<div dir="ltr">Hi,<div><br></div><div>I have made some captures on the L-band uplink channels and tried to decode the RACH messages. All four consecutive TCH channels (according to the spot beam) were recorded and a call was made during the recording.</div><div><br></div><div>I am using the GRC block gmr_rach_scan.grc. I have removed the IQ swap from the graph, as suggested in the mailing list. 

The sampling rate and samples-per-symbol values have  been set to 93.6k and 4, respectively. </div><div><br></div><div>It ran fine without any errors, but I couldn't see any results either on the wireshark or under /tmp/rach.txt.</div><div><br></div><div></div><div> Maybe I overlooked something here. Any ideas or remarks?</div><div><br></div><div>Many thanks,</div><div>Johann</div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div></div>