This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
osmith gerrit-no-reply at lists.osmocom.orgosmith has uploaded this change for review. ( https://gerrit.osmocom.org/c/libosmo-sccp/+/18278 ) Change subject: contrib: integrate RPM spec ...................................................................... contrib: integrate RPM spec Remove OpenSUSE bug report link, set version to 0.0.0, make it build with CentOS 8 etc. Do not try to build libsscp, libmtp and libxua as shared libraries. The imported spec file patched the source with "0001-build-fixes.patch" (not imported) and packaged resulting so files. However, these libraries are legacy and built statically on purpose, as it's stated on the wiki page: https://osmocom.org/projects/libosmo-sccp/wiki Related: OS#4550 Change-Id: Id1d77a79b43a9cb967fe3fe10394cca24757af85 --- M contrib/libosmo-sccp.spec 1 file changed, 11 insertions(+), 63 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmo-sccp refs/changes/78/18278/1 diff --git a/contrib/libosmo-sccp.spec b/contrib/libosmo-sccp.spec index 11d661c..f4c0b79 100644 --- a/contrib/libosmo-sccp.spec +++ b/contrib/libosmo-sccp.spec @@ -12,25 +12,23 @@ # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. -# Please submit bugfixes or comments via http://bugs.opensuse.org/ -# - -%define libversion %(echo "%{version}" |sed 's/\\./_/g') Name: libosmo-sccp -Version: 1.2.0.36 +Version: 0.0.0 Release: 0 Summary: Osmocom library for the A-bis interface between BTS and BSC License: AGPL-3.0-or-later AND GPL-2.0-or-later Group: Hardware/Mobile URL: https://projects.osmocom.org/projects/libosmo-sccp -#Git-Clone: git://git.osmocom.org/libosmo-sccp Source: %{name}-%{version}.tar.xz -Patch0: 0001-build-fixes.patch BuildRequires: automake >= 1.6 BuildRequires: libtool >= 2 BuildRequires: lksctp-tools-devel BuildRequires: pkgconfig >= 0.20 +%if 0%{?centos_ver} +BuildRequires: systemd +%else BuildRequires: systemd-rpm-macros +%endif BuildRequires: xz BuildRequires: pkgconfig(libosmo-netif) >= 0.4.0 BuildRequires: pkgconfig(libosmocore) >= 1.0.0 @@ -43,22 +41,10 @@ facilities in Signaling System 7 telecommunications networks. SCCP is heavily used in cellular networks such as GSM. -%package -n libosmo-mtp-%{libversion} -Summary: Osmocom Message Transfer Part library -License: GPL-2.0-or-later -Group: System/Libraries - -%description -n libosmo-mtp-%{libversion} -The Message Transfer Part (MTP) is part of the Signaling System 7 -(SS7) used for communication in Public Switched Telephone Networks. -MTP is responsible for reliable, unduplicated and in-sequence -transport of SS7 messages between communication partners. - %package -n libosmo-mtp-devel Summary: Development files for the Osmocom MTP library License: GPL-2.0-or-later Group: Development/Libraries/C and C++ -Requires: libosmo-mtp-%{libversion} = %{version} %description -n libosmo-mtp-devel MTP is part of SS7 used for communication in Public Switched @@ -67,23 +53,10 @@ This subpackage contains the development files for the Osmocom MTP library. -%package -n libosmo-sccp-%{libversion} -Summary: Osmocom Signalling Connection Control Part library -License: GPL-2.0-or-later -Group: System/Libraries - -%description -n libosmo-sccp-%{libversion} -The Signalling Connection Control Part (SCCP) is a network layer -protocol that provides extended routing, flow control, segmentation, -connection-orientation, and error correction facilities in Signaling -System 7 telecommunications networks. SCCP relies on the services of -MTP for basic routing and error detection. - %package -n libosmo-sccp-devel Summary: Development files for the Osmocom SCCP library License: GPL-2.0-or-later Group: Development/Libraries/C and C++ -Requires: libosmo-sccp-%{libversion} = %{version} %description -n libosmo-sccp-devel SCCP is a network layer protocol that provides routing, flow control, @@ -113,22 +86,11 @@ This subpackage contains the development files for the Osmocom SIGTRAN library. -%package -n libosmo-xua-%{libversion} -Summary: Osmocom Message Transfer Part 2 User Adaptation library -License: GPL-2.0-or-later -Group: System/Libraries - -%description -n libosmo-xua-%{libversion} -M2UA (RFC 3331) provides an SCTP (RFC 3873) adaptation layer for the -seamless backhaul of MTP Level 2 user messages and service interface -across an IP network. - %package -n libosmo-xua-devel Summary: Development files for the Osmocom M2UA library License: GPL-2.0-or-later Group: Development/Libraries/C and C++ Requires: libosmo-sigtran-devel = %{version} -Requires: libosmo-xua-%{libversion} = %{version} %description -n libosmo-xua-devel M2UA provides an SCTP adaptation layer for MTP level 2 user messages @@ -151,14 +113,12 @@ %prep %setup -q -%patch0 -p1 %build echo "%{version}" >.tarball-version autoreconf -fiv %configure \ --enable-shared \ - --disable-static \ --includedir="%{_includedir}/%{name}" \ --docdir="%{_docdir}/%{name}" \ --with-systemdsystemunitdir=%{_unitdir} @@ -171,37 +131,27 @@ %check make %{?_smp_mflags} check || (find . -name testsuite.log -exec cat {} +) -%post -n libosmo-mtp-%{libversion} -p /sbin/ldconfig -%postun -n libosmo-mtp-%{libversion} -p /sbin/ldconfig -%post -n libosmo-sccp-%{libversion} -p /sbin/ldconfig -%postun -n libosmo-sccp-%{libversion} -p /sbin/ldconfig %post -n libosmo-sigtran5 -p /sbin/ldconfig %postun -n libosmo-sigtran5 -p /sbin/ldconfig -%post -n libosmo-xua-%{libversion} -p /sbin/ldconfig -%postun -n libosmo-xua-%{libversion} -p /sbin/ldconfig +%if 0%{?suse_version} %preun -n osmo-stp %service_del_preun osmo-stp.service %postun -n osmo-stp %service_del_postun osmo-stp.service %pre -n osmo-stp %service_add_pre osmo-stp.service %post -n osmo-stp %service_add_post osmo-stp.service - -%files -n libosmo-mtp-%{libversion} -%{_libdir}/libosmo-mtp-%{version}.so +%endif %files -n libosmo-mtp-devel %dir %{_includedir}/%{name} %dir %{_includedir}/%{name}/osmocom %{_includedir}/%{name}/osmocom/mtp/ -%{_libdir}/libosmo-mtp.so +%{_libdir}/libmtp.a %{_libdir}/pkgconfig/libosmo-mtp.pc -%files -n libosmo-sccp-%{libversion} -%{_libdir}/libosmo-sccp.so -%{_libdir}/libosmo-sccp-%{version}.so - %files -n libosmo-sccp-devel %dir %{_includedir}/%{name} %dir %{_includedir}/%{name}/osmocom %{_includedir}/%{name}/osmocom/sccp/ +%{_libdir}/libsccp.a %{_libdir}/pkgconfig/libosmo-sccp.pc %files -n libosmo-sigtran5 @@ -212,13 +162,11 @@ %dir %{_includedir}/%{name}/osmocom %{_includedir}/%{name}/osmocom/sigtran %{_libdir}/libosmo-sigtran.so +%{_libdir}/libosmo-sigtran.a %{_libdir}/pkgconfig/libosmo-sigtran.pc -%files -n libosmo-xua-%{libversion} -%{_libdir}/libosmo-xua-%{version}.so - %files -n libosmo-xua-devel -%{_libdir}/libosmo-xua.so +%{_libdir}/libxua.a %{_libdir}/pkgconfig/libosmo-xua.pc %files -n osmo-stp -- To view, visit https://gerrit.osmocom.org/c/libosmo-sccp/+/18278 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmo-sccp Gerrit-Branch: master Gerrit-Change-Id: Id1d77a79b43a9cb967fe3fe10394cca24757af85 Gerrit-Change-Number: 18278 Gerrit-PatchSet: 1 Gerrit-Owner: osmith <osmith at sysmocom.de> Gerrit-MessageType: newchange -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20200515/56e5d2c1/attachment.htm>