Change in osmo-bsc[master]: hodec2: add test case showing low rxqual tch/h<->tch/f oscillation

laforge gerrit-no-reply at lists.osmocom.org
Wed Jun 30 08:03:24 UTC 2021


laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bsc/+/24796 )

Change subject: hodec2: add test case showing low rxqual tch/h<->tch/f oscillation
......................................................................

hodec2: add test case showing low rxqual tch/h<->tch/f oscillation

Related: SYS#5198
Change-Id: I43726c5563c9c31389600ef0ff6855add5af3a03
---
M tests/handover/handover_tests.ok
A tests/handover/test_amr_tch_h_to_f_rxqual_oscillation.ho_vty
2 files changed, 30 insertions(+), 0 deletions(-)

Approvals:
  Jenkins Builder: Verified
  laforge: Looks good to me, but someone else must approve
  pespin: Looks good to me, but someone else must approve
  dexter: Looks good to me, but someone else must approve
  neels: Looks good to me, approved



diff --git a/tests/handover/handover_tests.ok b/tests/handover/handover_tests.ok
index 7de70e1..b76c032 100644
--- a/tests/handover/handover_tests.ok
+++ b/tests/handover/handover_tests.ok
@@ -12,6 +12,7 @@
 pass test_amr_tch_h_to_f_rxlev_oscillation.ho_vty
 pass test_amr_tch_h_to_f_rxqual.ho_vty
 pass test_amr_tch_h_to_f_rxqual_congested.ho_vty
+pass test_amr_tch_h_to_f_rxqual_oscillation.ho_vty
 pass test_balance_congestion.ho_vty
 pass test_balance_congestion_2.ho_vty
 pass test_balance_congestion_by_percentage.ho_vty
diff --git a/tests/handover/test_amr_tch_h_to_f_rxqual_oscillation.ho_vty b/tests/handover/test_amr_tch_h_to_f_rxqual_oscillation.ho_vty
new file mode 100644
index 0000000..a98e917
--- /dev/null
+++ b/tests/handover/test_amr_tch_h_to_f_rxqual_oscillation.ho_vty
@@ -0,0 +1,29 @@
+# Low RxQual causes upgrade of TCH/H to TCH/F.
+# That leads to congestion of TCH/F, but do not handover back to non-congested TCH/H.
+
+network
+ handover2 afs-bias rxlev 0
+ handover2 min rxqual 5
+ handover2 window rxqual averaging 1
+ handover2 min-free-slots tch/f 3
+ handover2 min-free-slots tch/h 4
+
+create-bts trx-count 1 timeslots c+s4 TCH/F TCH/F TCH/F TCH/H  TCH/H TCH/H PDCH
+set-ts-use trx 0 0 states        *    -     -     -     TCH/H- -     -     *
+meas-rep lchan 0 0 4 0 rxlev 30 rxqual 6 ta 0
+# average rxlev is now -110 + 23 = -87 < -80: reassign to TCH/F due to bad rxlev
+expect-as from lchan 0 0 4 0 to lchan 0 0 1 0
+expect-ts-use trx 0 0 states * TCH/F - - - - - *
+
+meas-rep lchan 0 0 1 0 rxlev 30 rxqual 6 ta 0
+congestion-check
+# FAIL: should stay on TCH/F because rxqual is low, do not oscillate between TCH/F and /H.
+expect-as from lchan 0 0 1 0 to lchan 0 0 4 0
+expect-ts-use trx 0 0 states * - - - TCH/H- - - *
+meas-rep lchan 0 0 4 0 rxlev 30 rxqual 6 ta 0
+expect-as from lchan 0 0 4 0 to lchan 0 0 1 0
+expect-ts-use trx 0 0 states * TCH/F - - - - - *
+meas-rep lchan 0 0 1 0 rxlev 30 rxqual 6 ta 0
+congestion-check
+expect-as from lchan 0 0 1 0 to lchan 0 0 4 0
+expect-ts-use trx 0 0 states * - - - TCH/H- - - *

-- 
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/24796
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: I43726c5563c9c31389600ef0ff6855add5af3a03
Gerrit-Change-Number: 24796
Gerrit-PatchSet: 3
Gerrit-Owner: neels <nhofmeyr at sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: dexter <pmaier at sysmocom.de>
Gerrit-Reviewer: laforge <laforge at osmocom.org>
Gerrit-Reviewer: neels <nhofmeyr at sysmocom.de>
Gerrit-Reviewer: pespin <pespin at sysmocom.de>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20210630/a413b703/attachment.htm>


More information about the gerrit-log mailing list