<p>laforge <strong>submitted</strong> this change.</p><p><a href="https://gerrit.osmocom.org/c/osmo-e1-hardware/+/21775">View Change</a></p><div style="white-space:pre-wrap">Approvals:
Jenkins Builder: Verified
tnt: Looks good to me, but someone else must approve
laforge: Looks good to me, approved
</div><pre style="font-family: monospace,monospace; white-space: pre-wrap;">icE1usb fw: USB control request handling<br><br>This introduces a number of vendor-specific control requests for<br>configuration of the icE1usb from the host software.<br><br>Closes: OS#4675<br>Change-Id: I9d28566ba21a2a78def5e4a0ba07ecbc4a583aa9<br>---<br>M firmware/ice40-riscv/icE1usb/e1.c<br>M firmware/ice40-riscv/icE1usb/e1.h<br>M firmware/ice40-riscv/icE1usb/fw_app.c<br>A firmware/ice40-riscv/icE1usb/ice1usb_proto.h<br>M firmware/ice40-riscv/icE1usb/usb_e1.c<br>5 files changed, 224 insertions(+), 18 deletions(-)<br><br></pre><pre style="font-family: monospace,monospace; white-space: pre-wrap;"><span>diff --git a/firmware/ice40-riscv/icE1usb/e1.c b/firmware/ice40-riscv/icE1usb/e1.c</span><br><span>index 1d8fd30..16c8c80 100644</span><br><span>--- a/firmware/ice40-riscv/icE1usb/e1.c</span><br><span>+++ b/firmware/ice40-riscv/icE1usb/e1.c</span><br><span>@@ -238,7 +238,7 @@</span><br><span> </span><br><span> </span><br><span> void</span><br><span style="color: hsl(0, 100%, 40%);">-e1_init(bool clk_mode)</span><br><span style="color: hsl(120, 100%, 40%);">+e1_init(uint16_t rx_cr, uint16_t tx_cr)</span><br><span> {</span><br><span> /* Global state init */</span><br><span> memset(&g_e1, 0x00, sizeof(g_e1));</span><br><span>@@ -248,14 +248,11 @@</span><br><span> e1f_reset(&g_e1.tx.fifo, 128, 128);</span><br><span> </span><br><span> /* Enable Rx */</span><br><span style="color: hsl(0, 100%, 40%);">- g_e1.rx.cr = E1_RX_CR_MODE_MFA |</span><br><span style="color: hsl(0, 100%, 40%);">- E1_RX_CR_ENABLE;</span><br><span style="color: hsl(120, 100%, 40%);">+ g_e1.rx.cr = E1_RX_CR_ENABLE | rx_cr;</span><br><span> e1_regs->rx.csr = E1_RX_CR_OVFL_CLR | g_e1.rx.cr;</span><br><span> </span><br><span> /* Enable Tx */</span><br><span style="color: hsl(0, 100%, 40%);">- g_e1.tx.cr = (clk_mode ? E1_TX_CR_TICK_REMOTE : E1_TX_CR_TICK_LOCAL) |</span><br><span style="color: hsl(0, 100%, 40%);">- E1_TX_CR_MODE_TS0_CRC_E |</span><br><span style="color: hsl(0, 100%, 40%);">- E1_TX_CR_ENABLE;</span><br><span style="color: hsl(120, 100%, 40%);">+ g_e1.tx.cr = E1_TX_CR_ENABLE | tx_cr;</span><br><span> e1_regs->tx.csr = E1_TX_CR_UNFL_CLR | g_e1.tx.cr;</span><br><span> </span><br><span> /* State */</span><br><span>diff --git a/firmware/ice40-riscv/icE1usb/e1.h b/firmware/ice40-riscv/icE1usb/e1.h</span><br><span>index 05ce19a..fcd4284 100644</span><br><span>--- a/firmware/ice40-riscv/icE1usb/e1.h</span><br><span>+++ b/firmware/ice40-riscv/icE1usb/e1.h</span><br><span>@@ -7,7 +7,7 @@</span><br><span> </span><br><span> #pragma once</span><br><span> </span><br><span style="color: hsl(0, 100%, 40%);">-void e1_init(bool clk_mode);</span><br><span style="color: hsl(120, 100%, 40%);">+void e1_init(uint16_t rx_cr, uint16_t tx_cr);</span><br><span> void e1_poll(void);</span><br><span> void e1_debug_print(bool data);</span><br><span> </span><br><span>diff --git a/firmware/ice40-riscv/icE1usb/fw_app.c b/firmware/ice40-riscv/icE1usb/fw_app.c</span><br><span>index 62f4b0e..eebc21f 100644</span><br><span>--- a/firmware/ice40-riscv/icE1usb/fw_app.c</span><br><span>+++ b/firmware/ice40-riscv/icE1usb/fw_app.c</span><br><span>@@ -102,7 +102,7 @@</span><br><span> usb_e1_init();</span><br><span> </span><br><span> /* Start */</span><br><span style="color: hsl(0, 100%, 40%);">- e1_init(false); // local tick</span><br><span style="color: hsl(120, 100%, 40%);">+ e1_init(0, 0);</span><br><span> e1_active = true;</span><br><span> led_state(true);</span><br><span> usb_connect();</span><br><span>@@ -138,16 +138,6 @@</span><br><span> case 'O':</span><br><span> e1_debug_print(true);</span><br><span> break;</span><br><span style="color: hsl(0, 100%, 40%);">- case 'e':</span><br><span style="color: hsl(0, 100%, 40%);">- e1_init(true);</span><br><span style="color: hsl(0, 100%, 40%);">- e1_active = true;</span><br><span style="color: hsl(0, 100%, 40%);">- led_state(true);</span><br><span style="color: hsl(0, 100%, 40%);">- break;</span><br><span style="color: hsl(0, 100%, 40%);">- case 'E':</span><br><span style="color: hsl(0, 100%, 40%);">- e1_init(false);</span><br><span style="color: hsl(0, 100%, 40%);">- e1_active = true;</span><br><span style="color: hsl(0, 100%, 40%);">- led_state(true);</span><br><span style="color: hsl(0, 100%, 40%);">- break;</span><br><span> case 'c':</span><br><span> usb_connect();</span><br><span> break;</span><br><span>diff --git a/firmware/ice40-riscv/icE1usb/ice1usb_proto.h b/firmware/ice40-riscv/icE1usb/ice1usb_proto.h</span><br><span>new file mode 100644</span><br><span>index 0000000..61e12ad</span><br><span>--- /dev/null</span><br><span>+++ b/firmware/ice40-riscv/icE1usb/ice1usb_proto.h</span><br><span>@@ -0,0 +1,77 @@</span><br><span style="color: hsl(120, 100%, 40%);">+/*</span><br><span style="color: hsl(120, 100%, 40%);">+ * ice1usb_proto.h</span><br><span style="color: hsl(120, 100%, 40%);">+ *</span><br><span style="color: hsl(120, 100%, 40%);">+ * Copyright (C) 2020 Harald Welte <laforge@osmocom.org></span><br><span style="color: hsl(120, 100%, 40%);">+ * SPDX-License-Identifier: MIT</span><br><span style="color: hsl(120, 100%, 40%);">+ *</span><br><span style="color: hsl(120, 100%, 40%);">+ * Header file describing the USB protocol between the icE1usb firmware and the host</span><br><span style="color: hsl(120, 100%, 40%);">+ * software (currently really only osmo-e1d)</span><br><span style="color: hsl(120, 100%, 40%);">+ */</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+#pragma once</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+/***********************************************************************</span><br><span style="color: hsl(120, 100%, 40%);">+ * Control Endpoint / Device Requests</span><br><span style="color: hsl(120, 100%, 40%);">+ ***********************************************************************/</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+/*! returns a bit-mask of optional device capabilities (see enum e1usb_dev_capability) */</span><br><span style="color: hsl(120, 100%, 40%);">+#define ICE1USB_DEV_GET_CAPABILITIES 0x01</span><br><span style="color: hsl(120, 100%, 40%);">+#define ICE1USB_DEV_GET_FW_BUILD 0x02</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+enum e1usb_dev_capability {</span><br><span style="color: hsl(120, 100%, 40%);">+ /*! Does this board have a GPS-DO */</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_DEV_CAP_GPSDO,</span><br><span style="color: hsl(120, 100%, 40%);">+};</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+/* Interface Requests */</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+/*! returns a bit-mask of optional device capabilities (see enum e1usb_intf_capability) */</span><br><span style="color: hsl(120, 100%, 40%);">+#define ICE1USB_INTF_GET_CAPABILITIES 0x01</span><br><span style="color: hsl(120, 100%, 40%);">+#define ICE1USB_INTF_SET_TX_CFG 0x02 /*!< struct ice1usb_tx_config */</span><br><span style="color: hsl(120, 100%, 40%);">+#define ICE1USB_INTF_GET_TX_CFG 0x03 /*!< struct ice1usb_tx_config */</span><br><span style="color: hsl(120, 100%, 40%);">+#define ICE1USB_INTF_SET_RX_CFG 0x04 /*!< struct ice1usb_rx_config */</span><br><span style="color: hsl(120, 100%, 40%);">+#define ICE1USB_INTF_GET_RX_CFG 0x05 /*!< struct ice1usb_rx_config */</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+//enum e1usb_intf_capability { };</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+enum ice1usb_tx_mode {</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_TX_MODE_TRANSP = 0,</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_TX_MODE_TS0 = 1,</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_TX_MODE_TS0_CRC4 = 2,</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_TX_MODE_TS0_CRC4_E = 3,</span><br><span style="color: hsl(120, 100%, 40%);">+};</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+enum ice1usb_tx_timing {</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_TX_TIME_SRC_LOCAL = 0,</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_TX_TIME_SRC_REMOTE = 1,</span><br><span style="color: hsl(120, 100%, 40%);">+};</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+enum ice1usb_tx_ext_loopback {</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_TX_EXT_LOOPBACK_OFF = 0,</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_TX_EXT_LOOPBACK_SAME = 1,</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_TX_EXT_LOOPBACK_CROSS = 2,</span><br><span style="color: hsl(120, 100%, 40%);">+};</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+/* ICE1USB_INTF_{GET,SET}_TX_CFG */</span><br><span style="color: hsl(120, 100%, 40%);">+struct ice1usb_tx_config {</span><br><span style="color: hsl(120, 100%, 40%);">+ uint8_t mode; /*!< enum ice1usb_tx_mode */</span><br><span style="color: hsl(120, 100%, 40%);">+ uint8_t timing; /*!< enum ice1usb_tx_timing */</span><br><span style="color: hsl(120, 100%, 40%);">+ uint8_t ext_loopback; /*!< enum ice1usb_tx_ext_loopback */</span><br><span style="color: hsl(120, 100%, 40%);">+ uint8_t alarm; /*!< 1 = transmit alarm; 0 = don't */</span><br><span style="color: hsl(120, 100%, 40%);">+} __attribute__((packed));</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+enum ice1usb_rx_mode {</span><br><span style="color: hsl(120, 100%, 40%);">+ /*! transparent, unaligned bitstream */</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_RX_MODE_TRANSP = 0,</span><br><span style="color: hsl(120, 100%, 40%);">+ /*! alignment to E1 frame */</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_RX_MODE_FRAME = 2,</span><br><span style="color: hsl(120, 100%, 40%);">+ /*! alignment to E1 multiframe */</span><br><span style="color: hsl(120, 100%, 40%);">+ ICE1USB_RX_MODE_MULTIFRAME = 3,</span><br><span style="color: hsl(120, 100%, 40%);">+};</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+/* ICE1USB_INTF_{GET,SET}_RX_CFG */</span><br><span style="color: hsl(120, 100%, 40%);">+struct ice1usb_rx_config {</span><br><span style="color: hsl(120, 100%, 40%);">+ uint8_t mode; /*!< enum ice1usb_rx_mode */</span><br><span style="color: hsl(120, 100%, 40%);">+} __attribute__((packed));</span><br><span>diff --git a/firmware/ice40-riscv/icE1usb/usb_e1.c b/firmware/ice40-riscv/icE1usb/usb_e1.c</span><br><span>index e37edc3..0698de5 100644</span><br><span>--- a/firmware/ice40-riscv/icE1usb/usb_e1.c</span><br><span>+++ b/firmware/ice40-riscv/icE1usb/usb_e1.c</span><br><span>@@ -15,13 +15,30 @@</span><br><span> #include "console.h"</span><br><span> #include "misc.h"</span><br><span> #include "e1.h"</span><br><span style="color: hsl(120, 100%, 40%);">+#include "e1_hw.h"</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+#include "ice1usb_proto.h"</span><br><span> </span><br><span> struct {</span><br><span> bool running; /* are we running (transceiving USB data)? */</span><br><span> int out_bdi; /* buffer descriptor index for OUT EP */</span><br><span> int in_bdi; /* buffer descriptor index for IN EP */</span><br><span style="color: hsl(120, 100%, 40%);">+ struct ice1usb_tx_config tx_cfg;</span><br><span style="color: hsl(120, 100%, 40%);">+ struct ice1usb_rx_config rx_cfg;</span><br><span> } g_usb_e1;</span><br><span> </span><br><span style="color: hsl(120, 100%, 40%);">+/* default configuration at power-up */</span><br><span style="color: hsl(120, 100%, 40%);">+static const struct ice1usb_tx_config tx_cfg_default = {</span><br><span style="color: hsl(120, 100%, 40%);">+ .mode = ICE1USB_TX_MODE_TS0_CRC4_E,</span><br><span style="color: hsl(120, 100%, 40%);">+ .timing = ICE1USB_TX_TIME_SRC_LOCAL,</span><br><span style="color: hsl(120, 100%, 40%);">+ .ext_loopback = ICE1USB_TX_EXT_LOOPBACK_OFF,</span><br><span style="color: hsl(120, 100%, 40%);">+ .alarm = 0,</span><br><span style="color: hsl(120, 100%, 40%);">+};</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+static const struct ice1usb_rx_config rx_cfg_default = {</span><br><span style="color: hsl(120, 100%, 40%);">+ .mode = ICE1USB_RX_MODE_MULTIFRAME,</span><br><span style="color: hsl(120, 100%, 40%);">+};</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span> </span><br><span> /* Hack */</span><br><span> unsigned int e1_rx_need_data(unsigned int usb_addr, unsigned int max_len, unsigned int *pos);</span><br><span>@@ -200,6 +217,21 @@</span><br><span> return USB_FND_SUCCESS;</span><br><span> }</span><br><span> </span><br><span style="color: hsl(120, 100%, 40%);">+static void _perform_tx_config(void)</span><br><span style="color: hsl(120, 100%, 40%);">+{</span><br><span style="color: hsl(120, 100%, 40%);">+ const struct ice1usb_tx_config *cfg = &g_usb_e1.tx_cfg;</span><br><span style="color: hsl(120, 100%, 40%);">+ e1_tx_config( ((cfg->mode & 3) << 1) |</span><br><span style="color: hsl(120, 100%, 40%);">+ ((cfg->timing & 1) << 3) |</span><br><span style="color: hsl(120, 100%, 40%);">+ ((cfg->alarm & 1) << 4) |</span><br><span style="color: hsl(120, 100%, 40%);">+ ((cfg->ext_loopback & 3) << 5) );</span><br><span style="color: hsl(120, 100%, 40%);">+}</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+static void _perform_rx_config(void)</span><br><span style="color: hsl(120, 100%, 40%);">+{</span><br><span style="color: hsl(120, 100%, 40%);">+ const struct ice1usb_rx_config *cfg = &g_usb_e1.rx_cfg;</span><br><span style="color: hsl(120, 100%, 40%);">+ e1_rx_config((cfg->mode << 1));</span><br><span style="color: hsl(120, 100%, 40%);">+}</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span> static enum usb_fnd_resp</span><br><span> _e1_set_intf(const struct usb_intf_desc *base, const struct usb_intf_desc *sel)</span><br><span> {</span><br><span>@@ -213,6 +245,9 @@</span><br><span> if (g_usb_e1.running)</span><br><span> return USB_FND_SUCCESS;</span><br><span> </span><br><span style="color: hsl(120, 100%, 40%);">+ _perform_rx_config();</span><br><span style="color: hsl(120, 100%, 40%);">+ _perform_tx_config();</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span> g_usb_e1.running = true;</span><br><span> </span><br><span> /* Configure EP1 OUT / EP2 IN */</span><br><span>@@ -253,15 +288,122 @@</span><br><span> return USB_FND_SUCCESS;</span><br><span> }</span><br><span> </span><br><span style="color: hsl(120, 100%, 40%);">+static bool</span><br><span style="color: hsl(120, 100%, 40%);">+_set_tx_mode_done(struct usb_xfer *xfer)</span><br><span style="color: hsl(120, 100%, 40%);">+{</span><br><span style="color: hsl(120, 100%, 40%);">+ const struct ice1usb_tx_config *cfg = (const struct ice1usb_tx_config *) xfer->data;</span><br><span style="color: hsl(120, 100%, 40%);">+ printf("set_tx_mode %02x%02x%02x%02x\r\n",</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->data[0], xfer->data[1], xfer->data[2], xfer->data[3]);</span><br><span style="color: hsl(120, 100%, 40%);">+ g_usb_e1.tx_cfg = *cfg;</span><br><span style="color: hsl(120, 100%, 40%);">+ _perform_tx_config();</span><br><span style="color: hsl(120, 100%, 40%);">+ return true;</span><br><span style="color: hsl(120, 100%, 40%);">+}</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+static bool</span><br><span style="color: hsl(120, 100%, 40%);">+_set_rx_mode_done(struct usb_xfer *xfer)</span><br><span style="color: hsl(120, 100%, 40%);">+{</span><br><span style="color: hsl(120, 100%, 40%);">+ const struct ice1usb_rx_config *cfg = (const struct ice1usb_rx_config *) xfer->data;</span><br><span style="color: hsl(120, 100%, 40%);">+ printf("set_rx_mode %02x\r\n", xfer->data[0]);</span><br><span style="color: hsl(120, 100%, 40%);">+ g_usb_e1.rx_cfg = *cfg;</span><br><span style="color: hsl(120, 100%, 40%);">+ _perform_rx_config();</span><br><span style="color: hsl(120, 100%, 40%);">+ return true;</span><br><span style="color: hsl(120, 100%, 40%);">+}</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+/* per-interface requests */</span><br><span style="color: hsl(120, 100%, 40%);">+static enum usb_fnd_resp</span><br><span style="color: hsl(120, 100%, 40%);">+_e1_ctrl_req_intf(struct usb_ctrl_req *req, struct usb_xfer *xfer)</span><br><span style="color: hsl(120, 100%, 40%);">+{</span><br><span style="color: hsl(120, 100%, 40%);">+ unsigned int i;</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+ switch (req->bRequest) {</span><br><span style="color: hsl(120, 100%, 40%);">+ case ICE1USB_INTF_GET_CAPABILITIES:</span><br><span style="color: hsl(120, 100%, 40%);">+ /* no optional capabilities yet */</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->len = 0;</span><br><span style="color: hsl(120, 100%, 40%);">+ break;</span><br><span style="color: hsl(120, 100%, 40%);">+ case ICE1USB_INTF_SET_TX_CFG:</span><br><span style="color: hsl(120, 100%, 40%);">+ if (req->wLength < sizeof(struct ice1usb_tx_config))</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_ERROR;</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->cb_done = _set_tx_mode_done;</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->cb_ctx = req;</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->len = sizeof(struct ice1usb_tx_config);</span><br><span style="color: hsl(120, 100%, 40%);">+ break;</span><br><span style="color: hsl(120, 100%, 40%);">+ case ICE1USB_INTF_GET_TX_CFG:</span><br><span style="color: hsl(120, 100%, 40%);">+ if (req->wLength < sizeof(struct ice1usb_tx_config))</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_ERROR;</span><br><span style="color: hsl(120, 100%, 40%);">+ memcpy(xfer->data, &g_usb_e1.tx_cfg, sizeof(struct ice1usb_tx_config));</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->len = sizeof(struct ice1usb_tx_config);</span><br><span style="color: hsl(120, 100%, 40%);">+ break;</span><br><span style="color: hsl(120, 100%, 40%);">+ case ICE1USB_INTF_SET_RX_CFG:</span><br><span style="color: hsl(120, 100%, 40%);">+ if (req->wLength < sizeof(struct ice1usb_rx_config))</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_ERROR;</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->cb_done = _set_rx_mode_done;</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->cb_ctx = req;</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->len = sizeof(struct ice1usb_rx_config);</span><br><span style="color: hsl(120, 100%, 40%);">+ break;</span><br><span style="color: hsl(120, 100%, 40%);">+ case ICE1USB_INTF_GET_RX_CFG:</span><br><span style="color: hsl(120, 100%, 40%);">+ if (req->wLength < sizeof(struct ice1usb_rx_config))</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_ERROR;</span><br><span style="color: hsl(120, 100%, 40%);">+ memcpy(xfer->data, &g_usb_e1.rx_cfg, sizeof(struct ice1usb_rx_config));</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->len = sizeof(struct ice1usb_rx_config);</span><br><span style="color: hsl(120, 100%, 40%);">+ break;</span><br><span style="color: hsl(120, 100%, 40%);">+ default:</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_ERROR;</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_SUCCESS;</span><br><span style="color: hsl(120, 100%, 40%);">+}</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+/* device-global requests */</span><br><span style="color: hsl(120, 100%, 40%);">+static enum usb_fnd_resp</span><br><span style="color: hsl(120, 100%, 40%);">+_e1_ctrl_req_dev(struct usb_ctrl_req *req, struct usb_xfer *xfer)</span><br><span style="color: hsl(120, 100%, 40%);">+{</span><br><span style="color: hsl(120, 100%, 40%);">+ switch (req->bRequest) {</span><br><span style="color: hsl(120, 100%, 40%);">+ case ICE1USB_DEV_GET_CAPABILITIES:</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->data[0] = (1 << ICE1USB_DEV_CAP_GPSDO);</span><br><span style="color: hsl(120, 100%, 40%);">+ xfer->len = 1;</span><br><span style="color: hsl(120, 100%, 40%);">+ break;</span><br><span style="color: hsl(120, 100%, 40%);">+ default:</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_ERROR;</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_SUCCESS;</span><br><span style="color: hsl(120, 100%, 40%);">+}</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+/* USB host issues a control request to us */</span><br><span style="color: hsl(120, 100%, 40%);">+static enum usb_fnd_resp</span><br><span style="color: hsl(120, 100%, 40%);">+_e1_ctrl_req(struct usb_ctrl_req *req, struct usb_xfer *xfer)</span><br><span style="color: hsl(120, 100%, 40%);">+{</span><br><span style="color: hsl(120, 100%, 40%);">+ if (USB_REQ_TYPE(req) != USB_REQ_TYPE_VENDOR)</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_CONTINUE;</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+ switch (USB_REQ_RCPT(req)) {</span><br><span style="color: hsl(120, 100%, 40%);">+ case USB_REQ_RCPT_DEV:</span><br><span style="color: hsl(120, 100%, 40%);">+ return _e1_ctrl_req_dev(req, xfer);</span><br><span style="color: hsl(120, 100%, 40%);">+ case USB_REQ_RCPT_INTF:</span><br><span style="color: hsl(120, 100%, 40%);">+ if (req->wIndex != 0)</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_ERROR;</span><br><span style="color: hsl(120, 100%, 40%);">+ return _e1_ctrl_req_intf(req, xfer);</span><br><span style="color: hsl(120, 100%, 40%);">+ case USB_REQ_RCPT_EP:</span><br><span style="color: hsl(120, 100%, 40%);">+ case USB_REQ_RCPT_OTHER:</span><br><span style="color: hsl(120, 100%, 40%);">+ default:</span><br><span style="color: hsl(120, 100%, 40%);">+ return USB_FND_ERROR;</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+}</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span> static struct usb_fn_drv _e1_drv = {</span><br><span> .set_conf = _e1_set_conf,</span><br><span> .set_intf = _e1_set_intf,</span><br><span> .get_intf = _e1_get_intf,</span><br><span style="color: hsl(120, 100%, 40%);">+ .ctrl_req = _e1_ctrl_req,</span><br><span> };</span><br><span> </span><br><span> void</span><br><span> usb_e1_init(void)</span><br><span> {</span><br><span> memset(&g_usb_e1, 0x00, sizeof(g_usb_e1));</span><br><span style="color: hsl(120, 100%, 40%);">+ g_usb_e1.tx_cfg = tx_cfg_default;</span><br><span style="color: hsl(120, 100%, 40%);">+ g_usb_e1.rx_cfg = rx_cfg_default;</span><br><span> usb_register_function_driver(&_e1_drv);</span><br><span> }</span><br><span></span><br></pre><p>To view, visit <a href="https://gerrit.osmocom.org/c/osmo-e1-hardware/+/21775">change 21775</a>. To unsubscribe, or for help writing mail filters, visit <a href="https://gerrit.osmocom.org/settings">settings</a>.</p><div itemscope itemtype="http://schema.org/EmailMessage"><div itemscope itemprop="action" itemtype="http://schema.org/ViewAction"><link itemprop="url" href="https://gerrit.osmocom.org/c/osmo-e1-hardware/+/21775"/><meta itemprop="name" content="View Change"/></div></div>
<div style="display:none"> Gerrit-Project: osmo-e1-hardware </div>
<div style="display:none"> Gerrit-Branch: master </div>
<div style="display:none"> Gerrit-Change-Id: I9d28566ba21a2a78def5e4a0ba07ecbc4a583aa9 </div>
<div style="display:none"> Gerrit-Change-Number: 21775 </div>
<div style="display:none"> Gerrit-PatchSet: 6 </div>
<div style="display:none"> Gerrit-Owner: laforge <laforge@osmocom.org> </div>
<div style="display:none"> Gerrit-Reviewer: Jenkins Builder </div>
<div style="display:none"> Gerrit-Reviewer: laforge <laforge@osmocom.org> </div>
<div style="display:none"> Gerrit-Reviewer: tnt <tnt@246tNt.com> </div>
<div style="display:none"> Gerrit-MessageType: merged </div>