<div dir="ltr">Hi Sylvain,<div><br></div><div>Thank you for your quick reply. Much appreciated!</div><div><br></div><div>I will try your suggestions and come back to you when I have more results.</div><div><br></div><div>Best regards,</div><div>Johann</div><div><br></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Apr 30, 2020 at 6:53 PM Sylvain Munaut <<a href="mailto:246tnt@gmail.com">246tnt@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Hi Johann,<br>
<br>
So, first wrt to different formula, the spec is definitely right ...<br>
(I mean it's the spec ...).<br>
However they are narrow channels and if your B210 is not GPS<br>
disciplined, its oscillator could be out quite a bit. It's default<br>
xtal is only rated to +- 20ppm and that's a 30 kHz error at 1.5 GHz<br>
... so you can be off by a full channel just with that.<br>
<br>
Second, the frequency you give to gmr1_rx_sdr.py is where to tune. In<br>
reality you want to tune not to the channel directly but a bit to the<br>
side so that the DC offset and 1/f noise at the center of the capture<br>
don't mess up the data. The script will automatically filter and<br>
recenter the proper frequency depending on the -a argument you passed<br>
to it.<br>
<br>
Finally that python script only does the sample and channelization,<br>
and saves to a cfile in /tmp it doesn't do any of the decoding at all.<br>
For that you need to also run gmr1_rx binary ( or gmr1_rx_live , see<br>
the live branch ) on the recording. And it's that one that will take<br>
the raw samples do all the demod and decoding of the channels and send<br>
the data to wireshark.<br>
<br>
Cheers,<br>
<br>
    Sylvain<br>
</blockquote></div>