<p>fixeria <strong>submitted</strong> this change.</p><p><a href="https://gerrit.osmocom.org/c/docker-playground/+/19160">View Change</a></p><div style="white-space:pre-wrap">Approvals:
laforge: Looks good to me, approved
pespin: Looks good to me, but someone else must approve
fixeria: Verified
</div><pre style="font-family: monospace,monospace; white-space: pre-wrap;">ttcn3-bts-test: add configuration with frequency hopping parameters<br><br>The Physical channel configuration is the same as in the non-hopping<br>configuration file. Hopping parameters are listed below the table.<br><br>== Physical channel configuration (FDMA) ==<br><br> +-------+------------------+------------------+------------------+------------------+<br> | # / # | TRX#0 | TRX#1 | TRX#2 | TRX#3 |<br> +-------+------------------+------------------+------------------+------------------+<br> | ARFCN | 871 | 873 | 875 | 877 |<br> +-------+------------------+------------------+------------------+------------------+<br><br>== Physical channel configuration (TDMA) ==<br><br> +-------+------------------+------------------+------------------+------------------+<br> | # / # | TRX#0 | TRX#1 | TRX#2 | TRX#3 |<br> +-------+------------------+------------------+------------------+------------------+<br> | TS0 | CCCH+SDCCH4 | TCH/F (a) | TCH/F (a) | TCH/F (a) |<br> +-------+------------------+------------------+------------------+------------------+<br> | TS1 | TCH/F | SDCCH8+CBCH | SDCCH8+CBCH (b) | SDCCH8+CBCH (b) |<br> +-------+------------------+------------------+------------------+------------------+<br> | TS2 | TCH/F (c) | TCH/H (c) | TCH/F (d) | TCH/H (d) |<br> +-------+------------------+------------------+------------------+------------------+<br> | TS3 | TCH/F_PDCH (e) | TCH/F_PDCH (e) | TCH/F_PDCH (e) | TCH/F_PDCH (e) |<br> +-------+------------------+------------------+------------------+------------------+<br> | TS4 | TCH/F_TCH/H_PDCH | TCH/F_TCH/H_PDCH | TCH/F_TCH/H_PDCH | TCH/F_TCH/H_PDCH |<br> +-------+------------------+------------------+------------------+------------------+<br> | TS5 | TCH/H (f) | TCH/H (f) | TCH/H (f) | TCH/H (f) |<br> +-------+------------------+------------------+------------------+------------------+<br> | TS6 | SDCCH8 (g) | PDCH (h) | PDCH (h) | SDCCH8 (g) |<br> +-------+------------------+------------------+------------------+------------------+<br> | TS7 | PDCH (i) | PDCH (j) | PDCH (i) | PDCH (j) |<br> +-------+------------------+------------------+------------------+------------------+<br><br>== Hopping configuration ==<br><br> a) HSN=0, MAIO=0,1,2<br> b) HSN=1, MAIO=3,5<br> c) HSN=2, MAIO=0,1<br> d) HSN=2, MAIO=2,3<br> e) HSN=3, MAIO=3,2,1,0<br> f) HSN=5, MAIO=0,1,2,3<br> g) HSN=6, MAIO=1,0<br> h) HSN=6, MAIO=1,0<br> i) HSN=0, MAIO=1,3<br> j) HSN=0, MAIO=0,2<br><br>Change-Id: I7822c3581fccba3277a63577e740e7486307635d<br>Related: SYS#4868, OS#4546<br>---<br>A ttcn3-bts-test/fh/BTS_Tests.cfg<br>A ttcn3-bts-test/fh/osmo-bsc.cfg<br>2 files changed, 542 insertions(+), 0 deletions(-)<br><br></pre><pre style="font-family: monospace,monospace; white-space: pre-wrap;"><span>diff --git a/ttcn3-bts-test/fh/BTS_Tests.cfg b/ttcn3-bts-test/fh/BTS_Tests.cfg</span><br><span>new file mode 100644</span><br><span>index 0000000..e0c3dff</span><br><span>--- /dev/null</span><br><span>+++ b/ttcn3-bts-test/fh/BTS_Tests.cfg</span><br><span>@@ -0,0 +1,138 @@</span><br><span style="color: hsl(120, 100%, 40%);">+[ORDERED_INCLUDE]</span><br><span style="color: hsl(120, 100%, 40%);">+"/osmo-ttcn3-hacks/bts/BTS_Tests.cfg"</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+[LOGGING]</span><br><span style="color: hsl(120, 100%, 40%);">+*.JUnitLogger.filename_stem := "junit-xml-hopping"</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+/* The following hopping configuration corresponds to ttcn3-bts-test/osmo-bsc-fh.cfg.</span><br><span style="color: hsl(120, 100%, 40%);">+ * See https://gerrit.osmocom.org/c/docker-playground/+/19160/ for more details.</span><br><span style="color: hsl(120, 100%, 40%);">+ *</span><br><span style="color: hsl(120, 100%, 40%);">+ * == Physical channel configuration (FDMA) ==</span><br><span style="color: hsl(120, 100%, 40%);">+ *</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | # / # | TRX#0 | TRX#1 | TRX#2 | TRX#3 |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | ARFCN | 871 | 873 | 875 | 877 |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ *</span><br><span style="color: hsl(120, 100%, 40%);">+ * == Physical channel configuration (TDMA) ==</span><br><span style="color: hsl(120, 100%, 40%);">+ *</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | # / # | TRX#0 | TRX#1 | TRX#2 | TRX#3 |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | TS0 | CCCH+SDCCH4 | TCH/F (a) | TCH/F (a) | TCH/F (a) |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | TS1 | TCH/F | SDCCH8+CBCH | SDCCH8+CBCH (b) | SDCCH8+CBCH (b) |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | TS2 | TCH/F (c) | TCH/H (c) | TCH/F (d) | TCH/H (d) |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | TS3 | TCH/F_PDCH (e) | TCH/F_PDCH (e) | TCH/F_PDCH (e) | TCH/F_PDCH (e) |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | TS4 | TCH/F_TCH/H_PDCH | TCH/F_TCH/H_PDCH | TCH/F_TCH/H_PDCH | TCH/F_TCH/H_PDCH |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | TS5 | TCH/H (f) | TCH/H (f) | TCH/H (f) | TCH/H (f) |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | TS6 | SDCCH8 (g) | PDCH (h) | PDCH (h) | SDCCH8 (g) |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ * | TS7 | PDCH (i) | PDCH (j) | PDCH (i) | PDCH (j) |</span><br><span style="color: hsl(120, 100%, 40%);">+ * +-------+------------------+------------------+------------------+------------------+</span><br><span style="color: hsl(120, 100%, 40%);">+ */</span><br><span style="color: hsl(120, 100%, 40%);">+[MODULE_PARAMETERS]</span><br><span style="color: hsl(120, 100%, 40%);">+BTS_Tests.mp_freq_hop_enabled := true;</span><br><span style="color: hsl(120, 100%, 40%);">+BTS_Tests.mp_fh_config := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* TS0 */</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* Group a) TCH/F */</span><br><span style="color: hsl(120, 100%, 40%);">+ hsn := 0,</span><br><span style="color: hsl(120, 100%, 40%);">+ trx_maio := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 1, maio := 0 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 2, maio := 1 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 3, maio := 2 }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ },</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* TS1 */</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* Group b) SDCCH8+CBCH */</span><br><span style="color: hsl(120, 100%, 40%);">+ hsn := 1,</span><br><span style="color: hsl(120, 100%, 40%);">+ trx_maio := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 2, maio := 3 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 3, maio := 5 }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ },</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* TS2 */</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* Group c) TCH/F + TCH/H (mixed) */</span><br><span style="color: hsl(120, 100%, 40%);">+ hsn := 2,</span><br><span style="color: hsl(120, 100%, 40%);">+ trx_maio := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 0, maio := 0 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 1, maio := 1 }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ },</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* Group d) TCH/F + TCH/H (mixed) */</span><br><span style="color: hsl(120, 100%, 40%);">+ hsn := 2,</span><br><span style="color: hsl(120, 100%, 40%);">+ trx_maio := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 2, maio := 2 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 3, maio := 3 }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ },</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* TS3 */</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* Group e) TCH/F_PDCH */</span><br><span style="color: hsl(120, 100%, 40%);">+ hsn := 3,</span><br><span style="color: hsl(120, 100%, 40%);">+ trx_maio := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 0, maio := 3 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 1, maio := 2 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 2, maio := 1 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 3, maio := 0 }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ },</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* TS4 */</span><br><span style="color: hsl(120, 100%, 40%);">+ /* No groups, all TCH/F_TCH/H_PDCH */</span><br><span style="color: hsl(120, 100%, 40%);">+ },</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* TS5 */</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* Group f) TCH/H */</span><br><span style="color: hsl(120, 100%, 40%);">+ hsn := 5,</span><br><span style="color: hsl(120, 100%, 40%);">+ trx_maio := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 0, maio := 0 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 1, maio := 1 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 2, maio := 2 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 3, maio := 3 }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ },</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* TS6 */</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* Group g) SDCCH8 */</span><br><span style="color: hsl(120, 100%, 40%);">+ hsn := 6,</span><br><span style="color: hsl(120, 100%, 40%);">+ trx_maio := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 0, maio := 1 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 3, maio := 0 }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ },</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* Group h) PDCH */</span><br><span style="color: hsl(120, 100%, 40%);">+ hsn := 6,</span><br><span style="color: hsl(120, 100%, 40%);">+ trx_maio := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 1, maio := 1 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 2, maio := 0 }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ },</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* TS7 */</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* Group i) PDCH */</span><br><span style="color: hsl(120, 100%, 40%);">+ hsn := 0,</span><br><span style="color: hsl(120, 100%, 40%);">+ trx_maio := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 0, maio := 1 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 2, maio := 3 }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ },</span><br><span style="color: hsl(120, 100%, 40%);">+ { /* Group h) PDCH */</span><br><span style="color: hsl(120, 100%, 40%);">+ hsn := 0,</span><br><span style="color: hsl(120, 100%, 40%);">+ trx_maio := {</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 1, maio := 0 },</span><br><span style="color: hsl(120, 100%, 40%);">+ { trx_nr := 3, maio := 2 }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+ }</span><br><span style="color: hsl(120, 100%, 40%);">+};</span><br><span style="color: hsl(120, 100%, 40%);">+</span><br><span style="color: hsl(120, 100%, 40%);">+[EXECUTE]</span><br><span style="color: hsl(120, 100%, 40%);">+BTS_Tests.control</span><br><span>diff --git a/ttcn3-bts-test/fh/osmo-bsc.cfg b/ttcn3-bts-test/fh/osmo-bsc.cfg</span><br><span>new file mode 100644</span><br><span>index 0000000..e11cec4</span><br><span>--- /dev/null</span><br><span>+++ b/ttcn3-bts-test/fh/osmo-bsc.cfg</span><br><span>@@ -0,0 +1,404 @@</span><br><span style="color: hsl(120, 100%, 40%);">+!</span><br><span style="color: hsl(120, 100%, 40%);">+! OsmoBSC (1.1.2.236-5f22) configuration saved from vty</span><br><span style="color: hsl(120, 100%, 40%);">+!!</span><br><span style="color: hsl(120, 100%, 40%);">+password foo</span><br><span style="color: hsl(120, 100%, 40%);">+!</span><br><span style="color: hsl(120, 100%, 40%);">+log gsmtap 172.18.9.10</span><br><span style="color: hsl(120, 100%, 40%);">+ logging level set-all debug</span><br><span style="color: hsl(120, 100%, 40%);">+ logging filter all 1</span><br><span style="color: hsl(120, 100%, 40%);">+!</span><br><span style="color: hsl(120, 100%, 40%);">+log stderr</span><br><span style="color: hsl(120, 100%, 40%);">+ logging filter all 1</span><br><span style="color: hsl(120, 100%, 40%);">+ logging color 1</span><br><span style="color: hsl(120, 100%, 40%);">+ logging print category 1</span><br><span style="color: hsl(120, 100%, 40%);">+ logging timestamp 1</span><br><span style="color: hsl(120, 100%, 40%);">+ logging print extended-timestamp 1</span><br><span style="color: hsl(120, 100%, 40%);">+ logging print file 1</span><br><span style="color: hsl(120, 100%, 40%);">+ logging level set-all notice</span><br><span style="color: hsl(120, 100%, 40%);">+ logging level rll info</span><br><span style="color: hsl(120, 100%, 40%);">+ logging level rsl debug</span><br><span style="color: hsl(120, 100%, 40%);">+ logging level msc debug</span><br><span style="color: hsl(120, 100%, 40%);">+ logging level filter debug</span><br><span style="color: hsl(120, 100%, 40%);">+ logging level pcu debug</span><br><span style="color: hsl(120, 100%, 40%);">+ logging level lctrl info</span><br><span style="color: hsl(120, 100%, 40%);">+ logging level lsccp info</span><br><span style="color: hsl(120, 100%, 40%);">+!</span><br><span style="color: hsl(120, 100%, 40%);">+stats interval 5</span><br><span style="color: hsl(120, 100%, 40%);">+!</span><br><span style="color: hsl(120, 100%, 40%);">+line vty</span><br><span style="color: hsl(120, 100%, 40%);">+ no login</span><br><span style="color: hsl(120, 100%, 40%);">+ bind 0.0.0.0</span><br><span style="color: hsl(120, 100%, 40%);">+!</span><br><span style="color: hsl(120, 100%, 40%);">+e1_input</span><br><span style="color: hsl(120, 100%, 40%);">+ e1_line 0 driver ipa</span><br><span style="color: hsl(120, 100%, 40%);">+ e1_line 0 port 0</span><br><span style="color: hsl(120, 100%, 40%);">+ no e1_line 0 keepalive</span><br><span style="color: hsl(120, 100%, 40%);">+ ipa bind 0.0.0.0</span><br><span style="color: hsl(120, 100%, 40%);">+cs7 instance 0</span><br><span style="color: hsl(120, 100%, 40%);">+ point-code 0.23.3</span><br><span style="color: hsl(120, 100%, 40%);">+ asp asp-clnt-msc-0 2905 0 m3ua</span><br><span style="color: hsl(120, 100%, 40%);">+ as as-clnt-msc-0 m3ua</span><br><span style="color: hsl(120, 100%, 40%);">+ asp asp-clnt-msc-0</span><br><span style="color: hsl(120, 100%, 40%);">+ routing-key 2 0.23.3</span><br><span style="color: hsl(120, 100%, 40%);">+network</span><br><span style="color: hsl(120, 100%, 40%);">+ network country code 1</span><br><span style="color: hsl(120, 100%, 40%);">+ mobile network code 1</span><br><span style="color: hsl(120, 100%, 40%);">+ encryption a5 0</span><br><span style="color: hsl(120, 100%, 40%);">+ neci 1</span><br><span style="color: hsl(120, 100%, 40%);">+ paging any use tch 0</span><br><span style="color: hsl(120, 100%, 40%);">+ handover 0</span><br><span style="color: hsl(120, 100%, 40%);">+ handover1 window rxlev averaging 10</span><br><span style="color: hsl(120, 100%, 40%);">+ handover1 window rxqual averaging 1</span><br><span style="color: hsl(120, 100%, 40%);">+ handover1 window rxlev neighbor averaging 10</span><br><span style="color: hsl(120, 100%, 40%);">+ handover1 power budget interval 6</span><br><span style="color: hsl(120, 100%, 40%);">+ handover1 power budget hysteresis 3</span><br><span style="color: hsl(120, 100%, 40%);">+ handover1 maximum distance 9999</span><br><span style="color: hsl(120, 100%, 40%);">+ timer t3212 30</span><br><span style="color: hsl(120, 100%, 40%);">+ bts 0</span><br><span style="color: hsl(120, 100%, 40%);">+ type sysmobts</span><br><span style="color: hsl(120, 100%, 40%);">+ band DCS1800</span><br><span style="color: hsl(120, 100%, 40%);">+ cell_identity 0</span><br><span style="color: hsl(120, 100%, 40%);">+ location_area_code 1</span><br><span style="color: hsl(120, 100%, 40%);">+ dtx uplink force</span><br><span style="color: hsl(120, 100%, 40%);">+ dtx downlink</span><br><span style="color: hsl(120, 100%, 40%);">+ base_station_id_code 63</span><br><span style="color: hsl(120, 100%, 40%);">+ ms max power 15</span><br><span style="color: hsl(120, 100%, 40%);">+ cell reselection hysteresis 4</span><br><span style="color: hsl(120, 100%, 40%);">+ rxlev access min 0</span><br><span style="color: hsl(120, 100%, 40%);">+ radio-link-timeout 32</span><br><span style="color: hsl(120, 100%, 40%);">+ channel allocator ascending</span><br><span style="color: hsl(120, 100%, 40%);">+ rach tx integer 9</span><br><span style="color: hsl(120, 100%, 40%);">+ rach max transmission 7</span><br><span style="color: hsl(120, 100%, 40%);">+ channel-descrption attach 1</span><br><span style="color: hsl(120, 100%, 40%);">+ channel-descrption bs-pa-mfrms 5</span><br><span style="color: hsl(120, 100%, 40%);">+ channel-descrption bs-ag-blks-res 1</span><br><span style="color: hsl(120, 100%, 40%);">+ early-classmark-sending forbidden</span><br><span style="color: hsl(120, 100%, 40%);">+ early-classmark-sending-3g allowed</span><br><span style="color: hsl(120, 100%, 40%);">+ ip.access unit_id 1234 0</span><br><span style="color: hsl(120, 100%, 40%);">+ ip.access rsl-ip 172.18.9.10</span><br><span style="color: hsl(120, 100%, 40%);">+ oml ip.access stream_id 255 line 0</span><br><span style="color: hsl(120, 100%, 40%);">+ neighbor-list mode manual-si5</span><br><span style="color: hsl(120, 100%, 40%);">+ neighbor-list add arfcn 100</span><br><span style="color: hsl(120, 100%, 40%);">+ neighbor-list add arfcn 200</span><br><span style="color: hsl(120, 100%, 40%);">+ si5 neighbor-list add arfcn 10</span><br><span style="color: hsl(120, 100%, 40%);">+ si5 neighbor-list add arfcn 20</span><br><span style="color: hsl(120, 100%, 40%);">+ codec-support fr</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs mode gprs</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs routing area 0</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs network-control-order nc0</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell bvci 1234</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer blocking-timer 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer blocking-retries 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer unblocking-retries 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer reset-timer 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer reset-retries 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer suspend-timer 10</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer suspend-retries 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer resume-timer 10</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer resume-retries 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer capability-update-timer 10</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs cell timer capability-update-retries 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs nsei 1234</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs ns timer tns-block 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs ns timer tns-block-retries 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs ns timer tns-reset 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs ns timer tns-reset-retries 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs ns timer tns-test 30</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs ns timer tns-alive 3</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs ns timer tns-alive-retries 10</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs nsvc 0 nsvci 1234</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs nsvc 0 local udp port 23000</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs nsvc 0 remote udp port 23000</span><br><span style="color: hsl(120, 100%, 40%);">+ gprs nsvc 0 remote ip 0.0.0.0</span><br><span style="color: hsl(120, 100%, 40%);">+ no force-combined-si</span><br><span style="color: hsl(120, 100%, 40%);">+ trx 0</span><br><span style="color: hsl(120, 100%, 40%);">+ rf_locked 0</span><br><span style="color: hsl(120, 100%, 40%);">+ arfcn 871</span><br><span style="color: hsl(120, 100%, 40%);">+ nominal power 50</span><br><span style="color: hsl(120, 100%, 40%);">+ max_power_red 20</span><br><span style="color: hsl(120, 100%, 40%);">+ rsl e1 tei 0</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 0</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config CCCH+SDCCH4</span><br><span style="color: hsl(120, 100%, 40%);">+ ! Shall not be hopping</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 0</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 1</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F</span><br><span style="color: hsl(120, 100%, 40%);">+ ! Intentionally non-hopping</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 0</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 2</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (c) HSN=2, MAIO=0,1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 3</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F_PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (e) HSN=3, MAIO=3,2,1,0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 4</span><br><span style="color: hsl(120, 100%, 40%);">+ ! Intentionally non-hopping</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F_TCH/H_PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 0</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 5</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/H</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (f) HSN=5, MAIO=0,1,2,3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 5</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 6</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config SDCCH8</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (g) HSN=6, MAIO=1,0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 6</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 7</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (i) HSN=0, MAIO=1,3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ trx 1</span><br><span style="color: hsl(120, 100%, 40%);">+ rf_locked 0</span><br><span style="color: hsl(120, 100%, 40%);">+ arfcn 873</span><br><span style="color: hsl(120, 100%, 40%);">+ nominal power 50</span><br><span style="color: hsl(120, 100%, 40%);">+ max_power_red 20</span><br><span style="color: hsl(120, 100%, 40%);">+ rsl e1 tei 1</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 0</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (a) HSN=0, MAIO=0,1,2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 1</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config SDCCH8+CBCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! Intentionally non-hopping</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 0</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 2</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/H</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (c) HSN=2, MAIO=0,1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 3</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F_PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (e) HSN=3, MAIO=3,2,1,0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 4</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F_TCH/H_PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! Intentionally non-hopping</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 0</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 5</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/H</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (f) HSN=5, MAIO=0,1,2,3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 5</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 6</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (h) HSN=6, MAIO=1,0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 6</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 7</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (j) HSN=0, MAIO=0,2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ trx 2</span><br><span style="color: hsl(120, 100%, 40%);">+ rf_locked 0</span><br><span style="color: hsl(120, 100%, 40%);">+ arfcn 875</span><br><span style="color: hsl(120, 100%, 40%);">+ nominal power 50</span><br><span style="color: hsl(120, 100%, 40%);">+ max_power_red 20</span><br><span style="color: hsl(120, 100%, 40%);">+ rsl e1 tei 2</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 0</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (a) HSN=0, MAIO=0,1,2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 1</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config SDCCH8+CBCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (b) HSN=1, MAIO=3,5</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 2</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (d) HSN=2, MAIO=2,3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 3</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F_PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (e) HSN=3, MAIO=3,2,1,0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 4</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F_TCH/H_PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! Intentionally non-hopping</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 0</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 5</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/H</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (f) HSN=5, MAIO=0,1,2,3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 5</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 6</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (h) HSN=6, MAIO=1,0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 6</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 7</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (i) HSN=0, MAIO=1,3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ trx 3</span><br><span style="color: hsl(120, 100%, 40%);">+ rf_locked 0</span><br><span style="color: hsl(120, 100%, 40%);">+ arfcn 877</span><br><span style="color: hsl(120, 100%, 40%);">+ nominal power 50</span><br><span style="color: hsl(120, 100%, 40%);">+ max_power_red 20</span><br><span style="color: hsl(120, 100%, 40%);">+ rsl e1 tei 3</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 0</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (a) HSN=0, MAIO=0,1,2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 1</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config SDCCH8+CBCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (b) HSN=1, MAIO=3,5</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 5</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 2</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/H</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (d) HSN=2, MAIO=2,3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 3</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F_PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (e) HSN=3, MAIO=3,2,1,0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 4</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/F_TCH/H_PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! Intentionally non-hopping</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 0</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 5</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config TCH/H</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (f) HSN=5, MAIO=0,1,2,3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 5</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 3</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 875</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 6</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config SDCCH8</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (g) HSN=6, MAIO=1,0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 6</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 871</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+ timeslot 7</span><br><span style="color: hsl(120, 100%, 40%);">+ phys_chan_config PDCH</span><br><span style="color: hsl(120, 100%, 40%);">+ ! (j) HSN=0, MAIO=0,2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping enabled 1</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping sequence-number 0</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping maio 2</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 873</span><br><span style="color: hsl(120, 100%, 40%);">+ hopping arfcn add 877</span><br><span style="color: hsl(120, 100%, 40%);">+msc 0</span><br><span style="color: hsl(120, 100%, 40%);">+ core-location-area-code 666</span><br><span style="color: hsl(120, 100%, 40%);">+ core-cell-identity 333</span><br><span style="color: hsl(120, 100%, 40%);">+ no bsc-welcome-text</span><br><span style="color: hsl(120, 100%, 40%);">+ no bsc-msc-lost-text</span><br><span style="color: hsl(120, 100%, 40%);">+ no bsc-grace-text</span><br><span style="color: hsl(120, 100%, 40%);">+ codec-list fr1 fr2 fr3</span><br><span style="color: hsl(120, 100%, 40%);">+ type normal</span><br><span style="color: hsl(120, 100%, 40%);">+ allow-emergency allow</span><br><span style="color: hsl(120, 100%, 40%);">+ amr-config 12_2k forbidden</span><br><span style="color: hsl(120, 100%, 40%);">+ amr-config 10_2k forbidden</span><br><span style="color: hsl(120, 100%, 40%);">+ amr-config 7_95k forbidden</span><br><span style="color: hsl(120, 100%, 40%);">+ amr-config 7_40k forbidden</span><br><span style="color: hsl(120, 100%, 40%);">+ amr-config 6_70k forbidden</span><br><span style="color: hsl(120, 100%, 40%);">+ amr-config 5_90k allowed</span><br><span style="color: hsl(120, 100%, 40%);">+ amr-config 5_15k forbidden</span><br><span style="color: hsl(120, 100%, 40%);">+ amr-config 4_75k forbidden</span><br><span style="color: hsl(120, 100%, 40%);">+bsc</span><br><span style="color: hsl(120, 100%, 40%);">+ mid-call-timeout 0</span><br><span style="color: hsl(120, 100%, 40%);">+ no missing-msc-text</span><br><span></span><br></pre><p>To view, visit <a href="https://gerrit.osmocom.org/c/docker-playground/+/19160">change 19160</a>. To unsubscribe, or for help writing mail filters, visit <a href="https://gerrit.osmocom.org/settings">settings</a>.</p><div itemscope itemtype="http://schema.org/EmailMessage"><div itemscope itemprop="action" itemtype="http://schema.org/ViewAction"><link itemprop="url" href="https://gerrit.osmocom.org/c/docker-playground/+/19160"/><meta itemprop="name" content="View Change"/></div></div>
<div style="display:none"> Gerrit-Project: docker-playground </div>
<div style="display:none"> Gerrit-Branch: master </div>
<div style="display:none"> Gerrit-Change-Id: I7822c3581fccba3277a63577e740e7486307635d </div>
<div style="display:none"> Gerrit-Change-Number: 19160 </div>
<div style="display:none"> Gerrit-PatchSet: 6 </div>
<div style="display:none"> Gerrit-Owner: fixeria <vyanitskiy@sysmocom.de> </div>
<div style="display:none"> Gerrit-Reviewer: fixeria <vyanitskiy@sysmocom.de> </div>
<div style="display:none"> Gerrit-Reviewer: laforge <laforge@osmocom.org> </div>
<div style="display:none"> Gerrit-Reviewer: pespin <pespin@sysmocom.de> </div>
<div style="display:none"> Gerrit-MessageType: merged </div>