Change in osmo-gbproxy[master]: manuals: Regenerate counters/VTY through docker

daniel gerrit-no-reply at lists.osmocom.org
Wed Mar 10 11:25:22 UTC 2021


daniel has submitted this change. ( https://gerrit.osmocom.org/c/osmo-gbproxy/+/23294 )

Change subject: manuals: Regenerate counters/VTY through docker
......................................................................

manuals: Regenerate counters/VTY through docker

Related: SYS#5115, SYS#5005
Change-Id: I39d60a7fd7ec66f3f20bfcef5c32502598f2708f
---
M doc/manuals/regen_doc.sh
D doc/manuals/vty/gbproxy_vty_reference.xml
2 files changed, 11 insertions(+), 1,606 deletions(-)

Approvals:
  Jenkins Builder: Verified
  osmith: Looks good to me, but someone else must approve
  pespin: Looks good to me, but someone else must approve
  daniel: Looks good to me, approved



diff --git a/doc/manuals/regen_doc.sh b/doc/manuals/regen_doc.sh
index e68e7e5..7014b90 100755
--- a/doc/manuals/regen_doc.sh
+++ b/doc/manuals/regen_doc.sh
@@ -1,74 +1,17 @@
-#!/bin/sh -e
+#!/bin/sh -x
 
-require_osmo_interact_vty() {
-	if command -v osmo_interact_vty.py >/dev/null 2>&1; then
-		return
-	fi
-	echo "ERROR: osmo_interact_vty.py not found. Are osmo-python-tests in PATH?"
+if [ -z "$DOCKER_PLAYGROUND" ]; then
+	echo "You need to set DOCKER_PLAYGROUND"
 	exit 1
-}
+fi
 
-# $1: "update_vty_reference" or "update_counters"
-# $2: output file
-# $3: port
-# $4-$n: command
-interact_vty() {
-	action="$1"
-	output="$2"
-	port="$3"
-	log="/tmp/$4.log"
-	shift 3
+SCRIPT=$(realpath "$0")
+MANUAL_DIR=$(dirname "$SCRIPT")
 
-	echo "Starting in background: $@"
-	"$@" > "$log" 2>&1 &
-	pid="$!"
+COMMIT=${COMMIT:-$(git log -1 --format=format:%H)}
 
-	sleep 0.5
-	if ! kill -0 "$pid" 2>/dev/null; then
-		echo "ERROR: start failed!"
-		cat "$log"
-		exit 1
-	fi
+cd "$DOCKER_PLAYGROUND/scripts" || exit 1
 
-	case "$action" in
-		"update_vty_reference")
-			echo "Updating VTY reference: $output"
-			osmo_interact_vty.py -X -p "$port" -H 127.0.0.1 -O "$output"
-			;;
-		"update_counters")
-			echo "Updating asciidoc counters: $output"
-			osmo_interact_vty.py -c "enable;show asciidoc counters" -p "$port" -H 127.0.0.1 -O "$output"
-			;;
-		*)
-			echo "ERROR: invalid argument: $action"
-			exit 1
-			;;
-	esac
-
-	kill "$pid"
-	echo "Done (killed $1)"
-	echo
-}
-
-DIR="$(cd "$(dirname "$0")"; pwd)"
-echo $DIR
-cd "$DIR"
-
-require_osmo_interact_vty
-
-interact_vty \
-	"update_vty_reference" \
-	"vty/gbproxy_vty_reference.xml" \
-	4246 \
-	osmo-gbproxy -c "../examples/osmo-gbproxy/osmo-gbproxy.cfg"
-
-sleep 5
-
-interact_vty \
-	"update_counters" \
-	"chapters/counters_generated.adoc" \
-	4246 \
-	osmo-gbproxy -c "../examples/osmo-gbproxy/osmo-gbproxy.cfg"
-
-
-echo "Done with all"
+OSMO_BSC_BRANCH=$COMMIT ./regen_doc.sh osmo-gbproxy 4246 \
+	"$MANUAL_DIR/chapters/counters_generated.adoc" \
+	"$MANUAL_DIR/vty/gbproxy_vty_reference.xml"
diff --git a/doc/manuals/vty/gbproxy_vty_reference.xml b/doc/manuals/vty/gbproxy_vty_reference.xml
deleted file mode 100644
index 19b04e1..0000000
--- a/doc/manuals/vty/gbproxy_vty_reference.xml
+++ /dev/null
@@ -1,1538 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-  <node id='_common_cmds_'>
-    <name>Common Commands</name>
-    <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list [with-flags]'>
-      <params>
-        <param name='list' doc='Print command list' />
-        <param name='[with-flags]' doc='Also print the VTY attribute flags' />
-      </params>
-    </command>
-    <command id='show vty-attributes'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='vty-attributes' doc='List of VTY attributes' />
-      </params>
-    </command>
-    <command id='show vty-attributes (application|library|global)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='vty-attributes' doc='List of VTY attributes' />
-        <param name='application' doc='Application specific attributes only' />
-        <param name='library' doc='Library specific attributes only' />
-        <param name='global' doc='Global attributes only' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file [PATH]'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-        <param name='[PATH]' doc='Set file path to store the config, or replace if already exists' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-  </node>
-  <node id='view'>
-    <name>view</name>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='enable [expert-mode]'>
-      <params>
-        <param name='enable' doc='Turn on privileged mode command' />
-        <param name='[expert-mode]' doc='Enable the expert mode (show hidden commands)' />
-      </params>
-    </command>
-    <command id='terminal length <0-512>'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
-      </params>
-    </command>
-    <command id='logging level (|gprs|ns|obj|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='gprs' doc='GPRS Packet Service' />
-        <param name='ns' doc='GPRS Network Service (NS)' />
-        <param name='obj' doc='GbProxy object allocation/release' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='lns' doc='GPRS NS layer' />
-        <param name='lbssgp' doc='GPRS BSSGP layer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
-      </params>
-    </command>
-    <command id='logp (|gprs|ns|obj|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp) (debug|info|notice|error|fatal) .LOGMESSAGE'>
-      <params>
-        <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
-        <param name='gprs' doc='GPRS Packet Service' />
-        <param name='ns' doc='GPRS Network Service (NS)' />
-        <param name='obj' doc='GbProxy object allocation/release' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='lns' doc='GPRS NS layer' />
-        <param name='lbssgp' doc='GPRS BSSGP layer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-        <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application's context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application's context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='tree' doc='Display only a specific memory chunk' />
-        <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application's context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='filter' doc='Filter chunks using regular expression' />
-        <param name='REGEXP' doc='Regular expression' />
-      </params>
-    </command>
-    <command id='show stats'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-      </params>
-    </command>
-    <command id='show stats level (global|peer|subscriber)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Show global groups only' />
-        <param name='peer' doc='Show global and network peer related groups' />
-        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='show asciidoc counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='asciidoc' doc='Asciidoc generation' />
-        <param name='counters' doc='Generate table of all registered counters' />
-      </params>
-    </command>
-    <command id='show rate-counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='rate-counters' doc='Show all rate counters' />
-      </params>
-    </command>
-    <command id='show fsm NAME'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm' doc='Show information about finite state machines' />
-        <param name='NAME' doc='Display information about a single named finite state machine' />
-      </params>
-    </command>
-    <command id='show fsm all'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm' doc='Show information about finite state machines' />
-        <param name='all' doc='Display a list of all registered finite state machines' />
-      </params>
-    </command>
-    <command id='show fsm-instances NAME'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm-instances' doc='Show information about finite state machine instances' />
-        <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
-      </params>
-    </command>
-    <command id='show fsm-instances all'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm-instances' doc='Show information about finite state machine instances' />
-        <param name='all' doc='Display a list of all FSM instances of all finite state machine' />
-      </params>
-    </command>
-    <command id='show gbproxy bvc (bss|sgsn) [stats]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gbproxy' doc='Display information about the Gb proxy' />
-        <param name='bvc' doc='Show BSSGP Virtual Connections' />
-        <param name='bss' doc='Display BSS-side BVCs' />
-        <param name='sgsn' doc='Display SGSN-side BVCs' />
-        <param name='[stats]' doc='Show statistics' />
-      </params>
-    </command>
-    <command id='show gbproxy cell [stats]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gbproxy' doc='Display information about the Gb proxy' />
-        <param name='cell' doc='Show GPRS Cell Information' />
-        <param name='[stats]' doc='Show statistics' />
-      </params>
-    </command>
-    <command id='show gbproxy links'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gbproxy' doc='Display information about the Gb proxy' />
-        <param name='links' doc='Show logical links' />
-      </params>
-    </command>
-    <command id='show gbproxy tlli-cache'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gbproxy' doc='Display information about the Gb proxy' />
-        <param name='tlli-cache' doc='Show TLLI cache entries' />
-      </params>
-    </command>
-    <command id='show gbproxy imsi-cache'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gbproxy' doc='Display information about the Gb proxy' />
-        <param name='imsi-cache' doc='Show IMSI cache entries' />
-      </params>
-    </command>
-    <command id='show nri all'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
-        <param name='all' doc='Show all SGSNs' />
-      </params>
-    </command>
-    <command id='show nri nsei <0-65535>'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
-        <param name='nsei' doc='Identify SGSN by NSEI' />
-        <param name='<0-65535>' doc='NSEI of the SGSN' />
-      </params>
-    </command>
-    <command id='logging filter bvc bvci <0-65535>'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='bvc' doc='Filter based on BSSGP VC' />
-        <param name='bvci' doc='Identify BVC by BVCI' />
-        <param name='<0-65535>' doc='Numeric identifier' />
-      </params>
-    </command>
-  </node>
-  <node id='enable'>
-    <name>enable</name>
-    <command id='disable'>
-      <params>
-        <param name='disable' doc='Turn off privileged mode command' />
-      </params>
-    </command>
-    <command id='configure terminal'>
-      <params>
-        <param name='configure' doc='Configuration from vty interface' />
-        <param name='terminal' doc='Configuration terminal' />
-      </params>
-    </command>
-    <command id='copy running-config startup-config'>
-      <params>
-        <param name='copy' doc='Copy configuration' />
-        <param name='running-config' doc='Copy running config to... ' />
-        <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
-      </params>
-    </command>
-    <command id='show startup-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='startup-config' doc='Contentes of startup configuration' />
-      </params>
-    </command>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='terminal length <0-512>'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='terminal monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='terminal no monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
-      </params>
-    </command>
-    <command id='logging level (|gprs|ns|obj|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='gprs' doc='GPRS Packet Service' />
-        <param name='ns' doc='GPRS Network Service (NS)' />
-        <param name='obj' doc='GbProxy object allocation/release' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='lns' doc='GPRS NS layer' />
-        <param name='lbssgp' doc='GPRS BSSGP layer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
-      </params>
-    </command>
-    <command id='logp (|gprs|ns|obj|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp) (debug|info|notice|error|fatal) .LOGMESSAGE'>
-      <params>
-        <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
-        <param name='gprs' doc='GPRS Packet Service' />
-        <param name='ns' doc='GPRS Network Service (NS)' />
-        <param name='obj' doc='GbProxy object allocation/release' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='lns' doc='GPRS NS layer' />
-        <param name='lbssgp' doc='GPRS BSSGP layer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-        <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application's context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application's context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='tree' doc='Display only a specific memory chunk' />
-        <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application's context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='filter' doc='Filter chunks using regular expression' />
-        <param name='REGEXP' doc='Regular expression' />
-      </params>
-    </command>
-    <command id='show stats'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-      </params>
-    </command>
-    <command id='show stats level (global|peer|subscriber)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Show global groups only' />
-        <param name='peer' doc='Show global and network peer related groups' />
-        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='show asciidoc counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='asciidoc' doc='Asciidoc generation' />
-        <param name='counters' doc='Generate table of all registered counters' />
-      </params>
-    </command>
-    <command id='show rate-counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='rate-counters' doc='Show all rate counters' />
-      </params>
-    </command>
-    <command id='stats report'>
-      <params>
-        <param name='stats' doc='Stats related commands' />
-        <param name='report' doc='Manurally trigger reporting of stats' />
-      </params>
-    </command>
-    <command id='stats reset'>
-      <params>
-        <param name='stats' doc='Stats related commands' />
-        <param name='reset' doc='Reset all stats' />
-      </params>
-    </command>
-    <command id='show fsm NAME'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm' doc='Show information about finite state machines' />
-        <param name='NAME' doc='Display information about a single named finite state machine' />
-      </params>
-    </command>
-    <command id='show fsm all'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm' doc='Show information about finite state machines' />
-        <param name='all' doc='Display a list of all registered finite state machines' />
-      </params>
-    </command>
-    <command id='show fsm-instances NAME'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm-instances' doc='Show information about finite state machine instances' />
-        <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
-      </params>
-    </command>
-    <command id='show fsm-instances all'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm-instances' doc='Show information about finite state machine instances' />
-        <param name='all' doc='Display a list of all FSM instances of all finite state machine' />
-      </params>
-    </command>
-    <command id='show gbproxy bvc (bss|sgsn) [stats]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gbproxy' doc='Display information about the Gb proxy' />
-        <param name='bvc' doc='Show BSSGP Virtual Connections' />
-        <param name='bss' doc='Display BSS-side BVCs' />
-        <param name='sgsn' doc='Display SGSN-side BVCs' />
-        <param name='[stats]' doc='Show statistics' />
-      </params>
-    </command>
-    <command id='show gbproxy cell [stats]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gbproxy' doc='Display information about the Gb proxy' />
-        <param name='cell' doc='Show GPRS Cell Information' />
-        <param name='[stats]' doc='Show statistics' />
-      </params>
-    </command>
-    <command id='show gbproxy links'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gbproxy' doc='Display information about the Gb proxy' />
-        <param name='links' doc='Show logical links' />
-      </params>
-    </command>
-    <command id='show gbproxy tlli-cache'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gbproxy' doc='Display information about the Gb proxy' />
-        <param name='tlli-cache' doc='Show TLLI cache entries' />
-      </params>
-    </command>
-    <command id='show gbproxy imsi-cache'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gbproxy' doc='Display information about the Gb proxy' />
-        <param name='imsi-cache' doc='Show IMSI cache entries' />
-      </params>
-    </command>
-    <command id='show nri all'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
-        <param name='all' doc='Show all SGSNs' />
-      </params>
-    </command>
-    <command id='show nri nsei <0-65535>'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
-        <param name='nsei' doc='Identify SGSN by NSEI' />
-        <param name='<0-65535>' doc='NSEI of the SGSN' />
-      </params>
-    </command>
-    <command id='logging filter bvc bvci <0-65535>'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='bvc' doc='Filter based on BSSGP VC' />
-        <param name='bvci' doc='Identify BVC by BVCI' />
-        <param name='<0-65535>' doc='Numeric identifier' />
-      </params>
-    </command>
-    <command id='delete-gbproxy-peer <0-65534> bvci <2-65534>'>
-      <params>
-        <param name='delete-gbproxy-peer' doc='Delete a GBProxy bvc by NSEI and optionally BVCI' />
-        <param name='<0-65534>' doc='NSEI number' />
-        <param name='bvci' doc='Only delete bvc with a matching BVCI' />
-        <param name='<2-65534>' doc='BVCI number' />
-      </params>
-    </command>
-    <command id='delete-gbproxy-peer <0-65534> (only-bvc|only-nsvc|all) [dry-run]'>
-      <params>
-        <param name='delete-gbproxy-peer' doc='Delete a GBProxy bvc by NSEI and optionally BVCI' />
-        <param name='<0-65534>' doc='NSEI number' />
-        <param name='only-bvc' doc='Only delete BSSGP connections (BVC)' />
-        <param name='only-nsvc' doc='Only delete dynamic NS connections (NS-VC)' />
-        <param name='all' doc='Delete BVC and dynamic NS connections' />
-        <param name='[dry-run]' doc='Show what would be deleted instead of actually deleting' />
-      </params>
-    </command>
-  </node>
-  <node id='config'>
-    <name>config</name>
-    <command id='hostname WORD'>
-      <params>
-        <param name='hostname' doc='Set system's network name' />
-        <param name='WORD' doc='This system's network name' />
-      </params>
-    </command>
-    <command id='no hostname [HOSTNAME]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='hostname' doc='Reset system's network name' />
-        <param name='[HOSTNAME]' doc='Host name of this router' />
-      </params>
-    </command>
-    <command id='password (8|) WORD'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN line password string' />
-      </params>
-    </command>
-    <command id='password LINE'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
-      </params>
-    </command>
-    <command id='enable password (8|) WORD'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN 'enable' password string' />
-      </params>
-    </command>
-    <command id='enable password LINE'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
-      </params>
-    </command>
-    <command id='no enable password'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-      </params>
-    </command>
-    <command id='banner motd default'>
-      <params>
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-        <param name='default' doc='Default string' />
-      </params>
-    </command>
-    <command id='banner motd file [FILE]'>
-      <params>
-        <param name='banner' doc='Set banner' />
-        <param name='motd' doc='Banner for motd' />
-        <param name='file' doc='Banner from a file' />
-        <param name='[FILE]' doc='Filename' />
-      </params>
-    </command>
-    <command id='no banner motd'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-      </params>
-    </command>
-    <command id='service terminal-length <0-512>'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='no service terminal-length [<0-512>]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='line vty'>
-      <params>
-        <param name='line' doc='Configure a terminal line' />
-        <param name='vty' doc='Virtual terminal' />
-      </params>
-    </command>
-    <command id='service advanced-vty'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='no service advanced-vty'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='log stderr'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='no log stderr'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='log file .FILENAME'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='no log file .FILENAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='log alarms <2-32700>'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-        <param name='<2-32700>' doc='Maximum number of messages to log' />
-      </params>
-    </command>
-    <command id='no log alarms'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-      </params>
-    </command>
-    <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='authpriv' doc='Security/authorization messages facility' />
-        <param name='cron' doc='Clock daemon (cron/at) facility' />
-        <param name='daemon' doc='General system daemon facility' />
-        <param name='ftp' doc='Ftp daemon facility' />
-        <param name='lpr' doc='Line printer facility' />
-        <param name='mail' doc='Mail facility' />
-        <param name='news' doc='News facility' />
-        <param name='user' doc='Generic facility' />
-        <param name='uucp' doc='UUCP facility' />
-      </params>
-    </command>
-    <command id='log syslog local <0-7>'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='local' doc='Syslog LOCAL facility' />
-        <param name='<0-7>' doc='Local facility number' />
-      </params>
-    </command>
-    <command id='no log syslog'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-      </params>
-    </command>
-    <command id='log systemd-journal [raw]'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='systemd-journal' doc='Logging to systemd-journal' />
-        <param name='[raw]' doc='Offload rendering of the meta information (location, category) to systemd' />
-      </params>
-    </command>
-    <command id='no log systemd-journal'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='systemd-journal' doc='Logging to systemd-journal' />
-      </params>
-    </command>
-    <command id='log gsmtap [HOSTNAME]'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='gsmtap' doc='Logging via GSMTAP' />
-        <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
-      </params>
-    </command>
-    <command id='stats reporter statsd'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='statsd' doc='Report to a STATSD server' />
-      </params>
-    </command>
-    <command id='no stats reporter statsd'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='statsd' doc='Report to a STATSD server' />
-      </params>
-    </command>
-    <command id='stats reporter log'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='log' doc='Report to the logger' />
-      </params>
-    </command>
-    <command id='no stats reporter log'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='log' doc='Report to the logger' />
-      </params>
-    </command>
-    <command id='stats interval <0-65535>'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='interval' doc='Set the reporting interval' />
-        <param name='<0-65535>' doc='Interval in seconds (0 disables the reporting interval)' />
-      </params>
-    </command>
-    <command id='gbproxy'>
-      <params>
-        <param name='gbproxy' doc='Configure the Gb proxy' />
-      </params>
-    </command>
-    <command id='sgsn nsei <0-65534>'>
-      <params>
-        <param name='sgsn' doc='Configure the SGSN' />
-        <param name='nsei' doc='NSEI to be used in the connection with the SGSN' />
-        <param name='<0-65534>' doc='The NSEI' />
-      </params>
-    </command>
-  </node>
-  <node id='config-log'>
-    <name>config-log</name>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging level (|gprs|ns|obj|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='gprs' doc='GPRS Packet Service' />
-        <param name='ns' doc='GPRS Network Service (NS)' />
-        <param name='obj' doc='GbProxy object allocation/release' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='lns' doc='GPRS NS layer' />
-        <param name='lbssgp' doc='GPRS BSSGP layer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
-      </params>
-    </command>
-  </node>
-  <node id='config-stats'>
-    <name>config-stats</name>
-    <command id='local-ip ADDR'>
-      <params>
-        <param name='local-ip' doc='Set the IP address to which we bind locally' />
-        <param name='ADDR' doc='IP Address' />
-      </params>
-    </command>
-    <command id='no local-ip'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='local-ip' doc='Set the IP address to which we bind locally' />
-      </params>
-    </command>
-    <command id='remote-ip ADDR'>
-      <params>
-        <param name='remote-ip' doc='Set the remote IP address to which we connect' />
-        <param name='ADDR' doc='IP Address' />
-      </params>
-    </command>
-    <command id='remote-port <1-65535>'>
-      <params>
-        <param name='remote-port' doc='Set the remote port to which we connect' />
-        <param name='<1-65535>' doc='Remote port number' />
-      </params>
-    </command>
-    <command id='mtu <100-65535>'>
-      <params>
-        <param name='mtu' doc='Set the maximum packet size' />
-        <param name='<100-65535>' doc='Size in byte' />
-      </params>
-    </command>
-    <command id='no mtu'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='mtu' doc='Set the maximum packet size' />
-      </params>
-    </command>
-    <command id='prefix PREFIX'>
-      <params>
-        <param name='prefix' doc='Set the item name prefix' />
-        <param name='PREFIX' doc='The prefix string' />
-      </params>
-    </command>
-    <command id='no prefix'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='prefix' doc='Set the item name prefix' />
-      </params>
-    </command>
-    <command id='level (global|peer|subscriber)'>
-      <params>
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Report global groups only' />
-        <param name='peer' doc='Report global and network peer related groups' />
-        <param name='subscriber' doc='Report global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='enable'>
-      <params>
-        <param name='enable' doc='Enable the reporter' />
-      </params>
-    </command>
-    <command id='disable'>
-      <params>
-        <param name='disable' doc='Disable the reporter' />
-      </params>
-    </command>
-    <command id='flush-period <0-65535>'>
-      <params>
-        <param name='flush-period' doc='Configure stats sub-system' />
-        <param name='<0-65535>' doc='Send all stats even if they have not changed (i.e. force the flush)every N-th reporting interval. Set to 0 to disable regular flush (default).' />
-      </params>
-    </command>
-  </node>
-  <node id='config-line'>
-    <name>config-line</name>
-    <command id='login'>
-      <params>
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='no login'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='bind A.B.C.D [<0-65535>]'>
-      <params>
-        <param name='bind' doc='Accept VTY telnet connections on local interface' />
-        <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
-        <param name='[<0-65535>]' doc='Local TCP port number' />
-      </params>
-    </command>
-  </node>
-  <node id='config-gbproxy'>
-    <name>config-gbproxy</name>
-    <command id='pool bvc-flow-control-ratio <1-100>'>
-      <params>
-        <param name='pool' doc='SGSN Pool related configuration' />
-        <param name='bvc-flow-control-ratio' doc='Ratio of BSS-advertised bucket size + leak rate advertised to each SGSN' />
-        <param name='<1-100>' doc='Ratio of BSS-advertised bucket size + leak rate advertised to each SGSN (Percent)' />
-      </params>
-    </command>
-    <command id='nri bitlen <0-15>'>
-      <attributes scope='global'>
-        <attribute doc='This command applies immediately' flag='!' />
-      </attributes>
-      <params>
-        <param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
-        <param name='bitlen' doc='Set number of bits that an NRI has, to extract from TMSI identities (always starting just after the TMSI's most significant octet).' />
-        <param name='<0-15>' doc='bit count (0 disables) pooling)' />
-      </params>
-    </command>
-    <command id='nri null add <0-32767> [<0-32767>]'>
-      <attributes scope='global'>
-        <attribute doc='This command applies immediately' flag='!' />
-      </attributes>
-      <params>
-        <param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
-        <param name='null' doc='Define NULL-NRI values that cause re-assignment of an MS to a different SGSN, for SGSN pooling.' />
-        <param name='add' doc='Add NULL-NRI value (or range)' />
-        <param name='<0-32767>' doc='First value of the NRI value range, should not surpass the configured 'nri bitlen'.' />
-        <param name='[<0-32767>]' doc='Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.' />
-      </params>
-    </command>
-    <command id='nri null del <0-32767> [<0-32767>]'>
-      <attributes scope='global'>
-        <attribute doc='This command applies immediately' flag='!' />
-      </attributes>
-      <params>
-        <param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
-        <param name='null' doc='Define NULL-NRI values that cause re-assignment of an MS to a different SGSN, for SGSN pooling.' />
-        <param name='del' doc='Remove NRI value or range from the NRI mapping for this MSC' />
-        <param name='<0-32767>' doc='First value of the NRI value range, should not surpass the configured 'nri bitlen'.' />
-        <param name='[<0-32767>]' doc='Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.' />
-      </params>
-    </command>
-  </node>
-  <node id='config-sgsn'>
-    <name>config-sgsn</name>
-    <command id='name NAME'>
-      <params>
-        <param name='name' doc='Configure the SGSN' />
-        <param name='NAME' doc='Name the SGSN' />
-      </params>
-    </command>
-    <command id='allow-attach'>
-      <attributes scope='global'>
-        <attribute doc='This command applies immediately' flag='!' />
-      </attributes>
-      <params>
-        <param name='allow-attach' doc='Allow this SGSN to attach new subscribers (default).' />
-      </params>
-    </command>
-    <command id='no allow-attach'>
-      <attributes scope='global'>
-        <attribute doc='This command applies immediately' flag='!' />
-      </attributes>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='allow-attach' doc='Do not assign new subscribers to this MSC. Useful if an MSC in an MSC pool is configured to off-load subscribers. The MSC will still be operational for already IMSI-Attached subscribers, but the NAS node selection function will skip this MSC for new subscribers' />
-      </params>
-    </command>
-    <command id='nri add <0-32767> [<0-32767>]'>
-      <attributes scope='global'>
-        <attribute doc='This command applies immediately' flag='!' />
-      </attributes>
-      <params>
-        <param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
-        <param name='add' doc='Add NRI value or range to the NRI mapping for this MSC' />
-        <param name='<0-32767>' doc='First value of the NRI value range, should not surpass the configured 'nri bitlen'.' />
-        <param name='[<0-32767>]' doc='Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.' />
-      </params>
-    </command>
-    <command id='nri del <0-32767> [<0-32767>]'>
-      <attributes scope='global'>
-        <attribute doc='This command applies immediately' flag='!' />
-      </attributes>
-      <params>
-        <param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
-        <param name='del' doc='Remove NRI value or range from the NRI mapping for this MSC' />
-        <param name='<0-32767>' doc='First value of the NRI value range, should not surpass the configured 'nri bitlen'.' />
-        <param name='[<0-32767>]' doc='Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.' />
-      </params>
-    </command>
-  </node>
-</vtydoc>

-- 
To view, visit https://gerrit.osmocom.org/c/osmo-gbproxy/+/23294
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-gbproxy
Gerrit-Branch: master
Gerrit-Change-Id: I39d60a7fd7ec66f3f20bfcef5c32502598f2708f
Gerrit-Change-Number: 23294
Gerrit-PatchSet: 4
Gerrit-Owner: daniel <dwillmann at sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann at sysmocom.de>
Gerrit-Reviewer: fixeria <vyanitskiy at sysmocom.de>
Gerrit-Reviewer: osmith <osmith at sysmocom.de>
Gerrit-Reviewer: pespin <pespin at sysmocom.de>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20210310/83d7b8b2/attachment.htm>


More information about the gerrit-log mailing list