Change in osmocom-bb[master]: firmware: add possibility to configure TCH loops in the DSP

[fixeria]

fixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmocom-bb/+/19458 )


Change subject: firmware: add possibility to configure TCH loops in the DSP
......................................................................

firmware: add possibility to configure TCH loops in the DSP

Change-Id: Ide7b0527ad64a044977a10da4a82a8ecd1fbd8dc
---
M include/l1ctl_proto.h
M src/target/firmware/include/layer1/sync.h
M src/target/firmware/layer1/l23_api.c
M src/target/firmware/layer1/prim_tch.c
4 files changed, 25 insertions(+), 5 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/osmocom-bb refs/changes/58/19458/1

diff --git a/include/l1ctl_proto.h b/include/l1ctl_proto.h
index 05d65de..cf41ac7 100644
--- a/include/l1ctl_proto.h
+++ b/include/l1ctl_proto.h
@@ -149,11 +149,24 @@
 	uint8_t padding[3];
 } __attribute__((packed));
 
+/* 3GPP TS 44.014, section 5.1 (Calypso specific numbers) */
+enum l1ctl_tch_loop_mode {
+	L1CTL_TCH_LOOP_OPEN	= 0x00,
+	L1CTL_TCH_LOOP_A	= 0x01,
+	L1CTL_TCH_LOOP_B	= 0x02,
+	L1CTL_TCH_LOOP_C	= 0x03,
+	L1CTL_TCH_LOOP_D	= 0x04,
+	L1CTL_TCH_LOOP_E	= 0x05,
+	L1CTL_TCH_LOOP_F	= 0x06,
+	L1CTL_TCH_LOOP_I	= 0x07,
+};
+
 /* TCH mode was changed */
 struct l1ctl_tch_mode_conf {
 	uint8_t tch_mode;	/* enum tch_mode */
 	uint8_t audio_mode;
-	uint8_t padding[2];
+	uint8_t tch_loop_mode;	/* enum l1ctl_tch_loop_mode */
+	uint8_t padding[1];
 } __attribute__((packed));
 
 /* data on the CCCH was found. This is following the header */
@@ -231,7 +244,8 @@
 #define AUDIO_RX_SPEAKER	(1<<2)
 #define AUDIO_RX_TRAFFIC_IND	(1<<3)
 	uint8_t audio_mode;
-	uint8_t padding[2];
+	uint8_t tch_loop_mode;	/* enum l1ctl_tch_loop_mode */
+	uint8_t padding[1];
 } __attribute__((packed));
 
 /* the l1_info_ul header is in front */
diff --git a/src/target/firmware/include/layer1/sync.h b/src/target/firmware/include/layer1/sync.h
index 6ed3890..dd93242 100644
--- a/src/target/firmware/include/layer1/sync.h
+++ b/src/target/firmware/include/layer1/sync.h
@@ -83,6 +83,9 @@
 	uint8_t		tch_sync;
 	uint8_t		audio_mode;
 
+	/* 3GPP TS 44.014, section 5.1 (Calypso DSP specific numbers) */
+	enum l1ctl_tch_loop_mode tch_loop_mode;
+
 	/* Transmit queues of pending packets for main DCCH and ACCH */
 	struct llist_head tx_queue[_NUM_L1S_CHAN];
 	struct msgb *tx_meas;
diff --git a/src/target/firmware/layer1/l23_api.c b/src/target/firmware/layer1/l23_api.c
index d52d8f6..62c21f6 100644
--- a/src/target/firmware/layer1/l23_api.c
+++ b/src/target/firmware/layer1/l23_api.c
@@ -352,6 +352,7 @@
 	dsp_load_ciph_param(0, NULL);
 	l1a_tch_mode_set(GSM48_CMODE_SIGN);
 	audio_set_enabled(GSM48_CMODE_SIGN, 0);
+	l1s.tch_loop_mode = L1CTL_TCH_LOOP_OPEN;
 	l1s.neigh_pm.n = 0;
 }
 
@@ -521,6 +522,7 @@
 				msgb_put(msg, sizeof(*mode_conf));
 	mode_conf->tch_mode = tch_mode;
 	mode_conf->audio_mode = audio_mode;
+	mode_conf->tch_loop_mode = l1s.tch_loop_mode;
 
 	l1_queue_for_l2(msg);
 }
@@ -542,6 +544,7 @@
 	audio_set_enabled(tch_mode, audio_mode);
 
 	l1s.tch_sync = 1; /* Needed for audio to work */
+	l1s.tch_loop_mode = tch_mode_req->tch_loop_mode;
 
 	l1ctl_tx_tch_mode_conf(tch_mode, audio_mode);
 }
diff --git a/src/target/firmware/layer1/prim_tch.c b/src/target/firmware/layer1/prim_tch.c
index 0254654..40ef8f3 100644
--- a/src/target/firmware/layer1/prim_tch.c
+++ b/src/target/firmware/layer1/prim_tch.c
@@ -526,7 +526,7 @@
 	dsp_load_tch_param(
 		&l1s.next_time,
 		tch_mode, tch_f_hn ? TCH_F : TCH_H, tch_sub,
-		0, sync, tn
+		l1s.tch_loop_mode, sync, tn
 	);
 
 	dsp_load_rx_task(
@@ -585,7 +585,7 @@
 	dsp_load_tch_param(
 		&l1s.next_time,
 		tch_mode, tch_f_hn ? TCH_F : TCH_H, tch_sub,
-		0, 0, tn
+		l1s.tch_loop_mode, 0, tn
 	);
 
 	dsp_load_rx_task(TCHD_DSP_TASK, 0, tsc); /* burst_id unused for TCH */
@@ -791,7 +791,7 @@
 	dsp_load_tch_param(
 		&l1s.next_time,
 		tch_mode, tch_f_hn ? TCH_F : TCH_H, tch_sub,
-		0, 0, tn
+		l1s.tch_loop_mode, 0, tn
 	);
 
 	dsp_load_rx_task(

-- 
To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/19458
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmocom-bb
Gerrit-Branch: master
Gerrit-Change-Id: Ide7b0527ad64a044977a10da4a82a8ecd1fbd8dc
Gerrit-Change-Number: 19458
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <vyanitskiy at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20200730/30e34375/attachment.htm>