<p>fixeria <strong>submitted</strong> this change.</p><p><a href="https://gerrit.osmocom.org/c/osmo-bts/+/21479">View Change</a></p><div style="white-space:pre-wrap">Approvals:
Jenkins Builder: Verified
pespin: Looks good to me, but someone else must approve
laforge: Looks good to me, approved
</div><pre style="font-family: monospace,monospace; white-space: pre-wrap;">power_control: remove a logging statement and early return<br><br>This change would allow to separate the common logic from<br>lchan_ms_pwr_ctrl() and re-use it for Downlink power control.<br><br>The logging statement was quite useful during early stages<br>of development and testing of hysteresis and filtering,<br>but now we can sacrifice it.<br><br>Change-Id: I3c07cb6e14acd5a988761bbc51a9c3b60fb22d87<br>Related: SYS#4918<br>---<br>M src/common/power_control.c<br>M tests/power/ms_power_loop_test.err<br>2 files changed, 11 insertions(+), 19 deletions(-)<br><br></pre><pre style="font-family: monospace,monospace; white-space: pre-wrap;"><span>diff --git a/src/common/power_control.c b/src/common/power_control.c</span><br><span>index 21f7ce5..e08966f 100644</span><br><span>--- a/src/common/power_control.c</span><br><span>+++ b/src/common/power_control.c</span><br><span>@@ -148,16 +148,8 @@</span><br><span> </span><br><span> </span><br><span> /* Tolerate small deviations from 'rx-target' */</span><br><span style="color: hsl(0, 100%, 40%);">- if (abs(diff) <= params->hysteresis) {</span><br><span style="color: hsl(0, 100%, 40%);">- LOGPLCHAN(lchan, DLOOP, LOGL_INFO,</span><br><span style="color: hsl(0, 100%, 40%);">- "Keeping MS power at control level %d (%d dBm) because diff %d dBm "</span><br><span style="color: hsl(0, 100%, 40%);">- "from 'rx-target' %d dBm is not significant (hysteresis %d dBm)\n",</span><br><span style="color: hsl(0, 100%, 40%);">- ms_power_lvl, ms_dbm, diff, params->target, params->hysteresis);</span><br><span style="color: hsl(0, 100%, 40%);">- /* Keep the current power level in sync (just to be sure) */</span><br><span style="color: hsl(0, 100%, 40%);">- state->current = ms_power_lvl;</span><br><span style="color: hsl(0, 100%, 40%);">- bts_model_adjst_ms_pwr(lchan);</span><br><span style="color: hsl(0, 100%, 40%);">- return 0;</span><br><span style="color: hsl(0, 100%, 40%);">- }</span><br><span style="color: hsl(120, 100%, 40%);">+ if (abs(diff) <= params->hysteresis)</span><br><span style="color: hsl(120, 100%, 40%);">+ diff = 0;</span><br><span> </span><br><span> /* don't ever change more than MS_{LOWER,RAISE}_MAX_DBM during one loop</span><br><span> iteration, i.e. reduce the speed at which the MS transmit power can</span><br><span>diff --git a/tests/power/ms_power_loop_test.err b/tests/power/ms_power_loop_test.err</span><br><span>index 988b3ba..f2e187b 100644</span><br><span>--- a/tests/power/ms_power_loop_test.err</span><br><span>+++ b/tests/power/ms_power_loop_test.err</span><br><span>@@ -4,7 +4,7 @@</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 11 (8 dBm) to 9, 12 dBm (rx-ms-pwr-lvl 11, max-ms-pwr-lvl 2, rx-current -90 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 9 (12 dBm) to 7, 16 dBm (rx-ms-pwr-lvl 9, max-ms-pwr-lvl 2, rx-current -90 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 7 (16 dBm) to 5, 20 dBm (rx-ms-pwr-lvl 7, max-ms-pwr-lvl 2, rx-current -90 dBm, rx-target -75 dBm)</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 5 (20 dBm) because diff 0 dBm from 'rx-target' -75 dBm is not significant (hysteresis 0 dBm)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 5, 20 dBm (rx-ms-pwr-lvl 5, max-ms-pwr-lvl 2, rx-current -75 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 5 (20 dBm) to 3, 24 dBm (rx-ms-pwr-lvl 5, max-ms-pwr-lvl 2, rx-current -90 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 3 (24 dBm) to 2, 26 dBm (rx-ms-pwr-lvl 3, max-ms-pwr-lvl 2, rx-current -90 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 2, 26 dBm (rx-ms-pwr-lvl 2, max-ms-pwr-lvl 2, rx-current -90 dBm, rx-target -75 dBm)</span><br><span>@@ -13,7 +13,7 @@</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 0 (30 dBm) to 30, 34 dBm (rx-ms-pwr-lvl 0, max-ms-pwr-lvl 29, rx-current -90 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 30 (34 dBm) to 29, 36 dBm (rx-ms-pwr-lvl 30, max-ms-pwr-lvl 29, rx-current -90 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 29, 36 dBm (rx-ms-pwr-lvl 29, max-ms-pwr-lvl 29, rx-current -90 dBm, rx-target -75 dBm)</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 29 (36 dBm) because diff 0 dBm from 'rx-target' -75 dBm is not significant (hysteresis 0 dBm)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 29, 36 dBm (rx-ms-pwr-lvl 29, max-ms-pwr-lvl 29, rx-current -75 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Lowering MS power from control level 29 (36 dBm) to 1, 28 dBm (rx-ms-pwr-lvl 29, max-ms-pwr-lvl 29, rx-current -45 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Lowering MS power from control level 1 (28 dBm) to 5, 20 dBm (rx-ms-pwr-lvl 1, max-ms-pwr-lvl 29, rx-current -45 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Lowering MS power from control level 5 (20 dBm) to 9, 12 dBm (rx-ms-pwr-lvl 5, max-ms-pwr-lvl 29, rx-current -45 dBm, rx-target -75 dBm)</span><br><span>@@ -21,17 +21,17 @@</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 10 (10 dBm) to 9, 12 dBm (rx-ms-pwr-lvl 10, max-ms-pwr-lvl 29, rx-current -77 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Lowering MS power from control level 9 (12 dBm) to 14, 2 dBm (rx-ms-pwr-lvl 9, max-ms-pwr-lvl 14, rx-current -73 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Lowering MS power from control level 14 (2 dBm) to 15, 0 dBm (rx-ms-pwr-lvl 14, max-ms-pwr-lvl 0, rx-current -40 dBm, rx-target -75 dBm)</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm) because diff 0 dBm from 'rx-target' -75 dBm is not significant (hysteresis 0 dBm)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15, 0 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -75 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 15 (0 dBm) to 13, 3 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -78 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 13 (4 dBm) to 11, 8 dBm (rx-ms-pwr-lvl 13, max-ms-pwr-lvl 2, rx-current -80 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 11 (8 dBm) to 9, 11 dBm (rx-ms-pwr-lvl 11, max-ms-pwr-lvl 2, rx-current -78 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15, 0 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -50 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15, 0 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -50 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 15 (0 dBm) to 13, 4 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -92 dBm, rx-target -75 dBm)</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm) because diff 0 dBm from 'rx-target' -75 dBm is not significant (hysteresis 5 dBm)</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm) because diff -3 dBm from 'rx-target' -75 dBm is not significant (hysteresis 5 dBm)</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm) because diff 3 dBm from 'rx-target' -75 dBm is not significant (hysteresis 5 dBm)</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm) because diff 0 dBm from 'rx-target' -75 dBm is not significant (hysteresis 5 dBm)</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm) because diff -5 dBm from 'rx-target' -75 dBm is not significant (hysteresis 5 dBm)</span><br><span style="color: hsl(0, 100%, 40%);">-(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm) because diff 5 dBm from 'rx-target' -75 dBm is not significant (hysteresis 5 dBm)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15, 0 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -75 dBm, rx-target -75 dBm)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15, 0 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -72 dBm, rx-target -75 dBm)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15, 0 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -78 dBm, rx-target -75 dBm)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15, 0 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -75 dBm, rx-target -75 dBm)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15, 0 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -70 dBm, rx-target -75 dBm)</span><br><span style="color: hsl(120, 100%, 40%);">+(bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15, 0 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -80 dBm, rx-target -75 dBm)</span><br><span> (bts=0,trx=0,ts=0,ss=0) Raising MS power from control level 15 (0 dBm) to 13, 4 dBm (rx-ms-pwr-lvl 15, max-ms-pwr-lvl 2, rx-current -85 dBm, rx-target -75 dBm)</span><br><span></span><br></pre><p>To view, visit <a href="https://gerrit.osmocom.org/c/osmo-bts/+/21479">change 21479</a>. To unsubscribe, or for help writing mail filters, visit <a href="https://gerrit.osmocom.org/settings">settings</a>.</p><div itemscope itemtype="http://schema.org/EmailMessage"><div itemscope itemprop="action" itemtype="http://schema.org/ViewAction"><link itemprop="url" href="https://gerrit.osmocom.org/c/osmo-bts/+/21479"/><meta itemprop="name" content="View Change"/></div></div>
<div style="display:none"> Gerrit-Project: osmo-bts </div>
<div style="display:none"> Gerrit-Branch: master </div>
<div style="display:none"> Gerrit-Change-Id: I3c07cb6e14acd5a988761bbc51a9c3b60fb22d87 </div>
<div style="display:none"> Gerrit-Change-Number: 21479 </div>
<div style="display:none"> Gerrit-PatchSet: 2 </div>
<div style="display:none"> Gerrit-Owner: fixeria <vyanitskiy@sysmocom.de> </div>
<div style="display:none"> Gerrit-Reviewer: Jenkins Builder </div>
<div style="display:none"> Gerrit-Reviewer: fixeria <vyanitskiy@sysmocom.de> </div>
<div style="display:none"> Gerrit-Reviewer: laforge <laforge@osmocom.org> </div>
<div style="display:none"> Gerrit-Reviewer: pespin <pespin@sysmocom.de> </div>
<div style="display:none"> Gerrit-MessageType: merged </div>