This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
lynxis lazus gerrit-no-reply at lists.osmocom.orglynxis lazus has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/22505 ) Change subject: sgsn: change configuration to the new NS2 ...................................................................... sgsn: change configuration to the new NS2 Change the whole vty configuration for NS to be more flexible and support more setups. Old configurations are invalid. For further information see: https://osmocom.org/projects/libosmocore/wiki/Network_service_(NS) Depends-on: Ie9306ab4d4738c2c57a69987086e22771b30657e (osmo-sgsn) Change-Id: I65fb4e52d22617cf8488d8ab77c970f84995560d --- M osmo-sgsn-master/osmo-sgsn.cfg M ttcn3-sgsn-test/jenkins.sh M ttcn3-sgsn-test/osmo-sgsn.cfg A ttcn3-sgsn-test/osmo-sgsn.latest.cfg 4 files changed, 110 insertions(+), 8 deletions(-) Approvals: lynxis lazus: Verified daniel: Looks good to me, approved diff --git a/osmo-sgsn-master/osmo-sgsn.cfg b/osmo-sgsn-master/osmo-sgsn.cfg index b39a83e..3daf9b3 100644 --- a/osmo-sgsn-master/osmo-sgsn.cfg +++ b/osmo-sgsn-master/osmo-sgsn.cfg @@ -18,7 +18,6 @@ timer tns-test 30 timer tns-alive 3 timer tns-alive-retries 10 - encapsulation udp local-ip 127.0.0.1 - encapsulation udp local-port 23000 - encapsulation framerelay-gre enabled 0 + bind udp local + listen 127.0.0.1 23000 bssgp diff --git a/ttcn3-sgsn-test/jenkins.sh b/ttcn3-sgsn-test/jenkins.sh index 5d55093..623f468 100755 --- a/ttcn3-sgsn-test/jenkins.sh +++ b/ttcn3-sgsn-test/jenkins.sh @@ -19,10 +19,12 @@ mkdir $VOL_BASE_DIR/stp cp osmo-stp.cfg $VOL_BASE_DIR/stp/ -# Disable IPv6 until libosmo-sccp.git release > 1.3.0 is available if [ "$IMAGE_SUFFIX" = "latest" ]; then + # Disable IPv6 until libosmo-sccp.git release > 1.3.0 is available sed "/fd02:db8/d" -i $VOL_BASE_DIR/stp/osmo-stp.cfg - sed "/fd02:db8/d" -i $VOL_BASE_DIR/sgsn/osmo-sgsn.cfg + + # latest doesn't use yet the NS2 code + cp osmo-sgsn.latest.cfg "$VOL_BASE_DIR/sgsn/osmo-sgsn.cfg" fi mkdir $VOL_BASE_DIR/unix diff --git a/ttcn3-sgsn-test/osmo-sgsn.cfg b/ttcn3-sgsn-test/osmo-sgsn.cfg index e571315..b587fa8 100644 --- a/ttcn3-sgsn-test/osmo-sgsn.cfg +++ b/ttcn3-sgsn-test/osmo-sgsn.cfg @@ -71,9 +71,9 @@ timer tns-test 30 timer tns-alive 3 timer tns-alive-retries 10 - encapsulation udp local-ip 172.18.8.10 - encapsulation udp local-port 23000 - encapsulation framerelay-gre enabled 0 + bind udp local + listen 172.18.8.10 23000 + accept-ipaccess bssgp sgsn gtp local-ip 172.18.8.10 diff --git a/ttcn3-sgsn-test/osmo-sgsn.latest.cfg b/ttcn3-sgsn-test/osmo-sgsn.latest.cfg new file mode 100644 index 0000000..5cee7d4 --- /dev/null +++ b/ttcn3-sgsn-test/osmo-sgsn.latest.cfg @@ -0,0 +1,101 @@ +! +! OsmoSGSN (1.2.0.46-e77e-dirty) configuration saved from vty +!! +! +log gsmtap 172.18.8.103 + logging level set-all debug + logging filter all 1 +! +log stderr + logging filter all 1 + logging color 1 + logging print category 1 + logging timestamp 1 + logging print extended-timestamp 1 + logging print file 1 + logging level all everything + logging level mm debug + logging level pag notice + logging level meas notice + logging level ref notice + logging level gprs debug + logging level ns info + logging level bssgp info + logging level llc debug + logging level sndcp debug + logging level slhc notice + logging level ranap info + logging level sua info + logging level v42bis info + logging level lglobal info + logging level llapd notice + logging level linp notice + logging level lmux notice + logging level lmi notice + logging level lmib notice + logging level lsms notice + logging level lctrl notice + logging level lgtp debug + logging level lstats notice + logging level lgsup debug + logging level loap notice + logging level lss7 notice + logging level lsccp info + logging level lsua notice + logging level lm3ua notice + logging level lmgcp notice +! +stats interval 5 +! +line vty + no login + bind 0.0.0.0 +ctrl + bind 0.0.0.0 +! +cs7 instance 0 + point-code 0.23.4 + asp asp-clnt-OsmoSGSN-A 2905 0 m3ua + local-ip 172.18.8.10 + remote-ip 172.18.8.200 + as as-clnt-OsmoSGSN-A m3ua + asp asp-clnt-OsmoSGSN-A + routing-key 3 0.23.4 +ns + timer tns-block 3 + timer tns-block-retries 3 + timer tns-reset 3 + timer tns-reset-retries 3 + timer tns-test 30 + timer tns-alive 3 + timer tns-alive-retries 10 + encapsulation udp local-ip 172.18.8.10 + encapsulation udp local-port 23000 + encapsulation framerelay-gre enabled 0 +bssgp +sgsn + gtp local-ip 172.18.8.10 + ggsn 0 remote-ip 172.18.8.103 + ggsn 0 gtp-version 1 + gsup remote-ip 172.18.8.103 + gsup remote-port 4222 + auth-policy remote + gsup oap-id 0 + ! apn * ggsn 0 + no cdr filename + no cdr trap + cdr interval 600 + timer t3312 600 + timer t3322 6 + timer t3350 6 + timer t3360 6 + timer t3370 6 + timer t3313 30 + timer t3314 44 + timer t3316 44 + timer t3385 8 + timer t3386 8 + timer t3395 8 + timer t3397 8 + no compression rfc1144 + no compression v42bis -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/22505 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I65fb4e52d22617cf8488d8ab77c970f84995560d Gerrit-Change-Number: 22505 Gerrit-PatchSet: 5 Gerrit-Owner: lynxis lazus <lynxis at fe80.eu> Gerrit-Reviewer: daniel <dwillmann at sysmocom.de> Gerrit-Reviewer: laforge <laforge at osmocom.org> Gerrit-Reviewer: lynxis lazus <lynxis at fe80.eu> Gerrit-MessageType: merged -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20210128/e9f714f3/attachment.htm>