<div dir="ltr">Hi,<div><br></div><div>I have been looking into the example data provided by Osmocom as shown in the link below.</div><div><br></div><div><a href="http://osmocom.org/projects/gmr/wiki/Example_Data">http://osmocom.org/projects/gmr/wiki/Example_Data</a><br></div><div><br></div><div>I could reproduce the first pcap output (up to the Ciphering Mode Command) for the Voice call using the gmr1_rx_live from the live branch. </div><div><br></div><div>With the provided Kc, I thought I would be able to reproduce the second pcap (including the call setup). I have modified the sa_tch3.c to include the Kc code. However, I am not able to get the results as shown in the second pcap file. I noticed that in the sa_tch3.c code, there is a ciphering part (marked by "Retry with ciphering") which was disabled. This part of code didn't compile as some variables were not defined.</div><div><br></div><div>Probably my approach was not right. Any pointer here? Which code is needed to produce the second pcap (deciphered) file given the Kc is known?</div><div>Many thanks in advance.<br></div><div><br></div><div>Best regards,</div><div>Johann</div><div><br></div><div><br></div></div>