osmocom-nightly (= 1.0.0.202107060026) but 1.0.0.202107070026 is to be installed Depends: open5gs-common (= 2.3.1.202107060026) but it is not going to be installed open5gs-nssf : Depends: osmocom-nightly (= 1.0.0.202107060026) but 1.0.0.202107070026 is to be installed Depends: open5gs-common (= 2.3.1.202107060026) but it is not going to be installed E: Unable to correct problems, you have held broken packages. + ret=1 + [ -n ] + docker container kill debian10-repo-install-test-nightly debian10-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure From jenkins at lists.osmocom.org Wed Jul 7 15:10:14 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Wed, 7 Jul 2021 15:10:14 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_mas?= =?UTF-8?Q?ter-asn1c_=C2=BB_a1=3Ddefault,a2=3Dde?= =?UTF-8?Q?fault,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#1274?= Message-ID: <1072498271.202.1625670614606@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 3.17 KB...] checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for autoconf... /usr/bin/autoconf checking for autoheader... /usr/bin/autoheader checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for bison... bison -y checking for flex... flex checking for yywrap in -lfl... no checking for yywrap in -ll... no checking lex output file root... lex.yy checking whether yytext is a pointer... no checking for ar... /usr/bin/ar checking for ANSI C header files... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking whether byte ordering is bigendian... no checking for off_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for intmax_t... yes checking for library containing getopt... none required checking for strtoimax... yes checking for strtoll... yes checking for mergesort... no checking for mkstemps... yes configure: creating ./config.status config.status: creating skeletons/standard-modules/Makefile config.status: creating skeletons/tests/Makefile config.status: creating libasn1compiler/Makefile config.status: creating libasn1parser/Makefile config.status: creating libasn1print/Makefile config.status: creating asn1c/webcgi/Makefile config.status: creating asn1c/tests/Makefile config.status: creating libasn1fix/Makefile config.status: creating skeletons/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating asn1c/Makefile config.status: creating doc/Makefile config.status: creating asn1c.spec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands + make -j 4 make all-recursive make[1]: Entering directory '/build' Making all in libasn1parser make[2]: Entering directory '/build/libasn1parser' if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF ".deps/asn1parser.Tpo" -c -o asn1parser.lo asn1parser.c; \ then mv -f ".deps/asn1parser.Tpo" ".deps/asn1parser.Plo"; else rm -f ".deps/asn1parser.Tpo"; exit 1; fi bison -y -p asn1p_ -d asn1p_y.y if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF ".deps/asn1p_l.Tpo" -c -o asn1p_l.lo asn1p_l.c; \ then mv -f ".deps/asn1p_l.Tpo" ".deps/asn1p_l.Plo"; else rm -f ".deps/asn1p_l.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF ".deps/asn1p_module.Tpo" -c -o asn1p_module.lo asn1p_module.c; \ then mv -f ".deps/asn1p_module.Tpo" ".deps/asn1p_module.Plo"; else rm -f ".deps/asn1p_module.Tpo"; exit 1; fi asn1p_y.y: warning: 2 shift/reduce conflicts [-Wconflicts-sr] mkdir .libs mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -fPIC -DPIC -o .libs/asn1p_module.o mkdir: cannot create directory '.libs': File exists gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -fPIC -DPIC -o .libs/asn1parser.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -fPIC -DPIC -o .libs/asn1p_l.o asn1p_l.c:3521:12: warning: 'input' defined but not used [-Wunused-function] static int input() ^~~~~ gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -o asn1p_module.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -o asn1parser.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF ".deps/asn1p_oid.Tpo" -c -o asn1p_oid.lo asn1p_oid.c; \ then mv -f ".deps/asn1p_oid.Tpo" ".deps/asn1p_oid.Plo"; else rm -f ".deps/asn1p_oid.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF ".deps/asn1p_value.Tpo" -c -o asn1p_value.lo asn1p_value.c; \ then mv -f ".deps/asn1p_value.Tpo" ".deps/asn1p_value.Plo"; else rm -f ".deps/asn1p_value.Tpo"; exit 1; fi if test -f y.tab.h; then \ to=`echo "asn1p_y_H" | sed \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \ sed -e "/^#/!b" -e "s/Y_TAB_H/$to/g" -e "s|y\.tab\.h|asn1p_y.h|" \ y.tab.h >asn1p_y.ht; \ rm -f y.tab.h; \ if cmp -s asn1p_y.ht asn1p_y.h; then \ rm -f asn1p_y.ht ;\ else \ mv asn1p_y.ht asn1p_y.h; \ fi; \ fi if test -f y.output; then \ mv y.output asn1p_y.output; \ fi sed '/^#/ s|y\.tab\.c|asn1p_y.c|' y.tab.c >asn1p_y.ct && mv asn1p_y.ct asn1p_y.c rm -f y.tab.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF ".deps/asn1p_expr.Tpo" -c -o asn1p_expr.lo asn1p_expr.c; \ then mv -f ".deps/asn1p_expr.Tpo" ".deps/asn1p_expr.Plo"; else rm -f ".deps/asn1p_expr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -fPIC -DPIC -o .libs/asn1p_oid.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -fPIC -DPIC -o .libs/asn1p_value.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -fPIC -DPIC -o .libs/asn1p_expr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -o asn1p_oid.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -o asn1p_l.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -o asn1p_value.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF ".deps/asn1p_xports.Tpo" -c -o asn1p_xports.lo asn1p_xports.c; \ then mv -f ".deps/asn1p_xports.Tpo" ".deps/asn1p_xports.Plo"; else rm -f ".deps/asn1p_xports.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -o asn1p_expr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF ".deps/asn1p_constr.Tpo" -c -o asn1p_constr.lo asn1p_constr.c; \ then mv -f ".deps/asn1p_constr.Tpo" ".deps/asn1p_constr.Plo"; else rm -f ".deps/asn1p_constr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -fPIC -DPIC -o .libs/asn1p_xports.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF ".deps/asn1p_param.Tpo" -c -o asn1p_param.lo asn1p_param.c; \ then mv -f ".deps/asn1p_param.Tpo" ".deps/asn1p_param.Plo"; else rm -f ".deps/asn1p_param.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -o asn1p_xports.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -fPIC -DPIC -o .libs/asn1p_constr.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF ".deps/asn1p_class.Tpo" -c -o asn1p_class.lo asn1p_class.c; \ then mv -f ".deps/asn1p_class.Tpo" ".deps/asn1p_class.Plo"; else rm -f ".deps/asn1p_class.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -fPIC -DPIC -o .libs/asn1p_param.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -o asn1p_constr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF ".deps/asn1p_ref.Tpo" -c -o asn1p_ref.lo asn1p_ref.c; \ then mv -f ".deps/asn1p_ref.Tpo" ".deps/asn1p_ref.Plo"; else rm -f ".deps/asn1p_ref.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -fPIC -DPIC -o .libs/asn1p_class.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -o asn1p_param.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF ".deps/asn1p_y.Tpo" -c -o asn1p_y.lo asn1p_y.c; \ then mv -f ".deps/asn1p_y.Tpo" ".deps/asn1p_y.Plo"; else rm -f ".deps/asn1p_y.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -fPIC -DPIC -o .libs/asn1p_ref.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -o asn1p_class.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -o asn1p_ref.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF .deps/asn1p_y.Tpo -c asn1p_y.c -fPIC -DPIC -o .libs/asn1p_y.o asn1p_y.y: In function 'asn1p_parse': asn1p_y.y:357:13: error: 'param' undeclared (first use in this function) *(void **)param = $1; ^~~~~ asn1p_y.y:357:13: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [asn1p_y.lo] Error 1 Makefile:299: recipe for target 'asn1p_y.lo' failed make[2]: Leaving directory '/build/libasn1parser' make[1]: *** [all-recursive] Error 1 Makefile:302: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:212: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Thu Jul 8 00:07:55 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 8 Jul 2021 00:07:55 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-trx_=C2=BB_--with-neo?= =?UTF-8?Q?n-vfpv4,0,a3=3Ddefault,a4=3Ddefault,rpi4-raspbian10_#3085?= Message-ID: <712145605.204.1625702875326@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 59.48 KB...] /usr/bin/install -c -m 644 osmo-release.mk '/build/deps/install/stow/libosmocore/include' make install-data-hook make[4]: Entering directory '/build/deps/libosmocore' make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '/build/deps/libosmocore' make[3]: Leaving directory '/build/deps/libosmocore' make[2]: Leaving directory '/build/deps/libosmocore' make[1]: Leaving directory '/build/deps/libosmocore' + STOW_DIR=/build/deps/install/stow stow --restow libosmocore + PARALLEL_MAKE= osmo-build-dep.sh libusrp =============================== libusrp =============================== + mkdir -p /build/deps + cd /build/deps + osmo-deps.sh libusrp + project=libusrp + branch=master + git branch -a + grep -c remotes/origin/master$ + [ x1 != x0 ] + branch=origin/master + test -d libusrp + cd libusrp + git fetch --tags origin + git fetch origin + deps= osmo-clean-workspace.sh + chmod -R +w . + git checkout -f HEAD + git clean -dxf + [ -d ] + [ -d layer1-headers ] + git checkout -f origin/master HEAD is now at b293cea... configure.ac: set -std=gnu11 + git rev-parse HEAD b293ceaf0f14abefe82dd537747371dc504482e4 + cd libusrp + mkdir -p /build/deps/install/stow + osmo_source_subdir libusrp + subdir= + [ -n ] + autoreconf --install --force libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:18: installing './compile' configure.ac:18: installing './config.guess' configure.ac:18: installing './config.sub' configure.ac:5: installing './install-sh' configure.ac:5: installing './missing' Makefile.am:40: warning: BUILT_SOURCES multiply defined in condition TRUE ... Makefile.common:25: ... 'BUILT_SOURCES' previously defined here Makefile.am:22: 'Makefile.common' included from here host/apps/Makefile.am: installing './depcomp' host/apps/Makefile.am:39: installing './py-compile' + ./configure --prefix=/build/deps/install/stow/libusrp --with-systemdsystemunitdir=/build/deps/install/stow/libusrp/lib/systemd/system configure: WARNING: unrecognized options: --with-systemdsystemunitdir checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for g++... g++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... gcc3 checking build system type... armv7l-unknown-linux-gnueabihf checking host system type... armv7l-unknown-linux-gnueabihf checking how to print strings... printf checking for gcc... gcc checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert armv7l-unknown-linux-gnueabihf file names to armv7l-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert armv7l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for USB... yes checking for boostlib >= 1.37 (103700)... yes checking whether the Boost::Thread library is available... yes checking for exit in -lboost_thread... yes checking whether the Boost::Date_Time library is available... yes checking for exit in -lboost_date_time... yes checking whether the Boost::Filesystem library is available... yes checking for exit in -lboost_filesystem... yes checking whether the Boost::Program_Options library is available... yes checking for exit in -lboost_program_options... yes checking whether the Boost::System library is available... yes checking for exit in -lboost_system... yes checking for python... /usr/bin/python checking for python version... 2.7 checking for python platform... linux2 checking for python script directory... ${prefix}/lib/python2.7/site-packages checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages checking for doxygen... /usr/bin/doxygen checking for xmlto... no checking for sdcc... sdcc -mmcs51 --no-xinit-opt checking for sdas8051... sdas8051 -plosgff checking sdcc_version "3.5.0 published under GNU General Public License (GPL)"... 3 published under GNU General Public License (GPL).5 published under GNU General Public License (GPL).0 published under GNU General Public License (GPL) checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating usrp.pc config.status: creating usrp.iss config.status: creating doc/Doxyfile FATAL: command execution failed java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274) at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934) at java.io.ObjectInputStream.(ObjectInputStream.java:396) at hudson.remoting.ObjectInputStreamEx.(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Caused: java.io.IOException: Backing channel 'rpi4-raspbian10build-ansible-2' is disconnected. at hudson.remoting.RemoteInvocationHandler.channelOrFail(RemoteInvocationHandler.java:216) at hudson.remoting.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:286) at com.sun.proxy.$Proxy56.isAlive(Unknown Source) at hudson.Launcher$RemoteLauncher$ProcImpl.isAlive(Launcher.java:1211) at hudson.Launcher$RemoteLauncher$ProcImpl.join(Launcher.java:1203) at hudson.tasks.CommandInterpreter.join(CommandInterpreter.java:194) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:144) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:91) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20) at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:803) at hudson.model.Build$BuildExecution.build(Build.java:197) at hudson.model.Build$BuildExecution.doRun(Build.java:163) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:513) at hudson.model.Run.execute(Run.java:1907) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) FATAL: Unable to delete script file /tmp/jenkins3351462465779521539.sh java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274) at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934) at java.io.ObjectInputStream.(ObjectInputStream.java:396) at hudson.remoting.ObjectInputStreamEx.(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel at 63103e57:rpi4-raspbian10build-ansible-2": Remote call on rpi4-raspbian10build-ansible-2 failed. The channel is closing down or has closed down at hudson.remoting.Channel.call(Channel.java:994) at hudson.FilePath.act(FilePath.java:1158) at hudson.FilePath.act(FilePath.java:1147) at hudson.FilePath.delete(FilePath.java:1670) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:162) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:91) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20) at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:803) at hudson.model.Build$BuildExecution.build(Build.java:197) at hudson.model.Build$BuildExecution.doRun(Build.java:163) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:513) at hudson.model.Run.execute(Run.java:1907) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) Build step 'Execute shell' marked build as failure ERROR: Step ?[Deprecated] Scan for compiler warnings? failed: no workspace for master-osmo-trx/INSTR=--with-neon-vfpv4,WITH_MANUALS=0,a3=default,a4=default,label=rpi4-raspbian10 #3085 From jenkins at lists.osmocom.org Thu Jul 8 00:09:55 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 8 Jul 2021 00:09:55 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-pcu_=C2=BB?= =?UTF-8?Q?_master,0,rpi4-raspbian10,none,False_#4026?= Message-ID: <1286949576.205.1625702995690@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 107.07 KB...] Making all in src make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/src' CXX gprs_debug.lo CC csn1.lo CC gsm_rlcmac.lo CC gprs_bssgp_pcu.lo CC gprs_bssgp_rim.lo CXX gprs_rlcmac.lo CXX gprs_rlcmac_sched.lo CXX gprs_rlcmac_meas.lo CXX gprs_rlcmac_ts_alloc.lo CC gprs_ms.lo CXX gprs_ms_storage.lo CC gprs_pcu.lo CXX pcu_l1_if.lo CC pcu_vty.lo CXX pcu_vty_functions.lo CC mslot_class.lo CC nacc_fsm.lo CC neigh_cache.lo CXX tbf.lo CC tbf_fsm.lo CXX tbf_ul.lo CXX tbf_dl.lo CXX bts.lo CXX pdch.lo CC pdch_ul_controller.lo CXX encoding.lo CC sba.lo CXX decoding.lo CXX llc.lo CXX rlc.lo CC osmobts_sock.lo CC gprs_codel.lo CC coding_scheme.lo CXX egprs_rlc_compression.lo CXX pcu_main.o CXXLD libgprs.la copying selected object files to avoid basename conflicts... ar: `u' modifier ignored since `D' is the default (see `U') CXXLD osmo-pcu make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/src' Making all in doc make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' Making all in examples make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/examples' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/examples' Making all in manuals make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/manuals' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' Making all in tests make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/tests' CXX pcu_emu.o CXX test_replay_gprs_attach.o CC openbsc_clone.o CXX test_pdp_activation.o CXXLD emu/pcu_emu make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/tests' Making all in contrib make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib' Making all in systemd make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib/systemd' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib' make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub' make[1]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub' Making dvi in include make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/include' make[2]: Nothing to be done for 'dvi'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/include' Making dvi in src make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/src' make[2]: Nothing to be done for 'dvi'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/src' Making dvi in doc make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' Making dvi in examples make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/examples' make[3]: Nothing to be done for 'dvi'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/examples' Making dvi in manuals make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/manuals' make[3]: Nothing to be done for 'dvi'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' make[3]: Nothing to be done for 'dvi-am'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' Making dvi in tests make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/tests' make[2]: Nothing to be done for 'dvi'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/tests' Making dvi in contrib make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib' Making dvi in systemd make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib/systemd' make[3]: Nothing to be done for 'dvi'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib' make[3]: Nothing to be done for 'dvi-am'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib' make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub' make[2]: Nothing to be done for 'dvi-am'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub' make[1]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub' Making check in include make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/include' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/include' Making check in src make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/src' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/src' Making check in doc make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' Making check in examples make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/examples' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/examples' Making check in manuals make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/manuals' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' make[2]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/doc' Making check in tests make[2]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/tests' make rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/tests' CXX RLCMACTest.o CXX AllocTest.o CXX MslotTest.o CXX TbfTest.o CXX TypesTest.o CXX MsTest.o CXX LListTest.o CXX LlcTest.o CC codel_test.o CXX EdgeTest.o CXX BitcompTest.o CXX egprs_rlc_compression.o CXX FnTest.o CXX AppInfoTest.o CXX PdchUlcTest.o CXXLD rlcmac/RLCMACTest CXXLD alloc/AllocTest CXXLD alloc/MslotTest CXXLD tbf/TbfTest CXXLD types/TypesTest CXXLD ms/MsTest CXXLD llist/LListTest CXXLD llc/LlcTest CCLD codel/codel_test CXXLD edge/EdgeTest CXXLD bitcomp/BitcompTest CXXLD fn/FnTest CXXLD app_info/AppInfoTest CXXLD ulc/PdchUlcTest make[3]: Leaving directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/tests' make check-local make[3]: Entering directory '/build/osmo-pcu-0.9.0.121-4f67/_build/sub/tests' /bin/bash '../../../tests/testsuite' ## ----------------------------------- ## ## osmo-pcu 0.9.0.121-4f67 test suite. ## ## ----------------------------------- ## Regression tests 1: rlcmac ok 2: multi_slot ok 3: ts_alloc FATAL: command execution failed java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274) at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934) at java.io.ObjectInputStream.(ObjectInputStream.java:396) at hudson.remoting.ObjectInputStreamEx.(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Caused: java.io.IOException: Backing channel 'rpi4-raspbian10build-ansible-3' is disconnected. at hudson.remoting.RemoteInvocationHandler.channelOrFail(RemoteInvocationHandler.java:216) at hudson.remoting.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:286) at com.sun.proxy.$Proxy56.isAlive(Unknown Source) at hudson.Launcher$RemoteLauncher$ProcImpl.isAlive(Launcher.java:1211) at hudson.Launcher$RemoteLauncher$ProcImpl.join(Launcher.java:1203) at hudson.tasks.CommandInterpreter.join(CommandInterpreter.java:194) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:144) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:91) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20) at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:803) at hudson.model.Build$BuildExecution.build(Build.java:197) at hudson.model.Build$BuildExecution.doRun(Build.java:163) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:513) at hudson.model.Run.execute(Run.java:1907) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) FATAL: Unable to delete script file /tmp/jenkins827463477299237881.sh java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274) at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934) at java.io.ObjectInputStream.(ObjectInputStream.java:396) at hudson.remoting.ObjectInputStreamEx.(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel at 1dee5697:rpi4-raspbian10build-ansible-3": Remote call on rpi4-raspbian10build-ansible-3 failed. The channel is closing down or has closed down at hudson.remoting.Channel.call(Channel.java:994) at hudson.FilePath.act(FilePath.java:1158) at hudson.FilePath.act(FilePath.java:1147) at hudson.FilePath.delete(FilePath.java:1670) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:162) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:91) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20) at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:803) at hudson.model.Build$BuildExecution.build(Build.java:197) at hudson.model.Build$BuildExecution.doRun(Build.java:163) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:513) at hudson.model.Run.execute(Run.java:1907) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) Build step 'Execute shell' marked build as failure ERROR: Step ?[Deprecated] Scan for compiler warnings? failed: no workspace for master-osmo-pcu/FIRMWARE_VERSION=master,WITH_MANUALS=0,label=rpi4-raspbian10,with_dsp=none,with_vty=False #4026 From jenkins at lists.osmocom.org Thu Jul 8 00:09:56 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 8 Jul 2021 00:09:56 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-bts_=C2=BB?= =?UTF-8?Q?_trx,master,0,default,rpi4-raspbian10_#5608?= Message-ID: <1810050251.207.1625702996144@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 57.93 KB...] See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '/build/deps/libosmocore/src' make[3]: Leaving directory '/build/deps/libosmocore/src' make[2]: Leaving directory '/build/deps/libosmocore/src' Making install in src/vty make[2]: Entering directory '/build/deps/libosmocore/src/vty' CC buffer.lo CC command.lo CC vty.lo CC vector.lo CC utils.lo CC telnet_interface.lo CC logging_vty.lo utils.c: In function ?handle_counter?: utils.c:312:3: warning: ?osmo_counter_get? is deprecated: Implement as osmo_stat_item instead [-Wdeprecated-declarations] osmo_counter_get(counter), VTY_NEWLINE); ^~~~~~~~~~~~~~~~ In file included from utils.c:39:0: ../../include/osmocom/core/counter.h:35:29: note: declared here static inline unsigned long osmo_counter_get(struct osmo_counter *ctr) ^~~~~~~~~~~~~~~~ CC stats_vty.lo CC fsm_vty.lo CC talloc_ctx_vty.lo CC cpu_sched_vty.lo CC tdef_vty.lo CCLD libosmovty.la make[3]: Entering directory '/build/deps/libosmocore/src/vty' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/deps/install/stow/libosmocore/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '/build/deps/install/stow/libosmocore/lib' libtool: warning: relinking 'libosmovty.la' libtool: install: (cd /build/deps/libosmocore/src/vty; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -mtls-dialect=gnu2 -DBUILDING_LIBOSMOCORE -Wall -version-info 9:0:0 -no-undefined -o libosmovty.la -rpath /build/deps/install/stow/libosmocore/lib buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo cpu_sched_vty.lo tdef_vty.lo ../../src/libosmocore.la -ltalloc ) libtool: install: /usr/bin/install -c .libs/libosmovty.so.9.0.0T /build/deps/install/stow/libosmocore/lib/libosmovty.so.9.0.0 libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmovty.so.9.0.0 libosmovty.so.9 || { rm -f libosmovty.so.9 && ln -s libosmovty.so.9.0.0 libosmovty.so.9; }; }) libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmovty.so.9.0.0 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.9.0.0 libosmovty.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmovty.lai /build/deps/install/stow/libosmocore/lib/libosmovty.la libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmocore/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '/build/deps/libosmocore/src/vty' make[2]: Leaving directory '/build/deps/libosmocore/src/vty' Making install in src/codec make[2]: Entering directory '/build/deps/libosmocore/src/codec' CC gsm610.lo CC gsm620.lo CC gsm690.lo CC gsm660.lo CC ecu.lo CC ecu_fr.lo CCLD libosmocodec.la make[3]: Entering directory '/build/deps/libosmocore/src/codec' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/deps/install/stow/libosmocore/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '/build/deps/install/stow/libosmocore/lib' libtool: warning: relinking 'libosmocodec.la' libtool: install: (cd /build/deps/libosmocore/src/codec; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -mtls-dialect=gnu2 -DBUILDING_LIBOSMOCORE -Wall -version-info 2:0:2 -no-undefined -o libosmocodec.la -rpath /build/deps/install/stow/libosmocore/lib gsm610.lo gsm620.lo gsm660.lo gsm690.lo ecu.lo ecu_fr.lo ../../src/libosmocore.la ) libtool: install: /usr/bin/install -c .libs/libosmocodec.so.0.2.0T /build/deps/install/stow/libosmocore/lib/libosmocodec.so.0.2.0 libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocodec.so.0.2.0 libosmocodec.so.0 || { rm -f libosmocodec.so.0 && ln -s libosmocodec.so.0.2.0 libosmocodec.so.0; }; }) libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocodec.so.0.2.0 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.0.2.0 libosmocodec.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocodec.lai /build/deps/install/stow/libosmocore/lib/libosmocodec.la libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmocore/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '/build/deps/libosmocore/src/codec' make[2]: Leaving directory '/build/deps/libosmocore/src/codec' Making install in src/gsm make[2]: Entering directory '/build/deps/libosmocore/src/gsm' GEN gsm0503_conv.c Generating convolutional codes... Generate 'xcch' definition Generate 'rach' definition Generate 'rach_ext' definition Generate 'sch' definition Generate 'cs2' definition Generate 'cs3' definition Generate 'cs2_np' definition Generate 'cs3_np' definition Generate 'tch_afs_12_2' definition Generate 'tch_afs_10_2' definition Generate 'tch_afs_7_95' definition Generate 'tch_afs_7_4' definition Generate 'tch_afs_6_7' definition Generate 'tch_afs_5_9' definition Generate 'tch_afs_5_15' definition Generate 'tch_afs_4_75' definition Generate 'tch_fr' definition Generate 'tch_hr' definition Generate 'tch_ahs_7_95' definition Generate 'tch_ahs_7_4' definition Generate 'tch_ahs_6_7' definition Generate 'tch_ahs_5_9' definition Generate 'tch_ahs_5_15' definition Generate 'tch_ahs_4_75' definition Generate 'tch_axs_sid_update' definition Generate 'mcs1_dl_hdr' definition Generate 'mcs1_ul_hdr' definition Generate 'mcs1' definition Generate 'mcs2' definition Generate 'mcs3' definition Generate 'mcs4' definition Generate 'mcs5_dl_hdr' definition Generate 'mcs5_ul_hdr' definition Generate 'mcs5' definition Generate 'mcs6' definition Generate 'mcs7_dl_hdr' definition Generate 'mcs7_ul_hdr' definition Generate 'mcs7' definition Generate 'mcs8' definition Generate 'mcs9' definition Generation complete. make install-am make[3]: Entering directory '/build/deps/libosmocore/src/gsm' CC rxlev_stat.lo CC tlv_parser.lo CC comp128.lo CC a5.lo CC comp128v23.lo CC gsm_utils.lo CC rsl.lo CC gsm48.lo CC gsm48_arfcn_range_encode.lo gsm_utils.c:121:9: note: #pragma message: including GnuTLS for getrandom fallback. #pragma message ("including GnuTLS for getrandom fallback.") ^~~~~~~ gsm_utils.c: In function ?osmo_get_rand_id?: gsm_utils.c:465:9: note: #pragma message: Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25 #pragma message ("Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25") ^~~~~~~ CC gsm48_ie.lo CC gsm0808.lo CC sysinfo.lo CC gprs_cipher_core.lo CC gprs_rlc.lo CC gsm0480.lo CC abis_nm.lo CC gsm0502.lo CC gsm0411_utils.lo CC gsm0411_smc.lo CC gsm0414.lo CC gsm0411_smr.lo CC lapd_core.lo CC lapdm.lo CC kasumi.lo CC gsm29205.lo CC gsm_04_08_gprs.lo CC auth_core.lo CC auth_comp128v1.lo CC auth_comp128v23.lo CC auth_xor.lo CC auth_milenage.lo CC gea.lo CC milenage/aes-internal.lo FATAL: command execution failed java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274) at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934) at java.io.ObjectInputStream.(ObjectInputStream.java:396) at hudson.remoting.ObjectInputStreamEx.(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Caused: java.io.IOException: Backing channel 'rpi4-raspbian10build-ansible-1' is disconnected. at hudson.remoting.RemoteInvocationHandler.channelOrFail(RemoteInvocationHandler.java:216) at hudson.remoting.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:286) at com.sun.proxy.$Proxy56.isAlive(Unknown Source) at hudson.Launcher$RemoteLauncher$ProcImpl.isAlive(Launcher.java:1211) at hudson.Launcher$RemoteLauncher$ProcImpl.join(Launcher.java:1203) at hudson.tasks.CommandInterpreter.join(CommandInterpreter.java:194) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:144) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:91) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20) at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:803) at hudson.model.Build$BuildExecution.build(Build.java:197) at hudson.model.Build$BuildExecution.doRun(Build.java:163) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:513) at hudson.model.Run.execute(Run.java:1907) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) FATAL: Unable to delete script file /tmp/jenkins16011485649161637212.sh java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274) at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934) at java.io.ObjectInputStream.(ObjectInputStream.java:396) at hudson.remoting.ObjectInputStreamEx.(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel at 6276247:rpi4-raspbian10build-ansible-1": Remote call on rpi4-raspbian10build-ansible-1 failed. The channel is closing down or has closed down at hudson.remoting.Channel.call(Channel.java:994) at hudson.FilePath.act(FilePath.java:1158) at hudson.FilePath.act(FilePath.java:1147) at hudson.FilePath.delete(FilePath.java:1670) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:162) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:91) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20) at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:803) at hudson.model.Build$BuildExecution.build(Build.java:197) at hudson.model.Build$BuildExecution.doRun(Build.java:163) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:513) at hudson.model.Run.execute(Run.java:1907) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) Build step 'Execute shell' marked build as failure ERROR: Step ?[Deprecated] Scan for compiler warnings? failed: no workspace for master-osmo-bts/BTS_MODEL=trx,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=rpi4-raspbian10 #5608 From jenkins at lists.osmocom.org Thu Jul 8 00:09:56 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 8 Jul 2021 00:09:56 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-trx_=C2=BB_--with-?= =?UTF-8?Q?neon,0,a3=3Ddefault,a4=3Ddefault,rpi4-raspbian10_#3085?= Message-ID: <686670598.206.1625702996144@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 52.88 KB...] make[3]: Entering directory '/build/deps/libosmocore/src/usb' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/deps/install/stow/libosmocore/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmousb.la '/build/deps/install/stow/libosmocore/lib' libtool: warning: relinking 'libosmousb.la' libtool: install: (cd /build/deps/libosmocore/src/usb; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/libusb-1.0 -std=gnu11 -mtls-dialect=gnu2 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall -version-info 0:0:0 -o libosmousb.la -rpath /build/deps/install/stow/libosmocore/lib osmo_libusb.lo ../../src/libosmocore.la -ltalloc -lusb-1.0 ) libtool: install: /usr/bin/install -c .libs/libosmousb.so.0.0.0T /build/deps/install/stow/libosmocore/lib/libosmousb.so.0.0.0 libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmousb.so.0.0.0 libosmousb.so.0 || { rm -f libosmousb.so.0 && ln -s libosmousb.so.0.0.0 libosmousb.so.0; }; }) libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmousb.so.0.0.0 libosmousb.so || { rm -f libosmousb.so && ln -s libosmousb.so.0.0.0 libosmousb.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmousb.lai /build/deps/install/stow/libosmocore/lib/libosmousb.la libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmocore/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '/build/deps/libosmocore/src/usb' make[2]: Leaving directory '/build/deps/libosmocore/src/usb' Making install in utils make[2]: Entering directory '/build/deps/libosmocore/utils' CC osmo-arfcn.o CC osmo-auc-gen.o CC osmo-aka-verify.o CC osmo_config_merge-osmo-config-merge.o CCLD osmo-arfcn CCLD osmo-auc-gen CCLD osmo-aka-verify CCLD osmo-config-merge make[3]: Entering directory '/build/deps/libosmocore/utils' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/deps/install/stow/libosmocore/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c osmo-arfcn osmo-auc-gen osmo-config-merge osmo-aka-verify '/build/deps/install/stow/libosmocore/bin' libtool: install: /usr/bin/install -c .libs/osmo-arfcn /build/deps/install/stow/libosmocore/bin/osmo-arfcn libtool: install: /usr/bin/install -c .libs/osmo-auc-gen /build/deps/install/stow/libosmocore/bin/osmo-auc-gen libtool: install: /usr/bin/install -c .libs/osmo-config-merge /build/deps/install/stow/libosmocore/bin/osmo-config-merge libtool: install: /usr/bin/install -c .libs/osmo-aka-verify /build/deps/install/stow/libosmocore/bin/osmo-aka-verify make[3]: Leaving directory '/build/deps/libosmocore/utils' make[2]: Leaving directory '/build/deps/libosmocore/utils' Making install in tapset make[2]: Entering directory '/build/deps/libosmocore/tapset' make[3]: Entering directory '/build/deps/libosmocore/tapset' make[3]: Nothing to be done for 'install-exec-am'. make install-data-hook make[4]: Entering directory '/build/deps/libosmocore/tapset' make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '/build/deps/libosmocore/tapset' make[3]: Leaving directory '/build/deps/libosmocore/tapset' make[2]: Leaving directory '/build/deps/libosmocore/tapset' Making install in tests make[2]: Entering directory '/build/deps/libosmocore/tests' GEN conv/gsm0503_test_vectors.c Generating test vectors... Generate 'xcch' test vector Generate 'rach' test vector Generate 'rach_ext' test vector Generate 'sch' test vector Generate 'cs2' test vector Generate 'cs3' test vector Generate 'cs2_np' test vector Generate 'cs3_np' test vector Generate 'tch_afs_12_2' test vector Generate 'tch_afs_10_2' test vector Generate 'tch_afs_7_95' test vector Generate 'tch_afs_7_4' test vector Generate 'tch_afs_6_7' test vector Generate 'tch_afs_5_9' test vector Generate 'tch_afs_5_15' test vector Generate 'tch_afs_4_75' test vector Generate 'tch_fr' test vector Generate 'tch_hr' test vector Generate 'tch_ahs_7_95' test vector Generate 'tch_ahs_7_4' test vector Generate 'tch_ahs_6_7' test vector Generate 'tch_ahs_5_9' test vector Generate 'tch_ahs_5_15' test vector Generate 'tch_ahs_4_75' test vector Generate 'tch_axs_sid_update' test vector Generate 'mcs1_dl_hdr' test vector Generate 'mcs1_ul_hdr' test vector Generate 'mcs1' test vector Generate 'mcs2' test vector Generate 'mcs3' test vector Generate 'mcs4' test vector Generate 'mcs5_dl_hdr' test vector Generate 'mcs5_ul_hdr' test vector Generate 'mcs5' test vector Generate 'mcs6' test vector Generate 'mcs7_dl_hdr' test vector Generate 'mcs7_ul_hdr' test vector Generate 'mcs7' test vector Generate 'mcs8' test vector Generate 'mcs9' test vector Generation complete. make install-am make[3]: Entering directory '/build/deps/libosmocore/tests' make[4]: Entering directory '/build/deps/libosmocore/tests' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/deps/libosmocore/tests' make[3]: Leaving directory '/build/deps/libosmocore/tests' make[2]: Leaving directory '/build/deps/libosmocore/tests' make[2]: Entering directory '/build/deps/libosmocore' make[3]: Entering directory '/build/deps/libosmocore' /bin/mkdir -p '/build/deps/install/stow/libosmocore/bin' /bin/mkdir -p '/build/deps/install/stow/libosmocore/share/aclocal' /bin/mkdir -p '/build/deps/install/stow/libosmocore/lib/pkgconfig' /usr/bin/install -c osmo-release.sh '/build/deps/install/stow/libosmocore/bin' /usr/bin/install -c -m 644 libosmocore.pc libosmocodec.pc libosmovty.pc libosmogsm.pc libosmogb.pc libosmoctrl.pc libosmocoding.pc libosmosim.pc libosmousb.pc '/build/deps/install/stow/libosmocore/lib/pkgconfig' /bin/mkdir -p '/build/deps/install/stow/libosmocore/include' /usr/bin/install -c -m 644 m4/osmo_ac_code_coverage.m4 m4/osmo_ax_code_coverage.m4 '/build/deps/install/stow/libosmocore/share/aclocal' /usr/bin/install -c -m 644 osmo-release.mk '/build/deps/install/stow/libosmocore/include' make install-data-hook make[4]: Entering directory '/build/deps/libosmocore' make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '/build/deps/libosmocore' make[3]: Leaving directory '/build/deps/libosmocore' make[2]: Leaving directory '/build/deps/libosmocore' make[1]: Leaving directory '/build/deps/libosmocore' + STOW_DIR=/build/deps/install/stow stow --restow libosmocore + PARALLEL_MAKE= osmo-build-dep.sh libusrp =============================== libusrp =============================== + mkdir -p /build/deps + cd /build/deps + osmo-deps.sh libusrp + project=libusrp + branch=master + + grep -c remotes/origin/master$ git branch -a + [ x1 != x0 ] + branch=origin/master + test -d libusrp + cd libusrp + git fetch --tags origin + git fetch origin + deps= osmo-clean-workspace.sh + chmod -R +w . + git checkout -f HEAD + git clean -dxf + [ -d ] + [ -d layer1-headers ] + git checkout -f origin/master HEAD is now at b293cea... configure.ac: set -std=gnu11 + git rev-parse HEAD b293ceaf0f14abefe82dd537747371dc504482e4 + cd libusrp + mkdir -p /build/deps/install/stow + osmo_source_subdir libusrp + subdir= + [ -n ] + autoreconf --install --force libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:18: installing './compile' configure.ac:18: installing './config.guess' configure.ac:18: installing './config.sub' configure.ac:5: installing './install-sh' configure.ac:5: installing './missing' Makefile.am:40: warning: BUILT_SOURCES multiply defined in condition TRUE ... Makefile.common:25: ... 'BUILT_SOURCES' previously defined here Makefile.am:22: 'Makefile.common' included from here host/apps/Makefile.am: installing './depcomp' host/apps/Makefile.am:39: installing './py-compile' + ./configure --prefix=/build/deps/install/stow/libusrp --with-systemdsystemunitdir=/build/deps/install/stow/libusrp/lib/systemd/system configure: WARNING: unrecognized options: --with-systemdsystemunitdir FATAL: command execution failed java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274) at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934) at java.io.ObjectInputStream.(ObjectInputStream.java:396) at hudson.remoting.ObjectInputStreamEx.(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Caused: java.io.IOException: Backing channel 'rpi4-raspbian10build-ansible-1' is disconnected. at hudson.remoting.RemoteInvocationHandler.channelOrFail(RemoteInvocationHandler.java:216) at hudson.remoting.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:286) at com.sun.proxy.$Proxy56.isAlive(Unknown Source) at hudson.Launcher$RemoteLauncher$ProcImpl.isAlive(Launcher.java:1211) at hudson.Launcher$RemoteLauncher$ProcImpl.join(Launcher.java:1203) at hudson.tasks.CommandInterpreter.join(CommandInterpreter.java:194) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:144) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:91) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20) at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:803) at hudson.model.Build$BuildExecution.build(Build.java:197) at hudson.model.Build$BuildExecution.doRun(Build.java:163) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:513) at hudson.model.Run.execute(Run.java:1907) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) FATAL: Unable to delete script file /tmp/jenkins1991665661747290590.sh java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274) at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934) at java.io.ObjectInputStream.(ObjectInputStream.java:396) at hudson.remoting.ObjectInputStreamEx.(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel at 6276247:rpi4-raspbian10build-ansible-1": Remote call on rpi4-raspbian10build-ansible-1 failed. The channel is closing down or has closed down at hudson.remoting.Channel.call(Channel.java:994) at hudson.FilePath.act(FilePath.java:1158) at hudson.FilePath.act(FilePath.java:1147) at hudson.FilePath.delete(FilePath.java:1670) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:162) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:91) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20) at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:803) at hudson.model.Build$BuildExecution.build(Build.java:197) at hudson.model.Build$BuildExecution.doRun(Build.java:163) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:513) at hudson.model.Run.execute(Run.java:1907) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) Build step 'Execute shell' marked build as failure ERROR: Step ?[Deprecated] Scan for compiler warnings? failed: no workspace for master-osmo-trx/INSTR=--with-neon,WITH_MANUALS=0,a3=default,a4=default,label=rpi4-raspbian10 #3085 From jenkins at lists.osmocom.org Thu Jul 8 09:26:04 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 8 Jul 2021 09:26:04 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_master-osmo-b?= =?UTF-8?Q?ts_=C2=BB_trx,master,0,default,rpi4-raspbian10_#5609?= In-Reply-To: <1810050251.207.1625702996144@jenkins.osmocom.org> References: <1810050251.207.1625702996144@jenkins.osmocom.org> Message-ID: <984946416.240.1625736364969@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Thu Jul 8 09:27:18 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 8 Jul 2021 09:27:18 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_master-osmo-?= =?UTF-8?Q?pcu_=C2=BB_master,0,rpi4-raspbian10,none,False_#4027?= In-Reply-To: <1286949576.205.1625702995690@jenkins.osmocom.org> References: <1286949576.205.1625702995690@jenkins.osmocom.org> Message-ID: <1221586802.241.1625736438141@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Thu Jul 8 10:01:21 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 8 Jul 2021 10:01:21 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_master-osmo-trx_=C2=BB_--wit?= =?UTF-8?Q?h-neon-vfpv4,0,a3=3Ddefault,a4=3Ddefault,rpi4-raspbian10_#3086?= In-Reply-To: <712145605.204.1625702875326@jenkins.osmocom.org> References: <712145605.204.1625702875326@jenkins.osmocom.org> Message-ID: <1406140907.247.1625738481111@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Thu Jul 8 10:01:30 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 8 Jul 2021 10:01:30 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_master-osmo-trx_=C2=BB_--?= =?UTF-8?Q?with-neon,0,a3=3Ddefault,a4=3Ddefault,rpi4-raspbian10_#3086?= In-Reply-To: <686670598.206.1625702996144@jenkins.osmocom.org> References: <686670598.206.1625702996144@jenkins.osmocom.org> Message-ID: <343918416.248.1625738490020@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Thu Jul 8 10:41:36 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 8 Jul 2021 10:41:36 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_Osmocom-repo-i?= =?UTF-8?Q?nstall-debian10_=C2=BB_nightly,repo-install-test_#167?= In-Reply-To: <923522019.185.1625654307667@jenkins.osmocom.org> References: <923522019.185.1625654307667@jenkins.osmocom.org> Message-ID: <1667670549.251.1625740896614@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Thu Jul 8 15:16:28 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 8 Jul 2021 15:16:28 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_norma?= =?UTF-8?Q?l_:_master-asn1c_=C2=BB_a1=3Ddefault,?= =?UTF-8?Q?a2=3Ddefault,a3=3Ddefault,a4=3Ddefau?= =?UTF-8?Q?lt,osmocom-master-debian9_#1275?= In-Reply-To: <1072498271.202.1625670614606@jenkins.osmocom.org> References: <1072498271.202.1625670614606@jenkins.osmocom.org> Message-ID: <2132895128.268.1625757388135@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Fri Jul 9 12:05:07 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 12:05:07 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27209?= Message-ID: <461215031.321.1625832307883@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 247.16 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_gmm.o CC gprs_sgsn.o CC gprs_sndcp.o CC gprs_sm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_ares.o CC gtphub_sock.o CC gtphub_vty.o CC gtphub_main.o CC gtphub.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Fri Jul 9 12:05:23 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 12:05:23 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27210?= In-Reply-To: <461215031.321.1625832307883@jenkins.osmocom.org> References: <461215031.321.1625832307883@jenkins.osmocom.org> Message-ID: <291900107.322.1625832323466@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 247.53 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Fri Jul 9 12:08:49 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 12:08:49 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27211?= In-Reply-To: <291900107.322.1625832323466@jenkins.osmocom.org> References: <291900107.322.1625832323466@jenkins.osmocom.org> Message-ID: <1908396087.323.1625832529356@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 248.73 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC sgsn_ares.lo CC crc24.lo CC gprs_llc_parse.lo CC gprs_utils.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sndcp.o CC gprs_gmm_attach.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_ares.o CC gtphub_sock.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' Makefile:461: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Fri Jul 9 12:14:54 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 12:14:54 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27212?= In-Reply-To: <1908396087.323.1625832529356@jenkins.osmocom.org> References: <1908396087.323.1625832529356@jenkins.osmocom.org> Message-ID: <1892377688.325.1625832894223@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 273.78 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_llc_parse.lo CC gprs_gb_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CC crc24.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gb.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_sgsn.o CC gprs_mm_state_gb_fsm.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_vty.o CC gtphub.o CC gtphub_ares.o CC gtphub_sock.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Fri Jul 9 14:20:37 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 14:20:37 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-trx_=C2=BB_--with-?= =?UTF-8?Q?neon,0,a3=3Ddefault,a4=3Ddefault,rpi4-raspbian10_#3091?= Message-ID: <344835406.329.1625840437064@jenkins.osmocom.org> See Changes: ------------------------------------------ Started by upstream project "master-osmo-trx" build number 3091 originally caused by: Started by upstream project "master-libusrp" build number 1299 originally caused by: Started by timer Running as SYSTEM Building remotely on rpi4-raspbian10build-ansible-1 (rpi4-raspbian10) in workspace /home/osmocom-build/jenkins/workspace/master-osmo-trx/INSTR/--with-neon/WITH_MANUALS/0/a3/default/a4/default/label/rpi4-raspbian10 The recommended git tool is: NONE FATAL: java.io.IOException: Unexpected termination of the channel java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274) at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934) at java.io.ObjectInputStream.(ObjectInputStream.java:396) at hudson.remoting.ObjectInputStreamEx.(ObjectInputStreamEx.java:49) at hudson.remoting.Command.readFrom(Command.java:142) at hudson.remoting.Command.readFrom(Command.java:128) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Caused: java.io.IOException: Unexpected termination of the channel at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75) Also: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-raspbian10build-ansible-1 at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1800) at hudson.remoting.Request.call(Request.java:199) at hudson.remoting.Channel.call(Channel.java:1000) at hudson.FilePath.act(FilePath.java:1158) at hudson.FilePath.act(FilePath.java:1147) at org.jenkinsci.plugins.gitclient.Git.getClient(Git.java:121) at hudson.plugins.git.GitSCM.createClient(GitSCM.java:906) at hudson.plugins.git.GitSCM.createClient(GitSCM.java:837) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1290) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1204) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:636) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:508) at hudson.model.Run.execute(Run.java:1907) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) Caused: hudson.remoting.RequestAbortedException at hudson.remoting.Request.abort(Request.java:345) at hudson.remoting.Channel.terminate(Channel.java:1085) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:89) ERROR: Step ?[Deprecated] Scan for compiler warnings? failed: no workspace for master-osmo-trx/INSTR=--with-neon,WITH_MANUALS=0,a3=default,a4=default,label=rpi4-raspbian10 #3091 From jenkins at lists.osmocom.org Fri Jul 9 14:20:38 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 14:20:38 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-trx_=C2=BB_--with-neo?= =?UTF-8?Q?n-vfpv4,0,a3=3Ddefault,a4=3Ddefault,rpi4-raspbian10_#3091?= Message-ID: <1907144726.330.1625840438961@jenkins.osmocom.org> See Changes: ------------------------------------------ Started by upstream project "master-osmo-trx" build number 3091 originally caused by: Started by upstream project "master-libusrp" build number 1299 originally caused by: Started by timer Running as SYSTEM Building remotely on rpi4-raspbian10build-ansible-2 (rpi4-raspbian10) in workspace /home/osmocom-build/jenkins/workspace/master-osmo-trx/INSTR/--with-neon-vfpv4/WITH_MANUALS/0/a3/default/a4/default/label/rpi4-raspbian10 The recommended git tool is: NONE FATAL: java.io.IOException: Unexpected EOF java.io.IOException: Unexpected EOF at hudson.remoting.ChunkedInputStream.readUntilBreak(ChunkedInputStream.java:100) at hudson.remoting.ChunkedCommandTransport.readBlock(ChunkedCommandTransport.java:39) at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:34) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61) Also: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-raspbian10build-ansible-2 at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1800) at hudson.remoting.Request.call(Request.java:199) at hudson.remoting.Channel.call(Channel.java:1000) at hudson.FilePath.act(FilePath.java:1158) at hudson.FilePath.act(FilePath.java:1147) at org.jenkinsci.plugins.gitclient.Git.getClient(Git.java:121) at hudson.plugins.git.GitSCM.createClient(GitSCM.java:906) at hudson.plugins.git.GitSCM.createClient(GitSCM.java:837) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1290) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1204) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:636) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:508) at hudson.model.Run.execute(Run.java:1907) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:429) Caused: hudson.remoting.RequestAbortedException at hudson.remoting.Request.abort(Request.java:345) at hudson.remoting.Channel.terminate(Channel.java:1085) at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:89) [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Fri Jul 9 15:10:14 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 15:10:14 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_mas?= =?UTF-8?Q?ter-asn1c_=C2=BB_a1=3Ddefault,a2=3Dde?= =?UTF-8?Q?fault,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#1276?= Message-ID: <361613523.332.1625843414509@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 3.19 KB...] checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for autoconf... /usr/bin/autoconf checking for autoheader... /usr/bin/autoheader checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for bison... bison -y checking for flex... flex checking for yywrap in -lfl... no checking for yywrap in -ll... no checking lex output file root... lex.yy checking whether yytext is a pointer... no checking for ar... /usr/bin/ar checking for ANSI C header files... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking whether byte ordering is bigendian... no checking for off_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for intmax_t... yes checking for library containing getopt... none required checking for strtoimax... yes checking for strtoll... yes checking for mergesort... no checking for mkstemps... yes configure: creating ./config.status config.status: creating skeletons/standard-modules/Makefile config.status: creating skeletons/tests/Makefile config.status: creating libasn1compiler/Makefile config.status: creating libasn1parser/Makefile config.status: creating libasn1print/Makefile config.status: creating asn1c/webcgi/Makefile config.status: creating asn1c/tests/Makefile config.status: creating libasn1fix/Makefile config.status: creating skeletons/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating asn1c/Makefile config.status: creating doc/Makefile config.status: creating asn1c.spec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands + make -j 4 make all-recursive make[1]: Entering directory '/build' Making all in libasn1parser make[2]: Entering directory '/build/libasn1parser' if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF ".deps/asn1parser.Tpo" -c -o asn1parser.lo asn1parser.c; \ then mv -f ".deps/asn1parser.Tpo" ".deps/asn1parser.Plo"; else rm -f ".deps/asn1parser.Tpo"; exit 1; fi bison -y -p asn1p_ -d asn1p_y.y if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF ".deps/asn1p_l.Tpo" -c -o asn1p_l.lo asn1p_l.c; \ then mv -f ".deps/asn1p_l.Tpo" ".deps/asn1p_l.Plo"; else rm -f ".deps/asn1p_l.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF ".deps/asn1p_module.Tpo" -c -o asn1p_module.lo asn1p_module.c; \ then mv -f ".deps/asn1p_module.Tpo" ".deps/asn1p_module.Plo"; else rm -f ".deps/asn1p_module.Tpo"; exit 1; fi asn1p_y.y: warning: 2 shift/reduce conflicts [-Wconflicts-sr] mkdir .libs mkdir .libs mkdir: cannot create directory '.libs': File exists gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -fPIC -DPIC -o .libs/asn1p_l.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -fPIC -DPIC -o .libs/asn1parser.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -fPIC -DPIC -o .libs/asn1p_module.o asn1p_l.c:3521:12: warning: 'input' defined but not used [-Wunused-function] static int input() ^~~~~ gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -o asn1p_module.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -o asn1parser.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF ".deps/asn1p_oid.Tpo" -c -o asn1p_oid.lo asn1p_oid.c; \ then mv -f ".deps/asn1p_oid.Tpo" ".deps/asn1p_oid.Plo"; else rm -f ".deps/asn1p_oid.Tpo"; exit 1; fi if test -f y.tab.h; then \ to=`echo "asn1p_y_H" | sed \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \ sed -e "/^#/!b" -e "s/Y_TAB_H/$to/g" -e "s|y\.tab\.h|asn1p_y.h|" \ y.tab.h >asn1p_y.ht; \ rm -f y.tab.h; \ if cmp -s asn1p_y.ht asn1p_y.h; then \ rm -f asn1p_y.ht ;\ else \ mv asn1p_y.ht asn1p_y.h; \ fi; \ fi if test -f y.output; then \ mv y.output asn1p_y.output; \ fi sed '/^#/ s|y\.tab\.c|asn1p_y.c|' y.tab.c >asn1p_y.ct && mv asn1p_y.ct asn1p_y.c rm -f y.tab.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF ".deps/asn1p_value.Tpo" -c -o asn1p_value.lo asn1p_value.c; \ then mv -f ".deps/asn1p_value.Tpo" ".deps/asn1p_value.Plo"; else rm -f ".deps/asn1p_value.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF ".deps/asn1p_expr.Tpo" -c -o asn1p_expr.lo asn1p_expr.c; \ then mv -f ".deps/asn1p_expr.Tpo" ".deps/asn1p_expr.Plo"; else rm -f ".deps/asn1p_expr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -fPIC -DPIC -o .libs/asn1p_oid.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -fPIC -DPIC -o .libs/asn1p_value.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -fPIC -DPIC -o .libs/asn1p_expr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -o asn1p_oid.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -o asn1p_l.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -o asn1p_value.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -o asn1p_expr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF ".deps/asn1p_xports.Tpo" -c -o asn1p_xports.lo asn1p_xports.c; \ then mv -f ".deps/asn1p_xports.Tpo" ".deps/asn1p_xports.Plo"; else rm -f ".deps/asn1p_xports.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF ".deps/asn1p_constr.Tpo" -c -o asn1p_constr.lo asn1p_constr.c; \ then mv -f ".deps/asn1p_constr.Tpo" ".deps/asn1p_constr.Plo"; else rm -f ".deps/asn1p_constr.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF ".deps/asn1p_param.Tpo" -c -o asn1p_param.lo asn1p_param.c; \ then mv -f ".deps/asn1p_param.Tpo" ".deps/asn1p_param.Plo"; else rm -f ".deps/asn1p_param.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -fPIC -DPIC -o .libs/asn1p_xports.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -o asn1p_xports.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -fPIC -DPIC -o .libs/asn1p_constr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -fPIC -DPIC -o .libs/asn1p_param.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF ".deps/asn1p_class.Tpo" -c -o asn1p_class.lo asn1p_class.c; \ then mv -f ".deps/asn1p_class.Tpo" ".deps/asn1p_class.Plo"; else rm -f ".deps/asn1p_class.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -o asn1p_constr.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -o asn1p_param.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF ".deps/asn1p_ref.Tpo" -c -o asn1p_ref.lo asn1p_ref.c; \ then mv -f ".deps/asn1p_ref.Tpo" ".deps/asn1p_ref.Plo"; else rm -f ".deps/asn1p_ref.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -fPIC -DPIC -o .libs/asn1p_class.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF ".deps/asn1p_y.Tpo" -c -o asn1p_y.lo asn1p_y.c; \ then mv -f ".deps/asn1p_y.Tpo" ".deps/asn1p_y.Plo"; else rm -f ".deps/asn1p_y.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -o asn1p_class.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -fPIC -DPIC -o .libs/asn1p_ref.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF .deps/asn1p_y.Tpo -c asn1p_y.c -fPIC -DPIC -o .libs/asn1p_y.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -o asn1p_ref.o >/dev/null 2>&1 asn1p_y.y: In function 'asn1p_parse': asn1p_y.y:357:13: error: 'param' undeclared (first use in this function) *(void **)param = $1; ^~~~~ asn1p_y.y:357:13: note: each undeclared identifier is reported only once for each function it appears in Makefile:299: recipe for target 'asn1p_y.lo' failed make[2]: *** [asn1p_y.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory '/build/libasn1parser' make[1]: *** [all-recursive] Error 1 Makefile:302: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:212: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Fri Jul 9 16:07:37 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 16:07:37 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27213?= In-Reply-To: <1892377688.325.1625832894223@jenkins.osmocom.org> References: <1892377688.325.1625832894223@jenkins.osmocom.org> Message-ID: <1012679120.333.1625846857668@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.39 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_sock.o CC gtphub_main.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Fri Jul 9 16:09:50 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 16:09:50 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27214?= In-Reply-To: <1012679120.333.1625846857668@jenkins.osmocom.org> References: <1012679120.333.1625846857668@jenkins.osmocom.org> Message-ID: <669262523.334.1625846990170@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 247.17 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gb.o CC gprs_sm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_gmm_fsm.o CC gprs_gmm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Fri Jul 9 16:14:47 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 16:14:47 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27215?= In-Reply-To: <669262523.334.1625846990170@jenkins.osmocom.org> References: <669262523.334.1625846990170@jenkins.osmocom.org> Message-ID: <113304343.335.1625847287781@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 273.13 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC sgsn_ares.lo CC gprs_llc_parse.lo CC gprs_utils.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_fsm.o CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_sgsn.o CC gprs_mm_state_gb_fsm.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_ares.o CC gtphub_vty.o CC gtphub_sock.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Fri Jul 9 20:43:56 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 9 Jul 2021 20:43:56 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27216?= In-Reply-To: <113304343.335.1625847287781@jenkins.osmocom.org> References: <113304343.335.1625847287781@jenkins.osmocom.org> Message-ID: <1551158502.337.1625863436286@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.52 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 00:04:00 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 00:04:00 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27217?= In-Reply-To: <1551158502.337.1625863436286@jenkins.osmocom.org> References: <1551158502.337.1625863436286@jenkins.osmocom.org> Message-ID: <1068148281.338.1625875440981@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.79 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC sgsn_ares.lo CC gprs_utils.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_sgsn.o CC gprs_gmm.o CC gprs_gb.o CC gprs_sndcp.o CC gprs_mm_state_gb_fsm.o CC gprs_gmm_fsm.o CC gprs_sm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gtp_mme.o CC gprs_sndcp_xid.o CC sgsn_vty.o CC sgsn_main.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_ares.o CC gtphub_sock.o CC gtphub.o CC gtphub_vty.o CC gtphub_main.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 00:04:17 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 00:04:17 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27218?= In-Reply-To: <1068148281.338.1625875440981@jenkins.osmocom.org> References: <1068148281.338.1625875440981@jenkins.osmocom.org> Message-ID: <239452779.339.1625875457809@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.91 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC sgsn_ares.lo CC gprs_utils.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_sndcp.o CC gprs_sgsn.o CC gprs_mm_state_gb_fsm.o CC gprs_gmm_attach.o CC gprs_sm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 00:07:10 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 00:07:10 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27219?= In-Reply-To: <239452779.339.1625875457809@jenkins.osmocom.org> References: <239452779.339.1625875457809@jenkins.osmocom.org> Message-ID: <1645124753.340.1625875630790@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 248.24 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_ares.o CC gtphub_sock.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 00:11:34 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 00:11:34 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27220?= In-Reply-To: <1645124753.340.1625875630790@jenkins.osmocom.org> References: <1645124753.340.1625875630790@jenkins.osmocom.org> Message-ID: <1622291501.341.1625875894381@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 273.71 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_utils.lo CC gprs_llc_parse.lo CC crc24.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_fsm.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 00:17:28 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 00:17:28 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_master-osmo-trx_=C2=BB_--wit?= =?UTF-8?Q?h-neon-vfpv4,0,a3=3Ddefault,a4=3Ddefault,rpi4-raspbian10_#3092?= In-Reply-To: <1907144726.330.1625840438961@jenkins.osmocom.org> References: <1907144726.330.1625840438961@jenkins.osmocom.org> Message-ID: <1925883846.342.1625876248874@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Sat Jul 10 00:19:05 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 00:19:05 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_master-osmo-trx_=C2=BB_--?= =?UTF-8?Q?with-neon,0,a3=3Ddefault,a4=3Ddefault,rpi4-raspbian10_#3092?= In-Reply-To: <344835406.329.1625840437064@jenkins.osmocom.org> References: <344835406.329.1625840437064@jenkins.osmocom.org> Message-ID: <725865342.343.1625876345874@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Sat Jul 10 00:50:15 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 00:50:15 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27221?= In-Reply-To: <1622291501.341.1625875894381@jenkins.osmocom.org> References: <1622291501.341.1625875894381@jenkins.osmocom.org> Message-ID: <1143768553.344.1625878215839@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.05 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_llc_parse.lo CC gprs_gb_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_mm_state_gb_fsm.o CC gprs_sm.o CC gprs_gmm.o CC gprs_sgsn.o CC gprs_gb.o CC gprs_sndcp.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_ares.o CC gtphub_sock.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 00:52:35 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 00:52:35 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27222?= In-Reply-To: <1143768553.344.1625878215839@jenkins.osmocom.org> References: <1143768553.344.1625878215839@jenkins.osmocom.org> Message-ID: <643680789.345.1625878355484@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.48 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_fsm.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_sm.o CC gprs_sgsn.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_vty.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_main.o CC gtphub.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 00:57:24 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 00:57:24 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27223?= In-Reply-To: <643680789.345.1625878355484@jenkins.osmocom.org> References: <643680789.345.1625878355484@jenkins.osmocom.org> Message-ID: <1349122326.346.1625878644913@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 273.28 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 06:18:22 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 06:18:22 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27224?= In-Reply-To: <1349122326.346.1625878644913@jenkins.osmocom.org> References: <1349122326.346.1625878644913@jenkins.osmocom.org> Message-ID: <576890042.367.1625897902623@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.83 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC sgsn_ares.lo CC gprs_utils.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gb.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_gmm_fsm.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 06:19:31 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 06:19:31 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27225?= In-Reply-To: <576890042.367.1625897902623@jenkins.osmocom.org> References: <576890042.367.1625897902623@jenkins.osmocom.org> Message-ID: <1414399238.368.1625897971499@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.46 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC crc24.lo CC gprs_gb_parse.lo CC gprs_utils.lo CC gprs_llc_parse.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_fsm.o CC gprs_gmm_attach.o CC gprs_mm_state_gb_fsm.o CC gprs_gmm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_gb.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gtp_mme.o CC gprs_sndcp_xid.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o CC gtphub.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 06:23:48 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 06:23:48 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27226?= In-Reply-To: <1414399238.368.1625897971499@jenkins.osmocom.org> References: <1414399238.368.1625897971499@jenkins.osmocom.org> Message-ID: <1639132886.370.1625898228584@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.48 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_utils.lo CC sgsn_ares.lo CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_fsm.o CC gprs_gmm_attach.o CC gprs_sndcp.o CC gprs_sm.o CC gprs_gmm.o CC gprs_sgsn.o CC gprs_mm_state_gb_fsm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_ares.o CC gtphub_sock.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 07:36:32 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 07:36:32 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27227?= In-Reply-To: <1639132886.370.1625898228584@jenkins.osmocom.org> References: <1639132886.370.1625898228584@jenkins.osmocom.org> Message-ID: <1660806011.380.1625902592352@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 270.97 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 07:39:19 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 07:39:19 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27228?= In-Reply-To: <1660806011.380.1625902592352@jenkins.osmocom.org> References: <1660806011.380.1625902592352@jenkins.osmocom.org> Message-ID: <1307753931.381.1625902759210@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.23 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_ares.o CC gtphub_sock.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 10:56:48 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 10:56:48 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27229?= In-Reply-To: <1307753931.381.1625902759210@jenkins.osmocom.org> References: <1307753931.381.1625902759210@jenkins.osmocom.org> Message-ID: <1240393305.394.1625914608278@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 270.83 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_utils.lo CC gprs_llc_parse.lo CC crc24.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 15:16:48 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 15:16:48 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_norma?= =?UTF-8?Q?l_:_master-asn1c_=C2=BB_a1=3Ddefault,?= =?UTF-8?Q?a2=3Ddefault,a3=3Ddefault,a4=3Ddefau?= =?UTF-8?Q?lt,osmocom-master-debian9_#1277?= In-Reply-To: <361613523.332.1625843414509@jenkins.osmocom.org> References: <361613523.332.1625843414509@jenkins.osmocom.org> Message-ID: <696442734.409.1625930208478@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Sat Jul 10 16:07:35 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 16:07:35 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27230?= In-Reply-To: <1240393305.394.1625914608278@jenkins.osmocom.org> References: <1240393305.394.1625914608278@jenkins.osmocom.org> Message-ID: <7552154.410.1625933255903@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.39 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_main.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 16:09:34 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 16:09:34 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27231?= In-Reply-To: <7552154.410.1625933255903@jenkins.osmocom.org> References: <7552154.410.1625933255903@jenkins.osmocom.org> Message-ID: <937182079.411.1625933374160@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.82 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_gmm_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC gprs_llc.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_ares.o CC gtphub_vty.o CC gtphub_sock.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 16:14:45 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 16:14:45 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27232?= In-Reply-To: <937182079.411.1625933374160@jenkins.osmocom.org> References: <937182079.411.1625933374160@jenkins.osmocom.org> Message-ID: <2100802766.412.1625933685710@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 273.13 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm.o CC gprs_sgsn.o CC gprs_gb.o CC gprs_gmm_fsm.o CC gprs_sm.o CC gprs_mm_state_gb_fsm.o CC gprs_gmm_attach.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_ares.o CC gtphub_vty.o CC gtphub_sock.o CC gtphub_main.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sat Jul 10 20:43:56 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sat, 10 Jul 2021 20:43:56 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27233?= In-Reply-To: <2100802766.412.1625933685710@jenkins.osmocom.org> References: <2100802766.412.1625933685710@jenkins.osmocom.org> Message-ID: <123346687.414.1625949836329@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.51 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC crc24.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 00:04:22 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 00:04:22 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27235?= Message-ID: <478131354.415.1625961863014@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.71 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gb.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_sgsn.o CC gprs_mm_state_gb_fsm.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_main.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 00:04:32 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 00:04:32 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27234?= In-Reply-To: <123346687.414.1625949836329@jenkins.osmocom.org> References: <123346687.414.1625949836329@jenkins.osmocom.org> Message-ID: <882394649.416.1625961872931@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.68 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_llc_parse.lo CC gprs_gb_parse.lo CC gprs_utils.lo CC crc24.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gb.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_sock.o CC gtphub_main.o CC gtphub_ares.o CC gtphub.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 00:06:59 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 00:06:59 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27236?= In-Reply-To: <478131354.415.1625961863014@jenkins.osmocom.org> References: <478131354.415.1625961863014@jenkins.osmocom.org> Message-ID: <1526806741.417.1625962019626@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 273.13 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CC gprs_gb_parse.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_sgsn.o CC gprs_mm_state_gb_fsm.o CC gprs_sndcp.o CC gprs_sm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_main.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 00:11:53 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 00:11:53 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27237?= In-Reply-To: <1526806741.417.1625962019626@jenkins.osmocom.org> References: <1526806741.417.1625962019626@jenkins.osmocom.org> Message-ID: <775281456.418.1625962313268@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 274.22 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC sgsn_ares.lo CC gprs_utils.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gb.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_gmm_fsm.o CC gprs_sm.o CC gprs_sgsn.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_main.o CC gtphub_ares.o CC gtphub_vty.o CC gtphub_sock.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 00:50:17 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 00:50:17 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27238?= In-Reply-To: <775281456.418.1625962313268@jenkins.osmocom.org> References: <775281456.418.1625962313268@jenkins.osmocom.org> Message-ID: <1616794998.419.1625964617463@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.81 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_utils.lo CC sgsn_ares.lo CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_vty.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 00:52:39 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 00:52:39 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27239?= In-Reply-To: <1616794998.419.1625964617463@jenkins.osmocom.org> References: <1616794998.419.1625964617463@jenkins.osmocom.org> Message-ID: <488670099.420.1625964759325@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.92 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_llc_parse.lo CC gprs_gb_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gb.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_sndcp.o CC gprs_sm.o CC gprs_sgsn.o CC gprs_gmm_fsm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_sock.o CC gtphub_main.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 00:57:24 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 00:57:24 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27240?= In-Reply-To: <488670099.420.1625964759325@jenkins.osmocom.org> References: <488670099.420.1625964759325@jenkins.osmocom.org> Message-ID: <1106055269.421.1625965044894@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 273.28 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 06:18:21 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 06:18:21 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27241?= In-Reply-To: <1106055269.421.1625965044894@jenkins.osmocom.org> References: <1106055269.421.1625965044894@jenkins.osmocom.org> Message-ID: <1270479860.443.1625984301430@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.39 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_llc_parse.lo CC gprs_gb_parse.lo CC crc24.lo CC sgsn_ares.lo CC gprs_utils.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_sm.o CC gprs_sgsn.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_sock.o CC gtphub_main.o CC gtphub_vty.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 06:19:37 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 06:19:37 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27242?= In-Reply-To: <1270479860.443.1625984301430@jenkins.osmocom.org> References: <1270479860.443.1625984301430@jenkins.osmocom.org> Message-ID: <2040797207.444.1625984377419@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.78 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC sgsn_ares.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC gprs_gb_parse.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_sgsn.o CC gprs_gmm.o CC gprs_sm.o CC gprs_mm_state_gb_fsm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub.o CC gtphub_vty.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 06:23:29 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 06:23:29 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27243?= In-Reply-To: <2040797207.444.1625984377419@jenkins.osmocom.org> References: <2040797207.444.1625984377419@jenkins.osmocom.org> Message-ID: <1271783403.446.1625984609203@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.17 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 07:36:32 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 07:36:32 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27244?= In-Reply-To: <1271783403.446.1625984609203@jenkins.osmocom.org> References: <1271783403.446.1625984609203@jenkins.osmocom.org> Message-ID: <1690005452.455.1625988992683@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 270.73 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC sgsn_ares.lo CC gprs_utils.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gb.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_main.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 07:39:22 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 07:39:22 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27245?= In-Reply-To: <1690005452.455.1625988992683@jenkins.osmocom.org> References: <1690005452.455.1625988992683@jenkins.osmocom.org> Message-ID: <1524814861.456.1625989162760@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.79 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_llc_parse.lo CC gprs_gb_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_sock.o CC gtphub_main.o CC gtphub.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 10:56:49 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 10:56:49 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27246?= In-Reply-To: <1524814861.456.1625989162760@jenkins.osmocom.org> References: <1524814861.456.1625989162760@jenkins.osmocom.org> Message-ID: <263003961.469.1626001009120@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.28 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC crc24.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 16:07:36 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 16:07:36 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27247?= In-Reply-To: <263003961.469.1626001009120@jenkins.osmocom.org> References: <263003961.469.1626001009120@jenkins.osmocom.org> Message-ID: <1915962056.484.1626019656705@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.62 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 16:09:32 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 16:09:32 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27248?= In-Reply-To: <1915962056.484.1626019656705@jenkins.osmocom.org> References: <1915962056.484.1626019656705@jenkins.osmocom.org> Message-ID: <829313232.485.1626019772696@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.05 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CC crc24.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sndcp.o CC gprs_sm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_main.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 16:14:43 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 16:14:43 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27249?= In-Reply-To: <829313232.485.1626019772696@jenkins.osmocom.org> References: <829313232.485.1626019772696@jenkins.osmocom.org> Message-ID: <1141036576.486.1626020083936@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.46 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC sgsn_ares.lo CC crc24.lo CC gprs_utils.lo CC gprs_llc_parse.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_mm_state_gb_fsm.o CC gprs_gb.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_main.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: *** [gtphub.o] Error 1 make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Sun Jul 11 20:43:57 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 11 Jul 2021 20:43:57 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27250?= In-Reply-To: <1141036576.486.1626020083936@jenkins.osmocom.org> References: <1141036576.486.1626020083936@jenkins.osmocom.org> Message-ID: <1973840975.488.1626036237411@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 270.84 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sndcp.o CC gprs_sm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_main.o CC gtphub_sock.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 00:04:14 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 00:04:14 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27252?= Message-ID: <1851940056.489.1626048254764@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.47 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_utils.lo CC gprs_llc_parse.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 00:04:23 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 00:04:23 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27251?= In-Reply-To: <1973840975.488.1626036237411@jenkins.osmocom.org> References: <1973840975.488.1626036237411@jenkins.osmocom.org> Message-ID: <1236236121.490.1626048263750@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.45 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub_ares.o CC gtphub.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 00:07:04 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 00:07:04 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27253?= In-Reply-To: <1851940056.489.1626048254764@jenkins.osmocom.org> References: <1851940056.489.1626048254764@jenkins.osmocom.org> Message-ID: <977073546.491.1626048424762@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 273.13 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm.o CC gprs_gmm_attach.o CC gprs_gmm_fsm.o CC gprs_sm.o CC gprs_mm_state_gb_fsm.o CC gprs_sndcp.o CC gprs_sgsn.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gtp_mme.o CC gprs_sndcp_xid.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_vty.o CC gtphub_ares.o CC gtphub_sock.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/build/src' Makefile:461: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 00:11:26 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 00:11:26 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27254?= In-Reply-To: <977073546.491.1626048424762@jenkins.osmocom.org> References: <977073546.491.1626048424762@jenkins.osmocom.org> Message-ID: <1071594567.492.1626048686288@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 273.70 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_llc_parse.lo CC crc24.lo CC gprs_gb_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 00:50:20 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 00:50:20 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27255?= In-Reply-To: <1071594567.492.1626048686288@jenkins.osmocom.org> References: <1071594567.492.1626048686288@jenkins.osmocom.org> Message-ID: <2132068507.493.1626051020655@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.81 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC gprs_utils.lo CC gprs_llc_parse.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gb.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub.o CC gtphub_vty.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 00:52:37 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 00:52:37 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27256?= In-Reply-To: <2132068507.493.1626051020655@jenkins.osmocom.org> References: <2132068507.493.1626051020655@jenkins.osmocom.org> Message-ID: <580713891.494.1626051157223@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.48 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC sgsn_ares.lo CC crc24.lo CC gprs_utils.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_mm_state_gb_fsm.o CC gprs_gmm_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 00:57:26 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 00:57:26 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27257?= In-Reply-To: <580713891.494.1626051157223@jenkins.osmocom.org> References: <580713891.494.1626051157223@jenkins.osmocom.org> Message-ID: <1350501287.495.1626051446882@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 273.05 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub.o CC gtphub_main.o CC gtphub_sock.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 06:18:26 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 06:18:26 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27258?= In-Reply-To: <1350501287.495.1626051446882@jenkins.osmocom.org> References: <1350501287.495.1626051446882@jenkins.osmocom.org> Message-ID: <731459461.516.1626070706710@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.83 KB...] automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /build/missing autoheader) rm -f stamp-h1 touch bscconfig.h.in cd . && /bin/bash ./config.status bscconfig.h config.status: creating bscconfig.h config.status: bscconfig.h is unchanged make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC sgsn_ares.lo CC gprs_utils.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_mm_state_gb_fsm.o CC gprs_gb.o CC gprs_gmm_fsm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC v42bis.o CC gprs_llc_xid.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub_sock.o CC gtphub.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 06:19:31 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 06:19:31 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27259?= In-Reply-To: <731459461.516.1626070706710@jenkins.osmocom.org> References: <731459461.516.1626070706710@jenkins.osmocom.org> Message-ID: <348269192.517.1626070771218@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 272.02 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC sgsn_ares.lo CC crc24.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm.o CC gprs_sndcp.o CC gprs_mm_state_gb_fsm.o CC gprs_sm.o CC gprs_gmm_fsm.o CC gprs_gmm_attach.o CC gprs_sgsn.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_sock.o CC gtphub_main.o CC gtphub_vty.o CC gtphub_ares.o CC gtphub.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: *** [gtphub.o] Error 1 make[3]: Leaving directory '/build/src/gtphub' Makefile:394: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/build/src' Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 06:23:57 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 06:23:57 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27260?= In-Reply-To: <348269192.517.1626070771218@jenkins.osmocom.org> References: <348269192.517.1626070771218@jenkins.osmocom.org> Message-ID: <565267674.519.1626071037796@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.80 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC crc24.lo CC sgsn_ares.lo CC gprs_utils.lo CC gprs_llc_parse.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_mm_state_gb_fsm.o CC gprs_gmm_fsm.o CC gprs_sndcp.o CC gprs_sm.o CC gprs_gmm_attach.o CC gprs_gb.o CC gprs_gmm.o CC gprs_sgsn.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC gprs_llc.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_sock.o CC gtphub.o CC gtphub_main.o CC gtphub_ares.o CC gtphub_vty.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 07:36:32 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 07:36:32 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27261?= In-Reply-To: <565267674.519.1626071037796@jenkins.osmocom.org> References: <565267674.519.1626071037796@jenkins.osmocom.org> Message-ID: <817481543.530.1626075392699@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 270.73 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gmm_attach.o CC gprs_gb.o CC gprs_gmm_fsm.o CC gprs_gmm.o CC gprs_sndcp.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_sock.o CC gtphub_vty.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 07:39:17 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 07:39:17 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27262?= In-Reply-To: <817481543.530.1626075392699@jenkins.osmocom.org> References: <817481543.530.1626075392699@jenkins.osmocom.org> Message-ID: <894225263.531.1626075557781@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.79 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC gprs_utils.lo CC crc24.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o CC gprs_llc.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_main.o CC gtphub.o CC gtphub_vty.o CC gtphub_sock.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev cc1: all warnings being treated as errors Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[3]: *** [gtphub.o] Error 1 make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[1]: *** [all-recursive] Error 1 Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:393: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 10:04:25 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 10:04:25 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_Osmocom-repo-insta?= =?UTF-8?Q?ll-centos8_=C2=BB_nightly,repo-install-test_#240?= Message-ID: <1633528843.541.1626084265992@jenkins.osmocom.org> See Changes: [Oliver Smith] lint: checkpatch.pl: exclude pattern, not dir [Oliver Smith] lint: exclude *.ok, *.err [Oliver Smith] lint: ignore COMPLEX_MACRO [Oliver Smith] lint: ignore LINE_CONTINUATIONS [Oliver Smith] lint: checkpatch.pl: fix && complaints ------------------------------------------ [...truncated 11.79 KB...] + '[' -n network:osmocom:nightly ']' + echo 'Checking project: network:osmocom:nightly' + '[' -n network:osmocom:next ']' + echo 'Checking conflicting project: network:osmocom:next' Checking project: network:osmocom:nightly Checking conflicting project: network:osmocom:next + '[' -n centos8 ']' + echo 'Linux distribution: centos8' Linux distribution: centos8 + '[' -n ' test_conflict install_repo_packages test_binaries services_check ' ']' + echo 'Enabled tests: test_conflict install_repo_packages test_binaries services_check ' Enabled tests: test_conflict install_repo_packages test_binaries services_check + configure_keep_cache + '[' -z '' ']' + return + configure_osmocom_repo network:osmocom:nightly + case "$DISTRO" in + configure_osmocom_repo_centos network:osmocom:nightly + local proj=network:osmocom:nightly ++ proj_with_slashes network:osmocom:nightly ++ echo network:osmocom:nightly ++ sed s.:.:/.g + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/nightly/CentOS_8 + echo 'Configuring Osmocom repository' + cat Configuring Osmocom repository ++ proj_with_underscore network:osmocom:nightly ++ echo network:osmocom:nightly ++ tr : _ + for test in $TESTS + set +x + case "$test" in + test_conflict ### Running test: test_conflict ### + case "$DISTRO" in + test_conflict_centos + dnf -y install libosmocore-devel CentOS Linux 8 - AppStream 23 kB/s | 4.3 kB 00:00 CentOS Linux 8 - AppStream 43 MB/s | 8.1 MB 00:00 CentOS Linux 8 - BaseOS 21 kB/s | 3.9 kB 00:00 CentOS Linux 8 - BaseOS 7.0 MB/s | 3.6 MB 00:00 CentOS Linux 8 - Extras 4.9 kB/s | 1.5 kB 00:00 CentOS Linux 8 - Extras 172 kB/s | 9.8 kB 00:00 CentOS Linux 8 - PowerTools 8.1 MB/s | 2.3 MB 00:00 network:osmocom:nightly 591 kB/s | 222 kB 00:00 Dependencies resolved. ============================================================================================= Package Arch Version Repository Size ============================================================================================= Installing: libosmocore-devel x86_64 1.5.1.176.5aa42.202107120026-1.1 network_osmocom_nightly 71 k Installing dependencies: libosmocore17 x86_64 1.5.1.176.5aa42.202107120026-1.1 network_osmocom_nightly 98 k libpkgconf x86_64 1.4.2-1.el8 baseos 35 k libtalloc x86_64 2.3.1-2.el8 baseos 49 k libtalloc-devel x86_64 2.3.1-2.el8 baseos 63 k lksctp-tools x86_64 1.0.18-3.el8 baseos 100 k osmocom-nightly x86_64 1.0.0.202107120026-1.1 network_osmocom_nightly 7.0 k pkgconf x86_64 1.4.2-1.el8 baseos 38 k pkgconf-m4 noarch 1.4.2-1.el8 baseos 17 k pkgconf-pkg-config x86_64 1.4.2-1.el8 baseos 15 k Transaction Summary ============================================================================================= Install 10 Packages Total download size: 493 k Installed size: 1.0 M Downloading Packages: (1/10): libpkgconf-1.4.2-1.el8.x86_64.rpm 888 kB/s | 35 kB 00:00 (2/10): libtalloc-2.3.1-2.el8.x86_64.rpm 926 kB/s | 49 kB 00:00 (3/10): libtalloc-devel-2.3.1-2.el8.x86_64.rpm 1.1 MB/s | 63 kB 00:00 (4/10): lksctp-tools-1.0.18-3.el8.x86_64.rpm 3.6 MB/s | 100 kB 00:00 (5/10): pkgconf-1.4.2-1.el8.x86_64.rpm 2.7 MB/s | 38 kB 00:00 (6/10): pkgconf-m4-1.4.2-1.el8.noarch.rpm 1.2 MB/s | 17 kB 00:00 (7/10): pkgconf-pkg-config-1.4.2-1.el8.x86_64.r 833 kB/s | 15 kB 00:00 (8/10): libosmocore-devel-1.5.1.176.5aa42.20210 171 kB/s | 71 kB 00:00 (9/10): osmocom-nightly-1.0.0.202107120026-1.1. 17 kB/s | 7.0 kB 00:00 (10/10): libosmocore17-1.5.1.176.5aa42.20210712 222 kB/s | 98 kB 00:00 -------------------------------------------------------------------------------- Total 905 kB/s | 493 kB 00:00 warning: /var/cache/dnf/network_osmocom_nightly-8d6c2c122a187e40/packages/libosmocore-devel-1.5.1.176.5aa42.202107120026-1.1.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 17280ddf: NOKEY network:osmocom:nightly 30 kB/s | 1.1 kB 00:00 Importing GPG key 0x17280DDF: Userid : "network OBS Project " Fingerprint: 0080 689B E757 A876 CB7D C269 62EB 1A09 1728 0DDF From : https://download.opensuse.org/repositories/network:/osmocom:/nightly/CentOS_8/repodata/repomd.xml.key Key imported successfully Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : osmocom-nightly-1.0.0.202107120026-1.1.x86_64 1/10 Installing : libtalloc-2.3.1-2.el8.x86_64 2/10 Installing : pkgconf-m4-1.4.2-1.el8.noarch 3/10 Installing : lksctp-tools-1.0.18-3.el8.x86_64 4/10 Running scriptlet: lksctp-tools-1.0.18-3.el8.x86_64 4/10 Installing : libosmocore17-1.5.1.176.5aa42.202107120026-1.1.x86 5/10 Running scriptlet: libosmocore17-1.5.1.176.5aa42.202107120026-1.1.x86 5/10 Installing : libpkgconf-1.4.2-1.el8.x86_64 6/10 Installing : pkgconf-1.4.2-1.el8.x86_64 7/10 Installing : pkgconf-pkg-config-1.4.2-1.el8.x86_64 8/10 Installing : libtalloc-devel-2.3.1-2.el8.x86_64 9/10 Installing : libosmocore-devel-1.5.1.176.5aa42.202107120026-1.1 10/10 Running scriptlet: libosmocore-devel-1.5.1.176.5aa42.202107120026-1.1 10/10 Verifying : libpkgconf-1.4.2-1.el8.x86_64 1/10 Verifying : libtalloc-2.3.1-2.el8.x86_64 2/10 Verifying : libtalloc-devel-2.3.1-2.el8.x86_64 3/10 Verifying : lksctp-tools-1.0.18-3.el8.x86_64 4/10 Verifying : pkgconf-1.4.2-1.el8.x86_64 5/10 Verifying : pkgconf-m4-1.4.2-1.el8.noarch 6/10 Verifying : pkgconf-pkg-config-1.4.2-1.el8.x86_64 7/10 Verifying : libosmocore-devel-1.5.1.176.5aa42.202107120026-1.1 8/10 Verifying : libosmocore17-1.5.1.176.5aa42.202107120026-1.1.x86 9/10 Verifying : osmocom-nightly-1.0.0.202107120026-1.1.x86_64 10/10 Installed: libosmocore-devel-1.5.1.176.5aa42.202107120026-1.1.x86_64 libosmocore17-1.5.1.176.5aa42.202107120026-1.1.x86_64 libpkgconf-1.4.2-1.el8.x86_64 libtalloc-2.3.1-2.el8.x86_64 libtalloc-devel-2.3.1-2.el8.x86_64 lksctp-tools-1.0.18-3.el8.x86_64 osmocom-nightly-1.0.0.202107120026-1.1.x86_64 pkgconf-1.4.2-1.el8.x86_64 pkgconf-m4-1.4.2-1.el8.noarch pkgconf-pkg-config-1.4.2-1.el8.x86_64 Complete! + configure_osmocom_repo_centos_remove network:osmocom:nightly + local proj=network:osmocom:nightly + rm /etc/yum.repos.d/network:osmocom:nightly.repo + configure_osmocom_repo_centos network:osmocom:next + local proj=network:osmocom:next ++ proj_with_slashes network:osmocom:next ++ echo network:osmocom:next ++ sed s.:.:/.g + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/next/CentOS_8 + echo 'Configuring Osmocom repository' + cat Configuring Osmocom repository ++ proj_with_underscore network:osmocom:next ++ echo network:osmocom:next ++ tr : _ + dnf -y install osmo-mgw + tee /tmp/out network:osmocom:next 670 kB/s | 223 kB 00:00 Error: Problem: package osmo-mgw-1.8.1.31.97ca.202107120040-1.1.x86_64 requires osmocom-next = 1.0.0.202107120040, but none of the providers can be installed - package osmocom-nightly-1.0.0.202107120026-1.1.x86_64 conflicts with osmocom-next provided by osmocom-next-1.0.0.202107120040-1.1.x86_64 - package osmocom-next-1.0.0.202107120040-1.1.x86_64 conflicts with osmocom-nightly provided by osmocom-nightly-1.0.0.202107120026-1.1.x86_64 - cannot install the best candidate for the job - problem with installed package osmocom-nightly-1.0.0.202107120026-1.1.x86_64 (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) + '[' -e /tmp/fail ']' + find_patterns_or_exit /tmp/out '^Error:' 'but none of the providers can be installed' 'conflicts with osmocom-' + local file=/tmp/out + local pattern + shift + for pattern in "$@" + grep -q '^Error:' /tmp/out + continue + for pattern in "$@" + grep -q 'but none of the providers can be installed' /tmp/out + continue + for pattern in "$@" + grep -q 'conflicts with osmocom-' /tmp/out + continue + configure_osmocom_repo_centos_remove network:osmocom:next + local proj=network:osmocom:next + rm /etc/yum.repos.d/network:osmocom:next.repo + configure_osmocom_repo_centos network:osmocom:nightly + local proj=network:osmocom:nightly ++ proj_with_slashes network:osmocom:nightly ++ echo network:osmocom:nightly ++ sed s.:.:/.g Configuring Osmocom repository + local baseurl=https://download.opensuse.org/repositories/network:/osmocom:/nightly/CentOS_8 + echo 'Configuring Osmocom repository' + cat ++ proj_with_underscore network:osmocom:nightly ++ echo network:osmocom:nightly ++ tr : _ + set +x + for test in $TESTS + set +x ### Test successful: test_conflict ### ### Running test: install_repo_packages ### + case "$test" in + install_repo_packages + case "$DISTRO" in + install_repo_packages_centos Installing all repository packages + echo 'Installing all repository packages' ++ proj_with_underscore network:osmocom:nightly ++ echo network:osmocom:nightly ++ tr : _ + LANG=C.UTF-8 + repoquery --quiet --repoid=network_osmocom_nightly --archlist=x86_64,noarch '--qf=%{name}' + filter_packages_txt + grep -v '^#' /repo-install-test/blacklist_centos8.txt + sort -u + comm -23 osmocom_packages_all.txt blacklist.txt ++ cat osmocom_packages.txt + dnf install -y fdupes fdupes-debuginfo fdupes-debugsource libasn1c-debugsource libasn1c-devel libasn1c1 libasn1c1-debuginfo libcsv-debugsource libcsv-devel libcsv3 libcsv3-debuginfo libdbi libdbi-dbd-mysql libdbi-dbd-mysql-debuginfo libdbi-dbd-pgsql libdbi-dbd-pgsql-debuginfo libdbi-dbd-sqlite libdbi-dbd-sqlite-debuginfo libdbi-debuginfo libdbi-debugsource libdbi-devel libdbi-doc libdbi-drivers libdbi-drivers-debuginfo libdbi-drivers-debugsource libgtp-devel libgtp6 libgtp6-debuginfo libgtpnl-debuginfo libgtpnl-debugsource libgtpnl-devel libgtpnl-tools libgtpnl-tools-debuginfo libgtpnl0 libgtpnl0-debuginfo libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-debuginfo liborcania2_2 liborcania2_2-debuginfo libortp9 libortp9-debuginfo libosmo-abis-debuginfo libosmo-abis-debugsource libosmo-gsup-client-devel libosmo-gsup-client-devel-debuginfo libosmo-gsup-client0 libosmo-gsup-client0-debuginfo libosmo-mgcp-client-devel libosmo-mgcp-client8 libosmo-mgcp-client8-debuginfo libosmo-mgcp-devel libosmo-mslookup-devel libosmo-mslookup0 libosmo-mslookup0-debuginfo libosmo-mtp-devel libosmo-netif-debugsource libosmo-ranap-devel libosmo-ranap3 libosmo-ranap3-debuginfo libosmo-rspro-devel libosmo-rspro1 libosmo-rspro1-debuginfo libosmo-sabp-devel libosmo-sabp0 libosmo-sabp0-debuginfo libosmo-sccp-debuginfo libosmo-sccp-debugsource libosmo-sccp-devel libosmo-sigtran-devel libosmo-sigtran5 libosmo-sigtran5-debuginfo libosmo-simtrace2-0 libosmo-simtrace2-0-debuginfo libosmo-simtrace2-devel libosmo-xua-devel libosmoabis-devel libosmoabis10 libosmoabis10-debuginfo libosmocodec-devel libosmocodec0 libosmocodec0-debuginfo libosmocoding-devel libosmocoding0 libosmocoding0-debuginfo libosmocore-debuginfo libosmocore-debugsource libosmocore-devel libosmocore-tools libosmocore-tools-debuginfo libosmocore17 libosmocore17-debuginfo libosmoctrl-devel libosmoctrl0 libosmoctrl0-debuginfo libosmogb-devel libosmogb12 libosmogb12-debuginfo libosmogsm-devel libosmogsm16 libosmogsm16-debuginfo libosmonetif-devel libosmonetif8 libosmonetif8-debuginfo libosmosim-devel libosmosim2 libosmosim2-debuginfo libosmotrau-devel libosmotrau2 libosmotrau2-debuginfo libosmousb-devel libosmousb0 libosmousb0-debuginfo libosmovty-devel libosmovty9 libosmovty9-debuginfo libpgm-5_2-0 libpgm-5_2-0-debuginfo libsmpp34-1 libsmpp34-1-debuginfo libsmpp34-1-devel libsmpp34-debugsource libsodium-debugsource libsodium-devel libsodium23 libsodium23-debuginfo libsofia-sip-ua-glib3 libsofia-sip-ua-glib3-debuginfo libsofia-sip-ua0 libsofia-sip-ua0-debuginfo libulfius2_7 libulfius2_7-debuginfo libunwind libunwind-debuginfo libunwind-debugsource libunwind-devel libyder1_4 libyder1_4-debuginfo libzmq5 libzmq5-debuginfo openpgm-debugsource openpgm-devel orcania-debuginfo orcania-debugsource orcania-devel orcania-devel-debuginfo ortp-debugsource ortp-devel osmo-bsc osmo-bsc-abisip-find osmo-bsc-abisip-find-debuginfo osmo-bsc-bs11-utils osmo-bsc-bs11-utils-debuginfo osmo-bsc-debuginfo osmo-bsc-debugsource osmo-bsc-ipaccess-utils osmo-bsc-ipaccess-utils-debuginfo osmo-bsc-meas-utils osmo-bsc-meas-utils-debuginfo osmo-bts osmo-bts-debuginfo osmo-bts-debugsource osmo-bts-omldummy osmo-bts-omldummy-debuginfo osmo-bts-virtual osmo-bts-virtual-debuginfo osmo-cbc osmo-cbc-debuginfo osmo-cbc-debugsource osmo-cbc-utils osmo-gbproxy osmo-gbproxy-debuginfo osmo-gbproxy-debugsource osmo-ggsn osmo-ggsn-debuginfo osmo-ggsn-debugsource osmo-gtphub osmo-gtphub-debuginfo osmo-hlr osmo-hlr-debuginfo osmo-hlr-debugsource osmo-iuh osmo-iuh-debuginfo osmo-iuh-debugsource osmo-mgw osmo-mgw-debuginfo osmo-mgw-debugsource osmo-msc osmo-msc-debuginfo osmo-msc-debugsource osmo-mslookup-client osmo-mslookup-client-debuginfo osmo-pcap osmo-pcap-debuginfo osmo-pcap-debugsource osmo-pcu osmo-pcu-debuginfo osmo-pcu-debugsource osmo-remsim-bankd osmo-remsim-bankd-debuginfo osmo-remsim-client-shell osmo-remsim-client-shell-debuginfo osmo-remsim-client-st2 osmo-remsim-client-st2-debuginfo osmo-remsim-debuginfo osmo-remsim-debugsource osmo-remsim-server osmo-remsim-server-debuginfo osmo-sgsn osmo-sgsn-debuginfo osmo-sgsn-debugsource osmo-sip-connector osmo-sip-connector-debuginfo osmo-sip-connector-debugsource osmo-smlc osmo-smlc-debuginfo osmo-smlc-debugsource osmo-stp osmo-stp-debuginfo osmo-trx osmo-trx-debuginfo osmo-trx-debugsource osmo-trx-ipc osmo-trx-ipc-debuginfo osmo-trx-ipc-test osmo-trx-ipc-test-debuginfo osmo-trx-uhd osmo-trx-uhd-debuginfo osmocom-nightly simtrace2 simtrace2-debuginfo simtrace2-debugsource sofia-sip sofia-sip-debuginfo sofia-sip-debugsource sofia-sip-devel uhd uhd-debuginfo uhd-debugsource uhd-devel uhd-doc uhd-firmware uhd-tools uhd-tools-debuginfo ulfius-debuginfo ulfius-debugsource uwsc uwsc-debuginfo yder-debugsource yder-devel zeromq-debuginfo zeromq-debugsource zeromq-devel zeromq-tools zeromq-tools-debuginfo Package libosmocore-devel-1.5.1.176.5aa42.202107120026-1.1.x86_64 is already installed. Package libosmocore17-1.5.1.176.5aa42.202107120026-1.1.x86_64 is already installed. Package osmocom-nightly-1.0.0.202107120026-1.1.x86_64 is already installed. Error: Problem 1: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202107110026 needed by osmo-bsc-1.7.0.185.05293.202107110026-1.1.x86_64 Problem 2: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202107110026 needed by osmo-bsc-abisip-find-1.7.0.185.05293.202107110026-1.1.x86_64 Problem 3: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202107110026 needed by osmo-bsc-bs11-utils-1.7.0.185.05293.202107110026-1.1.x86_64 Problem 4: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202107110026 needed by osmo-bsc-ipaccess-utils-1.7.0.185.05293.202107110026-1.1.x86_64 Problem 5: cannot install the best candidate for the job - nothing provides osmocom-nightly = 1.0.0.202107110026 needed by osmo-bsc-meas-utils-1.7.0.185.05293.202107110026-1.1.x86_64 (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) + ret=1 + [ -n ] + docker container kill centos8-repo-install-test-nightly centos8-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure From jenkins at lists.osmocom.org Mon Jul 12 10:38:22 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 10:38:22 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_Osmocom-repo-insta?= =?UTF-8?Q?ll-debian10_=C2=BB_latest,repo-install-test_#171?= Message-ID: <1105156171.544.1626086302240@jenkins.osmocom.org> See Changes: [Oliver Smith] lint: checkpatch.pl: exclude pattern, not dir [Oliver Smith] lint: exclude *.ok, *.err [Oliver Smith] lint: ignore COMPLEX_MACRO [Oliver Smith] lint: ignore LINE_CONTINUATIONS [Oliver Smith] lint: checkpatch.pl: fix && complaints ------------------------------------------ Started by upstream project "Osmocom-repo-install-debian10" build number 171 originally caused by: Started by timer Running as SYSTEM Building remotely on host2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 444ca841e65b1d4974c82ccb9d120b10bebff270 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 444ca841e65b1d4974c82ccb9d120b10bebff270 # timeout=10 Commit message: "lint: checkpatch.pl: fix && complaints" > git rev-list --no-walk d58b999e0f8ea2ae8f744192589f3e3923e1da6d # timeout=10 [repo-install-test] $ /bin/sh -xe /tmp/jenkins6325885185439820207.sh + export OSMO_BRANCH_DOCKER_PLAYGROUND=master + export FEED=latest + scripts/repo-install-test.sh debian10 + dirname scripts/repo-install-test.sh + . scripts/common.sh + dirname scripts/repo-install-test.sh + realpath scripts/.. + OSMO_CI_DIR= + OSMO_GIT_URL=https://git.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmocore libosmo-netif libosmo-sccp libsmpp34 libusrp osmo-bsc osmo-bts osmo-ggsn osmo-hlr osmo-iuh osmo-mgw osmo-msc osmo-pcu osmo-sgsn osmo-sip-connector osmo-sysmon osmo-trx osmocom-bb + OSMO_BRANCH_DOCKER_PLAYGROUND=master + DISTRO=debian10 + DISTROS= centos8 debian9 debian10 + check_usage + local i + [ debian10 = centos8 ] + [ debian10 = debian9 ] + [ debian10 = debian10 ] + return + docker_images_require debian10-repo-install-test + local oldpwd= + [ -L _docker_playground ] + [ -d _docker_playground ] + git clone https://git.osmocom.org/docker-playground/ _docker_playground Cloning into '_docker_playground'... + cd _docker_playground + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + git reset --hard origin/master HEAD is now at 9c6eda6 jenkins-common.sh: add NO_LIST_OSMO_PACKAGES + cd debian10-repo-install-test + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR= + realpath ../scripts/kernel-test + KERNEL_TEST_DIR= + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ x = x ] + VOL_BASE_DIR= + rm -rf + mkdir -p + [ ! -d ] + [ xjenkins-Osmocom-repo-install-debian10-feed=latest,label=repo-install-test-171 = x ] + basename + SUITE_NAME=debian10-repo-install-test + NET_NAME=debian10-repo-install-test + docker_images_require debian10-repo-install-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + docker_depends debian10-repo-install-test + local feed + depends= + [ -n ] + docker_distro_from_image_name debian10-repo-install-test + echo debian-stretch + distro_arg=debian-stretch + [ -z ] + docker_upstream_distro_from_image_name debian10-repo-install-test + echo debian:buster + upstream_distro_arg=debian:buster + docker_dir_from_image_name debian10-repo-install-test + echo debian10-repo-install-test + dir=debian10-repo-install-test + pull_arg=--pull + grep ^FROM ../debian10-repo-install-test/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + echo Building image: debian10-repo-install-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian10-repo-install-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian10-repo-install-test PULL=--pull UPSTREAM_DISTRO=debian:buster DISTRO=debian-stretch IMAGE=osmocom-build/debian10-repo-install-test make: Entering directory ' awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) rm -rf .common cp -r .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:buster \ --build-arg DISTRO=debian-stretch \ --build-arg OSMOCOM_REPO_MIRROR=http://download.opensuse.org \ --build-arg OSMOCOM_REPO_PATH=repositories/network:/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=http://download.opensuse.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --pull -t osmocom-build/debian10-repo-install-test:latest . Sending build context to Docker daemon 7.68kB Step 1/5 : ARG USER Step 2/5 : ARG REGISTRY=docker.io Step 3/5 : ARG UPSTREAM_DISTRO=debian:buster Step 4/5 : FROM ${REGISTRY}/${UPSTREAM_DISTRO} Get https://registry-1.docker.io/v2/: net/http: TLS handshake timeout ../make/Makefile:84: recipe for target 'docker-build' failed make: *** [docker-build] Error 1 make: Leaving directory ' + exit 1 Build step 'Execute shell' marked build as failure From jenkins at lists.osmocom.org Mon Jul 12 10:38:22 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 10:38:22 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_Osmocom-repo-insta?= =?UTF-8?Q?ll-debian10_=C2=BB_nightly,repo-install-test_#171?= Message-ID: <1344241828.545.1626086302266@jenkins.osmocom.org> See Changes: [Oliver Smith] lint: checkpatch.pl: exclude pattern, not dir [Oliver Smith] lint: exclude *.ok, *.err [Oliver Smith] lint: ignore COMPLEX_MACRO [Oliver Smith] lint: ignore LINE_CONTINUATIONS [Oliver Smith] lint: checkpatch.pl: fix && complaints ------------------------------------------ Started by upstream project "Osmocom-repo-install-debian10" build number 171 originally caused by: Started by timer Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 444ca841e65b1d4974c82ccb9d120b10bebff270 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 444ca841e65b1d4974c82ccb9d120b10bebff270 # timeout=10 Commit message: "lint: checkpatch.pl: fix && complaints" > git rev-list --no-walk d58b999e0f8ea2ae8f744192589f3e3923e1da6d # timeout=10 [repo-install-test] $ /bin/sh -xe /tmp/jenkins3176632447062286039.sh + export OSMO_BRANCH_DOCKER_PLAYGROUND=master + export FEED=nightly + scripts/repo-install-test.sh debian10 + dirname scripts/repo-install-test.sh + . scripts/common.sh + dirname scripts/repo-install-test.sh + realpath scripts/.. + OSMO_CI_DIR= + OSMO_GIT_URL=https://git.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmocore libosmo-netif libosmo-sccp libsmpp34 libusrp osmo-bsc osmo-bts osmo-ggsn osmo-hlr osmo-iuh osmo-mgw osmo-msc osmo-pcu osmo-sgsn osmo-sip-connector osmo-sysmon osmo-trx osmocom-bb + OSMO_BRANCH_DOCKER_PLAYGROUND=master + DISTRO=debian10 + DISTROS= centos8 debian9 debian10 + check_usage + local i + [ debian10 = centos8 ] + [ debian10 = debian9 ] + [ debian10 = debian10 ] + return + docker_images_require debian10-repo-install-test + local oldpwd= + [ -L _docker_playground ] + [ -d _docker_playground ] + git clone https://git.osmocom.org/docker-playground/ _docker_playground Cloning into '_docker_playground'... + cd _docker_playground + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + git reset --hard origin/master HEAD is now at 9c6eda6 jenkins-common.sh: add NO_LIST_OSMO_PACKAGES + cd debian10-repo-install-test + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR= + realpath ../scripts/kernel-test + KERNEL_TEST_DIR= + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ x = x ] + VOL_BASE_DIR= + rm -rf + mkdir -p + [ ! -d ] + [ xjenkins-Osmocom-repo-install-debian10-feed=nightly,label=repo-install-test-171 = x ] + basename + SUITE_NAME=debian10-repo-install-test + NET_NAME=debian10-repo-install-test + docker_images_require debian10-repo-install-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + docker_depends debian10-repo-install-test + local feed + depends= + [ -n ] + docker_distro_from_image_name debian10-repo-install-test + echo debian-stretch + distro_arg=debian-stretch + [ -z ] + docker_upstream_distro_from_image_name debian10-repo-install-test + echo debian:buster + upstream_distro_arg=debian:buster + docker_dir_from_image_name debian10-repo-install-test + echo debian10-repo-install-test + dir=debian10-repo-install-test + pull_arg=--pull + grep ^FROM ../debian10-repo-install-test/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + echo Building image: debian10-repo-install-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian10-repo-install-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian10-repo-install-test PULL=--pull UPSTREAM_DISTRO=debian:buster DISTRO=debian-stretch IMAGE=osmocom-build/debian10-repo-install-test make: Entering directory ' awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) rm -rf .common cp -r .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:buster \ --build-arg DISTRO=debian-stretch \ --build-arg OSMOCOM_REPO_MIRROR=http://download.opensuse.org \ --build-arg OSMOCOM_REPO_PATH=repositories/network:/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=http://download.opensuse.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --pull -t osmocom-build/debian10-repo-install-test:latest . Sending build context to Docker daemon 7.68kB Step 1/5 : ARG USER Step 2/5 : ARG REGISTRY=docker.io Step 3/5 : ARG UPSTREAM_DISTRO=debian:buster Step 4/5 : FROM ${REGISTRY}/${UPSTREAM_DISTRO} Get https://registry-1.docker.io/v2/: net/http: TLS handshake timeout ../make/Makefile:84: recipe for target 'docker-build' failed make: *** [docker-build] Error 1 make: Leaving directory ' + exit 1 Build step 'Execute shell' marked build as failure From jenkins at lists.osmocom.org Mon Jul 12 10:40:21 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 10:40:21 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_Osmocom-repo-inst?= =?UTF-8?Q?all-debian9_=C2=BB_latest,repo-install-test_#172?= Message-ID: <1376226498.546.1626086421886@jenkins.osmocom.org> See Changes: [Oliver Smith] lint: checkpatch.pl: exclude pattern, not dir [Oliver Smith] lint: exclude *.ok, *.err [Oliver Smith] lint: ignore COMPLEX_MACRO [Oliver Smith] lint: ignore LINE_CONTINUATIONS [Oliver Smith] lint: checkpatch.pl: fix && complaints ------------------------------------------ Started by upstream project "Osmocom-repo-install-debian9" build number 172 originally caused by: Started by timer Running as SYSTEM Building remotely on host2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 444ca841e65b1d4974c82ccb9d120b10bebff270 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 444ca841e65b1d4974c82ccb9d120b10bebff270 # timeout=10 Commit message: "lint: checkpatch.pl: fix && complaints" > git rev-list --no-walk d58b999e0f8ea2ae8f744192589f3e3923e1da6d # timeout=10 [repo-install-test] $ /bin/sh -xe /tmp/jenkins1149461691020272588.sh + export OSMO_BRANCH_DOCKER_PLAYGROUND=master + export FEED=latest + scripts/repo-install-test.sh debian9 + dirname scripts/repo-install-test.sh + . scripts/common.sh + dirname scripts/repo-install-test.sh + realpath scripts/.. + OSMO_CI_DIR= + OSMO_GIT_URL=https://git.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmocore libosmo-netif libosmo-sccp libsmpp34 libusrp osmo-bsc osmo-bts osmo-ggsn osmo-hlr osmo-iuh osmo-mgw osmo-msc osmo-pcu osmo-sgsn osmo-sip-connector osmo-sysmon osmo-trx osmocom-bb + OSMO_BRANCH_DOCKER_PLAYGROUND=master + DISTRO=debian9 + DISTROS= centos8 debian9 debian10 + check_usage + local i + [ debian9 = centos8 ] + [ debian9 = debian9 ] + return + docker_images_require debian9-repo-install-test + local oldpwd= + [ -L _docker_playground ] + [ -d _docker_playground ] + git clone https://git.osmocom.org/docker-playground/ _docker_playground Cloning into '_docker_playground'... + cd _docker_playground + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + git reset --hard origin/master HEAD is now at 9c6eda6 jenkins-common.sh: add NO_LIST_OSMO_PACKAGES + cd debian9-repo-install-test + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR= + realpath ../scripts/kernel-test + KERNEL_TEST_DIR= + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ x = x ] + VOL_BASE_DIR= + rm -rf + mkdir -p + [ ! -d ] + [ xjenkins-Osmocom-repo-install-debian9-feed=latest,label=repo-install-test-172 = x ] + basename + SUITE_NAME=debian9-repo-install-test + NET_NAME=debian9-repo-install-test + docker_images_require debian9-repo-install-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + docker_depends debian9-repo-install-test + local feed + depends= + [ -n ] + docker_distro_from_image_name debian9-repo-install-test + echo debian-stretch + distro_arg=debian-stretch + [ -z ] + docker_upstream_distro_from_image_name debian9-repo-install-test + echo debian:stretch + upstream_distro_arg=debian:stretch + docker_dir_from_image_name debian9-repo-install-test + echo debian9-repo-install-test + dir=debian9-repo-install-test + pull_arg=--pull + grep ^FROM ../debian9-repo-install-test/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + echo Building image: debian9-repo-install-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian9-repo-install-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian9-repo-install-test PULL=--pull UPSTREAM_DISTRO=debian:stretch DISTRO=debian-stretch IMAGE=osmocom-build/debian9-repo-install-test make: Entering directory ' awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) rm -rf .common cp -r .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:stretch \ --build-arg DISTRO=debian-stretch \ --build-arg OSMOCOM_REPO_MIRROR=http://download.opensuse.org \ --build-arg OSMOCOM_REPO_PATH=repositories/network:/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=http://download.opensuse.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --pull -t osmocom-build/debian9-repo-install-test:latest . Sending build context to Docker daemon 7.68kB Step 1/5 : ARG USER Step 2/5 : ARG REGISTRY=docker.io Step 3/5 : ARG UPSTREAM_DISTRO=debian:stretch Step 4/5 : FROM ${REGISTRY}/${UPSTREAM_DISTRO} Get https://registry-1.docker.io/v2/: net/http: TLS handshake timeout ../make/Makefile:84: recipe for target 'docker-build' failed make: *** [docker-build] Error 1 make: Leaving directory ' + exit 1 Build step 'Execute shell' marked build as failure From jenkins at lists.osmocom.org Mon Jul 12 10:40:25 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 10:40:25 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_Osmocom-repo-insta?= =?UTF-8?Q?ll-debian9_=C2=BB_nightly,repo-install-test_#172?= Message-ID: <375862256.547.1626086425658@jenkins.osmocom.org> See Changes: [Oliver Smith] lint: checkpatch.pl: exclude pattern, not dir [Oliver Smith] lint: exclude *.ok, *.err [Oliver Smith] lint: ignore COMPLEX_MACRO [Oliver Smith] lint: ignore LINE_CONTINUATIONS [Oliver Smith] lint: checkpatch.pl: fix && complaints ------------------------------------------ Started by upstream project "Osmocom-repo-install-debian9" build number 172 originally caused by: Started by timer Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 444ca841e65b1d4974c82ccb9d120b10bebff270 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 444ca841e65b1d4974c82ccb9d120b10bebff270 # timeout=10 Commit message: "lint: checkpatch.pl: fix && complaints" > git rev-list --no-walk d58b999e0f8ea2ae8f744192589f3e3923e1da6d # timeout=10 [repo-install-test] $ /bin/sh -xe /tmp/jenkins5299842023623105442.sh + export OSMO_BRANCH_DOCKER_PLAYGROUND=master + export FEED=nightly + scripts/repo-install-test.sh debian9 + dirname scripts/repo-install-test.sh + . scripts/common.sh + dirname scripts/repo-install-test.sh + realpath scripts/.. + OSMO_CI_DIR= + OSMO_GIT_URL=https://git.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmocore libosmo-netif libosmo-sccp libsmpp34 libusrp osmo-bsc osmo-bts osmo-ggsn osmo-hlr osmo-iuh osmo-mgw osmo-msc osmo-pcu osmo-sgsn osmo-sip-connector osmo-sysmon osmo-trx osmocom-bb + OSMO_BRANCH_DOCKER_PLAYGROUND=master + DISTRO=debian9 + DISTROS= centos8 debian9 debian10 + check_usage + local i + [ debian9 = centos8 ] + [ debian9 = debian9 ] + return + docker_images_require debian9-repo-install-test + local oldpwd= + [ -L _docker_playground ] + [ -d _docker_playground ] + git clone https://git.osmocom.org/docker-playground/ _docker_playground Cloning into '_docker_playground'... + cd _docker_playground + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + git reset --hard origin/master HEAD is now at 9c6eda6 jenkins-common.sh: add NO_LIST_OSMO_PACKAGES + cd debian9-repo-install-test + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR= + realpath ../scripts/kernel-test + KERNEL_TEST_DIR= + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ x = x ] + VOL_BASE_DIR= + rm -rf + mkdir -p + [ ! -d ] + [ xjenkins-Osmocom-repo-install-debian9-feed=nightly,label=repo-install-test-172 = x ] + basename + SUITE_NAME=debian9-repo-install-test + NET_NAME=debian9-repo-install-test + docker_images_require debian9-repo-install-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + docker_depends debian9-repo-install-test + local feed + depends= + [ -n ] + docker_distro_from_image_name debian9-repo-install-test + echo debian-stretch + distro_arg=debian-stretch + [ -z ] + docker_upstream_distro_from_image_name debian9-repo-install-test + echo debian:stretch + upstream_distro_arg=debian:stretch + docker_dir_from_image_name debian9-repo-install-test + echo debian9-repo-install-test + dir=debian9-repo-install-test + pull_arg=--pull + grep ^FROM ../debian9-repo-install-test/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + echo Building image: debian9-repo-install-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian9-repo-install-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian9-repo-install-test PULL=--pull UPSTREAM_DISTRO=debian:stretch DISTRO=debian-stretch IMAGE=osmocom-build/debian9-repo-install-test make: Entering directory ' awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) rm -rf .common cp -r .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:stretch \ --build-arg DISTRO=debian-stretch \ --build-arg OSMOCOM_REPO_MIRROR=http://download.opensuse.org \ --build-arg OSMOCOM_REPO_PATH=repositories/network:/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=http://download.opensuse.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --pull -t osmocom-build/debian9-repo-install-test:latest . Sending build context to Docker daemon 7.68kB Step 1/5 : ARG USER Step 2/5 : ARG REGISTRY=docker.io Step 3/5 : ARG UPSTREAM_DISTRO=debian:stretch Step 4/5 : FROM ${REGISTRY}/${UPSTREAM_DISTRO} Get https://registry-1.docker.io/v2/: net/http: request canceled (Client.Timeout exceeded while awaiting headers) ../make/Makefile:84: recipe for target 'docker-build' failed make: *** [docker-build] Error 1 make: Leaving directory ' + exit 1 Build step 'Execute shell' marked build as failure From jenkins at lists.osmocom.org Mon Jul 12 10:56:48 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 10:56:48 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-osmo-sgsn_=C2=BB_--disable-i?= =?UTF-8?Q?u,1,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#27263?= In-Reply-To: <894225263.531.1626075557781@jenkins.osmocom.org> References: <894225263.531.1626075557781@jenkins.osmocom.org> Message-ID: <48874551.550.1626087408183@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 271.07 KB...] automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --enable-sanitize --enable-werror --disable-iu --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOGB... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... yes checking for LIBOSMOGSUPCLIENT... yes checking for LIBGTP... yes checking for LIBCARES... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether C compiler accepts -Werror=implicit... yes checking whether C compiler accepts -Werror=maybe-uninitialized... yes checking whether C compiler accepts -Werror=memset-transposed-args... yes checking whether C compiler accepts -Wnull-dereference... yes checking whether C compiler accepts -Werror=sizeof-array-argument... yes checking whether C compiler accepts -Werror=sizeof-pointer-memaccess... yes checking whether to enable code coverage support... no checking whether struct tm has tm_gmtoff member... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS="-g -O2 -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs -Werror=implicit -Werror=maybe-uninitialized -Werror=memset-transposed-args -Wnull-dereference -Werror=sizeof-array-argument -Werror=sizeof-pointer-memaccess" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sgsn/Makefile config.status: creating src/Makefile config.status: creating src/gprs/Makefile config.status: creating src/sgsn/Makefile config.status: creating src/gtphub/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/gprs/Makefile config.status: creating tests/sgsn/Makefile config.status: creating tests/gtphub/Makefile config.status: creating tests/xid/Makefile config.status: creating tests/sndcp_xid/Makefile config.status: creating tests/slhc/Makefile config.status: creating tests/v42bis/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sgsn.spec config.status: creating Makefile config.status: creating bscconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.7.0.22-e9336 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmocom make[3]: Entering directory '/build/include/osmocom' Making all in sgsn make[4]: Entering directory '/build/include/osmocom/sgsn' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/include/osmocom/sgsn' make[4]: Entering directory '/build/include/osmocom' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/include/osmocom' make[3]: Leaving directory '/build/include/osmocom' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in gprs make[3]: Entering directory '/build/src/gprs' CC gprs_gb_parse.lo CC gprs_llc_parse.lo CC crc24.lo CC gprs_utils.lo CC sgsn_ares.lo CCLD libcommon.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/gprs' Making all in sgsn make[3]: Entering directory '/build/src/sgsn' CC gprs_gb.o CC gprs_gmm_attach.o CC gprs_gmm.o CC gprs_gmm_fsm.o CC gprs_mm_state_gb_fsm.o CC gprs_sgsn.o CC gprs_sm.o CC gprs_sndcp.o CC gprs_sndcp_comp.o CC gprs_sndcp_dcomp.o CC gprs_sndcp_pcomp.o CC gprs_sndcp_vty.o CC gprs_sndcp_xid.o CC gtp_mme.o CC sgsn_main.o CC sgsn_vty.o CC sgsn_libgtp.o sgsn_libgtp.c: In function ?sgsn_gtp_init?: sgsn_libgtp.c:911:2: warning: ?gtp_set_cb_recovery2? is deprecated: Use gtp_set_cb_recovery3() instead, to obtain gsn handling the recovery [-Wdeprecated-declarations] gtp_set_cb_recovery2(gsn, cb_recovery2); ^~~~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/sgsn/sgsn.h:24:0, from sgsn_libgtp.c:47: /build/deps/install/stow/osmo-ggsn/include/gtp.h:388:5: note: declared here int gtp_set_cb_recovery2(struct gsn_t *gsn, ^~~~~~~~~~~~~~~~~~~~ CC gprs_llc.o CC gprs_llc_vty.o CC sgsn_ctrl.o CC sgsn_auth.o CC gprs_subscriber.o CC sgsn_cdr.o CC sgsn_rim.o CC slhc.o CC gprs_llc_xid.o CC v42bis.o CCLD osmo-sgsn make[3]: Leaving directory '/build/src/sgsn' Making all in gtphub make[3]: Entering directory '/build/src/gtphub' CC gtphub_sock.o CC gtphub_main.o CC gtphub.o CC gtphub_ares.o gtphub.c:68:0: error: "llist_last" redefined [-Werror] #define llist_last(head, type, entry) \ In file included from /build/deps/install/stow/libosmocore/include/osmocom/core/timer.h:46:0, from /build/deps/install/stow/osmo-ggsn/include/gtp.h:17, from gtphub.c:32: /build/deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h:245:0: note: this is the location of the previous definition #define llist_last(head) (head)->prev CC gtphub_vty.o cc1: all warnings being treated as errors make[3]: *** [gtphub.o] Error 1 Makefile:476: recipe for target 'gtphub.o' failed make[3]: Leaving directory '/build/src/gtphub' make[2]: *** [all-recursive] Error 1 Makefile:394: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' Makefile:461: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:393: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 12 12:13:56 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 12 Jul 2021 12:13:56 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_norm?= =?UTF-8?Q?al_:_master-osmo-sgsn_=C2=BB_--disa?= =?UTF-8?Q?ble-iu,1,a3=3Ddefault,a4=3Ddefault?= =?UTF-8?Q?,osmocom-master-debian9_#27264?= In-Reply-To: <48874551.550.1626087408183@jenkins.osmocom.org> References: <48874551.550.1626087408183@jenkins.osmocom.org> Message-ID: <1577381144.560.1626092036144@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Tue Jul 13 10:05:35 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Tue, 13 Jul 2021 10:05:35 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_Osmocom-repo-?= =?UTF-8?Q?install-centos8_=C2=BB_nightly,repo-install-test_#241?= In-Reply-To: <1633528843.541.1626084265992@jenkins.osmocom.org> References: <1633528843.541.1626084265992@jenkins.osmocom.org> Message-ID: <1746717370.607.1626170735899@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Tue Jul 13 10:43:47 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Tue, 13 Jul 2021 10:43:47 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_Osmocom-repo-i?= =?UTF-8?Q?nstall-debian10_=C2=BB_nightly,repo-install-test_#172?= In-Reply-To: <1344241828.545.1626086302266@jenkins.osmocom.org> References: <1344241828.545.1626086302266@jenkins.osmocom.org> Message-ID: <1829409094.610.1626173027438@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Tue Jul 13 10:44:05 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Tue, 13 Jul 2021 10:44:05 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_Osmocom-repo-?= =?UTF-8?Q?install-debian9_=C2=BB_latest,repo-install-test_#173?= In-Reply-To: <1376226498.546.1626086421886@jenkins.osmocom.org> References: <1376226498.546.1626086421886@jenkins.osmocom.org> Message-ID: <1673104225.611.1626173045667@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Tue Jul 13 10:44:10 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Tue, 13 Jul 2021 10:44:10 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_Osmocom-repo-?= =?UTF-8?Q?install-debian10_=C2=BB_latest,repo-install-test_#172?= In-Reply-To: <1105156171.544.1626086302240@jenkins.osmocom.org> References: <1105156171.544.1626086302240@jenkins.osmocom.org> Message-ID: <1071369886.612.1626173050742@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Tue Jul 13 10:46:09 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Tue, 13 Jul 2021 10:46:09 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_Osmocom-repo-?= =?UTF-8?Q?install-debian9_=C2=BB_nightly,repo-install-test_#173?= In-Reply-To: <375862256.547.1626086425658@jenkins.osmocom.org> References: <375862256.547.1626086425658@jenkins.osmocom.org> Message-ID: <578674987.613.1626173169052@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Fri Jul 16 16:09:37 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 16 Jul 2021 16:09:37 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_master-libosmocore_=C2=BB_a2=3Ddefault?= =?UTF-8?Q?,a3=3Ddefault,a4=3Ddefault,amd64,osmocom-master-debian9_#2347?= Message-ID: <325369322.85.1626451777395@jenkins.osmocom.org> See Changes: [laforge] Make gcc 11.1.0 false positivies happy ------------------------------------------ [...truncated 704.09 KB...] Generating docs for compound gsm48_cell_desc... Generating docs for compound gsm48_cell_options... Generating docs for compound gsm48_cell_sel_par... Generating docs for compound gsm48_chan_desc... Generating docs for compound gsm48_chan_mode_modify... Generating docs for compound gsm48_chan_rel... Generating docs for compound gsm48_cip_mode_cmd... Generating docs for compound gsm48_classmark1... Generating docs for compound gsm48_classmark2... Generating docs for compound gsm48_classmark3... Generating docs for compound gsm48_cm_change... Generating docs for compound gsm48_control_channel_descr... Generating docs for compound gsm48_frq_redef... Generating docs for compound gsm48_gprs_susp_req... Generating docs for compound gsm48_hdr... Generating docs for compound gsm48_ho_cmd... Generating docs for compound gsm48_ho_cpl... Generating docs for compound gsm48_ho_fail... Generating docs for compound gsm48_imm_ass... Generating docs for compound gsm48_imm_ass_ext... Generating docs for compound gsm48_imm_ass_rej... Generating docs for compound gsm48_imsi_detach_ind... Generating docs for compound gsm48_loc_area_id... Generating docs for compound gsm48_loc_upd_req... Generating docs for compound gsm48_meas_res... Generating docs for compound gsm48_multi_rate_conf... Generating docs for compound gsm48_pag_resp... Generating docs for compound gsm48_pag_rsp... Generating docs for compound gsm48_paging1... Generating docs for compound gsm48_paging2... Generating docs for compound gsm48_paging3... Generating docs for compound gsm48_power_cmd... Generating docs for compound gsm48_qos... Generating docs for compound gsm48_ra_id... Generating docs for compound gsm48_ra_upd_ack... Generating docs for compound gsm48_rach_control... Generating docs for compound gsm48_range_1024... Generating docs for compound gsm48_range_128... Generating docs for compound gsm48_range_256... Generating docs for compound gsm48_range_512... Generating docs for compound gsm48_req_ref... Generating docs for compound gsm48_rr_status... Generating docs for compound gsm48_service_request... Generating docs for compound gsm48_start_time... Generating docs for compound gsm48_sync_ind... Generating docs for compound gsm48_system_information_type_1... Generating docs for compound gsm48_system_information_type_13... Generating docs for compound gsm48_system_information_type_2... Generating docs for compound gsm48_system_information_type_2bis... Generating docs for compound gsm48_system_information_type_2quater... Generating docs for compound gsm48_system_information_type_2ter... Generating docs for compound gsm48_system_information_type_3... Generating docs for compound gsm48_system_information_type_4... Generating docs for compound gsm48_system_information_type_5... Generating docs for compound gsm48_system_information_type_5bis... Generating docs for compound gsm48_system_information_type_5ter... Generating docs for compound gsm48_system_information_type_6... Generating docs for compound gsm48_system_information_type_header... Generating docs for compound gsm48_var_bit... Generating docs for compound gsm_freq_range... Generating docs for compound gsm_meas_rep_unidir... Generating docs for compound gsm_mncc_bearer_cap... Generating docs for compound gsm_mncc_cause... Generating docs for compound gsm_mncc_cccap... Generating docs for compound gsm_mncc_facility... Generating docs for compound gsm_mncc_number... Generating docs for compound gsm_mncc_progress... Generating docs for compound gsm_mncc_ssversion... Generating docs for compound gsm_mncc_useruser... Generating docs for compound gsm_rx_lev_qual... Generating docs for compound gsm_sacch_l1_hdr... Generating docs for compound gsm_sysinfo_freq... Generating docs for compound gsm_time... Generating docs for compound info_act_cnf_param... Generating docs for compound info_act_req_param... Generating docs for compound info_ciph_req_param... Generating docs for compound info_meas_ind_param... Generating docs for compound info_time_ind_param... Generating docs for compound ipac_preproc_ave_cfg... Generating docs for compound ipac_preproc_cfg... Generating docs for compound ipac_preproc_ho_candidates... Generating docs for compound ipac_preproc_ho_comp... Generating docs for compound ipac_preproc_ho_ctl_param... Generating docs for compound ipac_preproc_ho_thresh... Generating docs for compound ipac_preproc_ncell_dflts... Generating docs for compound ipac_preproc_pc_comp... Generating docs for compound ipac_preproc_pc_thresh... Generating docs for compound ipaccess_head... Generating docs for compound ipaccess_head_ext... Generating docs for compound ipaccess_unit... Generating docs for compound l2downstate... Generating docs for compound lapd_cr_ent... Generating docs for compound lapd_datalink... Generating docs for compound lapd_history... Generating docs for compound lapd_msg_ctx... Generating docs for compound lapdm_channel... Generating docs for compound lapdm_datalink... Generating docs for compound lapdm_entity... Generating docs for compound lapdm_msg_ctx... Generating docs for compound lcs_cause_ie... Generating docs for compound mdl_error_ind_param... Generating docs for compound mph_info_param... Generating docs for compound osmo_auth_impl... Generating docs for compound osmo_auth_vector... Generating docs for compound osmo_bssap_le_err... Generating docs for compound osmo_bssap_le_header... Generating docs for compound osmo_bsslap_err... Generating docs for compound osmo_bssmap_le_err... Generating docs for compound osmo_cbsp_cell_ent... Generating docs for compound osmo_cbsp_cell_list... Generating docs for compound osmo_cbsp_content... Generating docs for compound osmo_cbsp_decoded... Generating docs for compound osmo_cbsp_error_ind... Generating docs for compound osmo_cbsp_fail_ent... Generating docs for compound osmo_cbsp_failure... Generating docs for compound osmo_cbsp_keep_alive... Generating docs for compound osmo_cbsp_keep_alive_complete... Generating docs for compound osmo_cbsp_kill... Generating docs for compound osmo_cbsp_kill_complete... Generating docs for compound osmo_cbsp_kill_failure... Generating docs for compound osmo_cbsp_load_query... Generating docs for compound osmo_cbsp_load_query_complete... Generating docs for compound osmo_cbsp_load_query_failure... Generating docs for compound osmo_cbsp_loading_ent... Generating docs for compound osmo_cbsp_loading_list... Generating docs for compound osmo_cbsp_msg_status_query... Generating docs for compound osmo_cbsp_msg_status_query_complete... Generating docs for compound osmo_cbsp_msg_status_query_failure... Generating docs for compound osmo_cbsp_num_compl_ent... Generating docs for compound osmo_cbsp_num_compl_list... Generating docs for compound osmo_cbsp_reset... Generating docs for compound osmo_cbsp_reset_complete... Generating docs for compound osmo_cbsp_reset_failure... Generating docs for compound osmo_cbsp_restart... Generating docs for compound osmo_cbsp_write_replace... Generating docs for compound osmo_cbsp_write_replace_complete... Generating docs for compound osmo_cbsp_write_replace_failure... Generating docs for compound osmo_cell_global_id... Generating docs for compound osmo_cell_global_id_ps... Generating docs for compound osmo_dlsap_prim... Generating docs for compound osmo_earfcn_si2q... Generating docs for compound osmo_eutran_cell_global_id... Generating docs for compound osmo_gad... Generating docs for compound osmo_gad_ell_arc... Generating docs for compound osmo_gad_ell_point... Generating docs for compound osmo_gad_ell_point_alt... Generating docs for compound osmo_gad_ell_point_alt_unc_ell... Generating docs for compound osmo_gad_ell_point_unc_circle... Generating docs for compound osmo_gad_ell_point_unc_ellipse... Generating docs for compound osmo_gad_err... Generating docs for compound osmo_gad_ha_ell_point_alt_unc_ell... Generating docs for compound osmo_gad_polygon... Generating docs for compound osmo_gcr_parsed... Generating docs for compound osmo_gsm48_classmark... Generating docs for compound osmo_gsm48_lsa_params... Generating docs for compound osmo_gsm48_si13_info... Generating docs for compound osmo_gsm48_si3_gprs_ind... Generating docs for compound osmo_gsm48_si6_ro_info... Generating docs for compound osmo_gsm48_si_dtm_support... Generating docs for compound osmo_gsm48_si_gprs_ms_txpwr_max_ccch... Generating docs for compound osmo_gsm48_si_pch_nch_info... Generating docs for compound osmo_gsm48_si_power_offset... Generating docs for compound osmo_gsm48_si_ro_info... Generating docs for compound osmo_gsm48_si_selection_params... Generating docs for compound osmo_gsm48_si_vbs_vgcs_options... Generating docs for compound osmo_gsn_address... Generating docs for compound osmo_gsup_an_apdu... Generating docs for compound osmo_gsup_message... Generating docs for compound osmo_gsup_pdp_info... Generating docs for compound osmo_gummei... Generating docs for compound osmo_guti... Generating docs for compound osmo_i460_schan_desc... Generating docs for compound osmo_i460_subchan... Generating docs for compound osmo_i460_subchan_demux... Generating docs for compound osmo_i460_subchan_mux... Generating docs for compound osmo_i460_timeslot... Generating docs for compound osmo_lac_and_ci_id... Generating docs for compound osmo_lcls... Generating docs for compound osmo_location_area_id... Generating docs for compound osmo_mme_id... Generating docs for compound osmo_nri_range... Generating docs for compound osmo_nri_ranges... Generating docs for compound osmo_oap_client_config... Generating docs for compound osmo_oap_client_state... Generating docs for compound osmo_oap_message... Generating docs for compound osmo_phsap_prim... Generating docs for compound osmo_plmn_id... Generating docs for compound osmo_routing_area_id... Generating docs for compound osmo_service_area_id... Generating docs for compound osmo_shared_network_area_id... Generating docs for compound osmo_sub_auth_data... Generating docs for compound osmo_tlv_prot_def... Generating docs for compound osmo_tlv_prot_ie_def... Generating docs for compound osmo_tlv_prot_msg_def... Generating docs for compound osmo_tracking_area_id... Generating docs for compound ph_conn_ind_param... Generating docs for compound ph_data_param... Generating docs for compound ph_rach_ind_param... Generating docs for compound ph_rach_req_param... Generating docs for compound ph_tch_param... Generating docs for compound rsl_ie_cb_cmd_type... Generating docs for compound rsl_ie_chan_ident... Generating docs for compound rsl_ie_chan_mode... Generating docs for compound rsl_l1_info... Generating docs for compound rsl_mrpci... Generating docs for compound rxlev_stats... Generating docs for compound sdp_firmware... Generating docs for compound sdp_header_entry... Generating docs for compound SHA1Context... Generating docs for compound sha256_state... Generating docs for compound smcdatastate... Generating docs for compound smcdownstate... Generating docs for compound smrdatastate... Generating docs for compound smrdownstate... Generating docs for compound ss_request... Generating docs for compound tlv_def... Generating docs for compound tlv_definition... Generating docs for compound tlv_p_entry... Generating docs for compound tlv_parsed... Generating docs for compound ussd_request... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... lookup cache used 10741/65536 hits=59980 misses=11031 finished... touch "doc/libosmogsm.tag.prep" make[2]: Leaving directory '/build/builddir' make[1]: *** [check-recursive] Error 1 Makefile:707: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build/builddir' make: *** [check] Error 2 Makefile:998: recipe for target 'check' failed + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Fri Jul 16 23:57:28 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 16 Jul 2021 23:57:28 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_norma?= =?UTF-8?Q?l_:_master-libosmocore_=C2=BB_a2=3Ddef?= =?UTF-8?Q?ault,a3=3Ddefault,a4=3Ddefault,amd?= =?UTF-8?Q?64,osmocom-master-debian9_#2348?= In-Reply-To: <325369322.85.1626451777395@jenkins.osmocom.org> References: <325369322.85.1626451777395@jenkins.osmocom.org> Message-ID: <2092352335.87.1626479848716@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Sun Jul 25 15:10:14 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Sun, 25 Jul 2021 15:10:14 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_mas?= =?UTF-8?Q?ter-asn1c_=C2=BB_a1=3Ddefault,a2=3Dde?= =?UTF-8?Q?fault,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#1292?= Message-ID: <1626933461.619.1627225814455@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 3.17 KB...] + ./configure checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for autoconf... /usr/bin/autoconf checking for autoheader... /usr/bin/autoheader checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for bison... bison -y checking for flex... flex checking for yywrap in -lfl... no checking for yywrap in -ll... no checking lex output file root... lex.yy checking whether yytext is a pointer... no checking for ar... /usr/bin/ar checking for ANSI C header files... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking whether byte ordering is bigendian... no checking for off_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for intmax_t... yes checking for library containing getopt... none required checking for strtoimax... yes checking for strtoll... yes checking for mergesort... no checking for mkstemps... yes configure: creating ./config.status config.status: creating skeletons/standard-modules/Makefile config.status: creating skeletons/tests/Makefile config.status: creating libasn1compiler/Makefile config.status: creating libasn1parser/Makefile config.status: creating libasn1print/Makefile config.status: creating asn1c/webcgi/Makefile config.status: creating asn1c/tests/Makefile config.status: creating libasn1fix/Makefile config.status: creating skeletons/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating asn1c/Makefile config.status: creating doc/Makefile config.status: creating asn1c.spec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands + make -j 4 make all-recursive make[1]: Entering directory '/build' Making all in libasn1parser make[2]: Entering directory '/build/libasn1parser' if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF ".deps/asn1parser.Tpo" -c -o asn1parser.lo asn1parser.c; \ then mv -f ".deps/asn1parser.Tpo" ".deps/asn1parser.Plo"; else rm -f ".deps/asn1parser.Tpo"; exit 1; fi bison -y -p asn1p_ -d asn1p_y.y if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF ".deps/asn1p_l.Tpo" -c -o asn1p_l.lo asn1p_l.c; \ then mv -f ".deps/asn1p_l.Tpo" ".deps/asn1p_l.Plo"; else rm -f ".deps/asn1p_l.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF ".deps/asn1p_module.Tpo" -c -o asn1p_module.lo asn1p_module.c; \ then mv -f ".deps/asn1p_module.Tpo" ".deps/asn1p_module.Plo"; else rm -f ".deps/asn1p_module.Tpo"; exit 1; fi asn1p_y.y: warning: 2 shift/reduce conflicts [-Wconflicts-sr] mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -fPIC -DPIC -o .libs/asn1parser.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -fPIC -DPIC -o .libs/asn1p_l.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -fPIC -DPIC -o .libs/asn1p_module.o asn1p_l.c:3521:12: warning: 'input' defined but not used [-Wunused-function] static int input() ^~~~~ gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -o asn1p_module.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -o asn1parser.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF ".deps/asn1p_oid.Tpo" -c -o asn1p_oid.lo asn1p_oid.c; \ then mv -f ".deps/asn1p_oid.Tpo" ".deps/asn1p_oid.Plo"; else rm -f ".deps/asn1p_oid.Tpo"; exit 1; fi if test -f y.tab.h; then \ to=`echo "asn1p_y_H" | sed \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \ sed -e "/^#/!b" -e "s/Y_TAB_H/$to/g" -e "s|y\.tab\.h|asn1p_y.h|" \ y.tab.h >asn1p_y.ht; \ rm -f y.tab.h; \ if cmp -s asn1p_y.ht asn1p_y.h; then \ rm -f asn1p_y.ht ;\ else \ mv asn1p_y.ht asn1p_y.h; \ fi; \ fi if test -f y.output; then \ mv y.output asn1p_y.output; \ fi sed '/^#/ s|y\.tab\.c|asn1p_y.c|' y.tab.c >asn1p_y.ct && mv asn1p_y.ct asn1p_y.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF ".deps/asn1p_value.Tpo" -c -o asn1p_value.lo asn1p_value.c; \ then mv -f ".deps/asn1p_value.Tpo" ".deps/asn1p_value.Plo"; else rm -f ".deps/asn1p_value.Tpo"; exit 1; fi rm -f y.tab.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF ".deps/asn1p_expr.Tpo" -c -o asn1p_expr.lo asn1p_expr.c; \ then mv -f ".deps/asn1p_expr.Tpo" ".deps/asn1p_expr.Plo"; else rm -f ".deps/asn1p_expr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -fPIC -DPIC -o .libs/asn1p_oid.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -fPIC -DPIC -o .libs/asn1p_value.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -fPIC -DPIC -o .libs/asn1p_expr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -o asn1p_oid.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -o asn1p_l.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -o asn1p_value.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -o asn1p_expr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF ".deps/asn1p_xports.Tpo" -c -o asn1p_xports.lo asn1p_xports.c; \ then mv -f ".deps/asn1p_xports.Tpo" ".deps/asn1p_xports.Plo"; else rm -f ".deps/asn1p_xports.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF ".deps/asn1p_constr.Tpo" -c -o asn1p_constr.lo asn1p_constr.c; \ then mv -f ".deps/asn1p_constr.Tpo" ".deps/asn1p_constr.Plo"; else rm -f ".deps/asn1p_constr.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF ".deps/asn1p_param.Tpo" -c -o asn1p_param.lo asn1p_param.c; \ then mv -f ".deps/asn1p_param.Tpo" ".deps/asn1p_param.Plo"; else rm -f ".deps/asn1p_param.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -fPIC -DPIC -o .libs/asn1p_xports.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -o asn1p_xports.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -fPIC -DPIC -o .libs/asn1p_constr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -fPIC -DPIC -o .libs/asn1p_param.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF ".deps/asn1p_class.Tpo" -c -o asn1p_class.lo asn1p_class.c; \ then mv -f ".deps/asn1p_class.Tpo" ".deps/asn1p_class.Plo"; else rm -f ".deps/asn1p_class.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -o asn1p_constr.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -o asn1p_param.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF ".deps/asn1p_ref.Tpo" -c -o asn1p_ref.lo asn1p_ref.c; \ then mv -f ".deps/asn1p_ref.Tpo" ".deps/asn1p_ref.Plo"; else rm -f ".deps/asn1p_ref.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -fPIC -DPIC -o .libs/asn1p_class.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF ".deps/asn1p_y.Tpo" -c -o asn1p_y.lo asn1p_y.c; \ then mv -f ".deps/asn1p_y.Tpo" ".deps/asn1p_y.Plo"; else rm -f ".deps/asn1p_y.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -fPIC -DPIC -o .libs/asn1p_ref.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -o asn1p_class.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF .deps/asn1p_y.Tpo -c asn1p_y.c -fPIC -DPIC -o .libs/asn1p_y.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -o asn1p_ref.o >/dev/null 2>&1 asn1p_y.y: In function 'asn1p_parse': asn1p_y.y:357:13: error: 'param' undeclared (first use in this function) *(void **)param = $1; ^~~~~ asn1p_y.y:357:13: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [asn1p_y.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... Makefile:299: recipe for target 'asn1p_y.lo' failed make[2]: Leaving directory '/build/libasn1parser' Makefile:302: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 Makefile:212: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Mon Jul 26 15:16:21 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Mon, 26 Jul 2021 15:16:21 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_norma?= =?UTF-8?Q?l_:_master-asn1c_=C2=BB_a1=3Ddefault,?= =?UTF-8?Q?a2=3Ddefault,a3=3Ddefault,a4=3Ddefau?= =?UTF-8?Q?lt,osmocom-master-debian9_#1293?= In-Reply-To: <1626933461.619.1627225814455@jenkins.osmocom.org> References: <1626933461.619.1627225814455@jenkins.osmocom.org> Message-ID: <1110051420.677.1627312581978@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Wed Jul 28 15:10:08 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Wed, 28 Jul 2021 15:10:08 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_mas?= =?UTF-8?Q?ter-asn1c_=C2=BB_a1=3Ddefault,a2=3Dde?= =?UTF-8?Q?fault,a3=3Ddefault,a4=3Ddefault,osmocom-master-debian9_#1295?= Message-ID: <1347778813.791.1627485008432@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 3.23 KB...] checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for autoconf... /usr/bin/autoconf checking for autoheader... /usr/bin/autoheader checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for bison... bison -y checking for flex... flex checking for yywrap in -lfl... no checking for yywrap in -ll... no checking lex output file root... lex.yy checking whether yytext is a pointer... no checking for ar... /usr/bin/ar checking for ANSI C header files... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking whether byte ordering is bigendian... no checking for off_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for intmax_t... yes checking for library containing getopt... none required checking for strtoimax... yes checking for strtoll... yes checking for mergesort... no checking for mkstemps... yes configure: creating ./config.status config.status: creating skeletons/standard-modules/Makefile config.status: creating skeletons/tests/Makefile config.status: creating libasn1compiler/Makefile config.status: creating libasn1parser/Makefile config.status: creating libasn1print/Makefile config.status: creating asn1c/webcgi/Makefile config.status: creating asn1c/tests/Makefile config.status: creating libasn1fix/Makefile config.status: creating skeletons/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating asn1c/Makefile config.status: creating doc/Makefile config.status: creating asn1c.spec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands + make -j 8 make all-recursive make[1]: Entering directory '/build' Making all in libasn1parser make[2]: Entering directory '/build/libasn1parser' if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF ".deps/asn1parser.Tpo" -c -o asn1parser.lo asn1parser.c; \ then mv -f ".deps/asn1parser.Tpo" ".deps/asn1parser.Plo"; else rm -f ".deps/asn1parser.Tpo"; exit 1; fi bison -y -p asn1p_ -d asn1p_y.y if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF ".deps/asn1p_l.Tpo" -c -o asn1p_l.lo asn1p_l.c; \ then mv -f ".deps/asn1p_l.Tpo" ".deps/asn1p_l.Plo"; else rm -f ".deps/asn1p_l.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF ".deps/asn1p_module.Tpo" -c -o asn1p_module.lo asn1p_module.c; \ then mv -f ".deps/asn1p_module.Tpo" ".deps/asn1p_module.Plo"; else rm -f ".deps/asn1p_module.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF ".deps/asn1p_oid.Tpo" -c -o asn1p_oid.lo asn1p_oid.c; \ then mv -f ".deps/asn1p_oid.Tpo" ".deps/asn1p_oid.Plo"; else rm -f ".deps/asn1p_oid.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF ".deps/asn1p_value.Tpo" -c -o asn1p_value.lo asn1p_value.c; \ then mv -f ".deps/asn1p_value.Tpo" ".deps/asn1p_value.Plo"; else rm -f ".deps/asn1p_value.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF ".deps/asn1p_expr.Tpo" -c -o asn1p_expr.lo asn1p_expr.c; \ then mv -f ".deps/asn1p_expr.Tpo" ".deps/asn1p_expr.Plo"; else rm -f ".deps/asn1p_expr.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF ".deps/asn1p_xports.Tpo" -c -o asn1p_xports.lo asn1p_xports.c; \ then mv -f ".deps/asn1p_xports.Tpo" ".deps/asn1p_xports.Plo"; else rm -f ".deps/asn1p_xports.Tpo"; exit 1; fi asn1p_y.y: warning: 2 shift/reduce conflicts [-Wconflicts-sr] mkdir .libs mkdir .libs mkdir: cannot create directory '.libs': File exists gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -fPIC -DPIC -o .libs/asn1p_module.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -fPIC -DPIC -o .libs/asn1parser.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -fPIC -DPIC -o .libs/asn1p_oid.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -fPIC -DPIC -o .libs/asn1p_l.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -fPIC -DPIC -o .libs/asn1p_value.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -fPIC -DPIC -o .libs/asn1p_expr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -fPIC -DPIC -o .libs/asn1p_xports.o asn1p_l.c:3521:12: warning: 'input' defined but not used [-Wunused-function] static int input() ^~~~~ gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -o asn1p_xports.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -o asn1parser.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -o asn1p_module.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -o asn1p_oid.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -o asn1p_value.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -o asn1p_expr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF ".deps/asn1p_constr.Tpo" -c -o asn1p_constr.lo asn1p_constr.c; \ then mv -f ".deps/asn1p_constr.Tpo" ".deps/asn1p_constr.Plo"; else rm -f ".deps/asn1p_constr.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF ".deps/asn1p_param.Tpo" -c -o asn1p_param.lo asn1p_param.c; \ then mv -f ".deps/asn1p_param.Tpo" ".deps/asn1p_param.Plo"; else rm -f ".deps/asn1p_param.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF ".deps/asn1p_class.Tpo" -c -o asn1p_class.lo asn1p_class.c; \ then mv -f ".deps/asn1p_class.Tpo" ".deps/asn1p_class.Plo"; else rm -f ".deps/asn1p_class.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF ".deps/asn1p_ref.Tpo" -c -o asn1p_ref.lo asn1p_ref.c; \ then mv -f ".deps/asn1p_ref.Tpo" ".deps/asn1p_ref.Plo"; else rm -f ".deps/asn1p_ref.Tpo"; exit 1; fi if test -f y.tab.h; then \ to=`echo "asn1p_y_H" | sed \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \ sed -e "/^#/!b" -e "s/Y_TAB_H/$to/g" -e "s|y\.tab\.h|asn1p_y.h|" \ y.tab.h >asn1p_y.ht; \ rm -f y.tab.h; \ if cmp -s asn1p_y.ht asn1p_y.h; then \ rm -f asn1p_y.ht ;\ else \ mv asn1p_y.ht asn1p_y.h; \ fi; \ fi if test -f y.output; then \ mv y.output asn1p_y.output; \ fi sed '/^#/ s|y\.tab\.c|asn1p_y.c|' y.tab.c >asn1p_y.ct && mv asn1p_y.ct asn1p_y.c rm -f y.tab.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF ".deps/asn1p_y.Tpo" -c -o asn1p_y.lo asn1p_y.c; \ then mv -f ".deps/asn1p_y.Tpo" ".deps/asn1p_y.Plo"; else rm -f ".deps/asn1p_y.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -fPIC -DPIC -o .libs/asn1p_param.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -fPIC -DPIC -o .libs/asn1p_constr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -fPIC -DPIC -o .libs/asn1p_class.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -fPIC -DPIC -o .libs/asn1p_ref.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF .deps/asn1p_y.Tpo -c asn1p_y.c -fPIC -DPIC -o .libs/asn1p_y.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -o asn1p_param.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -o asn1p_constr.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -o asn1p_ref.o >/dev/null 2>&1 asn1p_y.y: In function 'asn1p_parse': asn1p_y.y:357:13: error: 'param' undeclared (first use in this function) *(void **)param = $1; ^~~~~ asn1p_y.y:357:13: note: each undeclared identifier is reported only once for each function it appears in gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -o asn1p_l.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -o asn1p_class.o >/dev/null 2>&1 make[2]: *** [asn1p_y.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... Makefile:299: recipe for target 'asn1p_y.lo' failed make[2]: Leaving directory '/build/libasn1parser' make[1]: *** [all-recursive] Error 1 Makefile:302: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make: *** [all] Error 2 Makefile:212: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE From jenkins at lists.osmocom.org Thu Jul 29 10:46:40 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 29 Jul 2021 10:46:40 +0000 (UTC) Subject: =?UTF-8?Q?Build_failed_in_Jenkins:_Osmocom-repo-insta?= =?UTF-8?Q?ll-debian9_=C2=BB_nightly,repo-install-test_#189?= Message-ID: <435021836.831.1627555600406@jenkins.osmocom.org> See Changes: ------------------------------------------ [...truncated 368.30 KB...] Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DMAIN <0000> hnbgw_cn.c:461 IuCS remote addr not configured, using default: RI=SSN_PC,PC=0.23.1,SSN=RANAP Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DMAIN <0000> hnbgw_cn.c:461 IuPS remote addr not configured, using default: RI=SSN_PC,PC=0.23.4,SSN=RANAP Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DRANAP <0003> hnbgw_cn.c:512 No cs7 instance configured for IuCS nor IuPS, creating default instance Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSS7 <0010> osmo_ss7.c:385 0: Creating SS7 Instance Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSS7 <0010> osmo_ss7.c:685 0: Creating Route Table system Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DRANAP <0003> hnbgw_cn.c:525 Local SCCP addr: RI=SSN_PC,PC=0.23.5,SSN=RANAP Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSCCP <0011> sccp_user.c:548 OsmoHNBGW: Using SS7 instance 0, pc:0.23.5 Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSCCP <0011> sccp_user.c:555 OsmoHNBGW: Creating AS instance Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSS7 <0010> fsm.c:461 XUA_AS(as-clnt-OsmoHNBGW)[0x56311960d040]{AS_DOWN}: Allocated Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSS7 <0010> osmo_ss7.c:1013 0: as-as-clnt-OsmoHNBGW: Created AS Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSCCP <0011> sccp_user.c:566 OsmoHNBGW: Using AS instance as-clnt-OsmoHNBGW Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSCCP <0011> sccp_user.c:571 OsmoHNBGW: Creating default route Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSS7 <0010> osmo_ss7.c:829 0: Creating route: pc=0=0.0.0 mask=0x0 via AS 'as-clnt-OsmoHNBGW' Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSCCP <0011> sccp_user.c:611 OsmoHNBGW: No unassociated ASP for m3ua, creating new ASP asp-clnt-OsmoHNBGW Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSS7 <0010> osmo_ss7.c:1033 0: as-as-clnt-OsmoHNBGW: Adding ASP asp-clnt-OsmoHNBGW to AS Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSS7 <0010> fsm.c:461 xua_default_lm(asp-clnt-OsmoHNBGW)[0x56311960d5a0]{IDLE}: Allocated Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSS7 <0010> osmo_ss7.c:1482 0: asp-asp-clnt-OsmoHNBGW: Restarting ASP asp-clnt-OsmoHNBGW, r=localhost:2905<->l=localhost:0 Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSS7 <0010> fsm.c:461 XUA_ASP(asp-clnt-OsmoHNBGW)[0x563119611090]{ASP_DOWN}: Allocated Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSCCP <0011> sccp_user.c:638 OsmoHNBGW: Using ASP instance asp-clnt-OsmoHNBGW Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSS7 <0010> osmo_ss7.c:456 0: Creating SCCP instance Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625212 DLSCCP <0011> sccp_user.c:107 Binding user 'SCCP Maangement' to SSN=1 PC=(no PC) Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625213 DLSS7 <0010> osmo_ss7.c:480 registering user=SCCP for SI 3 with priv 0x5631196113b0 Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625213 DLSCCP <0011> sccp_user.c:107 Binding user 'OsmoHNBGW' to SSN=142 PC=0.23.5 Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625213 DRANAP <0003> hnbgw_cn.c:550 Remote SCCP addr: IuCS: RI=SSN_PC,PC=0.23.1,SSN=RANAP Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625213 DRANAP <0003> hnbgw_cn.c:552 Remote SCCP addr: IuPS: RI=SSN_PC,PC=0.23.4,SSN=RANAP Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625213 DHNBAP <0001> hnbgw.c:658 Using RNC-Id 23 Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625213 DMAIN <0000> hnbgw.c:663 Listening for Iuh at 0.0.0.0 29169 Jul 29 10:46:25 de6c909811e4 osmo-hnbgw[16070]: 20210729104625213 DLINP <0006> stream.c:286 [WAIT_RECONNECT] osmo_stream_cli_reconnect(): retrying in 5 seconds... + systemctl --no-pager -l -n 200 status osmo-bts-virtual ? osmo-bts-virtual.service - Osmocom GSM BTS for virtual Um layer based on GSMTAP/UDP Loaded: loaded (/lib/systemd/system/osmo-bts-virtual.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2021-07-29 10:46:25 UTC; 2s ago Main PID: 16069 (osmo-bts-virtua) Tasks: 1 (limit: 4915) CGroup: /docker/de6c909811e460519c39cc306c036d7e645f85868bede2b814f9980304916c38/system.slice/osmo-bts-virtual.service ??16069 /usr/bin/osmo-bts-virtual -s -c /etc/osmocom/osmo-bts-virtual.cfg Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:644 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[5] (165 ms) as sent by BSC due to suspected LAPDm bug! Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:644 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[6] (1680 ms) as sent by BSC due to suspected LAPDm bug! Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:89 NM_RCARRIER_OP(bts0-trx0)[0x5604990248b0]{DISABLED_NOTINSTALLED}: Received Event SW_ACT Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:62 NM_RCARRIER_OP(bts0-trx0)[0x5604990248b0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_OFFLINE Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE Power off -> Off line Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:90 NM_BBTRANSC_OP(bts0-trx0)[0x560499024b90]{DISABLED_NOTINSTALLED}: Received Event SW_ACT Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:64 NM_BBTRANSC_OP(bts0-trx0)[0x560499024b90]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_OFFLINE Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Power off -> Off line Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts0)[0x560499024de0]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts0)[0x560499024de0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Power off -> Dependency Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts1)[0x5604990253b0]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts1)[0x5604990253b0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Power off -> Dependency Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts2)[0x560499025a10]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts2)[0x560499025a10]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Power off -> Dependency Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts3)[0x560499026070]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts3)[0x560499026070]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Power off -> Dependency Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts4)[0x5604990266d0]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts4)[0x5604990266d0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Power off -> Dependency Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts5)[0x560499026d30]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts5)[0x560499026d30]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Power off -> Dependency Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts6)[0x560499027390]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts6)[0x560499027390]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Power off -> Dependency Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:67 NM_CHAN_OP(bts0-trx0-ts7)[0x5604990279f0]{DISABLED_NOTINSTALLED}: Received Event BBTRANSC_INSTALLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:72 NM_CHAN_OP(bts0-trx0-ts7)[0x5604990279f0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_DEPENDENCY Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Power off -> Dependency Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=GPRS-NSE(f0) INST=(00,ff,ff): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:743 OC=RADIO-CARRIER(02) INST=(00,00,ff): Set RF Max Power Reduction to 20 dBm Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DL1C <0006> bts_model.c:97 Unimplemented vbts_set_trx Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=RADIO-CARRIER(02) INST=(00,00,ff): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:221 (bts=0,trx=0): O&M Get Attributes [0], Manufacturer Dependent State is unsupported by TRX. Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,00): SET CHAN ATTR (TSC=7 pchan=CCCH+SDCCH4) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=0) Configured multiframe with 'BCCH+CCCH+SDCCH/4+SACCH/4' Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,00): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,01): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=1) Configured multiframe with 'TCH/F+SACCH' Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,01): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,02): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=2) Configured multiframe with 'TCH/F+SACCH' Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,02): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,03): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=3) Configured multiframe with 'TCH/F+SACCH' Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,03): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,04): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=4) Configured multiframe with 'TCH/F+SACCH' Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,04): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,05): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=5) Configured multiframe with 'TCH/F+SACCH' Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,05): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,06): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=6) Configured multiframe with 'TCH/F+SACCH' Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,06): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:981 OC=CHANNEL(03) INST=(00,00,07): SET CHAN ATTR (TSC=7 pchan=TCH/F) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DL1C <0006> scheduler.c:1027 (bts=0,trx=0,ts=7) Configured multiframe with 'TCH/F+SACCH' Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=CHANNEL(03) INST=(00,00,07): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=BTS(01) INST=(00,ff,ff): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:146 NM_RCARRIER_OP(bts0-trx0)[0x5604990248b0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:140 NM_RCARRIER_OP(bts0-trx0)[0x5604990248b0]{DISABLED_OFFLINE}: Delay switch to operative state Enabled, wait for: rsl Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1054 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ADM STATE Locked -> Unlocked Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:142 NM_BTS_OP(bts0)[0x560499024680]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bts_fsm.c:84 NM_BTS_OP(bts0)[0x560499024680]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=BTS INST=(00,ff,ff) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=BTS INST=(00,ff,ff) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:150 NM_BBTRANSC_OP(bts0-trx0)[0x560499024b90]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:149 NM_BBTRANSC_OP(bts0-trx0)[0x560499024b90]{DISABLED_OFFLINE}: Delay switch to operative state Enabled, wait for: rsl Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:1412 (bts=0,trx=0): Rx IPA RSL CONNECT IP=127.0.0.1 PORT=3003 STREAM=0x00 Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPCU <0009> pcu_sock.c:1183 PCU socket connected to external PCU Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DLINP <0012> input/ipa.c:128 127.0.0.1:3003 connection done Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:91 OC=GPRS-CELL INST=(00,ff,ff): Sending PCU version report to BSC: 0.9.0.124-945b Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DLINP <0012> input/ipaccess.c:898 received ID_GET for unit ID 6969/0/0 Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DABIS <000d> abis.c:329 RSL Signalling link for TRX0 up Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_trx.c:215 NM_RCARRIER_OP(bts0-trx0)[0x5604990248b0]{DISABLED_OFFLINE}: Received Event RSL_UP Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:135 NM_RCARRIER_OP(bts0-trx0)[0x5604990248b0]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts0)[0x560499024de0]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts1)[0x5604990253b0]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts2)[0x560499025a10]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts3)[0x560499026070]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts4)[0x5604990266d0]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts5)[0x560499026d30]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts6)[0x560499027390]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_radio_carrier_fsm.c:154 NM_CHAN_OP(bts0-trx0-ts7)[0x5604990279f0]{DISABLED_DEPENDENCY}: Received Event RCARRIER_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_trx.c:216 NM_BBTRANSC_OP(bts0-trx0)[0x560499024b90]{DISABLED_OFFLINE}: Received Event RSL_UP Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:144 NM_BBTRANSC_OP(bts0-trx0)[0x560499024b90]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts0)[0x560499024de0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts0)[0x560499024de0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Dependency -> Off line Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts1)[0x5604990253b0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts1)[0x5604990253b0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Dependency -> Off line Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts2)[0x560499025a10]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts2)[0x560499025a10]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Dependency -> Off line Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts3)[0x560499026070]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts3)[0x560499026070]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Dependency -> Off line Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts4)[0x5604990266d0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts4)[0x5604990266d0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Dependency -> Off line Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts5)[0x560499026d30]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts5)[0x560499026d30]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Dependency -> Off line Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts6)[0x560499027390]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts6)[0x560499027390]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Dependency -> Off line Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts7)[0x5604990279f0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:105 NM_CHAN_OP(bts0-trx0-ts7)[0x5604990279f0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Dependency -> Off line Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:433 Tx RSL RF RESource INDication Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:3571 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:518 Rx RSL BCCH INFO (SI1, 23 bytes) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:3571 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:518 Rx RSL BCCH INFO (SI2, 23 bytes) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:3571 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:607 RX RSL Disabling BCCH INFO (SI2bis) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:3571 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:607 RX RSL Disabling BCCH INFO (SI2ter) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:3571 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:607 RX RSL Disabling BCCH INFO (SI2quater) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:3571 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:518 Rx RSL BCCH INFO (SI3, 23 bytes) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> bts.c:571 Updated AGCH max queue length to 12 Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts0)[0x560499024de0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts0)[0x560499024de0]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:3571 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:518 Rx RSL BCCH INFO (SI4, 23 bytes) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:879 Rx RSL SACCH FILLING (SI5, 19 bytes) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:899 Rx RSL Disabling SACCH FILLING (SI5bis) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:899 Rx RSL Disabling SACCH FILLING (SI5ter) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:879 Rx RSL SACCH FILLING (SI6, 13 bytes) Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DPAG <0005> paging.c:720 Paging SI update Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DRSL <0000> rsl.c:1023 (bts=0,trx=0) Rx Measurement Pre-processing Defaults Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts1)[0x5604990253b0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts1)[0x5604990253b0]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts2)[0x560499025a10]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts2)[0x560499025a10]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts3)[0x560499026070]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts3)[0x560499026070]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts4)[0x5604990266d0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts4)[0x5604990266d0]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts5)[0x560499026d30]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts5)[0x560499026d30]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts6)[0x560499027390]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts6)[0x560499027390]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> bts_model.c:154 NM_CHAN_OP(bts0-trx0-ts7)[0x5604990279f0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> nm_channel_fsm.c:131 NM_CHAN_OP(bts0-trx0-ts7)[0x5604990279f0]{DISABLED_OFFLINE}: state_chg to ENABLED Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Off line -> OK Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Enabled Jul 29 10:46:25 de6c909811e4 osmo-bts-virtual[16069]: DL1P <0007> scheduler_virtbts.c:200 000002/00/02/02/02 (bts=0,trx=0,ts=0) BCCH: has not been served !! No prim + systemctl stop osmo-bsc osmo-gbproxy osmo-gtphub osmo-hlr osmo-mgw osmo-msc osmo-pcap-client osmo-sip-connector osmo-stp osmo-pcap-server osmo-sgsn osmo-pcu osmo-hnbgw osmo-bts-virtual + [ -n osmo-pcap-server ] + set +x ERROR: services failed to start: osmo-pcap-server + ret=1 + [ -n ] + docker container kill debian9-repo-install-test-nightly debian9-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure From jenkins at lists.osmocom.org Thu Jul 29 15:14:11 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Thu, 29 Jul 2021 15:14:11 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_norma?= =?UTF-8?Q?l_:_master-asn1c_=C2=BB_a1=3Ddefault,?= =?UTF-8?Q?a2=3Ddefault,a3=3Ddefault,a4=3Ddefau?= =?UTF-8?Q?lt,osmocom-master-debian9_#1296?= In-Reply-To: <1347778813.791.1627485008432@jenkins.osmocom.org> References: <1347778813.791.1627485008432@jenkins.osmocom.org> Message-ID: <1498472388.846.1627571651191@jenkins.osmocom.org> See From jenkins at lists.osmocom.org Fri Jul 30 10:46:27 2021 From: jenkins at lists.osmocom.org (jenkins at lists.osmocom.org) Date: Fri, 30 Jul 2021 10:46:27 +0000 (UTC) Subject: =?UTF-8?Q?Jenkins_build_is_back_to_normal_:_Osmocom-repo-?= =?UTF-8?Q?install-debian9_=C2=BB_nightly,repo-install-test_#190?= In-Reply-To: <435021836.831.1627555600406@jenkins.osmocom.org> References: <435021836.831.1627555600406@jenkins.osmocom.org> Message-ID: <1620987764.886.1627641987960@jenkins.osmocom.org> See