Change in libosmocore[master]: gprs_ns2_vty: dump_nsvc: change output depending on NSVCI

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

lynxis lazus gerrit-no-reply at lists.osmocom.org
Tue Jul 6 09:50:23 UTC 2021 

lynxis lazus has submitted this change. ( https://gerrit.osmocom.org/c/libosmocore/+/24686 )

Change subject: gprs_ns2_vty: dump_nsvc: change output depending on NSVCI
......................................................................

gprs_ns2_vty: dump_nsvc: change output depending on NSVCI

If the NSVCI is valid, there is no signalling or data weight defined (internally this is 1).
For NSVC with NSVCI don't print the signalling or data weight.
For NSVC without NSVCI, don't print NSVCI at all.

Related: OS#5180
Change-Id: Iaadc806a9136436468e2b02eb0bc1f4570a10ecc
---
M src/gb/gprs_ns2_vty.c
M tests/gb/gprs_ns2_vty.vty
2 files changed, 17 insertions(+), 18 deletions(-)

Approvals:
  daniel: Looks good to me, approved
  pespin: Looks good to me, but someone else must approve
  Jenkins Builder: Verified



diff --git a/src/gb/gprs_ns2_vty.c b/src/gb/gprs_ns2_vty.c
index 2f540c2..0aa7902 100644
--- a/src/gb/gprs_ns2_vty.c
+++ b/src/gb/gprs_ns2_vty.c
@@ -1873,18 +1873,17 @@
 /* non-config commands */
 void ns2_vty_dump_nsvc(struct vty *vty, struct gprs_ns2_vc *nsvc, bool stats)
 {
-	char nsvci_str[32];
-
 	if (nsvc->nsvci_is_valid)
-		snprintf(nsvci_str, sizeof(nsvci_str), "%05u", nsvc->nsvci);
+		vty_out(vty, "   NSVCI %05u: %s %s %s%s", nsvc->nsvci,
+			osmo_fsm_inst_state_name(nsvc->fi),
+			nsvc->persistent ? "PERSIST" : "DYNAMIC",
+			gprs_ns2_ll_str(nsvc), VTY_NEWLINE);
 	else
-		snprintf(nsvci_str, sizeof(nsvci_str), "none");
-
-	vty_out(vty, "   NSVCI %s: %s %s data_weight=%u sig_weight=%u %s%s", nsvci_str,
-		osmo_fsm_inst_state_name(nsvc->fi),
-		nsvc->persistent ? "PERSIST" : "DYNAMIC",
-		nsvc->data_weight, nsvc->sig_weight,
-		gprs_ns2_ll_str(nsvc), VTY_NEWLINE);
+		vty_out(vty, "   %s %s sig_weight=%u data_weight=%u %s%s",
+			osmo_fsm_inst_state_name(nsvc->fi),
+			nsvc->persistent ? "PERSIST" : "DYNAMIC",
+			nsvc->sig_weight, nsvc->data_weight,
+			gprs_ns2_ll_str(nsvc), VTY_NEWLINE);
 
 	if (stats) {
 		vty_out_rate_ctr_group(vty, "    ", nsvc->ctrg);
diff --git a/tests/gb/gprs_ns2_vty.vty b/tests/gb/gprs_ns2_vty.vty
index 458e2c8..45c8a16 100644
--- a/tests/gb/gprs_ns2_vty.vty
+++ b/tests/gb/gprs_ns2_vty.vty
@@ -40,11 +40,11 @@
 OsmoNSdummy# show ns
 NSEI 01234: UDP, DEAD
   1 NS-VC:
-   NSVCI none: RECOVERING PERSIST data_weight=1 sig_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
+   RECOVERING PERSIST sig_weight=1 data_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
 UDP bind: 127.0.0.14:42999 DSCP: 0 Priority: 0
   IP-SNS signalling weight: 1 data weight: 1
   1 NS-VC:
-   NSVCI none: RECOVERING PERSIST data_weight=1 sig_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
+   RECOVERING PERSIST sig_weight=1 data_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
 OsmoNSdummy# configure terminal
 OsmoNSdummy(config)# ns
 OsmoNSdummy(config-ns)# nse 1234
@@ -54,15 +54,15 @@
 OsmoNSdummy# show ns
 NSEI 01234: UDP, DEAD
   3 NS-VC:
-   NSVCI none: RECOVERING PERSIST data_weight=1 sig_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
-   NSVCI none: RECOVERING PERSIST data_weight=9 sig_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.16]:9496
-   NSVCI none: RECOVERING PERSIST data_weight=0 sig_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.17]:9496
+   RECOVERING PERSIST sig_weight=1 data_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
+   RECOVERING PERSIST sig_weight=0 data_weight=9 udp)[127.0.0.14]:42999<>[127.0.0.16]:9496
+   RECOVERING PERSIST sig_weight=0 data_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.17]:9496
 UDP bind: 127.0.0.14:42999 DSCP: 0 Priority: 0
   IP-SNS signalling weight: 1 data weight: 1
   3 NS-VC:
-   NSVCI none: RECOVERING PERSIST data_weight=1 sig_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
-   NSVCI none: RECOVERING PERSIST data_weight=9 sig_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.16]:9496
-   NSVCI none: RECOVERING PERSIST data_weight=0 sig_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.17]:9496
+   RECOVERING PERSIST sig_weight=1 data_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
+   RECOVERING PERSIST sig_weight=0 data_weight=9 udp)[127.0.0.14]:42999<>[127.0.0.16]:9496
+   RECOVERING PERSIST sig_weight=0 data_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.17]:9496
 OsmoNSdummy# configure terminal
 OsmoNSdummy(config)# ns
 OsmoNSdummy(config-ns)# nse 1234

-- 
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/24686
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: Iaadc806a9136436468e2b02eb0bc1f4570a10ecc
Gerrit-Change-Number: 24686
Gerrit-PatchSet: 4
Gerrit-Owner: lynxis lazus <lynxis at fe80.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann at sysmocom.de>
Gerrit-Reviewer: dexter <pmaier at sysmocom.de>
Gerrit-Reviewer: lynxis lazus <lynxis at fe80.eu>
Gerrit-Reviewer: pespin <pespin at sysmocom.de>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20210706/9735c6e5/attachment.htm>

More information about the gerrit-log mailing list