<div dir="ltr"><div>Hi,</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Jul 8, 2020 at 2:19 PM Andi Kita <<a href="mailto:akita@qmail.qcc.edu">akita@qmail.qcc.edu</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">What sdr are you using? <div dir="auto"><br></div><div dir="auto">I am trying to use usrp b200 and I was not able to make it work. I have read the research paper wrote by sylvain but that's for the old code. </div></div></blockquote><div><br></div><div>Research paper ?<br></div><div>I don't think I've ever written any of those ...</div><div><br></div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto"><div dir="auto">Is there anything or any other hardware that I could use? I have a b210 b200 bladerf x115 and a limesdr full board. I don't want to spend any money on the cube dongle and usrp1 are not made anymore.<br></div></div></blockquote><div><br></div><div>All of the above should work fine.</div><div>But you need a good RF setup. That means a good directional antenna with the right polarization, a good line of sight to the satellite and preferably external filters and LNA. Here I have so much out-of-band interference from terrestrial signals that without the cavity filter( <a href="http://shop.sysmocom.de/products/filter-rf-l-band">http://shop.sysmocom.de/products/filter-rf-l-band</a> ) the signals is very bad.  I also use a minicircuit LNA with very high linearity ( ~ 200 mA bias current IIRC ).</div><div><br></div><div>Then you can use the same command line as he did, just remove the `--args airspy` and replace with `--args uhd` for instance for a USRP. (you might have to select the right antenna as well make sure the LED light up where you have your stuff connected).</div><div><br></div><div><br></div><div><br></div><div>Cheers,</div><div><br></div><div>     Sylvain</div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
</blockquote></div>
</blockquote></div></div>