This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/jenkins-notifications@lists.osmocom.org/.
jenkins at lists.osmocom.org jenkins at lists.osmocom.orgSee <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=default,a3=default,a4=default,label=osmocom-master-debian9/8432/display/redirect?page=changes> Changes: [laforge] gsm_04_80: Avoid using deprecated API ------------------------------------------ [...truncated 594.19 KB...] channel-description bs-ag-blks-res 1 no access-control-class-ramping access-control-class-ramping-step-interval dynamic access-control-class-ramping-step-size 1 early-classmark-sending forbidden early-classmark-sending-3g allowed ipa unit-id 1800 0 oml ipa stream-id 255 line 0 neighbor-list mode automatic codec-support fr hr efr amr amr tch-f modes 0 2 4 7 amr tch-f threshold ms 32 32 32 amr tch-f hysteresis ms 8 8 8 amr tch-f threshold bts 32 32 32 amr tch-f hysteresis bts 8 8 8 amr tch-f start-mode auto amr tch-h modes 0 2 4 amr tch-h threshold ms 32 32 amr tch-h hysteresis ms 8 8 amr tch-h threshold bts 32 32 amr tch-h hysteresis bts 8 8 amr tch-h start-mode auto gprs mode none trx 0 rf_locked 0 arfcn 868 nominal power 23 max_power_red 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 msc 0 ip.access rtp-base 4000 no bsc-welcome-text no bsc-msc-lost-text no bsc-grace-text codec-list hr3 type normal allow-emergency deny amr-config 12_2k forbidden amr-config 10_2k forbidden amr-config 7_95k forbidden amr-config 7_40k forbidden amr-config 6_70k forbidden amr-config 5_90k allowed amr-config 5_15k forbidden amr-config 4_75k forbidden amr-payload octet-aligned asp-protocol m3ua lcls-mode disabled lcls-codec-mismatch forbidden bsc mid-call-timeout 0 no missing-msc-text cbc no remote-ip no listen-port end [1;36m<0004> bsc_init.c:52 shutting down OML for BTS 0 [0;msignal 15 received Terminating took 2.679s RESULTS: pass: ./handover_cfg.vty pass: ./neighbor_ident.vty pass: ./osmo-bsc.vty make[6]: Leaving directory '/build/tests' osmotestvty.py -p /build -w /build -v test_history (__main__.TestVTY) ... confpath /build, workdir /build Running tests for specific VTY commands Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build Opening /dev/null Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg' > ls -l /proc/12184/fd total 0 lr-x------ 1 build build 64 Dec 6 14:11 0 -> pipe:[3016779391] l-wx------ 1 build build 64 Dec 6 14:11 1 -> pipe:[3016779392] l-wx------ 1 build build 64 Dec 6 14:11 2 -> pipe:[3016779393] l-wx------ 1 build build 64 Dec 6 14:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 12184 0.0 0.0 53712 20540 ? S 14:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v build 12185 0.0 0.0 21474979752 21916 ? R 14:11 0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg build 12192 0.0 0.0 4276 732 ? S 14:11 0:00 /bin/sh -c ps xua | grep osmo build 12194 0.0 0.0 12780 948 ? S 14:11 0:00 grep osmo ERROR test_terminal_length (__main__.TestVTY) ... Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 52726), raddr=('127.0.0.1', 4242)> (1 sockets open) Socket: closing 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 52726), raddr=('127.0.0.1', 4242)> (0 sockets open) Terminating took 2.679s Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg' > ls -l /proc/12184/fd total 0 lr-x------ 1 build build 64 Dec 6 14:11 0 -> pipe:[3016779391] l-wx------ 1 build build 64 Dec 6 14:11 1 -> pipe:[3016779392] l-wx------ 1 build build 64 Dec 6 14:11 2 -> pipe:[3016779393] l-wx------ 1 build build 64 Dec 6 14:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 12184 3.7 0.0 53968 20724 ? S 14:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v build 12196 0.0 0.0 21474979692 21904 ? R 14:11 0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg build 12203 0.0 0.0 4276 716 ? S 14:11 0:00 /bin/sh -c ps xua | grep osmo build 12205 0.0 0.0 12780 932 ? S 14:11 0:00 grep osmo ERROR test_unknown_command (__main__.TestVTY) ... Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 52774), raddr=('127.0.0.1', 4242)> (1 sockets open) Socket: closing 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 52774), raddr=('127.0.0.1', 4242)> (0 sockets open) Terminating took 2.679s Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg' > ls -l /proc/12184/fd total 0 lr-x------ 1 build build 64 Dec 6 14:11 0 -> pipe:[3016779391] l-wx------ 1 build build 64 Dec 6 14:11 1 -> pipe:[3016779392] l-wx------ 1 build build 64 Dec 6 14:11 2 -> pipe:[3016779393] l-wx------ 1 build build 64 Dec 6 14:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 12184 2.1 0.0 53968 20728 ? S 14:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v build 12207 0.0 0.0 21474979340 20864 ? R 14:11 0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg build 12214 0.0 0.0 4276 724 ? S 14:11 0:00 /bin/sh -c ps xua | grep osmo build 12216 0.0 0.0 12780 948 ? S 14:11 0:00 grep osmo Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 52780), raddr=('127.0.0.1', 4242)> (1 sockets open) Socket: closing 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 52780), raddr=('127.0.0.1', 4242)> (0 sockets open) Terminating took 2.679s ERROR ====================================================================== ERROR: test_history (__main__.TestVTY) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/EGG-INFO/scripts/osmotestvty.py", line 55, in test_history self.vty.command(t1) File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 222, in command return self._common_command(request, close) File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 178, in _common_command self.socket.send("%s\r" % request) TypeError: a bytes-like object is required, not 'str' ====================================================================== ERROR: test_terminal_length (__main__.TestVTY) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/EGG-INFO/scripts/osmotestvty.py", line 65, in test_terminal_length assert(self.vty.verify(test_str, [''])) File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 244, in verify res = self.command(command, close).split('\r\n') File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 222, in command return self._common_command(request, close) File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 178, in _common_command self.socket.send("%s\r" % request) TypeError: a bytes-like object is required, not 'str' ====================================================================== ERROR: test_unknown_command (__main__.TestVTY) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/EGG-INFO/scripts/osmotestvty.py", line 61, in test_unknown_command assert(self.vty.verify(test_str, ['% Unknown command.'])) File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 244, in verify res = self.command(command, close).split('\r\n') File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 222, in command return self._common_command(request, close) File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py", line 178, in _common_command self.socket.send("%s\r" % request) TypeError: a bytes-like object is required, not 'str' ---------------------------------------------------------------------- Ran 3 tests in 10.555s FAILED (errors=3) Makefile:698: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/tests' make[5]: *** [python-tests] Error 3 Makefile:717: recipe for target 'check-local' failed make[4]: Leaving directory '/build/tests' make[4]: *** [check-local] Error 2 Makefile:558: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' make[3]: *** [check-am] Error 2 make[2]: *** [check-recursive] Error 1 Makefile:410: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' make[1]: *** [check-recursive] Error 1 Makefile:448: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build' Makefile:739: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE