This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
laforge gerrit-no-reply at lists.osmocom.orglaforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-trx/+/20966 ) Change subject: doc/manuals: generate XML VTY reference at build-time ...................................................................... doc/manuals: generate XML VTY reference at build-time Unfortunately, we cannot re-use the existing Makefile rules from: $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc because they do not allow to generate the list of $(DOCBOOKS) from a template, and require the project to store everything in separate folders with specific names. Also, those rules expect that the target PDFs contain only a single word in their names (for example, 'osmoapp-vty-reference', not 'osmo-app-vty-reference'), while in a project with multiple similarly named targets this would reduce readability (imagine 'osmotrxuhd-vty-reference'). Change-Id: I798ea3b7417b8ca3e9c7d50911158c5413526237 Depends: I6aac73d998c5937894233631e654a160d5623198 Related: SYS#4937, SYS#4910 --- M .gitignore M Makefile.am M doc/manuals/Makefile.am A doc/manuals/vty/Makefile.vty-reference.inc R doc/manuals/vty/osmotrx-vty-reference.xml D doc/manuals/vty/trx_vty_reference.xml 6 files changed, 70 insertions(+), 1,413 deletions(-) Approvals: laforge: Looks good to me, approved pespin: Looks good to me, but someone else must approve Jenkins Builder: Verified diff --git a/.gitignore b/.gitignore index 4baa72a..43fdfc2 100644 --- a/.gitignore +++ b/.gitignore @@ -64,6 +64,9 @@ doc/manuals/*__*.png doc/manuals/*.check doc/manuals/generated/ +doc/manuals/vty/osmotrx-*-vty-reference.xml +doc/manuals/vty/osmotrx-*-vty-reference.xml.inc.gen +doc/manuals/vty/osmotrx-*-vty-reference.xml.inc.merged doc/manuals/osmomsc-usermanual.xml doc/manuals/common doc/manuals/build diff --git a/Makefile.am b/Makefile.am index 0152341..6a3a955 100644 --- a/Makefile.am +++ b/Makefile.am @@ -28,13 +28,14 @@ # Order must be preserved SUBDIRS = \ - doc \ CommonLibs \ GSM \ Transceiver52M \ contrib \ tests \ - utils + utils \ + doc \ + $(NULL) EXTRA_DIST = \ LEGAL \ diff --git a/doc/manuals/Makefile.am b/doc/manuals/Makefile.am index 7bf1f58..ed7353d 100644 --- a/doc/manuals/Makefile.am +++ b/doc/manuals/Makefile.am @@ -1,6 +1,5 @@ EXTRA_DIST = osmotrx-usermanual.adoc \ osmotrx-usermanual-docinfo.xml \ - osmotrx-vty-reference.xml \ chapters \ vty @@ -9,8 +8,24 @@ ASCIIDOC_DEPS = $(srcdir)/chapters/*.adoc include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.asciidoc.inc - VTY_REFERENCE = osmotrx-vty-reference.xml - include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc + VARIANTS = $(NULL) + +if DEVICE_UHD + VARIANTS += uhd +endif +if DEVICE_USRP1 + VARIANTS += usrp1 +endif +if DEVICE_LMS + VARIANTS += lms +endif +if DEVICE_IPC + VARIANTS += ipc +endif + + # This is a significantly modified, multi-target adopted copy of + # $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc + include $(srcdir)/vty/Makefile.vty-reference.inc OSMO_REPOSITORY = osmo-trx include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc diff --git a/doc/manuals/vty/Makefile.vty-reference.inc b/doc/manuals/vty/Makefile.vty-reference.inc new file mode 100644 index 0000000..d86f638 --- /dev/null +++ b/doc/manuals/vty/Makefile.vty-reference.inc @@ -0,0 +1,37 @@ +DOCBOOKS = $(foreach v,$(VARIANTS),vty/osmotrx-$(v)-vty-reference.xml) +DOCBOOKS_DEPS = $(DOCBOOKS) $(addsuffix .inc,$(DOCBOOKS)) +INC_DIR = $(abspath $(builddir)/vty) + +include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.docbook.inc + +CLEAN_FILES += $(DOCBOOKS_DEPS) +CLEAN_FILES += $(addsuffix .inc.gen,$(DOCBOOKS)) +CLEAN_FILES += $(addsuffix .inc.merged,$(DOCBOOKS)) + +$(INC_DIR): + mkdir -p $@ + +vty/osmotrx-%-vty-reference.xml: $(top_builddir)/Transceiver52M/osmo-trx-% $(INC_DIR) + sed -e "s|@@GENERATED@@|$@.inc|" \ + -e "s|@@VARIANT@@|$(notdir $<)|" \ + -e "s|@@REV_NUMBER@@|$(VERSION)|" \ + -e "s|@@REV_DATE@@|$(shell date +"%dth %B %Y")|" \ + -e "s|@@CR_YEAR@@|$(shell date +"%Y")|" \ + $(srcdir)/vty/osmotrx-vty-reference.xml > $@ + +vty/osmotrx-%-vty-reference.xml.inc: $(top_builddir)/Transceiver52M/osmo-trx-% \ + $(OSMO_GSM_MANUALS_DIR)/common/vty_additions.xml \ + $(OSMO_GSM_MANUALS_DIR)/common/chapters/vty.xml \ + $(OSMO_GSM_MANUALS_DIR)/vty_reference.xsl \ + $(srcdir)/vty/*.xml $(INC_DIR) + # a) Invoke osmo-trx-% to generate the list of commands first + $< --vty-ref-mode default --vty-ref-xml > "$@.gen" + # ... filter garbage potentially printed by libraries to stdout + sed -i '/^<vtydoc/,$$!d' "$@.gen" + # b) Merge the result of a) with global and local additions + $(OSMO_GSM_MANUALS_DIR)/build/vty_reference_combine.sh \ + $(realpath $(OSMO_GSM_MANUALS_DIR)/merge_doc.xsl) "$@.gen" \ + $(OSMO_GSM_MANUALS_DIR)/common/vty_additions.xml \ + $(srcdir)/vty/*additions*.xml > "$@.merged" + # c) Convert the result of b) into a valid docbook + xsltproc $(OSMO_GSM_MANUALS_DIR)/vty_reference.xsl "$@.merged" > $@ diff --git a/doc/manuals/osmotrx-vty-reference.xml b/doc/manuals/vty/osmotrx-vty-reference.xml similarity index 70% rename from doc/manuals/osmotrx-vty-reference.xml rename to doc/manuals/vty/osmotrx-vty-reference.xml index 4291929..4d2a23d 100644 --- a/doc/manuals/osmotrx-vty-reference.xml +++ b/doc/manuals/vty/osmotrx-vty-reference.xml @@ -6,7 +6,7 @@ <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN" "http://docbook.org/xml/5.0/dtd/docbook.dtd" [ <!ENTITY chapter-vty SYSTEM "./common/chapters/vty.xml" > -<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" > +<!ENTITY sections-vty SYSTEM "@@GENERATED@@" > ]> <book> @@ -18,12 +18,19 @@ <authorinitials>pe</authorinitials> <revremark>Initial</revremark> </revision> + <revision> + <revnumber>v2</revnumber> + <date>@@REV_DATE@@</date> + <authorinitials>s.f.m.c.</authorinitials> + <revremark>Automatic build (@@REV_NUMBER@@)</revremark> + </revision> </revhistory> <title>OsmoTRX VTY Reference</title> + <subtitle>@@VARIANT@@</subtitle> <copyright> - <year>2018</year> + <year>@@CR_YEAR@@</year> </copyright> <legalnotice> diff --git a/doc/manuals/vty/trx_vty_reference.xml b/doc/manuals/vty/trx_vty_reference.xml deleted file mode 100644 index ff44078..0000000 --- a/doc/manuals/vty/trx_vty_reference.xml +++ /dev/null @@ -1,1406 +0,0 @@ -<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> - <node id='_common_cmds_'> - <name>Common Commands</name> - <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description> - <command id='help'> - <params> - <param name='help' doc='Description of the interactive help system' /> - </params> - </command> - <command id='list'> - <params> - <param name='list' doc='Print command list' /> - </params> - </command> - <command id='write terminal'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='terminal' doc='Write to terminal' /> - </params> - </command> - <command id='write file [PATH]'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='file' doc='Write to configuration file' /> - <param name='[PATH]' doc='Set file path to store the config, or replace if already exists' /> - </params> - </command> - <command id='write memory'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='memory' doc='Write configuration to the file (same as write file)' /> - </params> - </command> - <command id='write'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - </params> - </command> - <command id='show running-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='running-config' doc='running configuration' /> - </params> - </command> - <command id='exit'> - <params> - <param name='exit' doc='Exit current mode and down to previous mode' /> - </params> - </command> - <command id='end'> - <params> - <param name='end' doc='End current mode and change to enable mode.' /> - </params> - </command> - </node> - <node id='view'> - <name>view</name> - <command id='show version'> - <params> - <param name='show' doc='Show running system information' /> - <param name='version' doc='Displays program version' /> - </params> - </command> - <command id='show online-help'> - <params> - <param name='show' doc='Show running system information' /> - <param name='online-help' doc='Online help' /> - </params> - </command> - <command id='enable'> - <params> - <param name='enable' doc='Turn on privileged mode command' /> - </params> - </command> - <command id='terminal length <0-512>'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='length' doc='Set number of lines on a screen' /> - <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> - </params> - </command> - <command id='terminal no length'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='length' doc='Set number of lines on a screen' /> - </params> - </command> - <command id='who'> - <params> - <param name='who' doc='Display who is on vty' /> - </params> - </command> - <command id='show history'> - <params> - <param name='show' doc='Show running system information' /> - <param name='history' doc='Display the session command history' /> - </params> - </command> - <command id='logging enable'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='enable' doc='Enables logging to this vty' /> - </params> - </command> - <command id='logging disable'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='disable' doc='Disables logging to this vty' /> - </params> - </command> - <command id='logging filter all (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='filter' doc='Filter log messages' /> - <param name='all' doc='Do you want to log all messages?' /> - <param name='0' doc='Only print messages matched by other filters' /> - <param name='1' doc='Bypass filter and print all messages' /> - </params> - </command> - <command id='logging color (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='color' doc='Configure color-printing for log messages' /> - <param name='0' doc='Don't use color for printing messages' /> - <param name='1' doc='Use color for printing messages' /> - </params> - </command> - <command id='logging timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp' /> - </params> - </command> - <command id='logging print extended-timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='extended-timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> - </params> - </command> - <command id='logging print category (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem name' /> - </params> - </command> - <command id='logging print category-hex (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category-hex' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> - </params> - </command> - <command id='logging print level (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='level' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the log level name' /> - </params> - </command> - <command id='logging print file (0|1|basename) [last]'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='file' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the source file and line' /> - <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> - <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> - </params> - </command> - <command id='logging set-log-mask MASK'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='set-log-mask' doc='Set the logmask of this logging target' /> - <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> - </params> - </command> - <command id='logging level (main|trxclk|trxctrl|trxddl|trxdul|dev|devdrv|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='main' doc='Main generic category' /> - <param name='trxclk' doc='TRX Master Clock' /> - <param name='trxctrl' doc='TRX CTRL interface' /> - <param name='trxddl' doc='TRX Data interface Downlink' /> - <param name='trxdul' doc='TRX CTRL interface Uplink' /> - <param name='dev' doc='Device/Driver specific code' /> - <param name='devdrv' doc='Logging from external device driver library implementing lower level specifics' /> - <param name='lglobal' doc='Library-internal global log family' /> - <param name='llapd' doc='LAPD in libosmogsm' /> - <param name='linp' doc='A-bis Intput Subsystem' /> - <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> - <param name='lmi' doc='A-bis Input Driver for Signalling' /> - <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> - <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> - <param name='lctrl' doc='Control Interface' /> - <param name='lgtp' doc='GPRS GTP library' /> - <param name='lstats' doc='Statistics messages and logging' /> - <param name='lgsup' doc='Generic Subscriber Update Protocol' /> - <param name='loap' doc='Osmocom Authentication Protocol' /> - <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> - <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> - <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> - <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> - <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> - <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='lrspro' doc='Remote SIM protocol' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level set-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level force-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='no logging level force-all'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> - </params> - </command> - <command id='logp (main|trxclk|trxctrl|trxddl|trxdul|dev|devdrv|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'> - <params> - <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' /> - <param name='main' doc='Main generic category' /> - <param name='trxclk' doc='TRX Master Clock' /> - <param name='trxctrl' doc='TRX CTRL interface' /> - <param name='trxddl' doc='TRX Data interface Downlink' /> - <param name='trxdul' doc='TRX CTRL interface Uplink' /> - <param name='dev' doc='Device/Driver specific code' /> - <param name='devdrv' doc='Logging from external device driver library implementing lower level specifics' /> - <param name='lglobal' doc='Library-internal global log family' /> - <param name='llapd' doc='LAPD in libosmogsm' /> - <param name='linp' doc='A-bis Intput Subsystem' /> - <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> - <param name='lmi' doc='A-bis Input Driver for Signalling' /> - <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> - <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> - <param name='lctrl' doc='Control Interface' /> - <param name='lgtp' doc='GPRS GTP library' /> - <param name='lstats' doc='Statistics messages and logging' /> - <param name='lgsup' doc='Generic Subscriber Update Protocol' /> - <param name='loap' doc='Osmocom Authentication Protocol' /> - <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> - <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> - <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> - <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> - <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> - <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='lrspro' doc='Remote SIM protocol' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' /> - </params> - </command> - <command id='show logging vty'> - <params> - <param name='show' doc='Show running system information' /> - <param name='logging' doc='Show current logging configuration' /> - <param name='vty' doc='Show current logging configuration for this vty' /> - </params> - </command> - <command id='show alarms'> - <params> - <param name='show' doc='Show running system information' /> - <param name='alarms' doc='Show current logging configuration' /> - </params> - </command> - <command id='show trx'> - <params> - <param name='show' doc='Show running system information' /> - <param name='trx' doc='Display information on the TRX' /> - </params> - </command> - <command id='show talloc-context (application|all) (full|brief|DEPTH)'> - <params> - <param name='show' doc='Show running system information' /> - <param name='talloc-context' doc='Show talloc memory hierarchy' /> - <param name='application' doc='Application's context' /> - <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> - <param name='full' doc='Display a full talloc memory hierarchy' /> - <param name='brief' doc='Display a brief talloc memory hierarchy' /> - <param name='DEPTH' doc='Specify required maximal depth value' /> - </params> - </command> - <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'> - <params> - <param name='show' doc='Show running system information' /> - <param name='talloc-context' doc='Show talloc memory hierarchy' /> - <param name='application' doc='Application's context' /> - <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> - <param name='full' doc='Display a full talloc memory hierarchy' /> - <param name='brief' doc='Display a brief talloc memory hierarchy' /> - <param name='DEPTH' doc='Specify required maximal depth value' /> - <param name='tree' doc='Display only a specific memory chunk' /> - <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' /> - </params> - </command> - <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'> - <params> - <param name='show' doc='Show running system information' /> - <param name='talloc-context' doc='Show talloc memory hierarchy' /> - <param name='application' doc='Application's context' /> - <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> - <param name='full' doc='Display a full talloc memory hierarchy' /> - <param name='brief' doc='Display a brief talloc memory hierarchy' /> - <param name='DEPTH' doc='Specify required maximal depth value' /> - <param name='filter' doc='Filter chunks using regular expression' /> - <param name='REGEXP' doc='Regular expression' /> - </params> - </command> - <command id='show stats'> - <params> - <param name='show' doc='Show running system information' /> - <param name='stats' doc='Show statistical values' /> - </params> - </command> - <command id='show stats level (global|peer|subscriber)'> - <params> - <param name='show' doc='Show running system information' /> - <param name='stats' doc='Show statistical values' /> - <param name='level' doc='Set the maximum group level' /> - <param name='global' doc='Show global groups only' /> - <param name='peer' doc='Show global and network peer related groups' /> - <param name='subscriber' doc='Show global, peer, and subscriber groups' /> - </params> - </command> - <command id='show asciidoc counters'> - <params> - <param name='show' doc='Show running system information' /> - <param name='asciidoc' doc='Asciidoc generation' /> - <param name='counters' doc='Generate table of all registered counters' /> - </params> - </command> - <command id='show rate-counters'> - <params> - <param name='show' doc='Show running system information' /> - <param name='rate-counters' doc='Show all rate counters' /> - </params> - </command> - </node> - <node id='enable'> - <name>enable</name> - <command id='disable'> - <params> - <param name='disable' doc='Turn off privileged mode command' /> - </params> - </command> - <command id='configure terminal'> - <params> - <param name='configure' doc='Configuration from vty interface' /> - <param name='terminal' doc='Configuration terminal' /> - </params> - </command> - <command id='copy running-config startup-config'> - <params> - <param name='copy' doc='Copy configuration' /> - <param name='running-config' doc='Copy running config to... ' /> - <param name='startup-config' doc='Copy running config to startup config (same as write file)' /> - </params> - </command> - <command id='show startup-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='startup-config' doc='Contentes of startup configuration' /> - </params> - </command> - <command id='show version'> - <params> - <param name='show' doc='Show running system information' /> - <param name='version' doc='Displays program version' /> - </params> - </command> - <command id='show online-help'> - <params> - <param name='show' doc='Show running system information' /> - <param name='online-help' doc='Online help' /> - </params> - </command> - <command id='terminal length <0-512>'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='length' doc='Set number of lines on a screen' /> - <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> - </params> - </command> - <command id='terminal no length'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='length' doc='Set number of lines on a screen' /> - </params> - </command> - <command id='who'> - <params> - <param name='who' doc='Display who is on vty' /> - </params> - </command> - <command id='show history'> - <params> - <param name='show' doc='Show running system information' /> - <param name='history' doc='Display the session command history' /> - </params> - </command> - <command id='terminal monitor'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='monitor' doc='Copy debug output to the current terminal line' /> - </params> - </command> - <command id='terminal no monitor'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='monitor' doc='Copy debug output to the current terminal line' /> - </params> - </command> - <command id='logging enable'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='enable' doc='Enables logging to this vty' /> - </params> - </command> - <command id='logging disable'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='disable' doc='Disables logging to this vty' /> - </params> - </command> - <command id='logging filter all (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='filter' doc='Filter log messages' /> - <param name='all' doc='Do you want to log all messages?' /> - <param name='0' doc='Only print messages matched by other filters' /> - <param name='1' doc='Bypass filter and print all messages' /> - </params> - </command> - <command id='logging color (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='color' doc='Configure color-printing for log messages' /> - <param name='0' doc='Don't use color for printing messages' /> - <param name='1' doc='Use color for printing messages' /> - </params> - </command> - <command id='logging timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp' /> - </params> - </command> - <command id='logging print extended-timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='extended-timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> - </params> - </command> - <command id='logging print category (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem name' /> - </params> - </command> - <command id='logging print category-hex (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category-hex' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> - </params> - </command> - <command id='logging print level (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='level' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the log level name' /> - </params> - </command> - <command id='logging print file (0|1|basename) [last]'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='file' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the source file and line' /> - <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> - <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> - </params> - </command> - <command id='logging set-log-mask MASK'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='set-log-mask' doc='Set the logmask of this logging target' /> - <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> - </params> - </command> - <command id='logging level (main|trxclk|trxctrl|trxddl|trxdul|dev|devdrv|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='main' doc='Main generic category' /> - <param name='trxclk' doc='TRX Master Clock' /> - <param name='trxctrl' doc='TRX CTRL interface' /> - <param name='trxddl' doc='TRX Data interface Downlink' /> - <param name='trxdul' doc='TRX CTRL interface Uplink' /> - <param name='dev' doc='Device/Driver specific code' /> - <param name='devdrv' doc='Logging from external device driver library implementing lower level specifics' /> - <param name='lglobal' doc='Library-internal global log family' /> - <param name='llapd' doc='LAPD in libosmogsm' /> - <param name='linp' doc='A-bis Intput Subsystem' /> - <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> - <param name='lmi' doc='A-bis Input Driver for Signalling' /> - <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> - <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> - <param name='lctrl' doc='Control Interface' /> - <param name='lgtp' doc='GPRS GTP library' /> - <param name='lstats' doc='Statistics messages and logging' /> - <param name='lgsup' doc='Generic Subscriber Update Protocol' /> - <param name='loap' doc='Osmocom Authentication Protocol' /> - <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> - <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> - <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> - <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> - <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> - <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='lrspro' doc='Remote SIM protocol' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level set-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level force-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='no logging level force-all'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> - </params> - </command> - <command id='logp (main|trxclk|trxctrl|trxddl|trxdul|dev|devdrv|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'> - <params> - <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' /> - <param name='main' doc='Main generic category' /> - <param name='trxclk' doc='TRX Master Clock' /> - <param name='trxctrl' doc='TRX CTRL interface' /> - <param name='trxddl' doc='TRX Data interface Downlink' /> - <param name='trxdul' doc='TRX CTRL interface Uplink' /> - <param name='dev' doc='Device/Driver specific code' /> - <param name='devdrv' doc='Logging from external device driver library implementing lower level specifics' /> - <param name='lglobal' doc='Library-internal global log family' /> - <param name='llapd' doc='LAPD in libosmogsm' /> - <param name='linp' doc='A-bis Intput Subsystem' /> - <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> - <param name='lmi' doc='A-bis Input Driver for Signalling' /> - <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> - <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> - <param name='lctrl' doc='Control Interface' /> - <param name='lgtp' doc='GPRS GTP library' /> - <param name='lstats' doc='Statistics messages and logging' /> - <param name='lgsup' doc='Generic Subscriber Update Protocol' /> - <param name='loap' doc='Osmocom Authentication Protocol' /> - <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> - <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> - <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> - <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> - <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> - <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='lrspro' doc='Remote SIM protocol' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' /> - </params> - </command> - <command id='show logging vty'> - <params> - <param name='show' doc='Show running system information' /> - <param name='logging' doc='Show current logging configuration' /> - <param name='vty' doc='Show current logging configuration for this vty' /> - </params> - </command> - <command id='show alarms'> - <params> - <param name='show' doc='Show running system information' /> - <param name='alarms' doc='Show current logging configuration' /> - </params> - </command> - <command id='show trx'> - <params> - <param name='show' doc='Show running system information' /> - <param name='trx' doc='Display information on the TRX' /> - </params> - </command> - <command id='show talloc-context (application|all) (full|brief|DEPTH)'> - <params> - <param name='show' doc='Show running system information' /> - <param name='talloc-context' doc='Show talloc memory hierarchy' /> - <param name='application' doc='Application's context' /> - <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> - <param name='full' doc='Display a full talloc memory hierarchy' /> - <param name='brief' doc='Display a brief talloc memory hierarchy' /> - <param name='DEPTH' doc='Specify required maximal depth value' /> - </params> - </command> - <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'> - <params> - <param name='show' doc='Show running system information' /> - <param name='talloc-context' doc='Show talloc memory hierarchy' /> - <param name='application' doc='Application's context' /> - <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> - <param name='full' doc='Display a full talloc memory hierarchy' /> - <param name='brief' doc='Display a brief talloc memory hierarchy' /> - <param name='DEPTH' doc='Specify required maximal depth value' /> - <param name='tree' doc='Display only a specific memory chunk' /> - <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' /> - </params> - </command> - <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'> - <params> - <param name='show' doc='Show running system information' /> - <param name='talloc-context' doc='Show talloc memory hierarchy' /> - <param name='application' doc='Application's context' /> - <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> - <param name='full' doc='Display a full talloc memory hierarchy' /> - <param name='brief' doc='Display a brief talloc memory hierarchy' /> - <param name='DEPTH' doc='Specify required maximal depth value' /> - <param name='filter' doc='Filter chunks using regular expression' /> - <param name='REGEXP' doc='Regular expression' /> - </params> - </command> - <command id='show stats'> - <params> - <param name='show' doc='Show running system information' /> - <param name='stats' doc='Show statistical values' /> - </params> - </command> - <command id='show stats level (global|peer|subscriber)'> - <params> - <param name='show' doc='Show running system information' /> - <param name='stats' doc='Show statistical values' /> - <param name='level' doc='Set the maximum group level' /> - <param name='global' doc='Show global groups only' /> - <param name='peer' doc='Show global and network peer related groups' /> - <param name='subscriber' doc='Show global, peer, and subscriber groups' /> - </params> - </command> - <command id='show asciidoc counters'> - <params> - <param name='show' doc='Show running system information' /> - <param name='asciidoc' doc='Asciidoc generation' /> - <param name='counters' doc='Generate table of all registered counters' /> - </params> - </command> - <command id='show rate-counters'> - <params> - <param name='show' doc='Show running system information' /> - <param name='rate-counters' doc='Show all rate counters' /> - </params> - </command> - </node> - <node id='config'> - <name>config</name> - <command id='hostname WORD'> - <params> - <param name='hostname' doc='Set system's network name' /> - <param name='WORD' doc='This system's network name' /> - </params> - </command> - <command id='no hostname [HOSTNAME]'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='hostname' doc='Reset system's network name' /> - <param name='[HOSTNAME]' doc='Host name of this router' /> - </params> - </command> - <command id='password (8|) WORD'> - <params> - <param name='password' doc='Assign the terminal connection password' /> - <param name='8' doc='Specifies a HIDDEN password will follow' /> - <param name='' doc='dummy string ' /> - <param name='WORD' doc='The HIDDEN line password string' /> - </params> - </command> - <command id='password LINE'> - <params> - <param name='password' doc='Assign the terminal connection password' /> - <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> - </params> - </command> - <command id='enable password (8|) WORD'> - <params> - <param name='enable' doc='Modify enable password parameters' /> - <param name='password' doc='Assign the privileged level password' /> - <param name='8' doc='Specifies a HIDDEN password will follow' /> - <param name='' doc='dummy string ' /> - <param name='WORD' doc='The HIDDEN 'enable' password string' /> - </params> - </command> - <command id='enable password LINE'> - <params> - <param name='enable' doc='Modify enable password parameters' /> - <param name='password' doc='Assign the privileged level password' /> - <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> - </params> - </command> - <command id='no enable password'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='enable' doc='Modify enable password parameters' /> - <param name='password' doc='Assign the privileged level password' /> - </params> - </command> - <command id='banner motd default'> - <params> - <param name='banner' doc='Set banner string' /> - <param name='motd' doc='Strings for motd' /> - <param name='default' doc='Default string' /> - </params> - </command> - <command id='banner motd file [FILE]'> - <params> - <param name='banner' doc='Set banner' /> - <param name='motd' doc='Banner for motd' /> - <param name='file' doc='Banner from a file' /> - <param name='[FILE]' doc='Filename' /> - </params> - </command> - <command id='no banner motd'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='banner' doc='Set banner string' /> - <param name='motd' doc='Strings for motd' /> - </params> - </command> - <command id='service terminal-length <0-512>'> - <params> - <param name='service' doc='Set up miscellaneous service' /> - <param name='terminal-length' doc='System wide terminal length configuration' /> - <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> - </params> - </command> - <command id='no service terminal-length [<0-512>]'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='service' doc='Set up miscellaneous service' /> - <param name='terminal-length' doc='System wide terminal length configuration' /> - <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> - </params> - </command> - <command id='line vty'> - <params> - <param name='line' doc='Configure a terminal line' /> - <param name='vty' doc='Virtual terminal' /> - </params> - </command> - <command id='service advanced-vty'> - <params> - <param name='service' doc='Set up miscellaneous service' /> - <param name='advanced-vty' doc='Enable advanced mode vty interface' /> - </params> - </command> - <command id='no service advanced-vty'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='service' doc='Set up miscellaneous service' /> - <param name='advanced-vty' doc='Enable advanced mode vty interface' /> - </params> - </command> - <command id='show history'> - <params> - <param name='show' doc='Show running system information' /> - <param name='history' doc='Display the session command history' /> - </params> - </command> - <command id='log stderr'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='stderr' doc='Logging via STDERR of the process' /> - </params> - </command> - <command id='no log stderr'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='log' doc='Configure logging sub-system' /> - <param name='stderr' doc='Logging via STDERR of the process' /> - </params> - </command> - <command id='log file .FILENAME'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='file' doc='Logging to text file' /> - <param name='.FILENAME' doc='Filename' /> - </params> - </command> - <command id='no log file .FILENAME'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='log' doc='Configure logging sub-system' /> - <param name='file' doc='Logging to text file' /> - <param name='.FILENAME' doc='Filename' /> - </params> - </command> - <command id='log alarms <2-32700>'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='alarms' doc='Logging alarms to osmo_strrb' /> - <param name='<2-32700>' doc='Maximum number of messages to log' /> - </params> - </command> - <command id='no log alarms'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='log' doc='Configure logging sub-system' /> - <param name='alarms' doc='Logging alarms to osmo_strrb' /> - </params> - </command> - <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='syslog' doc='Logging via syslog' /> - <param name='authpriv' doc='Security/authorization messages facility' /> - <param name='cron' doc='Clock daemon (cron/at) facility' /> - <param name='daemon' doc='General system daemon facility' /> - <param name='ftp' doc='Ftp daemon facility' /> - <param name='lpr' doc='Line printer facility' /> - <param name='mail' doc='Mail facility' /> - <param name='news' doc='News facility' /> - <param name='user' doc='Generic facility' /> - <param name='uucp' doc='UUCP facility' /> - </params> - </command> - <command id='log syslog local <0-7>'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='syslog' doc='Logging via syslog' /> - <param name='local' doc='Syslog LOCAL facility' /> - <param name='<0-7>' doc='Local facility number' /> - </params> - </command> - <command id='no log syslog'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='log' doc='Configure logging sub-system' /> - <param name='syslog' doc='Logging via syslog' /> - </params> - </command> - <command id='log gsmtap [HOSTNAME]'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='gsmtap' doc='Logging via GSMTAP' /> - <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' /> - </params> - </command> - <command id='ctrl'> - <params> - <param name='ctrl' doc='Configure the Control Interface' /> - </params> - </command> - <command id='trx'> - <params> - <param name='trx' doc='Configure the TRX' /> - </params> - </command> - <command id='stats reporter statsd'> - <params> - <param name='stats' doc='Configure stats sub-system' /> - <param name='reporter' doc='Configure a stats reporter' /> - <param name='statsd' doc='Report to a STATSD server' /> - </params> - </command> - <command id='no stats reporter statsd'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='stats' doc='Configure stats sub-system' /> - <param name='reporter' doc='Configure a stats reporter' /> - <param name='statsd' doc='Report to a STATSD server' /> - </params> - </command> - <command id='stats reporter log'> - <params> - <param name='stats' doc='Configure stats sub-system' /> - <param name='reporter' doc='Configure a stats reporter' /> - <param name='log' doc='Report to the logger' /> - </params> - </command> - <command id='no stats reporter log'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='stats' doc='Configure stats sub-system' /> - <param name='reporter' doc='Configure a stats reporter' /> - <param name='log' doc='Report to the logger' /> - </params> - </command> - <command id='stats interval <1-65535>'> - <params> - <param name='stats' doc='Configure stats sub-system' /> - <param name='interval' doc='Set the reporting interval' /> - <param name='<1-65535>' doc='Interval in seconds' /> - </params> - </command> - </node> - <node id='config-log'> - <name>config-log</name> - <command id='logging filter all (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='filter' doc='Filter log messages' /> - <param name='all' doc='Do you want to log all messages?' /> - <param name='0' doc='Only print messages matched by other filters' /> - <param name='1' doc='Bypass filter and print all messages' /> - </params> - </command> - <command id='logging color (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='color' doc='Configure color-printing for log messages' /> - <param name='0' doc='Don't use color for printing messages' /> - <param name='1' doc='Use color for printing messages' /> - </params> - </command> - <command id='logging timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp' /> - </params> - </command> - <command id='logging print extended-timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='extended-timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> - </params> - </command> - <command id='logging print category (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem name' /> - </params> - </command> - <command id='logging print category-hex (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category-hex' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> - </params> - </command> - <command id='logging print level (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='level' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the log level name' /> - </params> - </command> - <command id='logging print file (0|1|basename) [last]'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='file' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the source file and line' /> - <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> - <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> - </params> - </command> - <command id='logging level (main|trxclk|trxctrl|trxddl|trxdul|dev|devdrv|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='main' doc='Main generic category' /> - <param name='trxclk' doc='TRX Master Clock' /> - <param name='trxctrl' doc='TRX CTRL interface' /> - <param name='trxddl' doc='TRX Data interface Downlink' /> - <param name='trxdul' doc='TRX CTRL interface Uplink' /> - <param name='dev' doc='Device/Driver specific code' /> - <param name='devdrv' doc='Logging from external device driver library implementing lower level specifics' /> - <param name='lglobal' doc='Library-internal global log family' /> - <param name='llapd' doc='LAPD in libosmogsm' /> - <param name='linp' doc='A-bis Intput Subsystem' /> - <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> - <param name='lmi' doc='A-bis Input Driver for Signalling' /> - <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> - <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> - <param name='lctrl' doc='Control Interface' /> - <param name='lgtp' doc='GPRS GTP library' /> - <param name='lstats' doc='Statistics messages and logging' /> - <param name='lgsup' doc='Generic Subscriber Update Protocol' /> - <param name='loap' doc='Osmocom Authentication Protocol' /> - <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> - <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> - <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> - <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> - <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> - <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='lrspro' doc='Remote SIM protocol' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level set-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level force-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='no logging level force-all'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> - </params> - </command> - </node> - <node id='config-stats'> - <name>config-stats</name> - <command id='local-ip ADDR'> - <params> - <param name='local-ip' doc='Set the IP address to which we bind locally' /> - <param name='ADDR' doc='IP Address' /> - </params> - </command> - <command id='no local-ip'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='local-ip' doc='Set the IP address to which we bind locally' /> - </params> - </command> - <command id='remote-ip ADDR'> - <params> - <param name='remote-ip' doc='Set the remote IP address to which we connect' /> - <param name='ADDR' doc='IP Address' /> - </params> - </command> - <command id='remote-port <1-65535>'> - <params> - <param name='remote-port' doc='Set the remote port to which we connect' /> - <param name='<1-65535>' doc='Remote port number' /> - </params> - </command> - <command id='mtu <100-65535>'> - <params> - <param name='mtu' doc='Set the maximum packet size' /> - <param name='<100-65535>' doc='Size in byte' /> - </params> - </command> - <command id='no mtu'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='mtu' doc='Set the maximum packet size' /> - </params> - </command> - <command id='prefix PREFIX'> - <params> - <param name='prefix' doc='Set the item name prefix' /> - <param name='PREFIX' doc='The prefix string' /> - </params> - </command> - <command id='no prefix'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='prefix' doc='Set the item name prefix' /> - </params> - </command> - <command id='level (global|peer|subscriber)'> - <params> - <param name='level' doc='Set the maximum group level' /> - <param name='global' doc='Report global groups only' /> - <param name='peer' doc='Report global and network peer related groups' /> - <param name='subscriber' doc='Report global, peer, and subscriber groups' /> - </params> - </command> - <command id='enable'> - <params> - <param name='enable' doc='Enable the reporter' /> - </params> - </command> - <command id='disable'> - <params> - <param name='disable' doc='Disable the reporter' /> - </params> - </command> - </node> - <node id='config-line'> - <name>config-line</name> - <command id='login'> - <params> - <param name='login' doc='Enable password checking' /> - </params> - </command> - <command id='no login'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='login' doc='Enable password checking' /> - </params> - </command> - <command id='bind A.B.C.D [<0-65535>]'> - <params> - <param name='bind' doc='Accept VTY telnet connections on local interface' /> - <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' /> - <param name='[<0-65535>]' doc='Local TCP port number' /> - </params> - </command> - </node> - <node id='config-ctrl'> - <name>config-ctrl</name> - <command id='bind A.B.C.D'> - <params> - <param name='bind' doc='Set bind address to listen for Control connections' /> - <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' /> - </params> - </command> - </node> - <node id='config-trx'> - <name>config-trx</name> - <command id='bind-ip A.B.C.D'> - <params> - <param name='bind-ip' doc='Set the IP address for the local bind' /> - <param name='A.B.C.D' doc='IPv4 Address' /> - </params> - </command> - <command id='remote-ip A.B.C.D'> - <params> - <param name='remote-ip' doc='Set the IP address for the remote BTS' /> - <param name='A.B.C.D' doc='IPv4 Address' /> - </params> - </command> - <command id='base-port <1-65535>'> - <params> - <param name='base-port' doc='Set the TRX Base Port' /> - <param name='<1-65535>' doc='TRX Base Port' /> - </params> - </command> - <command id='dev-args DESC'> - <params> - <param name='dev-args' doc='Set the device-specific arguments to pass to the device' /> - <param name='DESC' doc='Device-specific arguments' /> - </params> - </command> - <command id='tx-sps (1|4)'> - <params> - <param name='tx-sps' doc='Set the Tx Samples-per-Symbol' /> - <param name='1' doc='Tx Samples-per-Symbol' /> - <param name='4' doc='(null)' /> - </params> - </command> - <command id='rx-sps (1|4)'> - <params> - <param name='rx-sps' doc='Set the Rx Samples-per-Symbol' /> - <param name='1' doc='Rx Samples-per-Symbol' /> - <param name='4' doc='(null)' /> - </params> - </command> - <command id='clock-ref (internal|external|gpsdo)'> - <params> - <param name='clock-ref' doc='Set the Reference Clock' /> - <param name='internal' doc='Enable internal reference (default)' /> - <param name='external' doc='Enable external 10 MHz reference' /> - <param name='gpsdo' doc='Enable GPSDO reference' /> - </params> - </command> - <command id='multi-arfcn (disable|enable)'> - <params> - <param name='multi-arfcn' doc='Enable multi-ARFCN transceiver (default=disable)' /> - <param name='disable' doc='(null)' /> - <param name='enable' doc='(null)' /> - </params> - </command> - <command id='offset FLOAT'> - <params> - <param name='offset' doc='Set the baseband frequency offset (default=0, auto)' /> - <param name='FLOAT' doc='Baseband Frequency Offset' /> - </params> - </command> - <command id='rssi-offset FLOAT'> - <params> - <param name='rssi-offset' doc='Set the RSSI to dBm offset in dB (default=0)' /> - <param name='FLOAT' doc='RSSI to dBm offset in dB' /> - </params> - </command> - <command id='swap-channels (disable|enable)'> - <params> - <param name='swap-channels' doc='Swap channels (default=disable)' /> - <param name='disable' doc='(null)' /> - <param name='enable' doc='(null)' /> - </params> - </command> - <command id='egprs (disable|enable)'> - <params> - <param name='egprs' doc='Enable EDGE receiver (default=disable)' /> - <param name='disable' doc='(null)' /> - <param name='enable' doc='(null)' /> - </params> - </command> - <command id='ext-rach (disable|enable)'> - <params> - <param name='ext-rach' doc='Enable extended (11-bit) RACH (default=disable)' /> - <param name='disable' doc='(null)' /> - <param name='enable' doc='(null)' /> - </params> - </command> - <command id='rt-prio <1-32>'> - <params> - <param name='rt-prio' doc='Set the SCHED_RR real-time priority' /> - <param name='<1-32>' doc='Real time priority' /> - </params> - </command> - <command id='filler type (zero|dummy|random-nb-gmsk|random-nb-8psk|random-ab)'> - <params> - <param name='filler' doc='Filler burst settings' /> - <param name='type' doc='Filler burst type (default=zero)' /> - <param name='zero' doc='Send an empty burst when there is nothing to send (default)' /> - <param name='dummy' doc='Send a dummy burst when there is nothing to send on C0 (TRX0) and empty burst on other channels. Use for OpenBTS compatibility only, don't use with OsmoBTS as it breaks encryption.' /> - <param name='random-nb-gmsk' doc='Send a GMSK modulated Normal Burst with random bits when there is nothing to send. Use for spectrum mask testing. Configure 'filler tsc' to set training sequence.' /> - <param name='random-nb-8psk' doc='Send an 8-PSK modulated Normal Burst with random bits when there is nothing to send. Use for spectrum mask testing. Configure 'filler tsc' to set training sequence.' /> - <param name='random-ab' doc='Send an Access Burst with random bits when there is nothing to send. Use for Rx/Tx alignment. Configure 'filler access-burst-delay' to introduce artificial delay.' /> - </params> - </command> - <command id='filler tsc <0-7>'> - <params> - <param name='filler' doc='Filler burst settings' /> - <param name='tsc' doc='Set the TSC for GMSK/8-PSK Normal Burst random fillers. Used only with 'random-nb-gmsk' and 'random-nb-8psk' filler types. (default=0)' /> - <param name='<0-7>' doc='TSC' /> - </params> - </command> - <command id='filler access-burst-delay <0-68>'> - <params> - <param name='filler' doc='Filler burst settings' /> - <param name='access-burst-delay' doc='Set the delay for Access Burst random fillers. Used only with 'random-ab' filler type. (default=0)' /> - <param name='<0-68>' doc='RACH delay in symbols' /> - </params> - </command> - <command id='ctr-error-threshold (rx_overruns|tx_underruns|rx_drop_events|rx_drop_samples|tx_drop_events|tx_drop_samples) <0-65535> (per-second|per-minute|per-hour|per-day)'> - <params> - <param name='ctr-error-threshold' doc='Threshold rate for error counter' /> - <param name='rx_overruns' doc='Set threshold value for rate_ctr device:rx_overruns' /> - <param name='tx_underruns' doc='Set threshold value for rate_ctr device:tx_underruns' /> - <param name='rx_drop_events' doc='Set threshold value for rate_ctr device:rx_drop_events' /> - <param name='rx_drop_samples' doc='Set threshold value for rate_ctr device:rx_drop_samples' /> - <param name='tx_drop_events' doc='Set threshold value for rate_ctr device:tx_drop_events' /> - <param name='tx_drop_samples' doc='Set threshold value for rate_ctr device:tx_drop_samples' /> - <param name='<0-65535>' doc='Value to set for threshold' /> - <param name='per-second' doc='Threshold value sampled per-second' /> - <param name='per-minute' doc='Threshold value sampled per-minute' /> - <param name='per-hour' doc='Threshold value sampled per-hour' /> - <param name='per-day' doc='Threshold value sampled per-day' /> - </params> - </command> - <command id='no ctr-error-threshold (rx_overruns|tx_underruns|rx_drop_events|rx_drop_samples|tx_drop_events|tx_drop_samples) <0-65535> (per-second|per-minute|per-hour|per-day)'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='ctr-error-threshold' doc='Threshold rate for error counter' /> - <param name='rx_overruns' doc='Set threshold value for rate_ctr device:rx_overruns' /> - <param name='tx_underruns' doc='Set threshold value for rate_ctr device:tx_underruns' /> - <param name='rx_drop_events' doc='Set threshold value for rate_ctr device:rx_drop_events' /> - <param name='rx_drop_samples' doc='Set threshold value for rate_ctr device:rx_drop_samples' /> - <param name='tx_drop_events' doc='Set threshold value for rate_ctr device:tx_drop_events' /> - <param name='tx_drop_samples' doc='Set threshold value for rate_ctr device:tx_drop_samples' /> - <param name='<0-65535>' doc='Value to set for threshold' /> - <param name='per-second' doc='Threshold value sampled per-second' /> - <param name='per-minute' doc='Threshold value sampled per-minute' /> - <param name='per-hour' doc='Threshold value sampled per-hour' /> - <param name='per-day' doc='Threshold value sampled per-day' /> - </params> - </command> - <command id='stack-size <0-2147483647>'> - <params> - <param name='stack-size' doc='Set the stack size per thread in BYTE, 0 = OS default' /> - <param name='<0-2147483647>' doc='Stack size per thread in BYTE' /> - </params> - </command> - <command id='chan <0-100>'> - <params> - <param name='chan' doc='Select a channel to configure' /> - <param name='<0-100>' doc='Channel index' /> - </params> - </command> - </node> - <node id='config-trx-chan'> - <name>config-trx-chan</name> - <command id='rx-path NAME'> - <params> - <param name='rx-path' doc='Set the Rx Path' /> - <param name='NAME' doc='Rx Path name' /> - </params> - </command> - <command id='tx-path NAME'> - <params> - <param name='tx-path' doc='Set the Tx Path' /> - <param name='NAME' doc='Tx Path name' /> - </params> - </command> - </node> -</vtydoc> -- To view, visit https://gerrit.osmocom.org/c/osmo-trx/+/20966 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-trx Gerrit-Branch: master Gerrit-Change-Id: I798ea3b7417b8ca3e9c7d50911158c5413526237 Gerrit-Change-Number: 20966 Gerrit-PatchSet: 7 Gerrit-Owner: fixeria <vyanitskiy at sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge at osmocom.org> Gerrit-Reviewer: pespin <pespin at sysmocom.de> Gerrit-MessageType: merged -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20201104/e0584acb/attachment.htm>