<p>laforge <strong>submitted</strong> this change.</p><p><a href="https://gerrit.osmocom.org/c/osmo-bts/+/22117">View Change</a></p><div style="white-space:pre-wrap">Approvals:
laforge: Looks good to me, approved
pespin: Looks good to me, but someone else must approve
Jenkins Builder: Verified
</div><pre style="font-family: monospace,monospace; white-space: pre-wrap;">power_control: print current RxLev and lower/upper thresholds<br><br>This makes the logging messages easier to read and understand.<br><br>Change-Id: I5f8c987054b2b01acdb9f525d06ca15bbc577070<br>Related: SYS#4918<br>---<br>M src/common/power_control.c<br>M tests/power/bs_power_loop_test.err<br>2 files changed, 65 insertions(+), 60 deletions(-)<br><br></pre><pre style="font-family: monospace,monospace; white-space: pre-wrap;"><span>diff --git a/src/common/power_control.c b/src/common/power_control.c</span><br><span>index 6620add..97baeb7 100644</span><br><span>--- a/src/common/power_control.c</span><br><span>+++ b/src/common/power_control.c</span><br><span>@@ -316,19 +316,24 @@</span><br><span> if (new < 0)</span><br><span> new = 0;</span><br><span> </span><br><span style="color: hsl(0, 100%, 40%);">- /* FIXME: this is only needed for logging, print thresholds instead */</span><br><span style="color: hsl(0, 100%, 40%);">- int target_dbm = rxlev2dbm(CALC_TARGET(params->rxlev_meas));</span><br><span style="color: hsl(0, 100%, 40%);">-</span><br><span> if (state->current != new) {</span><br><span> LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "Changing Downlink attenuation: "</span><br><span style="color: hsl(0, 100%, 40%);">- "%u -> %u dB (maximum %u dB, target %d dBm, delta %d dB)\n",</span><br><span style="color: hsl(0, 100%, 40%);">- state->current, new, state->max, target_dbm, delta);</span><br><span style="color: hsl(120, 100%, 40%);">+ "%u -> %u dB (maximum %u dB, delta %d dB, "</span><br><span style="color: hsl(120, 100%, 40%);">+ "RxLev current %u (%d dBm), thresholds %u .. %u)\n",</span><br><span style="color: hsl(120, 100%, 40%);">+ state->current, new, state->max,</span><br><span style="color: hsl(120, 100%, 40%);">+ delta, rxlev, rxlev2dbm(rxlev),</span><br><span style="color: hsl(120, 100%, 40%);">+ params->rxlev_meas.lower_thresh,</span><br><span style="color: hsl(120, 100%, 40%);">+ params->rxlev_meas.upper_thresh);</span><br><span> state->current = new;</span><br><span> return 1;</span><br><span> } else {</span><br><span> LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "Keeping Downlink attenuation "</span><br><span style="color: hsl(0, 100%, 40%);">- "at %u dB (maximum %u dB, target %d dBm, delta %d dB)\n",</span><br><span style="color: hsl(0, 100%, 40%);">- state->current, state->max, target_dbm, delta);</span><br><span style="color: hsl(120, 100%, 40%);">+ "at %u dB (maximum %u dB, delta %d dB, "</span><br><span style="color: hsl(120, 100%, 40%);">+ "RxLev current %u (%d dBm), thresholds %u .. %u)\n",</span><br><span style="color: hsl(120, 100%, 40%);">+ state->current, state->max,</span><br><span style="color: hsl(120, 100%, 40%);">+ delta, rxlev, rxlev2dbm(rxlev),</span><br><span style="color: hsl(120, 100%, 40%);">+ params->rxlev_meas.lower_thresh,</span><br><span style="color: hsl(120, 100%, 40%);">+ params->rxlev_meas.upper_thresh);</span><br><span> return 0;</span><br><span> }</span><br><span> }</span><br><span>diff --git a/tests/power/bs_power_loop_test.err b/tests/power/bs_power_loop_test.err</span><br><span>index e7ba310..db02199 100644</span><br><span>--- a/tests/power/bs_power_loop_test.err</span><br><span>+++ b/tests/power/bs_power_loop_test.err</span><br><span>@@ -1,69 +1,69 @@</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 6 -> 8 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 6 -> 8 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 10 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 10 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 12 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 12 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 14 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 14 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 16 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 16 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 18 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 18 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 18 -> 20 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 18 -> 20 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, delta -2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 20 -> 16 dB (maximum 20 dB, target -80 dBm, delta 4 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 20 -> 16 dB (maximum 20 dB, delta 4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 12 dB (maximum 20 dB, target -80 dBm, delta 4 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 12 dB (maximum 20 dB, delta 4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 8 dB (maximum 20 dB, target -80 dBm, delta 4 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 8 dB (maximum 20 dB, delta 4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 4 dB (maximum 20 dB, target -80 dBm, delta 4 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 4 dB (maximum 20 dB, delta 4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 0 dB (maximum 20 dB, target -80 dBm, delta 4 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 0 dB (maximum 20 dB, delta 4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 4 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 4 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(00), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(63), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(1), RXLEV-SUB(30), RXQUAL-SUB(1), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(2), RXLEV-SUB(30), RXQUAL-SUB(2), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(3), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(4), RXLEV-SUB(30), RXQUAL-SUB(4), DTx is disabled => using FULL</span><br><span> (bts=0,trx=0,ts=0,ss=0) Reducing Downlink attenuation: 16 -> 12 dB due to RxQual 4 worse than L_RXQUAL_XX_P 3</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(34), RXQUAL-FULL(5), RXLEV-SUB(34), RXQUAL-SUB(5), DTx is disabled => using FULL</span><br><span>@@ -74,46 +74,46 @@</span><br><span> (bts=0,trx=0,ts=0,ss=0) Reducing Downlink attenuation: 4 -> 0 dB due to RxQual 7 worse than L_RXQUAL_XX_P 3</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(7), RXLEV-SUB(46), RXQUAL-SUB(7), DTx is disabled => using FULL</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(0), RXLEV-SUB(46), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, delta -2 dB, RxLev current 46 (-64 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(44), RXQUAL-FULL(0), RXLEV-SUB(44), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, delta -2 dB, RxLev current 44 (-66 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(42), RXQUAL-FULL(0), RXLEV-SUB(42), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, delta -2 dB, RxLev current 42 (-68 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL</span><br><span> (bts=0,trx=0,ts=0,ss=0) The measurement results are not valid</span><br><span> (bts=0,trx=0,ts=0,ss=0) The measurement results are not valid</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 13 dB (maximum 16 dB, target -80 dBm, delta -1 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 13 dB (maximum 16 dB, delta -1 dB, RxLev current 31 (-79 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 11 dB (maximum 16 dB, target -80 dBm, delta 2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 11 dB (maximum 16 dB, delta 2 dB, RxLev current 28 (-82 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 13 dB (maximum 16 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 13 dB (maximum 16 dB, delta -2 dB, RxLev current 33 (-77 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 11 dB (maximum 16 dB, target -80 dBm, delta 2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 11 dB (maximum 16 dB, delta 2 dB, RxLev current 28 (-82 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, delta 0 dB, RxLev current 31 (-79 dBm), thresholds 27 .. 33)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, delta 0 dB, RxLev current 28 (-82 dBm), thresholds 27 .. 33)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, delta 0 dB, RxLev current 33 (-77 dBm), thresholds 27 .. 33)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, delta 0 dB, RxLev current 28 (-82 dBm), thresholds 27 .. 33)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 30 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 30 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 30 dB, target -80 dBm, delta 0 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 30 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 14 dB (maximum 30 dB, target -80 dBm, delta 2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 14 dB (maximum 30 dB, delta 2 dB, RxLev current 26 (-84 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 11 dB (maximum 30 dB, target -80 dBm, delta 3 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 11 dB (maximum 30 dB, delta 3 dB, RxLev current 26 (-84 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 12 dB (maximum 30 dB, target -80 dBm, delta -1 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 12 dB (maximum 30 dB, delta -1 dB, RxLev current 35 (-75 dBm), thresholds 30 .. 30)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 14 dB (maximum 30 dB, target -80 dBm, delta -2 dB)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 14 dB (maximum 30 dB, delta -2 dB, RxLev current 35 (-75 dBm), thresholds 30 .. 30)</span><br><span></span><br></pre><p>To view, visit <a href="https://gerrit.osmocom.org/c/osmo-bts/+/22117">change 22117</a>. To unsubscribe, or for help writing mail filters, visit <a href="https://gerrit.osmocom.org/settings">settings</a>.</p><div itemscope itemtype="http://schema.org/EmailMessage"><div itemscope itemprop="action" itemtype="http://schema.org/ViewAction"><link itemprop="url" href="https://gerrit.osmocom.org/c/osmo-bts/+/22117"/><meta itemprop="name" content="View Change"/></div></div>
<div style="display:none"> Gerrit-Project: osmo-bts </div>
<div style="display:none"> Gerrit-Branch: master </div>
<div style="display:none"> Gerrit-Change-Id: I5f8c987054b2b01acdb9f525d06ca15bbc577070 </div>
<div style="display:none"> Gerrit-Change-Number: 22117 </div>
<div style="display:none"> Gerrit-PatchSet: 2 </div>
<div style="display:none"> Gerrit-Owner: fixeria <vyanitskiy@sysmocom.de> </div>
<div style="display:none"> Gerrit-Reviewer: Jenkins Builder </div>
<div style="display:none"> Gerrit-Reviewer: laforge <laforge@osmocom.org> </div>
<div style="display:none"> Gerrit-Reviewer: pespin <pespin@sysmocom.de> </div>
<div style="display:none"> Gerrit-MessageType: merged </div>