<p>Harald Welte <strong>merged</strong> this change.</p><p><a href="https://gerrit.osmocom.org/11582">View Change</a></p><div style="white-space:pre-wrap">Approvals:
Harald Welte: Looks good to me, approved
Jenkins Builder: Verified
</div><pre style="font-family: monospace,monospace; white-space: pre-wrap;">OsmoBSC: update VTY reference<br><br>Re-generate bsc_vty_reference.xml from osmo-bsc, including updates to:<br>- handover and neighbor config<br>- SCCP timers<br>- logging<br><br>Change-Id: Ia9ba8d5eba531b1156de57573ab42517e0c1ca15<br>---<br>M OsmoBSC/vty/bsc_vty_reference.xml<br>1 file changed, 508 insertions(+), 450 deletions(-)<br><br></pre><pre style="font-family: monospace,monospace; white-space: pre-wrap;"><span>diff --git a/OsmoBSC/vty/bsc_vty_reference.xml b/OsmoBSC/vty/bsc_vty_reference.xml</span><br><span>index 29a61bc..f56b951 100644</span><br><span>--- a/OsmoBSC/vty/bsc_vty_reference.xml</span><br><span>+++ b/OsmoBSC/vty/bsc_vty_reference.xml</span><br><span>@@ -85,12 +85,6 @@</span><br><span> <param name='length' doc='Set number of lines on a screen' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='echo .MESSAGE'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='echo' doc='Echo a message back to the vty' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='.MESSAGE' doc='The message to echo' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span> <command id='who'></span><br><span> <params></span><br><span> <param name='who' doc='Display who is on vty' /></span><br><span>@@ -125,6 +119,12 @@</span><br><span> <param name='counters' doc='Generate table of all registered counters' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show rate-counters'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='rate-counters' doc='Show all rate counters' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='show network'></span><br><span> <params></span><br><span> <param name='show' doc='Show running system information' /></span><br><span>@@ -138,6 +138,12 @@</span><br><span> <param name='[<0-255>]' doc='BTS number' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show rejected-bts'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='rejected-bts' doc='Display recently rejected BTS devices' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='show trx [<0-255>] [<0-255>]'></span><br><span> <params></span><br><span> <param name='show' doc='Show running system information' /></span><br><span>@@ -182,22 +188,10 @@</span><br><span> <param name='conns' doc='Display currently active subscriber connections' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover any'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Manually trigger handover (for debugging)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='any' doc='Pick any actively used TCH/F or TCH/H lchan and handover to any other BTS. This is likely to fail if not all BTS are guaranteed to be reachable by the MS.' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='assignment any'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='assignment' doc='Manually trigger assignment (for debugging)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='any' doc='Pick any actively used TCH/F or TCH/H lchan and re-assign within the same BTS. This will fail if no lchans of the same type are available besides the used one.' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span> <command id='show paging [<0-255>]'></span><br><span> <params></span><br><span> <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='paging' doc='Display information about paging reuqests of a BTS' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='paging' doc='Display information about paging requests of a BTS' /></span><br><span> <param name='[<0-255>]' doc='BTS Number' /></span><br><span> </params></span><br><span> </command></span><br><span>@@ -282,7 +276,7 @@</span><br><span> <param name='1' doc='Prefix each log message with the log level name' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='logging print file (0|1|basename)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging print file (0|1|basename) [last]'></span><br><span> <params></span><br><span> <param name='logging' doc='Configure logging' /></span><br><span> <param name='print' doc='Log output settings' /></span><br><span>@@ -290,6 +284,7 @@</span><br><span> <param name='0' doc='Don't prefix each log message' /></span><br><span> <param name='1' doc='Prefix each log message with the source file and line' /></span><br><span> <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /></span><br><span> </params></span><br><span> </command></span><br><span> <command id='logging set-log-mask MASK'></span><br><span>@@ -299,30 +294,18 @@</span><br><span> <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='logging set log mask MASK'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='set' doc='Decide which categories to output.' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='log' doc='Log commands' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mask' doc='Mask commands' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='MASK' doc=''set log mask' is deprecated, please refer to the docs of 'set-log-mask' instead' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='logging level (all|rll|cc|mm|rr|rsl|nm|pag|meas|msc|mgcp|ho|hodec|ref|nat|ctrl|filter|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'></span><br><span> <params></span><br><span> <param name='logging' doc='Configure logging' /></span><br><span> <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='all' doc='Global setting for all subsystems' /></span><br><span> <param name='rll' doc='A-bis Radio Link Layer (RLL)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='cc' doc='Layer3 Call Control (CC)' /></span><br><span> <param name='mm' doc='Layer3 Mobility Management (MM)' /></span><br><span> <param name='rr' doc='Layer3 Radio Resource (RR)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='rsl' doc='A-bis Radio Signalling Link (RSL)' /></span><br><span> <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /></span><br><span> <param name='pag' doc='Paging Subsystem' /></span><br><span> <param name='meas' doc='Radio Measurement Processing' /></span><br><span> <param name='msc' doc='Mobile Switching Center' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mgcp' doc='Media Gateway Control Protocol' /></span><br><span> <param name='ho' doc='Hand-Over Process' /></span><br><span> <param name='hodec' doc='Hand-Over Decision' /></span><br><span> <param name='ref' doc='Reference Counting' /></span><br><span>@@ -330,6 +313,10 @@</span><br><span> <param name='ctrl' doc='Control interface' /></span><br><span> <param name='filter' doc='BSC/NAT IMSI based filtering' /></span><br><span> <param name='pcu' doc='PCU Interface' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='lcls' doc='Local Call, Local Switch' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='chan' doc='lchan FSM' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='ts' doc='timeslot FSM' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='as' doc='assignment FSM' /></span><br><span> <param name='lglobal' doc='Library-internal global log family' /></span><br><span> <param name='llapd' doc='LAPD in libosmogsm' /></span><br><span> <param name='linp' doc='A-bis Intput Subsystem' /></span><br><span>@@ -348,7 +335,6 @@</span><br><span> <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /></span><br><span> <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /></span><br><span> <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='everything' doc='Don't use. It doesn't log anything' /></span><br><span> <param name='debug' doc='Log debug messages and higher levels' /></span><br><span> <param name='info' doc='Log informational messages and higher levels' /></span><br><span> <param name='notice' doc='Log noticeable messages and higher levels' /></span><br><span>@@ -356,6 +342,38 @@</span><br><span> <param name='fatal' doc='Log only fatal messages' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging level set-all (debug|info|notice|error|fatal)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='debug' doc='Log debug messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='info' doc='Log informational messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='notice' doc='Log noticeable messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='error' doc='Log error messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='fatal' doc='Log only fatal messages' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging level force-all (debug|info|notice|error|fatal)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='debug' doc='Log debug messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='info' doc='Log informational messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='notice' doc='Log noticeable messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='error' doc='Log error messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='fatal' doc='Log only fatal messages' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='no logging level force-all'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='no' doc='Negate a command or set its defaults' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='show logging vty'></span><br><span> <params></span><br><span> <param name='show' doc='Show running system information' /></span><br><span>@@ -406,6 +424,26 @@</span><br><span> <param name='REGEXP' doc='Regular expression' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show timer [TNNNN]'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='timer' doc='GSM Timers' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='[TNNNN]' doc='Specific timer to show, or all timers if omitted.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show bts <0-255> neighbor arfcn <0-1023> bsic (<0-63>|any)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bts' doc='Display information about a BTS' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-255>' doc='BTS number' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Query which cell would be the target for this neighbor ARFCN+BSIC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='arfcn' doc='ARFCN of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-1023>' doc='ARFCN value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bsic' doc='BSIC of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-63>' doc='BSIC value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='show e1_driver'></span><br><span> <params></span><br><span> <param name='show' doc='Show running system information' /></span><br><span>@@ -537,6 +575,57 @@</span><br><span> <param name='sua' doc='Display all SUA ASs' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show cs7 instance <0-15> sccp addressbook'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp' doc='Signalling Connection Control Part' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='addressbook' doc='List all SCCP addressbook entries' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show cs7 instance <0-15> sccp users'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp' doc='Signalling Connection Control Part' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='users' doc='Show List of SCCP Users registered' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show cs7 instance <0-15> sccp ssn <0-65535>'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp' doc='Signalling Connection Control Part' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='ssn' doc='Find an SCCP User registered for the given SSN' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='Subsystem Number (SSN)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show cs7 instance <0-15> sccp connections'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp' doc='Signalling Connection Control Part' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='connections' doc='Show List of active SCCP connections' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show cs7 instance <0-15> sccp timers'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp' doc='Signaling Connection Control Part' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='timers' doc='Show List of SCCP timers' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> </node></span><br><span> <node id='enable'></span><br><span> <name>enable</name></span><br><span>@@ -590,12 +679,6 @@</span><br><span> <param name='length' doc='Set number of lines on a screen' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='echo .MESSAGE'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='echo' doc='Echo a message back to the vty' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='.MESSAGE' doc='The message to echo' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span> <command id='who'></span><br><span> <params></span><br><span> <param name='who' doc='Display who is on vty' /></span><br><span>@@ -643,6 +726,12 @@</span><br><span> <param name='counters' doc='Generate table of all registered counters' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show rate-counters'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='rate-counters' doc='Show all rate counters' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='show network'></span><br><span> <params></span><br><span> <param name='show' doc='Show running system information' /></span><br><span>@@ -656,6 +745,12 @@</span><br><span> <param name='[<0-255>]' doc='BTS number' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show rejected-bts'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='rejected-bts' doc='Display recently rejected BTS devices' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='show trx [<0-255>] [<0-255>]'></span><br><span> <params></span><br><span> <param name='show' doc='Show running system information' /></span><br><span>@@ -700,6 +795,21 @@</span><br><span> <param name='conns' doc='Display currently active subscriber connections' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show paging [<0-255>]'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='paging' doc='Display information about paging requests of a BTS' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='[<0-255>]' doc='BTS Number' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show paging-group <0-255> IMSI'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='paging-group' doc='Display the paging group' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-255>' doc='BTS Number' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='IMSI' doc='IMSI' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='handover any'></span><br><span> <params></span><br><span> <param name='handover' doc='Manually trigger handover (for debugging)' /></span><br><span>@@ -712,19 +822,16 @@</span><br><span> <param name='any' doc='Pick any actively used TCH/F or TCH/H lchan and re-assign within the same BTS. This will fail if no lchans of the same type are available besides the used one.' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='show paging [<0-255>]'></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='handover any to arfcn <0-1023> bsic (<0-63>|any)'></span><br><span> <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='paging' doc='Display information about paging reuqests of a BTS' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='[<0-255>]' doc='BTS Number' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='show paging-group <0-255> IMSI'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='paging-group' doc='Display the paging group' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-255>' doc='BTS Number' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='IMSI' doc='IMSI' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='handover' doc='Manually trigger handover (for debugging)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='any' doc='Pick any actively used TCH/F or TCH/H lchan to handover to another cell. This is likely to fail outside of a lab setup where you are certain that all MS are able to see the target cell.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='to' doc=''to'' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='arfcn' doc='ARFCN of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-1023>' doc='ARFCN value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bsic' doc='BSIC of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-63>' doc='BSIC value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /></span><br><span> </params></span><br><span> </command></span><br><span> <command id='logging enable'></span><br><span>@@ -800,7 +907,7 @@</span><br><span> <param name='1' doc='Prefix each log message with the log level name' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='logging print file (0|1|basename)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging print file (0|1|basename) [last]'></span><br><span> <params></span><br><span> <param name='logging' doc='Configure logging' /></span><br><span> <param name='print' doc='Log output settings' /></span><br><span>@@ -808,6 +915,7 @@</span><br><span> <param name='0' doc='Don't prefix each log message' /></span><br><span> <param name='1' doc='Prefix each log message with the source file and line' /></span><br><span> <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /></span><br><span> </params></span><br><span> </command></span><br><span> <command id='logging set-log-mask MASK'></span><br><span>@@ -817,30 +925,18 @@</span><br><span> <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='logging set log mask MASK'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='set' doc='Decide which categories to output.' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='log' doc='Log commands' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mask' doc='Mask commands' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='MASK' doc=''set log mask' is deprecated, please refer to the docs of 'set-log-mask' instead' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='logging level (all|rll|cc|mm|rr|rsl|nm|pag|meas|msc|mgcp|ho|hodec|ref|nat|ctrl|filter|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'></span><br><span> <params></span><br><span> <param name='logging' doc='Configure logging' /></span><br><span> <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='all' doc='Global setting for all subsystems' /></span><br><span> <param name='rll' doc='A-bis Radio Link Layer (RLL)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='cc' doc='Layer3 Call Control (CC)' /></span><br><span> <param name='mm' doc='Layer3 Mobility Management (MM)' /></span><br><span> <param name='rr' doc='Layer3 Radio Resource (RR)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='rsl' doc='A-bis Radio Signalling Link (RSL)' /></span><br><span> <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /></span><br><span> <param name='pag' doc='Paging Subsystem' /></span><br><span> <param name='meas' doc='Radio Measurement Processing' /></span><br><span> <param name='msc' doc='Mobile Switching Center' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mgcp' doc='Media Gateway Control Protocol' /></span><br><span> <param name='ho' doc='Hand-Over Process' /></span><br><span> <param name='hodec' doc='Hand-Over Decision' /></span><br><span> <param name='ref' doc='Reference Counting' /></span><br><span>@@ -848,6 +944,10 @@</span><br><span> <param name='ctrl' doc='Control interface' /></span><br><span> <param name='filter' doc='BSC/NAT IMSI based filtering' /></span><br><span> <param name='pcu' doc='PCU Interface' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='lcls' doc='Local Call, Local Switch' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='chan' doc='lchan FSM' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='ts' doc='timeslot FSM' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='as' doc='assignment FSM' /></span><br><span> <param name='lglobal' doc='Library-internal global log family' /></span><br><span> <param name='llapd' doc='LAPD in libosmogsm' /></span><br><span> <param name='linp' doc='A-bis Intput Subsystem' /></span><br><span>@@ -866,7 +966,6 @@</span><br><span> <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /></span><br><span> <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /></span><br><span> <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='everything' doc='Don't use. It doesn't log anything' /></span><br><span> <param name='debug' doc='Log debug messages and higher levels' /></span><br><span> <param name='info' doc='Log informational messages and higher levels' /></span><br><span> <param name='notice' doc='Log noticeable messages and higher levels' /></span><br><span>@@ -874,6 +973,38 @@</span><br><span> <param name='fatal' doc='Log only fatal messages' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging level set-all (debug|info|notice|error|fatal)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='debug' doc='Log debug messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='info' doc='Log informational messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='notice' doc='Log noticeable messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='error' doc='Log error messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='fatal' doc='Log only fatal messages' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging level force-all (debug|info|notice|error|fatal)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='debug' doc='Log debug messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='info' doc='Log informational messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='notice' doc='Log noticeable messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='error' doc='Log error messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='fatal' doc='Log only fatal messages' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='no logging level force-all'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='no' doc='Negate a command or set its defaults' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='show logging vty'></span><br><span> <params></span><br><span> <param name='show' doc='Show running system information' /></span><br><span>@@ -924,6 +1055,26 @@</span><br><span> <param name='REGEXP' doc='Regular expression' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show timer [TNNNN]'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='timer' doc='GSM Timers' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='[TNNNN]' doc='Specific timer to show, or all timers if omitted.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show bts <0-255> neighbor arfcn <0-1023> bsic (<0-63>|any)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bts' doc='Display information about a BTS' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-255>' doc='BTS number' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Query which cell would be the target for this neighbor ARFCN+BSIC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='arfcn' doc='ARFCN of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-1023>' doc='ARFCN value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bsic' doc='BSIC of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-63>' doc='BSIC value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='drop bts connection <0-65535> (oml|rsl)'></span><br><span> <params></span><br><span> <param name='drop' doc='Debug/Simulation command to drop Abis/IP BTS' /></span><br><span>@@ -1249,6 +1400,57 @@</span><br><span> <param name='sua' doc='Display all SUA ASs' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show cs7 instance <0-15> sccp addressbook'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp' doc='Signalling Connection Control Part' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='addressbook' doc='List all SCCP addressbook entries' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show cs7 instance <0-15> sccp users'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp' doc='Signalling Connection Control Part' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='users' doc='Show List of SCCP Users registered' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show cs7 instance <0-15> sccp ssn <0-65535>'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp' doc='Signalling Connection Control Part' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='ssn' doc='Find an SCCP User registered for the given SSN' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='Subsystem Number (SSN)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show cs7 instance <0-15> sccp connections'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp' doc='Signalling Connection Control Part' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='connections' doc='Show List of active SCCP connections' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='show cs7 instance <0-15> sccp timers'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp' doc='Signaling Connection Control Part' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='timers' doc='Show List of SCCP timers' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> </node></span><br><span> <node id='config'></span><br><span> <name>config</name></span><br><span>@@ -1577,7 +1779,7 @@</span><br><span> <param name='1' doc='Prefix each log message with the log level name' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='logging print file (0|1|basename)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging print file (0|1|basename) [last]'></span><br><span> <params></span><br><span> <param name='logging' doc='Configure logging' /></span><br><span> <param name='print' doc='Log output settings' /></span><br><span>@@ -1585,23 +1787,21 @@</span><br><span> <param name='0' doc='Don't prefix each log message' /></span><br><span> <param name='1' doc='Prefix each log message with the source file and line' /></span><br><span> <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='logging level (all|rll|cc|mm|rr|rsl|nm|pag|meas|msc|mgcp|ho|hodec|ref|nat|ctrl|filter|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'></span><br><span> <params></span><br><span> <param name='logging' doc='Configure logging' /></span><br><span> <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='all' doc='Global setting for all subsystems' /></span><br><span> <param name='rll' doc='A-bis Radio Link Layer (RLL)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='cc' doc='Layer3 Call Control (CC)' /></span><br><span> <param name='mm' doc='Layer3 Mobility Management (MM)' /></span><br><span> <param name='rr' doc='Layer3 Radio Resource (RR)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='rsl' doc='A-bis Radio Signalling Link (RSL)' /></span><br><span> <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /></span><br><span> <param name='pag' doc='Paging Subsystem' /></span><br><span> <param name='meas' doc='Radio Measurement Processing' /></span><br><span> <param name='msc' doc='Mobile Switching Center' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mgcp' doc='Media Gateway Control Protocol' /></span><br><span> <param name='ho' doc='Hand-Over Process' /></span><br><span> <param name='hodec' doc='Hand-Over Decision' /></span><br><span> <param name='ref' doc='Reference Counting' /></span><br><span>@@ -1609,6 +1809,10 @@</span><br><span> <param name='ctrl' doc='Control interface' /></span><br><span> <param name='filter' doc='BSC/NAT IMSI based filtering' /></span><br><span> <param name='pcu' doc='PCU Interface' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='lcls' doc='Local Call, Local Switch' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='chan' doc='lchan FSM' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='ts' doc='timeslot FSM' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='as' doc='assignment FSM' /></span><br><span> <param name='lglobal' doc='Library-internal global log family' /></span><br><span> <param name='llapd' doc='LAPD in libosmogsm' /></span><br><span> <param name='linp' doc='A-bis Intput Subsystem' /></span><br><span>@@ -1627,7 +1831,6 @@</span><br><span> <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /></span><br><span> <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /></span><br><span> <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='everything' doc='Don't use. It doesn't log anything' /></span><br><span> <param name='debug' doc='Log debug messages and higher levels' /></span><br><span> <param name='info' doc='Log informational messages and higher levels' /></span><br><span> <param name='notice' doc='Log noticeable messages and higher levels' /></span><br><span>@@ -1635,6 +1838,38 @@</span><br><span> <param name='fatal' doc='Log only fatal messages' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging level set-all (debug|info|notice|error|fatal)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='debug' doc='Log debug messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='info' doc='Log informational messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='notice' doc='Log noticeable messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='error' doc='Log error messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='fatal' doc='Log only fatal messages' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='logging level force-all (debug|info|notice|error|fatal)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='debug' doc='Log debug messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='info' doc='Log informational messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='notice' doc='Log noticeable messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='error' doc='Log error messages and higher levels' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='fatal' doc='Log only fatal messages' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='no logging level force-all'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='no' doc='Negate a command or set its defaults' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='logging' doc='Configure logging' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='level' doc='Set the log level for a specified category' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='logging filter imsi IMSI'></span><br><span> <params></span><br><span> <param name='logging' doc='Configure logging' /></span><br><span>@@ -1903,15 +2138,6 @@</span><br><span> <param name='NAME' doc='Name of AS' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='show cs7 instance <0-15> sccp-addressbook'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='show' doc='Show running system information' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='cs7' doc='ITU-T Signaling System 7' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='instance' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-15>' doc='An instance of the SS7 stack' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='sccp-addressbook' doc='List all SCCP addressbook entries' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span> <command id='sccp-address NAME'></span><br><span> <params></span><br><span> <param name='sccp-address' doc='Create/Modify an SCCP addressbook entry' /></span><br><span>@@ -1925,6 +2151,21 @@</span><br><span> <param name='NAME' doc='Name of the SCCP Address' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) <1-999999>'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sccp-timer' doc='Configure SCCP timer values, see ITU-T Q.714' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='conn_est' doc='Waiting for connection confirm message, 1 to 2 minutes (default: 60)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='ias' doc='Send keep-alive: on an idle connection, delay before sending an Idle Timer message, 5 to 10 minutes (default: 420)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='iar' doc='Receive keep-alive: on an idle connection, delay until considering a connection as stale, 11 to 21 minutes (default: 900)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='rel' doc='Waiting for release complete message, 10 to 20 seconds (default: 10)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='repeat_rel' doc='Waiting for release complete message; or to repeat sending released message after the initial expiry, 10 to 20 seconds (default: 10)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='int' doc='Waiting for release complete message; or to release connection resources, freeze the LRN and alert a maintenance function after the initial expiry, extending to 1 minute (default: 60)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='guard' doc='Waiting to resume normal procedure for temporary connection sections during the restart procedure, 23 to 25 minutes (default: 1380)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='reset' doc='Waiting to release temporary connection section or alert maintenance function after reset request message is sent, 10 to 20 seconds (default: 10)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='reassembly' doc='Waiting to receive all the segments of the remaining segments, single segmented message after receiving the first segment, 10 to 20 seconds (default: 10)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<1-999999>' doc='Timer value, in seconds' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> </node></span><br><span> <node id='config-cs7-as'></span><br><span> <name>config-cs7-as</name></span><br><span>@@ -2214,11 +2455,27 @@</span><br><span> <param name='update' doc='Periodic Location Updating Interval' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='dyn_ts_allow_tch_f (0|1)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='meas-feed destination ADDR <0-65535>'></span><br><span> <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='dyn_ts_allow_tch_f' doc='Allow or disallow allocating TCH/F on TCH_F_TCH_H_PDCH timeslots' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='0' doc='Disallow TCH/F on TCH_F_TCH_H_PDCH (default)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='1' doc='Allow TCH/F on TCH_F_TCH_H_PDCH' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='meas-feed' doc='Measurement Report export' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='destination' doc='Where to forward Measurement Report feeds' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='ADDR' doc='address or hostname' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='port number' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='meas-feed scenario NAME'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='meas-feed' doc='Measurement Report export' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='scenario' doc='Set a name to include in the Measurement Report feeds' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='NAME' doc='Name string, up to 31 characters' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='timer TNNNN (default|<1-65535>)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='TNNNN' doc='T-number, optionally preceded by 't' or 'T'.See also 'show timer' for a list of available timers.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='default' doc='Set to default timer value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<1-65535>' doc='Timer value' /></span><br><span> </params></span><br><span> </command></span><br><span> <command id='neci (0|1)'></span><br><span>@@ -2228,109 +2485,6 @@</span><br><span> <param name='1' doc='Set the NECI bit' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3101 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3101' doc='Set the timeout value for IMMEDIATE ASSIGNMENT (default: 3 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (3 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3103 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3103' doc='Set the timeout value for HANDOVER (default: 5 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (5 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3105 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3105' doc='Set the timer for repetition of PHYSICAL INFORMATION (default: 100 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (100 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3107 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3107' doc='Currently not used (default: 5 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (5 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3109 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3109' doc='Set the RSL SACCH deactivation timeout (default: 5 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (5 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3111 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3111' doc='Set the RSL timeout to wait before releasing the RF Channel (default: 2 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (2 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3113 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3113' doc='Set the time to try paging a subscriber (default: 10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3115 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3115' doc='Currently not used (default: 10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3117 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3117' doc='Currently not used (default: 10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3119 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3119' doc='Currently not used (default: 10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3122 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3122' doc='Default waiting time (seconds) after IMM ASS REJECT (default: 10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timer t3141 (default|<1-65535>)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timer' doc='Configure GSM Timers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='t3141' doc='Currently not used (default: 10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Set to default timer value (10 seconds)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65535>' doc='Timer Value in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='dtx-used (0|1)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='dtx-used' doc='.HIDDEN' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='0' doc='Obsolete' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='1' doc='Obsolete' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span> <command id='paging any use tch (0|1)'></span><br><span> <params></span><br><span> <param name='paging' doc='Assign a TCH when receiving a Paging Any request' /></span><br><span>@@ -2410,8 +2564,8 @@</span><br><span> <param name='handover1' doc='Handover options for handover decision algorithm 1' /></span><br><span> <param name='power' doc='Neighbor cell power triggering' /></span><br><span> <param name='budget' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='hysteresis' doc='How many dBm stronger must a neighbor be to become a HO candidate' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-999>' doc='Neighbor's strength difference in dBm' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='hysteresis' doc='How many dB stronger must a neighbor be to become a HO candidate' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-999>' doc='Neighbor's strength difference in dB' /></span><br><span> <param name='default' doc='Use default (3), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span>@@ -2470,8 +2624,8 @@</span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span> <param name='power' doc='Neighbor cell power triggering' /></span><br><span> <param name='budget' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='hysteresis' doc='How many dBm stronger must a neighbor be to become a HO candidate' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-999>' doc='Neighbor's strength difference in dBm' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='hysteresis' doc='How many dB stronger must a neighbor be to become a HO candidate' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-999>' doc='Neighbor's strength difference in dB' /></span><br><span> <param name='default' doc='Use default (3), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span>@@ -2487,7 +2641,7 @@</span><br><span> <command id='handover2 assignment (0|1|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='assignment' doc='Enable or disable in-call channel re-assignment (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='assignment' doc='Enable or disable in-call channel re-assignment' /></span><br><span> <param name='0' doc='Disable in-call assignment' /></span><br><span> <param name='1' doc='Enable in-call assignment' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span>@@ -2496,7 +2650,7 @@</span><br><span> <command id='handover2 tdma-measurement (full|subset|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='tdma-measurement' doc='Define measurement set of TDMA frames (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='tdma-measurement' doc='Define measurement set of TDMA frames' /></span><br><span> <param name='full' doc='Full set of 102/104 TDMA frames' /></span><br><span> <param name='subset' doc='Sub set of 4 TDMA frames (SACCH)' /></span><br><span> <param name='default' doc='Use default (subset), remove explicit setting on this node' /></span><br><span>@@ -2505,7 +2659,7 @@</span><br><span> <command id='handover2 min rxlev (<-110--50>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='min' doc='Minimum Level/Quality thresholds before triggering HO (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='min' doc='Minimum Level/Quality thresholds before triggering HO' /></span><br><span> <param name='rxlev' doc='How weak may RxLev of an MS become before triggering HO' /></span><br><span> <param name='<-110--50>' doc='minimum RxLev (dBm)' /></span><br><span> <param name='default' doc='Use default (-100), remove explicit setting on this node' /></span><br><span>@@ -2514,34 +2668,34 @@</span><br><span> <command id='handover2 min rxqual (<0-7>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='min' doc='Minimum Level/Quality thresholds before triggering HO (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='min' doc='Minimum Level/Quality thresholds before triggering HO' /></span><br><span> <param name='rxqual' doc='How bad may RxQual of an MS become before triggering HO' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-7>' doc='minimum RxQual (dBm)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-7>' doc='minimum RxQual' /></span><br><span> <param name='default' doc='Use default (5), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span> <command id='handover2 afs-bias rxlev (<0-20>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs' /></span><br><span> <param name='rxlev' doc='RxLev improvement bias for AFS over other codecs' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-20>' doc='Virtual RxLev improvement (dBm)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-20>' doc='Virtual RxLev improvement (dB)' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span> <command id='handover2 afs-bias rxqual (<0-7>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs' /></span><br><span> <param name='rxqual' doc='RxQual improvement bias for AFS over other codecs' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-7>' doc='Virtual RxQual improvement (dBm)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-7>' doc='Virtual RxQual improvement' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span> <command id='handover2 min-free-slots tch/f (<0-9999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested' /></span><br><span> <param name='tch/f' doc='Minimum free TCH/F timeslots before cell is considered congested' /></span><br><span> <param name='<0-9999>' doc='Number of TCH/F slots' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span>@@ -2550,7 +2704,7 @@</span><br><span> <command id='handover2 min-free-slots tch/h (<0-9999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested' /></span><br><span> <param name='tch/h' doc='Minimum free TCH/H timeslots before cell is considered congested' /></span><br><span> <param name='<0-9999>' doc='Number of TCH/H slots' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span>@@ -2559,7 +2713,7 @@</span><br><span> <command id='handover2 max-handovers (<1-9999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='max-handovers' doc='Maximum number of concurrent handovers allowed per cell (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='max-handovers' doc='Maximum number of concurrent handovers allowed per cell' /></span><br><span> <param name='<1-9999>' doc='Number' /></span><br><span> <param name='default' doc='Use default (9999), remove explicit setting on this node' /></span><br><span> </params></span><br><span>@@ -2567,7 +2721,7 @@</span><br><span> <command id='handover2 penalty-time max-distance (<0-99999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='penalty-time' doc='Set penalty times to wait between repeated handovers (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /></span><br><span> <param name='max-distance' doc='Time to suspend handovers after leaving this cell due to exceeding max distance' /></span><br><span> <param name='<0-99999>' doc='Seconds' /></span><br><span> <param name='default' doc='Use default (300), remove explicit setting on this node' /></span><br><span>@@ -2576,7 +2730,7 @@</span><br><span> <command id='handover2 penalty-time failed-ho (<0-99999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='penalty-time' doc='Set penalty times to wait between repeated handovers (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /></span><br><span> <param name='failed-ho' doc='Time to suspend handovers after handover failure to this cell' /></span><br><span> <param name='<0-99999>' doc='Seconds' /></span><br><span> <param name='default' doc='Use default (60), remove explicit setting on this node' /></span><br><span>@@ -2585,7 +2739,7 @@</span><br><span> <command id='handover2 penalty-time failed-assignment (<0-99999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='penalty-time' doc='Set penalty times to wait between repeated handovers (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /></span><br><span> <param name='failed-assignment' doc='Time to suspend handovers after assignment failure in this cell' /></span><br><span> <param name='<0-99999>' doc='Seconds' /></span><br><span> <param name='default' doc='Use default (60), remove explicit setting on this node' /></span><br><span>@@ -2594,75 +2748,15 @@</span><br><span> <command id='handover2 retries (<0-9>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='retries' doc='Immediately retry on handover/assignment failure (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='retries' doc='Immediately retry on handover/assignment failure' /></span><br><span> <param name='<0-9>' doc='Number of retries' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover window rxlev averaging (<1-10>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='window' doc='Measurement averaging settings' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='rxlev' doc='Received-Level averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='averaging' doc='How many RxLev measurements are used for averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-10>' doc='RxLev averaging: Number of values to average over' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (10), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover window rxqual averaging (<1-10>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='window' doc='Measurement averaging settings' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='rxqual' doc='Received-Quality averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='averaging' doc='How many RxQual measurements are used for averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-10>' doc='RxQual averaging: Number of values to average over' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (1), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover window rxlev neighbor averaging (<1-10>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='window' doc='Measurement averaging settings' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='rxlev' doc='Received-Level averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='neighbor' doc='How many Neighbor RxLev measurements are used for averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='averaging' doc='How many Neighbor RxLev measurements are used for averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-10>' doc='Neighbor RxLev averaging: Number of values to average over' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (10), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover power budget interval (<1-99>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='power' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='budget' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='interval' doc='How often to check for a better cell (SACCH frames)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-99>' doc='Check for stronger neighbor every N number of SACCH frames' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (6), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover power budget hysteresis (<0-999>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='power' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='budget' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='hysteresis' doc='How many dBm stronger must a neighbor be to become a HO candidate' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-999>' doc='Neighbor's strength difference in dBm' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (3), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover maximum distance (<0-9999>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='maximum' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='distance' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-9999>' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (9999), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span> <command id='handover2 congestion-check (disabled|<1-999>|now)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='congestion-check' doc='Configure congestion check interval (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='congestion-check' doc='Configure congestion check interval' /></span><br><span> <param name='disabled' doc='Disable congestion checking, do not handover based on cell overload' /></span><br><span> <param name='<1-999>' doc='Congestion check interval in seconds (default 10)' /></span><br><span> <param name='now' doc='Manually trigger a congestion check to run right now' /></span><br><span>@@ -2739,12 +2833,6 @@</span><br><span> <param name='<0-65535>' doc='LAC' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='training_sequence_code <0-7>'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='training_sequence_code' doc='Set the Training Sequence Code (TSC) of this BTS' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-7>' doc='TSC' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span> <command id='base_station_id_code <0-63>'></span><br><span> <params></span><br><span> <param name='base_station_id_code' doc='Set the Base Station Identity Code (BSIC) of this BTS' /></span><br><span>@@ -3780,6 +3868,97 @@</span><br><span> <param name='<1-10>' doc='Set the number of Access Control Classes to enable per ramping step' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='neighbor bts <0-255>'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bts' doc='Add Neighbor cell by local BTS number' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-255>' doc='BTS number' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='neighbor lac <0-65535>'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='lac' doc='Add Neighbor cell by LAC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='LAC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='neighbor lac-ci <0-65535> <0-65535>'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='lac-ci' doc='Add Neighbor cell by LAC and CI' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='LAC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='CI' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='neighbor cgi <0-999> <0-999> <0-65535> <0-65535>'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cgi' doc='Add Neighbor cell by cgi' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-999>' doc='MCC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-999>' doc='MNC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='LAC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='CI' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='neighbor lac <0-65535> arfcn <0-1023> bsic (<0-63>|any)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='lac' doc='Add Neighbor cell by LAC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='LAC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='arfcn' doc='ARFCN of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-1023>' doc='ARFCN value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bsic' doc='BSIC of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-63>' doc='BSIC value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='neighbor lac-ci <0-65535> <0-65535> arfcn <0-1023> bsic (<0-63>|any)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='lac-ci' doc='Add Neighbor cell by LAC and CI' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='LAC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='CI' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='arfcn' doc='ARFCN of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-1023>' doc='ARFCN value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bsic' doc='BSIC of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-63>' doc='BSIC value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='neighbor cgi <0-999> <0-999> <0-65535> <0-65535> arfcn <0-1023> bsic (<0-63>|any)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='cgi' doc='Add Neighbor cell by cgi' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-999>' doc='MCC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-999>' doc='MNC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='LAC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-65535>' doc='CI' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='arfcn' doc='ARFCN of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-1023>' doc='ARFCN value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bsic' doc='BSIC of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-63>' doc='BSIC value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='no neighbor bts <0-255>'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='no' doc='Negate a command or set its defaults' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Remove local or remote-BSS neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bts' doc='Neighbor cell by local BTS number' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-255>' doc='BTS number' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='no neighbor arfcn <0-1023> bsic (<0-63>|any)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='no' doc='Negate a command or set its defaults' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='neighbor' doc='Remove local or remote-BSS neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='arfcn' doc='ARFCN of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-1023>' doc='ARFCN value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='bsic' doc='BSIC of neighbor cell' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-63>' doc='BSIC value' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='trx <0-255>'></span><br><span> <params></span><br><span> <param name='trx' doc='Radio Transceiver' /></span><br><span>@@ -3878,8 +4057,8 @@</span><br><span> <param name='handover1' doc='Handover options for handover decision algorithm 1' /></span><br><span> <param name='power' doc='Neighbor cell power triggering' /></span><br><span> <param name='budget' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='hysteresis' doc='How many dBm stronger must a neighbor be to become a HO candidate' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-999>' doc='Neighbor's strength difference in dBm' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='hysteresis' doc='How many dB stronger must a neighbor be to become a HO candidate' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-999>' doc='Neighbor's strength difference in dB' /></span><br><span> <param name='default' doc='Use default (3), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span>@@ -3938,8 +4117,8 @@</span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span> <param name='power' doc='Neighbor cell power triggering' /></span><br><span> <param name='budget' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='hysteresis' doc='How many dBm stronger must a neighbor be to become a HO candidate' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-999>' doc='Neighbor's strength difference in dBm' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='hysteresis' doc='How many dB stronger must a neighbor be to become a HO candidate' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-999>' doc='Neighbor's strength difference in dB' /></span><br><span> <param name='default' doc='Use default (3), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span>@@ -3955,7 +4134,7 @@</span><br><span> <command id='handover2 assignment (0|1|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='assignment' doc='Enable or disable in-call channel re-assignment (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='assignment' doc='Enable or disable in-call channel re-assignment' /></span><br><span> <param name='0' doc='Disable in-call assignment' /></span><br><span> <param name='1' doc='Enable in-call assignment' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span>@@ -3964,7 +4143,7 @@</span><br><span> <command id='handover2 tdma-measurement (full|subset|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='tdma-measurement' doc='Define measurement set of TDMA frames (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='tdma-measurement' doc='Define measurement set of TDMA frames' /></span><br><span> <param name='full' doc='Full set of 102/104 TDMA frames' /></span><br><span> <param name='subset' doc='Sub set of 4 TDMA frames (SACCH)' /></span><br><span> <param name='default' doc='Use default (subset), remove explicit setting on this node' /></span><br><span>@@ -3973,7 +4152,7 @@</span><br><span> <command id='handover2 min rxlev (<-110--50>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='min' doc='Minimum Level/Quality thresholds before triggering HO (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='min' doc='Minimum Level/Quality thresholds before triggering HO' /></span><br><span> <param name='rxlev' doc='How weak may RxLev of an MS become before triggering HO' /></span><br><span> <param name='<-110--50>' doc='minimum RxLev (dBm)' /></span><br><span> <param name='default' doc='Use default (-100), remove explicit setting on this node' /></span><br><span>@@ -3982,34 +4161,34 @@</span><br><span> <command id='handover2 min rxqual (<0-7>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='min' doc='Minimum Level/Quality thresholds before triggering HO (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='min' doc='Minimum Level/Quality thresholds before triggering HO' /></span><br><span> <param name='rxqual' doc='How bad may RxQual of an MS become before triggering HO' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-7>' doc='minimum RxQual (dBm)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-7>' doc='minimum RxQual' /></span><br><span> <param name='default' doc='Use default (5), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span> <command id='handover2 afs-bias rxlev (<0-20>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs' /></span><br><span> <param name='rxlev' doc='RxLev improvement bias for AFS over other codecs' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-20>' doc='Virtual RxLev improvement (dBm)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-20>' doc='Virtual RxLev improvement (dB)' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span> <command id='handover2 afs-bias rxqual (<0-7>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs' /></span><br><span> <param name='rxqual' doc='RxQual improvement bias for AFS over other codecs' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-7>' doc='Virtual RxQual improvement (dBm)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='<0-7>' doc='Virtual RxQual improvement' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span> <command id='handover2 min-free-slots tch/f (<0-9999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested' /></span><br><span> <param name='tch/f' doc='Minimum free TCH/F timeslots before cell is considered congested' /></span><br><span> <param name='<0-9999>' doc='Number of TCH/F slots' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span>@@ -4018,7 +4197,7 @@</span><br><span> <command id='handover2 min-free-slots tch/h (<0-9999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested' /></span><br><span> <param name='tch/h' doc='Minimum free TCH/H timeslots before cell is considered congested' /></span><br><span> <param name='<0-9999>' doc='Number of TCH/H slots' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span>@@ -4027,7 +4206,7 @@</span><br><span> <command id='handover2 max-handovers (<1-9999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='max-handovers' doc='Maximum number of concurrent handovers allowed per cell (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='max-handovers' doc='Maximum number of concurrent handovers allowed per cell' /></span><br><span> <param name='<1-9999>' doc='Number' /></span><br><span> <param name='default' doc='Use default (9999), remove explicit setting on this node' /></span><br><span> </params></span><br><span>@@ -4035,7 +4214,7 @@</span><br><span> <command id='handover2 penalty-time max-distance (<0-99999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='penalty-time' doc='Set penalty times to wait between repeated handovers (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /></span><br><span> <param name='max-distance' doc='Time to suspend handovers after leaving this cell due to exceeding max distance' /></span><br><span> <param name='<0-99999>' doc='Seconds' /></span><br><span> <param name='default' doc='Use default (300), remove explicit setting on this node' /></span><br><span>@@ -4044,7 +4223,7 @@</span><br><span> <command id='handover2 penalty-time failed-ho (<0-99999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='penalty-time' doc='Set penalty times to wait between repeated handovers (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /></span><br><span> <param name='failed-ho' doc='Time to suspend handovers after handover failure to this cell' /></span><br><span> <param name='<0-99999>' doc='Seconds' /></span><br><span> <param name='default' doc='Use default (60), remove explicit setting on this node' /></span><br><span>@@ -4053,7 +4232,7 @@</span><br><span> <command id='handover2 penalty-time failed-assignment (<0-99999>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='penalty-time' doc='Set penalty times to wait between repeated handovers (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /></span><br><span> <param name='failed-assignment' doc='Time to suspend handovers after assignment failure in this cell' /></span><br><span> <param name='<0-99999>' doc='Seconds' /></span><br><span> <param name='default' doc='Use default (60), remove explicit setting on this node' /></span><br><span>@@ -4062,71 +4241,11 @@</span><br><span> <command id='handover2 retries (<0-9>|default)'></span><br><span> <params></span><br><span> <param name='handover2' doc='Handover options for handover decision algorithm 2' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='retries' doc='Immediately retry on handover/assignment failure (HO algo 2 only)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='retries' doc='Immediately retry on handover/assignment failure' /></span><br><span> <param name='<0-9>' doc='Number of retries' /></span><br><span> <param name='default' doc='Use default (0), remove explicit setting on this node' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover window rxlev averaging (<1-10>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='window' doc='Measurement averaging settings' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='rxlev' doc='Received-Level averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='averaging' doc='How many RxLev measurements are used for averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-10>' doc='RxLev averaging: Number of values to average over' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (10), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover window rxqual averaging (<1-10>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='window' doc='Measurement averaging settings' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='rxqual' doc='Received-Quality averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='averaging' doc='How many RxQual measurements are used for averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-10>' doc='RxQual averaging: Number of values to average over' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (1), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover window rxlev neighbor averaging (<1-10>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='window' doc='Measurement averaging settings' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='rxlev' doc='Received-Level averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='neighbor' doc='How many Neighbor RxLev measurements are used for averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='averaging' doc='How many Neighbor RxLev measurements are used for averaging' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-10>' doc='Neighbor RxLev averaging: Number of values to average over' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (10), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover power budget interval (<1-99>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='power' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='budget' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='interval' doc='How often to check for a better cell (SACCH frames)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-99>' doc='Check for stronger neighbor every N number of SACCH frames' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (6), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover power budget hysteresis (<0-999>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='power' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='budget' doc='Neighbor cell power triggering' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='hysteresis' doc='How many dBm stronger must a neighbor be to become a HO candidate' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-999>' doc='Neighbor's strength difference in dBm' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (3), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='handover maximum distance (<0-9999>|default)'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='handover' doc='Legacy alias for 'handover1': Handover options for handover decision algorithm 1' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='maximum' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='distance' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-9999>' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='default' doc='Use default (9999), remove explicit setting on this node' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span> </node></span><br><span> <node id='config-net-bts-trx'></span><br><span> <name>config-net-bts-trx</name></span><br><span>@@ -4218,12 +4337,6 @@</span><br><span> <param name='tch/f_tch/h_pdch' doc='Dynamic TCH/F or TCH/H or GPRS PDCH' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='phys_chan_config PCHAN'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='phys_chan_config' doc='Physical Channel configuration (TCH/SDCCH/...)' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='PCHAN' doc='Physical Channel' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span> <command id='training_sequence_code <0-7>'></span><br><span> <params></span><br><span> <param name='training_sequence_code' doc='Training Sequence Code of the Timeslot' /></span><br><span>@@ -4340,54 +4453,6 @@</span><br><span> <param name='.LIST' doc='List of audio codecs, e.g. fr3 fr1 hr3' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='dest A.B.C.D <1-65000> <0-255>'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='dest' doc='Add a destination to a MUX/MSC' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='A.B.C.D' doc='IP Address' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65000>' doc='Port' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-255>' doc='DSCP' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='no dest A.B.C.D <1-65000> <0-255>'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='no' doc='Negate a command or set its defaults' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='dest' doc='Remove a destination to a MUX/MSC' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='A.B.C.D' doc='IP Address' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65000>' doc='Port' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-255>' doc='DSCP' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='no timeout-ping'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='no' doc='Negate a command or set its defaults' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timeout-ping' doc='Disable the ping/pong handling on A-link' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timeout-ping <1-2147483647>'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timeout-ping' doc='Set the PING interval, negative for not sending PING' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-2147483647>' doc='Timeout in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timeout-pong <1-2147483647>'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timeout-pong' doc='Set the time to wait for a PONG' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-2147483647>' doc='Timeout in seconds' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='timeout-ping advanced'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timeout-ping' doc='Ping timeout handling' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='advanced' doc='Enable advanced mode during SCCP' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='no timeout-ping advanced'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='no' doc='Negate a command or set its defaults' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='timeout-ping' doc='Ping timeout handling' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='advanced' doc='Enable advanced mode during SCCP' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span> <command id='bsc-welcome-text .TEXT'></span><br><span> <params></span><br><span> <param name='bsc-welcome-text' doc='Set the USSD notification to be sent' /></span><br><span>@@ -4508,6 +4573,20 @@</span><br><span> <param name='forbidden' doc='Forbidden' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='lcls-mode (disabled|mgw-loop)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='lcls-mode' doc='Configure 3GPP LCLS (Local Call, Local Switch)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='disabled' doc='Disable LCLS for all calls of this MSC' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='mgw-loop' doc='Enable LCLS with loopping traffic in MGW' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='lcls-codec-mismatch (allowed|forbidden)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='lcls-codec-mismatch' doc='Allow 3GPP LCLS (Local Call, Local Switch) when call legs use different codec/rate' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='allowed' doc='Allow LCLS only only for calls that use the same codec/rate on both legs' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='forbidden' doc='Do not Allow LCLS for calls that use a different codec/rate on both legs' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='access-list-name NAME'></span><br><span> <params></span><br><span> <param name='access-list-name' doc='Set the name of the access list to use.' /></span><br><span>@@ -4532,6 +4611,14 @@</span><br><span> <param name='NAME' doc='SCCP address name' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='asp-protocol (m3ua|sua|ipa)'></span><br><span style="color: hsl(120, 100%, 40%);">+ <params></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='asp-protocol' doc='A interface protocol to use for this MSC)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='m3ua' doc='MTP3 User Adaptation' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='sua' doc='SCCP User Adaptation' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /></span><br><span style="color: hsl(120, 100%, 40%);">+ </params></span><br><span style="color: hsl(120, 100%, 40%);">+ </command></span><br><span> <command id='mgw local-ip A.B.C.D'></span><br><span> <params></span><br><span> <param name='mgw' doc='Configure MGCP connection to Media Gateway' /></span><br><span>@@ -4575,47 +4662,18 @@</span><br><span> <param name='<0-65534>' doc='UDP Port number' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='mgcpgw local-ip A.B.C.D'></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='mgw x-osmo-ign call-id'></span><br><span> <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mgcpgw' doc='Configure MGCP connection to Media Gateway' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='local-ip' doc='local bind to connect to MGCP gateway with' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='A.B.C.D' doc='local bind IP address' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='mgw' doc='Configure MGCP connection to Media Gateway' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='x-osmo-ign' doc='Set a (non-standard) X-Osmo-IGN header in all CRCX messages for RTP streams associated with this MSC, useful for A/SCCPlite MSCs, since osmo-bsc cannot know the MSC's chosen CallID. This is enabled by default for A/SCCPlite connections, disabled by default for all others.' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='call-id' doc='Send 'X-Osmo-IGN: C' to ignore CallID mismatches. See OsmoMGW.' /></span><br><span> </params></span><br><span> </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='mgcpgw local-port <0-65535>'></span><br><span style="color: hsl(120, 100%, 40%);">+ <command id='no mgw x-osmo-ign'></span><br><span> <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mgcpgw' doc='Configure MGCP connection to Media Gateway' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='local-port' doc='local bind to connect to MGCP gateway with' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-65535>' doc='local bind port' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='mgcpgw remote-ip A.B.C.D'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mgcpgw' doc='Configure MGCP connection to Media Gateway' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='remote-ip' doc='remote bind to connect to MGCP gateway with' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='A.B.C.D' doc='remote bind IP address' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='mgcpgw remote-port <0-65535>'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mgcpgw' doc='Configure MGCP connection to Media Gateway' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='remote-port' doc='remote bind to connect to MGCP gateway with' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-65535>' doc='remote bind port' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='mgcpgw endpoint-range <1-65534> <1-65534>'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mgcpgw' doc='Configure MGCP connection to Media Gateway' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='endpoint-range' doc='usable range of endpoint identifiers' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65534>' doc='set first useable endpoint identifier' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<1-65534>' doc='set the last useable endpoint identifier' /></span><br><span style="color: hsl(0, 100%, 40%);">- </params></span><br><span style="color: hsl(0, 100%, 40%);">- </command></span><br><span style="color: hsl(0, 100%, 40%);">- <command id='mgcpgw bts-base <0-65534>'></span><br><span style="color: hsl(0, 100%, 40%);">- <params></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='mgcpgw' doc='Configure MGCP connection to Media Gateway' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='bts-base' doc='First UDP port allocated for the BTS side' /></span><br><span style="color: hsl(0, 100%, 40%);">- <param name='<0-65534>' doc='UDP Port number' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='no' doc='Negate a command or set its defaults' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='mgw' doc='Configure MGCP connection to Media Gateway' /></span><br><span style="color: hsl(120, 100%, 40%);">+ <param name='x-osmo-ign' doc='Do not send X-Osmo-IGN MGCP header to this MSC' /></span><br><span> </params></span><br><span> </command></span><br><span> </node></span><br><span></span><br></pre><p>To view, visit <a href="https://gerrit.osmocom.org/11582">change 11582</a>. To unsubscribe, or for help writing mail filters, visit <a href="https://gerrit.osmocom.org/settings">settings</a>.</p><div itemscope itemtype="http://schema.org/EmailMessage"><div itemscope itemprop="action" itemtype="http://schema.org/ViewAction"><link itemprop="url" href="https://gerrit.osmocom.org/11582"/><meta itemprop="name" content="View Change"/></div></div>
<div style="display:none"> Gerrit-Project: osmo-gsm-manuals </div>
<div style="display:none"> Gerrit-Branch: master </div>
<div style="display:none"> Gerrit-MessageType: merged </div>
<div style="display:none"> Gerrit-Change-Id: Ia9ba8d5eba531b1156de57573ab42517e0c1ca15 </div>
<div style="display:none"> Gerrit-Change-Number: 11582 </div>
<div style="display:none"> Gerrit-PatchSet: 3 </div>
<div style="display:none"> Gerrit-Owner: Neels Hofmeyr <nhofmeyr@sysmocom.de> </div>
<div style="display:none"> Gerrit-Reviewer: Harald Welte <laforge@gnumonks.org> </div>
<div style="display:none"> Gerrit-Reviewer: Jenkins Builder (1000002) </div>