This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
neels gerrit-no-reply at lists.osmocom.orgneels has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bsc/+/21193 )
Change subject: handover_test prep: rename 'create-bts' to 'create-n-bts'
......................................................................
handover_test prep: rename 'create-bts' to 'create-n-bts'
I will add a command to create a single BTS with arbitrary timeslot
configurations.
To limit amount of editing of the current tests, keep the current 'create-bts'
command, which creates N identically configured BTS, but rename it to
'create-n-bts'.
Thus allow the upcoming single-BTS command to take the name 'create-bts'.
Change-Id: I4853771cf23b509b7f278d04c57883332ede786d
---
M tests/handover/handover_test.c
1 file changed, 31 insertions(+), 31 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/93/21193/1
diff --git a/tests/handover/handover_test.c b/tests/handover/handover_test.c
index fefeb0c..3ceaf31 100644
--- a/tests/handover/handover_test.c
+++ b/tests/handover/handover_test.c
@@ -508,7 +508,7 @@
"There are many neighbor cells, but only the current cell is the best\n"
"cell, so no handover is performed\n",
- "create-bts", "7",
+ "create-n-bts", "7",
"create-ms", "0", "TCH/F", "AMR",
"meas-rep", "0", "30","0",
"6","0","20","1","21","2","18","3","20","4","23","5","19",
@@ -522,7 +522,7 @@
"Handover to best better cell\n\n"
"The best neighbor cell is selected\n",
- "create-bts", "7",
+ "create-n-bts", "7",
"create-ms", "0", "TCH/F", "AMR",
"meas-rep", "0", "10","0",
"6","0","20","1","21","2","18","3","20","4","23","5","19",
@@ -545,7 +545,7 @@
"in the current cell, but disabling in the neighbor cell, handover\n"
"will not be performed, until it is enabled in the neighbor cell too.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"afs-rxlev-improve", "0", "5",
"create-ms", "0", "TCH/H", "AMR",
"as-enable", "0", "0",
@@ -579,7 +579,7 @@
"Even though the cell is still better, handover will not be performed\n"
"due to penalty timer after handover failure\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"meas-rep", "0", "20","0", "1","0","30",
"expect-chan", "1", "1",
@@ -599,7 +599,7 @@
"at TCH/H slots. As the congestion is removed, the handover takes\n"
"place.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"set-min-free", "1", "TCH/H", "4",
"create-ms", "0", "TCH/H", "HR",
"meas-rep", "0", "20","0", "1","0","30",
@@ -621,7 +621,7 @@
"at TCH/F slots. As the congestion is removed, the handover takes\n"
"place.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"set-min-free", "1", "TCH/F", "4",
"create-ms", "0", "TCH/F", "FR",
"meas-rep", "0", "20","0", "1","0","30",
@@ -643,7 +643,7 @@
"at TCH/F slots. As the congestion is removed, the handover takes\n"
"place.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"set-min-free", "1", "TCH/F", "4",
"create-ms", "0", "TCH/F", "EFR",
"meas-rep", "0", "20","0", "1","0","30",
@@ -664,7 +664,7 @@
"The MS is using AMR V3 codec, the better cell is congested at TCH/F\n"
"slots. The handover is performed to non-congested TCH/H slots.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"set-min-free", "1", "TCH/F", "4",
"create-ms", "0", "TCH/F", "AMR",
"meas-rep", "0", "20","0", "1","0","30",
@@ -681,7 +681,7 @@
"No handover to a cell with no slots available\n\n"
"If no slot is available, no handover is performed\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"create-ms", "1", "TCH/F", "AMR",
"create-ms", "1", "TCH/F", "AMR",
@@ -703,7 +703,7 @@
"There are tree mobiles that want to handover, but only two can do\n"
"it at a time, because the maximum number is limited to two.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"set-max-ho", "1", "2",
"create-ms", "0", "TCH/F", "AMR",
"create-ms", "0", "TCH/F", "AMR",
@@ -724,7 +724,7 @@
"If neighbor cell is better, handover is only performed if the\n"
"amount of improvement is greater or equal hyteresis\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"meas-rep", "0", "27","0", "1","0","30",
"expect-no-chan",
@@ -748,7 +748,7 @@
"is below minimum RX level, even if the better neighbor cell (minimum\n"
"RX level reached) does not meet the hysteresis.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"meas-rep", "0", "10","0", "1","0","11",
"expect-no-chan",
@@ -769,7 +769,7 @@
"The better neighbor cell is congested, so no handover is performed.\n"
"After the congestion is over, handover will be performed.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"set-min-free", "1", "TCH/F", "4",
"set-min-free", "1", "TCH/H", "4",
@@ -794,7 +794,7 @@
"more. After congestion raises in the current cell, the handover is\n"
"performed to balance congestion\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"set-min-free", "0", "TCH/F", "4",
"set-min-free", "0", "TCH/H", "4",
@@ -819,7 +819,7 @@
"If the RX level of the current cell drops below minimum acceptable\n"
"level, the handover is performed.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"set-min-free", "1", "TCH/F", "4",
"set-min-free", "1", "TCH/H", "4",
@@ -846,7 +846,7 @@
* See Performance Enhancements in a Frequency Hopping GSM Network (Nielsen Wigard 2002), Chapter
* 2.1.1, "Interference" in the list of triggers on p.157. */
- "create-bts", "2",
+ "create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"meas-rep", "0", "40","6", "1","0","30",
"expect-no-chan",
@@ -884,7 +884,7 @@
"performed back to that cell, because the penalty timer (due to\n"
"maximum allowed timing advance) is running.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"set-max-ta", "0", "5", /* of cell */
"set-ta", "0", "5", /* of ms */
@@ -908,7 +908,7 @@
"Three cells have different number of used slots, but there is no\n"
"congestion in any of these cells. No handover is performed.\n",
- "create-bts", "3",
+ "create-n-bts", "3",
"set-min-free", "0", "TCH/F", "2",
"set-min-free", "0", "TCH/H", "2",
"set-min-free", "1", "TCH/F", "2",
@@ -946,7 +946,7 @@
"congestion at TCH/F in the first cell. Handover is performed with\n"
"the best candidate.\n",
- "create-bts", "3",
+ "create-n-bts", "3",
"set-min-free", "0", "TCH/F", "2",
"set-min-free", "0", "TCH/H", "2",
"set-min-free", "1", "TCH/F", "2",
@@ -989,7 +989,7 @@
"Two cells are congested, but the second cell is less congested.\n"
"Handover is performed to solve the congestion.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"set-min-free", "0", "TCH/F", "4",
"set-min-free", "1", "TCH/F", "4",
"create-ms", "0", "TCH/F", "FR",
@@ -1018,7 +1018,7 @@
"Congestion check: Solving congestion by handover TCH/F -> TCH/H\n\n"
"Two BTS, one MS in the first congested BTS must handover to\n"
"non-congested TCH/H of second BTS, in order to solve congestion\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"set-min-free", "0", "TCH/F", "4",
"set-min-free", "0", "TCH/H", "4",
"set-min-free", "1", "TCH/F", "4",
@@ -1039,7 +1039,7 @@
"Congestion check: Balancing congestion by handover TCH/F -> TCH/H\n\n"
"Two BTS, one MS in the first congested BTS must handover to\n"
"less-congested TCH/H of second BTS, in order to balance congestion\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"set-min-free", "0", "TCH/F", "4",
"set-min-free", "0", "TCH/H", "4",
"set-min-free", "1", "TCH/F", "4",
@@ -1065,7 +1065,7 @@
"assignment is performed to less-congested TCH/F, the candidate with\n"
"the worst RX level is chosen.\n",
- "create-bts", "1",
+ "create-n-bts", "1",
"set-min-free", "0", "TCH/F", "4",
"set-min-free", "0", "TCH/H", "4",
"create-ms", "0", "TCH/H", "AMR",
@@ -1088,7 +1088,7 @@
"Story: 'A neighbor is your friend'\n",
- "create-bts", "3",
+ "create-n-bts", "3",
"print",
"Andreas is driving along the coast, on a sunny june afternoon.\n"
@@ -1174,7 +1174,7 @@
"received.\n",
/* two cells, first in congested, but no handover */
- "create-bts", "2",
+ "create-n-bts", "2",
"set-min-free", "0", "TCH/F", "4",
"set-min-free", "0", "TCH/H", "4",
"create-ms", "0", "TCH/F", "AMR",
@@ -1216,7 +1216,7 @@
"There are many neighbor cells, but only the current cell is the best\n"
"cell, so no handover is performed\n",
- "create-bts", "7",
+ "create-n-bts", "7",
"create-ms", "0", "TCH/F", "AMR",
"meas-rep", "0", "30","0",
"6","0","20","1","21","2","18","3","20","4","23","5","19",
@@ -1230,7 +1230,7 @@
"Handover to best better cell\n\n"
"The best neighbor cell is selected\n",
- "create-bts", "7",
+ "create-n-bts", "7",
"create-ms", "0", "TCH/F", "AMR",
"meas-rep", "0", "10","0",
"6","0","20","1","21","2","18","3","20","4","23","5","19",
@@ -1250,7 +1250,7 @@
"the worst RX level is chosen. (So far like test 22.)\n"
"After that, trigger more congestion checks to ensure stability.\n",
- "create-bts", "1",
+ "create-n-bts", "1",
"set-min-free", "0", "TCH/F", "2",
"set-min-free", "0", "TCH/H", "4",
"create-ms", "0", "TCH/H", "AMR",
@@ -1286,7 +1286,7 @@
"level, the handover is performed. It is also required that 10\n"
"resports are received, before RX quality is checked.\n",
- "create-bts", "2",
+ "create-n-bts", "2",
"create-ms", "0", "TCH/F", "AMR",
"set-min-free", "1", "TCH/F", "4",
"set-min-free", "1", "TCH/H", "4",
@@ -1322,7 +1322,7 @@
"Congestion check: Balancing congestion by handover TCH/F -> TCH/H\n\n"
"One BTS, and TCH/F are considered congested, TCH/H are not.\n"
,
- "create-bts", "1",
+ "create-n-bts", "1",
"set-min-free", "0", "TCH/F", "3",
"set-min-free", "0", "TCH/H", "0",
"create-ms", "0", "TCH/F", "AMR",
@@ -1523,7 +1523,7 @@
hodec2_init(bsc_gsmnet);
while (*test_case) {
- if (!strcmp(*test_case, "create-bts")) {
+ if (!strcmp(*test_case, "create-n-bts")) {
int n = atoi(test_case[1]);
fprintf(stderr, "- Creating %d BTS (one TRX each, "
"TS(1-4) are TCH/F, TS(5-6) are TCH/H)\n", n);
--
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/21193
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: I4853771cf23b509b7f278d04c57883332ede786d
Gerrit-Change-Number: 21193
Gerrit-PatchSet: 1
Gerrit-Owner: neels <nhofmeyr at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20201117/0406a6f3/attachment.htm>