This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
laforge gerrit-no-reply at lists.osmocom.orglaforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/simtrace2/+/26478 )
Change subject: Bump version: 0.7.0.166-61b4-dirty → 0.8.0
......................................................................
Bump version: 0.7.0.166-61b4-dirty → 0.8.0
Change-Id: I1650f7181cf514ba00e6f70e8133ee88780ebf41
---
M debian/changelog
M debian/control
R debian/libosmo-simtrace2-1.install
M host/lib/Makefile.am
4 files changed, 203 insertions(+), 6 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/78/26478/1
diff --git a/debian/changelog b/debian/changelog
index ccebd49..38fdd6b 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,8 +1,205 @@
-simtrace2 (0.5.2) UNRELEASED; urgency=medium
+simtrace2 (0.8.0) unstable; urgency=medium
+ [ Harald Welte ]
* adapt to host tools in autotools
+ * simtrace2_api: Remove dead code
+ * fix baudrate of 'make log'
+ * qmod DFU: Don't overwrite memory beyond end of usb_strings[]
+ * usb_strings.txt: s/SIMtrace Phone/SIMtrace Card Emulation/
+ * Patch actual board name into the USB iProduct string descriptor
+ * Build only 'reasonable' combinations of APP/MEMORY
+ * stdio: Add support for %p format string (pointer address)
+ * Fix format string related warnings (int vs. long)
+ * Add missing CR to achieve CRLF at end of log lines
+ * more comments in host_communication.c.
+ * usb_buf: count number of elements in queue
+ * usb_buf: Limit the maximum queue length to 3 elements
+ * qmod: Don't print EEPROM operations in help when not supported
+ * cosmetic: board_qmod: Annotate #endif with comments
+ * qmod: Document '!' and '@' commands on UART
+ * implement minimalistic talloc_report(); add 't' command on UART
+ * update copyright statement
+ * cardem: Fix memory leak on unsupported SIMTRACE_MSGT_DT_CEMU_CARDINSERT
+ * usb_buf: Actually limit queue to 3 elements, not 4
+ * USBD_HAL: Don't disable UDP peripheral clock on suspend
+ * usb_buf: Properly initialize buffered_endpoint->ep number
+ * pseudo_talloc: Increment number of buffers from 10 to 20
+ * card_emu: Factor out card_handle_reset() from card_emu_init()
+ * cardem: Move card_emu_io_statechg() calls out of interrupt context
+ * cardem: RST resets all state (including release of buffers)
+ * host_communication: Send zero-length-packet on wMaxPacketSize
+ * card_emu: Initialize PTSS state every time we start PTS
+ * card_emu: Avoid recursive calls to card_set_state()
+ * card_emu: Always print state names in string representation
+ * card_emu: Remove extraneous code
+ * card_emu: Remove extraneous initialization of ch->pts.state
+ * cardem: Make card_emu_report_status() optionally use IRQ endpoint
+ * cardem: Add SIMTRACE_MSGT_BD_CEMU_CONFIG
+ * cardem: Implement support for CEMU_FEAT_F_STATUS_IRQ
+ * simtrace2-sniff: Reformat value_string to pass our validation scripts
+ * firmware: Reformat value_string to pass our validation scripts
+ * jenkins.sh: Add verify_value_string_arrays_are_terminated.py
+ * [lib] apdu_dispatch: Use DLGLOBAL and don't printf() directly
+ * [lib] apdu_dispatch: Don't print APDU state to stdout
+ * OSMO_ASSERT() on double-free or invalid pointer
+ * Update .gitignore file for host
+ * migrate to libosmousb
+ * library: Add osmo_st2_compatible_dev_idsp[]
+ * firmware: move printing of welcome banner to common function print_banner()
+ * firmware: apps/cardem/main.c: Synchronize with apps/trace/main.c
+ * host: Add COPYING file for host software (GPLv2)
+ * host/lib/gsmtap.c: Add GPLv2 disclaimer
+ * increase ringbuffer size from 512 to 1024 bytes
+ * simtrace2_api: Add osmo_st2_cardem_request_config()
+ * Disable interrupts during EEFC_ReadUniqueID()
+ * cardem: Fix infinite loop + watchdog reset on long OUT message
+ * extend osmo_st2_cardem_inst with fields required by osmo-remsim
+ * cosmetic: Add missing CR to LF in dispatch_received_usb_msg()
+ * USBD.c: Don't reset EP0 on SetConfiguration(0)
+ * pio_it.c: Permit repeated calls to PIO_ConfigureIt()
+ * simtrace2_siff: getopt_long() returns int, not char
+ * Introduce support for asynchronous USB transmission
+ * firmware: fix builds with gcc stack smashing protection enabled
+ * dfu: Shrink code by 144 bytes (by not calling PIO_InitializeInterrupts)
+ * dfu: Save another 60 bytes by changing the way we print horizontal lines
+ * migrate from BSC_FD_* to OSMO_FD_*
+ * remove usb2udp
+ * rename simtrace2-remsim to simtrace2-cardem-pcsc
+ * Update README
+ * remove old pre-autoconf makefile
+ * simtrace2-cardem-pcsc: Make it work again
+ * Revert "add ISO 7816-3 library to remsim project"
+ * Revert "add library providing ISO 7816-3 utilities"
+ * card_emu: waiting_time is stored in etu, not clocks.
+ * card_emu: Rename fi to Fi and di to Di
+ * card_emu: Clarify and differentiate F/Fi/F_index/Fi_index
+ * iso7816_fidi: Add iso7816_3_ prefix to symbols; fix terminology
+ * card_emu: improve reset detection conditions
+ * card_emu: explicitly initialize PTS and TPDU states
+ * card_emu: Use USART timeout for waiting time
+ * card_emu: Fix USART timer, particularly in re-start situations
+ * card_emu: Fix computation of waiting time
+ * contrib/jenkins.sh: Switch from rita -> ftp.osmocom.org
+ * st2-cardem-pcsc: Fix goto-in-while mess
+ * st2-cardem-pcsc: Use ATR of real card by default
+ * simtrace board.h: Enable HAVE_CARDEM if we build the cardem firmware
+ * jenkins.sh: build 'cardem' firmware also for simtrace board
+ * Revert "cardem: disable upload for simtrace2"
+ * simtrace2-cardem-pcsc: Decode STATUS flags to strings
+ * simtrace2-cardem-pcsc: Reset the real card if reader resets cardem
+ * assert: Use printf_sync() to ensure printing of assert / panic
+ * Add usb product ID of sysmoOCTSIMTEST
+ * octsimtest: remove lots of unused #defines
+ * octsimtest: most code for support of this new board
+ * octsimtest: Switch direction of I/O level shifter depending on uart tx / rx
+ * cardem-pcsc: initialize libosmocore logging
+ * octsimtest: Adjust VCC voltage thresholds (resistive VCC divider)
+ * contrib/jenkins.sh: Build 'cardem' app for 'octsimtest' board
+ * firmware: octsimtest: Fix IO_DIR pin definition
+ * firmware: octsimtest: Make slot mux configurable via USB
+ * firmware: octsimtest: mcp23017 initializaiton
+ * firmware: cardem: re-factor CARDINSERT command processing
+ * firmware: octsimtest: Support SIMTRACE_MSGT_DT_CEMU_CARDINSERT
+ * firmware: octsimtest: use TRACE_* macros instead of direct printf
+ * firmware: octsimtest: Fix disabling the card_insert signal
+ * firmware: octsimtest: Add i/I command for setting card-insert via I2C GPIO
+ * firmware: octsimtest: ensure all card_insert GPIO are 0 after reset
+ * don't printf() directly from library code, go via libosmocore logging
+ * simtrace2-list: Use osmo_st2_compatible_dev_ids[]
+ * board_gpio.gnumeric: Add ngff-cardem pin-out
+ * 99-simtrace2.rules: Add OCTSIMTEST
+ * contrib/flash.py: Add OCTSIMTEST support
+ * Introduce simtrace2-tool
+ * introduce support for new ngff_cardem board
+ * simtrace2.spec: Add simtrace2-tool binary to package
+ * contrib/jenkins.sh: Build APP=cardem for BOARD=ngff_cardem
+ * jenkins.sh: Build 'trace' firmware for ngff_cardem
+ * Use osmo_libusb_{init,exit}() instead of libusb_{init,exit}()
+ * simtrace2-cardem-pcsc: Remove double libusb initialization
+ * simtrace2-tool: Initialize logging to avoid error on first log output
+ * cardem-pcsc: Fix return of uninitialized variable
+ * host: Upgrade libosmocore dependency to 1.4.0
- -- Harald Welte <lafore at gnumonks.org> Thu, 28 Nov 2019 00:44:57 +0100
+ [ Kévin Redon ]
+ * minor: fix spacing
+ * minor: updated copyright years
+ * dfu: minor: make debug output only verbose in info level
+ * minor: move USB debug output from info to debug level
+ * minor: improve debug output
+ * minor : fix typo in comment
+ * better detect VCC and nRST changes on simtrace2 board
+ * minor: ignore usbstring binary
+ * simtrace2-remsim: Use simplest ATR
+ * cardem: use simplest ATR as default ATR
+ * minor: fix typo
+ * DFU: increase USB reset duration to 50 ms
+ * DFU: restart bootloader when USB conf failed
+ * Makefile: add linker option showing memory usage
+ * improve shared bootloader/application memory
+ * minor: improve trace output
+ * DFU: add DFU application
+ * add script to flash latest firmware
+ * minor: use same LED pattern for cardem as other applications
+ * cardem: currently simtrace does not support cardem
+ * add library providing ISO 7816-3 utilities
+ * add ISO 7816-3 library to remsim project
+ * rename PIN_PHONE_{CLK,IO} to PIN_USIM1_{CLK,IO}
+ * minor add comments
+ * make sim switch board specific
+
+ [ Eric Wild ]
+ * remsim: allow selecting pcsc reader number
+ * cardem: disable upload for simtrace2
+ * firmware: do not allow undefined symbols
+ * firmware: allow verbose builds
+ * cardem: choose a more reasonable default ATR
+ * contrib: add a basic simtrace lua dissector for wireshark
+ * cardem: free the buf
+ * cardemu: support 1v8 for the tester
+ * firmware: data sections
+ * firmware: proper makefile deps
+ * firmware: make the ngff beakout blink
+ * simtrace2-cardem: use local sim on exit
+ * contrib: more cardem dissection
+ * firmware: trace for ngff
+ * cardem: fix spurious NULL bytes during transfers
+ * contrib/jenkins.sh: build ngff_Cardem dfu bootloader
+ * contrib: allow manually forcing bulk simtrace dissection
+ * contrib/jenkins.sh: lower trace to make bl fit
+ * Revert "firmware: data sections"
+ * add the ngff cardem to default build targets
+ * drop unused exidx sections when linking
+ * clang build support
+ * fix bootloader led config crash
+ * firmware: add bootloader update "app"
+ * firmware: remove usb pullup that dates back to simtrace1
+ * firmware: increase reset delay before usb reattach
+ * firmware: drop cref printing
+ * add our default clang-format file
+ * firmware: add missing usb strings to blupdate that prevented building it
+ * jenkins: build bootloader updater
+ * firmware: remove dfu-dfu default target
+
+ [ Oliver Smith ]
+ * contrib: import RPM spec
+ * contrib: integrate RPM spec
+ * d/source/format: new file
+ * firmware/Makefile: fix UNKNOWN in OBS packages
+ * host: use git-version-gen/tarball-v. from topdir
+ * gitignore: add firmware/apps/*/usb_strings.txt.patched
+ * firmware: create duplicate files for upload only
+ * contrib/prepare_upload.sh: fix cd problems
+ * firmware: qmod-dfu: disable stack protector
+ * firmware: disable stack protector by default
+ * gitreview: new file
+
+ [ Leonard Hübner ]
+ * remsim: adding cli argument to set the atr
+
+ [ Eric ]
+ * dfu: let the device reset itself
+
+ -- Harald Welte <laforge at osmocom.org> Thu, 09 Dec 2021 08:12:56 +0100
simtrace2 (0.5.1) unstable; urgency=medium
diff --git a/debian/control b/debian/control
index 16e6af5..612e2ca 100644
--- a/debian/control
+++ b/debian/control
@@ -33,11 +33,11 @@
Section: devel
Architecture: any
Multi-Arch: same
-Depends: ${shlibs:Depends}, ${misc:Depends}, libosmo-simtrace2-0
+Depends: ${shlibs:Depends}, ${misc:Depends}, libosmo-simtrace2-1
Recommends: simtrace2-firmware
Description: Host utilities to communicate with SIMtrace2 USB Devices.
-Package: libosmo-simtrace2-0
+Package: libosmo-simtrace2-1
Section: libs
Architecture: any
Multi-Arch: same
@@ -52,7 +52,7 @@
Section: libdevel
Architecture: any
Multi-Arch: same
-Depends: libosmo-simtrace2-0, ${misc:Depends}
+Depends: libosmo-simtrace2-1, ${misc:Depends}
Description: Development headers for Osmocom SIMtrace2 library
This library contains core "driver" functionality to interface with the
Osmocom SIMtrace2 (and compatible) USB device firmware. It enables
diff --git a/debian/libosmo-simtrace2-0.install b/debian/libosmo-simtrace2-1.install
similarity index 100%
rename from debian/libosmo-simtrace2-0.install
rename to debian/libosmo-simtrace2-1.install
diff --git a/host/lib/Makefile.am b/host/lib/Makefile.am
index 3f7ec8e..e134c75 100644
--- a/host/lib/Makefile.am
+++ b/host/lib/Makefile.am
@@ -1,7 +1,7 @@
# This is _NOT_ the library release version, it's an API version.
# Please read chapter "Library interface versions" of the libtool documentation
# before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html
-ST2_LIBVERSION=0:0:0
+ST2_LIBVERSION=1:0:0
AM_CPPFLAGS = $(all_includes) -I$(top_srcdir)/include -I$(top_builddir)
AM_CFLAGS= -Wall $(LIBOSMOCORE_CFLAGS) $(LIBOSMOSIM_CFLAGS) $(LIBUSB_CFLAGS) $(COVERAGE_CFLAGS)
--
To view, visit https://gerrit.osmocom.org/c/simtrace2/+/26478
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: simtrace2
Gerrit-Branch: master
Gerrit-Change-Id: I1650f7181cf514ba00e6f70e8133ee88780ebf41
Gerrit-Change-Number: 26478
Gerrit-PatchSet: 1
Gerrit-Owner: laforge <laforge at osmocom.org>
Gerrit-Reviewer: osmith <osmith at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20211209/54f7793a/attachment.htm>