Change in docker-playground[master]: ttcn3-bsc-test latest: remove MSC pooling specific bits in latest build

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

neels gerrit-no-reply at lists.osmocom.org
Wed Jun 24 18:39:13 UTC 2020


neels has uploaded this change for review. ( https://gerrit.osmocom.org/c/docker-playground/+/18999 )


Change subject: ttcn3-bsc-test latest: remove MSC pooling specific bits in latest build
......................................................................

ttcn3-bsc-test latest: remove MSC pooling specific bits in latest build

Change-Id: I2b129caa513686a105d31ae56b065757b12fcac8
---
M ttcn3-bsc-test/jenkins.sh
A ttcn3-bsc-test/pre-mscpool-osmo-bsc.cfg
2 files changed, 396 insertions(+), 0 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/docker-playground refs/changes/99/18999/1

diff --git a/ttcn3-bsc-test/jenkins.sh b/ttcn3-bsc-test/jenkins.sh
index 75d5401..7f84151 100755
--- a/ttcn3-bsc-test/jenkins.sh
+++ b/ttcn3-bsc-test/jenkins.sh
@@ -17,6 +17,11 @@
 mkdir $VOL_BASE_DIR/bsc
 cp osmo-bsc.cfg $VOL_BASE_DIR/bsc/
 
+# Disable MSC pooling features until osmo-bsc.git release > 1.6.0 is available
+if [ "$IMAGE_SUFFIX" = "latest" ]; then
+	cp pre-mscpool-osmo-bsc.cfg $VOL_BASE_DIR/bsc/osmo-bsc.cfg
+fi
+
 network_create 172.18.2.0/24
 
 echo Starting container with STP
diff --git a/ttcn3-bsc-test/pre-mscpool-osmo-bsc.cfg b/ttcn3-bsc-test/pre-mscpool-osmo-bsc.cfg
new file mode 100644
index 0000000..3aa61d0
--- /dev/null
+++ b/ttcn3-bsc-test/pre-mscpool-osmo-bsc.cfg
@@ -0,0 +1,391 @@
+!
+! OsmoBSC (1.0.1.122-630df) configuration saved from vty
+!!
+password foo
+!
+log gsmtap 172.18.2.203
+ logging level set-all debug
+ logging filter all 1
+!
+log stderr
+ logging filter all 1
+ logging color 1
+ logging print category 1
+ logging timestamp 1
+ logging print extended-timestamp 1
+ logging print category-hex 0
+ logging print file basename last
+ logging print level 1
+ logging level set-all debug
+ logging level llapd notice
+ logging level linp notice
+ logging level lmux notice
+ logging level lmi notice
+ logging level lmib notice
+ logging level lsms notice
+ logging level lctrl notice
+ logging level lgtp notice
+ logging level lstats notice
+ logging level lgsup notice
+ logging level loap notice
+ logging level lss7 notice
+ logging level lsccp notice
+ logging level lsua notice
+ logging level lm3ua notice
+ logging level lmgcp notice
+!
+stats interval 5
+!
+line vty
+ no login
+ bind 0.0.0.0
+!
+e1_input
+ e1_line 0 driver ipa
+ e1_line 0 port 0
+ no e1_line 0 keepalive
+cs7 instance 0
+ asp asp-clnt-msc-0 2905 2905 m3ua
+  remote-ip 172.18.2.200
+network
+ network country code 1
+ mobile network code 1
+ encryption a5 0 1 3
+ neci 1
+ paging any use tch 0
+ handover 1
+ handover window rxlev averaging 10
+ handover window rxqual averaging 1
+ handover window rxlev neighbor averaging 10
+ handover power budget interval 6
+ handover power budget hysteresis 3
+ handover maximum distance 9999
+ timer t3113 10
+ timer t3212 30
+ bts 0
+  type sysmobts
+  band DCS1800
+  cell_identity 0
+  location_area_code 1
+  dtx uplink force
+  dtx downlink
+  base_station_id_code 10
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  radio-link-timeout 32
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
+  ip.access unit_id 1234 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode manual-si5
+  neighbor-list add arfcn 100
+  neighbor-list add arfcn 200
+  si5 neighbor-list add arfcn 10
+  si5 neighbor-list add arfcn 20
+  codec-support fr hr efr amr
+  gprs mode gprs
+  gprs routing area 0
+  gprs network-control-order nc0
+  gprs cell bvci 1234
+  gprs cell timer blocking-timer 3
+  gprs cell timer blocking-retries 3
+  gprs cell timer unblocking-retries 3
+  gprs cell timer reset-timer 3
+  gprs cell timer reset-retries 3
+  gprs cell timer suspend-timer 10
+  gprs cell timer suspend-retries 3
+  gprs cell timer resume-timer 10
+  gprs cell timer resume-retries 3
+  gprs cell timer capability-update-timer 10
+  gprs cell timer capability-update-retries 3
+  gprs nsei 1234
+  gprs ns timer tns-block 3
+  gprs ns timer tns-block-retries 3
+  gprs ns timer tns-reset 3
+  gprs ns timer tns-reset-retries 3
+  gprs ns timer tns-test 30
+  gprs ns timer tns-alive 3
+  gprs ns timer tns-alive-retries 10
+  gprs nsvc 0 nsvci 1234
+  gprs nsvc 0 local udp port 23000
+  gprs nsvc 0 remote udp port 23000
+  gprs nsvc 0 remote ip 192.168.100.239
+  gprs nsvc 1 nsvci 0
+  gprs nsvc 1 local udp port 0
+  gprs nsvc 1 remote udp port 0
+  gprs nsvc 1 remote ip 0.0.0.0
+  no force-combined-si
+  si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/H
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config PDCH
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config PDCH
+    hopping enabled 0
+ bts 1
+  type sysmobts
+  band DCS1800
+  cell_identity 1
+  location_area_code 1
+  dtx uplink force
+  dtx downlink
+  base_station_id_code 11
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  radio-link-timeout 32
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
+  ip.access unit_id 1235 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode manual-si5
+  neighbor-list add arfcn 100
+  neighbor-list add arfcn 200
+  si5 neighbor-list add arfcn 10
+  si5 neighbor-list add arfcn 20
+  codec-support fr hr efr amr
+  gprs mode gprs
+  gprs routing area 0
+  gprs network-control-order nc0
+  gprs cell bvci 1235
+  gprs cell timer blocking-timer 3
+  gprs cell timer blocking-retries 3
+  gprs cell timer unblocking-retries 3
+  gprs cell timer reset-timer 3
+  gprs cell timer reset-retries 3
+  gprs cell timer suspend-timer 10
+  gprs cell timer suspend-retries 3
+  gprs cell timer resume-timer 10
+  gprs cell timer resume-retries 3
+  gprs cell timer capability-update-timer 10
+  gprs cell timer capability-update-retries 3
+  gprs nsei 1235
+  gprs ns timer tns-block 3
+  gprs ns timer tns-block-retries 3
+  gprs ns timer tns-reset 3
+  gprs ns timer tns-reset-retries 3
+  gprs ns timer tns-test 30
+  gprs ns timer tns-alive 3
+  gprs ns timer tns-alive-retries 10
+  gprs nsvc 0 nsvci 1235
+  gprs nsvc 0 local udp port 23000
+  gprs nsvc 0 remote udp port 23000
+  gprs nsvc 0 remote ip 192.168.100.239
+  gprs nsvc 1 nsvci 0
+  gprs nsvc 1 local udp port 0
+  gprs nsvc 1 remote udp port 0
+  gprs nsvc 1 remote ip 0.0.0.0
+  no force-combined-si
+  si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/H
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config PDCH
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config PDCH
+    hopping enabled 0
+ bts 2
+  type sysmobts
+  band DCS1800
+  cell_identity 1
+  location_area_code 2
+  dtx uplink force
+  dtx downlink
+  base_station_id_code 12
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  radio-link-timeout 32
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
+  ip.access unit_id 1236 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode manual-si5
+  neighbor-list add arfcn 100
+  neighbor-list add arfcn 200
+  si5 neighbor-list add arfcn 10
+  si5 neighbor-list add arfcn 20
+  codec-support fr hr efr amr
+  gprs mode gprs
+  gprs routing area 0
+  gprs network-control-order nc0
+  gprs cell bvci 1236
+  gprs cell timer blocking-timer 3
+  gprs cell timer blocking-retries 3
+  gprs cell timer unblocking-retries 3
+  gprs cell timer reset-timer 3
+  gprs cell timer reset-retries 3
+  gprs cell timer suspend-timer 10
+  gprs cell timer suspend-retries 3
+  gprs cell timer resume-timer 10
+  gprs cell timer resume-retries 3
+  gprs cell timer capability-update-timer 10
+  gprs cell timer capability-update-retries 3
+  gprs nsei 1236
+  gprs ns timer tns-block 3
+  gprs ns timer tns-block-retries 3
+  gprs ns timer tns-reset 3
+  gprs ns timer tns-reset-retries 3
+  gprs ns timer tns-test 30
+  gprs ns timer tns-alive 3
+  gprs ns timer tns-alive-retries 10
+  gprs nsvc 0 nsvci 1236
+  gprs nsvc 0 local udp port 23000
+  gprs nsvc 0 remote udp port 23000
+  gprs nsvc 0 remote ip 192.168.100.239
+  gprs nsvc 1 nsvci 0
+  gprs nsvc 1 local udp port 0
+  gprs nsvc 1 remote udp port 0
+  gprs nsvc 1 remote ip 0.0.0.0
+  no force-combined-si
+  si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/H
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config PDCH
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config PDCH
+    hopping enabled 0
+ bts 3
+  type sysmobts
+  band DCS1800
+  cell_identity 3
+  location_area_code 3
+  # re-use bts 2's ARFCN 871 and BSIC 12 (to test handover config)
+  base_station_id_code 12
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+   timeslot 1
+    phys_chan_config TCH/F
+   timeslot 2
+    phys_chan_config TCH/F
+   timeslot 3
+    phys_chan_config TCH/F
+   timeslot 4
+    phys_chan_config TCH/F
+   timeslot 5
+    phys_chan_config TCH/H
+   timeslot 6
+    phys_chan_config PDCH
+   timeslot 7
+    phys_chan_config PDCH
+msc 0
+ no bsc-welcome-text
+ no bsc-msc-lost-text
+ no bsc-grace-text
+ type normal
+ allow-emergency allow
+ amr-config 12_2k forbidden
+ amr-config 10_2k forbidden
+ amr-config 7_95k forbidden
+ amr-config 7_40k forbidden
+ amr-config 6_70k forbidden
+ amr-config 5_90k allowed
+ amr-config 5_15k forbidden
+ amr-config 4_75k forbidden
+ codec-list fr1 fr2 fr3 hr1 hr3
+ mgw remote-ip 172.18.2.203
+ lcls-mode mgw-loop
+
+bsc
+ mid-call-timeout 0
+ no missing-msc-text
+ctrl
+ bind 0.0.0.0
+cbc
+ remote-ip 172.18.2.203
+ remote-port 48049
+ listen-ip 172.18.2.20
+ listen-port 48050

-- 
To view, visit https://gerrit.osmocom.org/c/docker-playground/+/18999
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: docker-playground
Gerrit-Branch: master
Gerrit-Change-Id: I2b129caa513686a105d31ae56b065757b12fcac8
Gerrit-Change-Number: 18999
Gerrit-PatchSet: 1
Gerrit-Owner: neels <nhofmeyr at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20200624/61d397a6/attachment.htm>


More information about the gerrit-log mailing list