This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
fixeria gerrit-no-reply at lists.osmocom.orgfixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bsc/+/19550 ) Change subject: vty: ensure that all warning messages are prefixed with '%%' ...................................................................... vty: ensure that all warning messages are prefixed with '%%' Change-Id: I6f2348c481ed43904d05b42fd7d5ce04dedbf46b --- M src/osmo-bsc/bsc_vty.c 1 file changed, 57 insertions(+), 55 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/50/19550/1 diff --git a/src/osmo-bsc/bsc_vty.c b/src/osmo-bsc/bsc_vty.c index e4842f7..c1228be 100644 --- a/src/osmo-bsc/bsc_vty.c +++ b/src/osmo-bsc/bsc_vty.c @@ -1771,7 +1771,7 @@ } if (!new_bts) { - vty_out(vty, "Unable to trigger handover, specified bts #%u does not exist %s", + vty_out(vty, "%% Unable to trigger handover, specified bts #%u does not exist %s", bts_nr_new, VTY_NEWLINE); return CMD_WARNING; } @@ -1793,7 +1793,7 @@ } } - vty_out(vty, "Unable to trigger %s, specified connection (bts=%u,trx=%u,ts=%u,ss=%u) does not exist%s", + vty_out(vty, "%% Unable to trigger %s, specified connection (bts=%u,trx=%u,ts=%u,ss=%u) does not exist%s", action, bts_nr, trx_nr, ts_nr, ss_nr, VTY_NEWLINE); return CMD_WARNING; @@ -1865,7 +1865,7 @@ random_idx %= count; } - vty_out(vty, "Cannot find any ongoing voice calls%s", VTY_NEWLINE); + vty_out(vty, "%% Cannot find any ongoing voice calls%s", VTY_NEWLINE); return NULL; } @@ -1892,7 +1892,7 @@ return bts; } } - vty_out(vty, "Cannot find any BTS (other than BTS %u) with free %s lchan%s", + vty_out(vty, "%% Cannot find any BTS (other than BTS %u) with free %s lchan%s", not_this_bts? not_this_bts->nr : 255, gsm_lchant_name(free_type), VTY_NEWLINE); return NULL; } @@ -2036,7 +2036,7 @@ page_group = gsm0502_calc_paging_group(&bts->si_common.chan_desc, str_to_imsi(argv[1])); - vty_out(vty, "%%Paging group for IMSI %" PRIu64 " on BTS #%d is %u%s", + vty_out(vty, "%% Paging group for IMSI %" PRIu64 " on BTS #%d is %u%s", str_to_imsi(argv[1]), bts->nr, page_group, VTY_NEWLINE); return CMD_SUCCESS; @@ -3197,7 +3197,7 @@ enum bts_gprs_mode mode = bts_gprs_mode_parse(argv[0], NULL); if (!bts_gprs_mode_is_compat(bts, mode)) { - vty_out(vty, "This BTS type does not support %s%s", argv[0], + vty_out(vty, "%% This BTS type does not support %s%s", argv[0], VTY_NEWLINE); return CMD_WARNING; } @@ -3305,7 +3305,7 @@ type = get_string_value(osmo_sitype_strs, argv[0]); if (type < 0) { - vty_out(vty, "Error SI Type%s", VTY_NEWLINE); + vty_out(vty, "%% Error SI Type%s", VTY_NEWLINE); return CMD_WARNING; } @@ -3328,12 +3328,12 @@ type = get_string_value(osmo_sitype_strs, argv[0]); if (type < 0) { - vty_out(vty, "Error SI Type%s", VTY_NEWLINE); + vty_out(vty, "%% Error SI Type%s", VTY_NEWLINE); return CMD_WARNING; } if (!(bts->si_mode_static & (1 << type))) { - vty_out(vty, "SI Type %s is not configured in static mode%s", + vty_out(vty, "%% SI Type %s is not configured in static mode%s", get_value_string(osmo_sitype_strs, type), VTY_NEWLINE); return CMD_WARNING; } @@ -3344,7 +3344,7 @@ /* Parse the user-specified SI in hex format, [partially] overwriting padding */ rc = osmo_hexparse(argv[1], GSM_BTS_SI(bts, type), GSM_MACBLOCK_LEN); if (rc < 0 || rc > GSM_MACBLOCK_LEN) { - vty_out(vty, "Error parsing HEXSTRING%s", VTY_NEWLINE); + vty_out(vty, "%% Error parsing HEXSTRING%s", VTY_NEWLINE); return CMD_WARNING; } @@ -3376,7 +3376,7 @@ struct gsm_bts *bts = vty->index; if (!is_ipaccess_bts(bts) || is_sysmobts_v2(bts)) { - vty_out(vty, "This command is only intended for ipaccess nanoBTS. See OS#3707.%s", + vty_out(vty, "%% This command is only intended for ipaccess nanoBTS. See OS#3707.%s", VTY_NEWLINE); return CMD_WARNING; } @@ -3497,24 +3497,24 @@ switch (r) { case 1: - vty_out(vty, "Warning: multiple threshold-high are not supported, overriding with %u%s", + vty_out(vty, "%% Warning: multiple threshold-high are not supported, overriding with %u%s", thresh_hi, VTY_NEWLINE); break; case EARFCN_THRESH_LOW_INVALID: - vty_out(vty, "Warning: multiple threshold-low are not supported, overriding with %u%s", + vty_out(vty, "%% Warning: multiple threshold-low are not supported, overriding with %u%s", thresh_lo, VTY_NEWLINE); break; case EARFCN_QRXLV_INVALID + 1: - vty_out(vty, "Warning: multiple QRXLEVMIN are not supported, overriding with %u%s", + vty_out(vty, "%% Warning: multiple QRXLEVMIN are not supported, overriding with %u%s", qrx, VTY_NEWLINE); break; case EARFCN_PRIO_INVALID: - vty_out(vty, "Warning: multiple priorities are not supported, overriding with %u%s", + vty_out(vty, "%% Warning: multiple priorities are not supported, overriding with %u%s", prio, VTY_NEWLINE); break; default: if (r < 0) { - vty_out(vty, "Unable to add ARFCN %u: %s%s", arfcn, strerror(-r), VTY_NEWLINE); + vty_out(vty, "%% Unable to add ARFCN %u: %s%s", arfcn, strerror(-r), VTY_NEWLINE); return CMD_WARNING; } } @@ -3522,7 +3522,7 @@ if (si2q_num(bts) <= SI2Q_MAX_NUM) return CMD_SUCCESS; - vty_out(vty, "Warning: not enough space in SI2quater (%u/%u used) for a given EARFCN %u%s", + vty_out(vty, "%% Warning: not enough space in SI2quater (%u/%u used) for a given EARFCN %u%s", bts->si2q_count, SI2Q_MAX_NUM, arfcn, VTY_NEWLINE); osmo_earfcn_del(e, arfcn); @@ -3542,7 +3542,7 @@ uint16_t arfcn = atoi(argv[0]); int r = osmo_earfcn_del(e, arfcn); if (r < 0) { - vty_out(vty, "Unable to delete arfcn %u: %s%s", arfcn, + vty_out(vty, "%% Unable to delete arfcn %u: %s%s", arfcn, strerror(-r), VTY_NEWLINE); return CMD_WARNING; } @@ -3562,14 +3562,16 @@ switch(bts_uarfcn_add(bts, arfcn, scramble, atoi(argv[2]))) { case -ENOMEM: - vty_out(vty, "Unable to add UARFCN: max number of UARFCNs (%u) reached%s", MAX_EARFCN_LIST, VTY_NEWLINE); + vty_out(vty, "%% Unable to add UARFCN: max number of UARFCNs (%u) reached%s", + MAX_EARFCN_LIST, VTY_NEWLINE); return CMD_WARNING; case -ENOSPC: - vty_out(vty, "Warning: not enough space in SI2quater for a given UARFCN (%u, %u)%s", + vty_out(vty, "%% Warning: not enough space in SI2quater for a given UARFCN (%u, %u)%s", arfcn, scramble, VTY_NEWLINE); return CMD_WARNING; case -EADDRINUSE: - vty_out(vty, "Unable to add UARFCN: (%u, %u) is already added%s", arfcn, scramble, VTY_NEWLINE); + vty_out(vty, "%% Unable to add UARFCN: (%u, %u) is already added%s", + arfcn, scramble, VTY_NEWLINE); return CMD_WARNING; } @@ -3588,7 +3590,7 @@ struct gsm_bts *bts = vty->index; if (bts_uarfcn_del(bts, atoi(argv[0]), atoi(argv[1])) < 0) { - vty_out(vty, "Unable to delete uarfcn: pair not found%s", + vty_out(vty, "%% Unable to delete uarfcn: pair not found%s", VTY_NEWLINE); return CMD_WARNING; } @@ -3734,9 +3736,9 @@ error = acc_ramp_set_step_interval(&bts->acc_ramp, atoi(argv[0])); if (error != 0) { if (error == -ERANGE) - vty_out(vty, "Unable to set ACC ramp step interval: value out of range%s", VTY_NEWLINE); + vty_out(vty, "%% Unable to set ACC ramp step interval: value out of range%s", VTY_NEWLINE); else - vty_out(vty, "Unable to set ACC ramp step interval: unknown error%s", VTY_NEWLINE); + vty_out(vty, "%% Unable to set ACC ramp step interval: unknown error%s", VTY_NEWLINE); return CMD_WARNING; } @@ -3757,9 +3759,9 @@ error = acc_ramp_set_step_size(&bts->acc_ramp, atoi(argv[0])); if (error != 0) { if (error == -ERANGE) - vty_out(vty, "Unable to set ACC ramp step size: value out of range%s", VTY_NEWLINE); + vty_out(vty, "%% Unable to set ACC ramp step size: value out of range%s", VTY_NEWLINE); else - vty_out(vty, "Unable to set ACC ramp step size: unknown error%s", VTY_NEWLINE); + vty_out(vty, "%% Unable to set ACC ramp step size: unknown error%s", VTY_NEWLINE); return CMD_WARNING; } @@ -3778,7 +3780,7 @@ rc = acc_ramp_set_chan_load_thresholds(&bts->acc_ramp, atoi(argv[0]), atoi(argv[1])); if (rc < 0) { - vty_out(vty, "Unable to set ACC channel load thresholds%s", VTY_NEWLINE); + vty_out(vty, "%% Unable to set ACC channel load thresholds%s", VTY_NEWLINE); return CMD_WARNING; } @@ -3909,20 +3911,20 @@ if (!is_ipaccess_bts(bts)) { - vty_out(vty, "This feature is only available for IP systems.%s", + vty_out(vty, "%% This feature is only available for IP systems.%s", VTY_NEWLINE); return CMD_WARNING; } other_bts = gsm_bts_num(bts->network, dep); if (!other_bts || !is_ipaccess_bts(other_bts)) { - vty_out(vty, "This feature is only available for IP systems.%s", + vty_out(vty, "%% This feature is only available for IP systems.%s", VTY_NEWLINE); return CMD_WARNING; } if (dep >= bts->nr) { - vty_out(vty, "%%Need to depend on an already declared unit.%s", + vty_out(vty, "%% Need to depend on an already declared unit.%s", VTY_NEWLINE); return CMD_WARNING; } @@ -3964,13 +3966,13 @@ for (i = 0; i < argc; i++) { mode = atoi(argv[i]); if (mode_prev > mode) { - vty_out(vty, "Modes must be listed in order%s", + vty_out(vty, "%% Modes must be listed in order%s", VTY_NEWLINE); return -1; } if (mode_prev == mode) { - vty_out(vty, "Modes must be unique %s", VTY_NEWLINE); + vty_out(vty, "%% Modes must be unique %s", VTY_NEWLINE); return -2; } mode_prev = mode; @@ -4063,7 +4065,7 @@ rc = gsm48_multirate_config(NULL, mr_conf, mr->ms_mode, mr->num_modes); if (rc != 0) { vty_out(vty, - "Invalid AMR multirate configuration (tch-f, ms) - check parameters%s", + "%% Invalid AMR multirate configuration (tch-f, ms) - check parameters%s", VTY_NEWLINE); vty_rc = CMD_WARNING; } @@ -4071,7 +4073,7 @@ rc = gsm48_multirate_config(NULL, mr_conf, mr->bts_mode, mr->num_modes); if (rc != 0) { vty_out(vty, - "Invalid AMR multirate configuration (tch-f, bts) - check parameters%s", + "%% Invalid AMR multirate configuration (tch-f, bts) - check parameters%s", VTY_NEWLINE); vty_rc = CMD_WARNING; } @@ -4081,7 +4083,7 @@ rc = gsm48_multirate_config(NULL, mr_conf, mr->ms_mode, mr->num_modes); if (rc != 0) { vty_out(vty, - "Invalid AMR multirate configuration (tch-h, ms) - check parameters%s", + "%% Invalid AMR multirate configuration (tch-h, ms) - check parameters%s", VTY_NEWLINE); vty_rc = CMD_WARNING; } @@ -4089,7 +4091,7 @@ rc = gsm48_multirate_config(NULL, mr_conf, mr->bts_mode, mr->num_modes); if (rc != 0) { vty_out(vty, - "Invalid AMR multirate configuration (tch-h, bts) - check parameters%s", + "%% Invalid AMR multirate configuration (tch-h, bts) - check parameters%s", VTY_NEWLINE); vty_rc = CMD_WARNING; } @@ -4330,7 +4332,7 @@ bts->T3113_dynamic = true; break; default: - vty_out(vty, "T%d cannot be set to dynamic%s", d->T, VTY_NEWLINE); + vty_out(vty, "%% T%d cannot be set to dynamic%s", d->T, VTY_NEWLINE); return CMD_WARNING; } @@ -4356,7 +4358,7 @@ bts->T3113_dynamic = false; break; default: - vty_out(vty, "T%d already is non-dynamic%s", d->T, VTY_NEWLINE); + vty_out(vty, "%% T%d already is non-dynamic%s", d->T, VTY_NEWLINE); return CMD_WARNING; } @@ -4613,7 +4615,7 @@ int enabled = atoi(argv[0]); if (enabled && !osmo_bts_has_feature(&ts->trx->bts->model->features, BTS_FEAT_HOPPING)) { - vty_out(vty, "BTS model does not support hopping%s", + vty_out(vty, "%% BTS model does not support hopping%s", VTY_NEWLINE); return CMD_WARNING; } @@ -4742,19 +4744,19 @@ bts_nr = atoi(argv[0]); if (bts_nr >= gsmnet->num_bts) { - vty_out(vty, "BTS number must be between 0 and %d. It was %d.%s", + vty_out(vty, "%% BTS number must be between 0 and %d. It was %d.%s", gsmnet->num_bts, bts_nr, VTY_NEWLINE); return CMD_WARNING; } bts = gsm_bts_num(gsmnet, bts_nr); if (!bts) { - vty_out(vty, "BTS Nr. %d could not be found.%s", bts_nr, VTY_NEWLINE); + vty_out(vty, "%% BTS Nr. %d could not be found.%s", bts_nr, VTY_NEWLINE); return CMD_WARNING; } if (!is_ipaccess_bts(bts)) { - vty_out(vty, "This command only works for ipaccess.%s", VTY_NEWLINE); + vty_out(vty, "%% This command only works for ipaccess.%s", VTY_NEWLINE); return CMD_WARNING; } @@ -4768,7 +4770,7 @@ ipaccess_drop_rsl(trx, "vty"); } } else { - vty_out(vty, "Argument must be 'oml# or 'rsl'.%s", VTY_NEWLINE); + vty_out(vty, "%% Argument must be 'oml# or 'rsl'.%s", VTY_NEWLINE); return CMD_WARNING; } @@ -4789,19 +4791,19 @@ bts_nr = atoi(argv[0]); if (bts_nr >= gsmnet->num_bts) { - vty_out(vty, "BTS number must be between 0 and %d. It was %d.%s", + vty_out(vty, "%% BTS number must be between 0 and %d. It was %d.%s", gsmnet->num_bts, bts_nr, VTY_NEWLINE); return CMD_WARNING; } bts = gsm_bts_num(gsmnet, bts_nr); if (!bts) { - vty_out(vty, "BTS Nr. %d could not be found.%s", bts_nr, VTY_NEWLINE); + vty_out(vty, "%% BTS Nr. %d could not be found.%s", bts_nr, VTY_NEWLINE); return CMD_WARNING; } if (!is_ipaccess_bts(bts) || is_sysmobts_v2(bts)) { - vty_out(vty, "This command only works for ipaccess nanoBTS.%s", + vty_out(vty, "%% This command only works for ipaccess nanoBTS.%s", VTY_NEWLINE); return CMD_WARNING; } @@ -4826,14 +4828,14 @@ bts_nr = atoi(argv[0]); if (bts_nr >= gsmnet->num_bts) { - vty_out(vty, "BTS number must be between 0 and %d. It was %d.%s", + vty_out(vty, "%% BTS number must be between 0 and %d. It was %d.%s", gsmnet->num_bts, bts_nr, VTY_NEWLINE); return CMD_WARNING; } bts = gsm_bts_num(gsmnet, bts_nr); if (!bts) { - vty_out(vty, "BTS Nr. %d could not be found.%s", bts_nr, VTY_NEWLINE); + vty_out(vty, "%% BTS Nr. %d could not be found.%s", bts_nr, VTY_NEWLINE); return CMD_WARNING; } @@ -4872,7 +4874,7 @@ } rc = osmo_hexparse(argv[3], buf, sizeof(buf)); if (rc < 0 || rc > sizeof(buf)) { - vty_out(vty, "Error parsing HEXSTRING%s", VTY_NEWLINE); + vty_out(vty, "%% Error parsing HEXSTRING%s", VTY_NEWLINE); return CMD_WARNING; } @@ -4885,7 +4887,7 @@ else if (!strcmp(type_str, "default")) cb_cmd.command = RSL_CB_CMD_TYPE_DEFAULT; else { - vty_out(vty, "Error parsing type%s", VTY_NEWLINE); + vty_out(vty, "%% Error parsing type%s", VTY_NEWLINE); return CMD_WARNING; } @@ -4903,7 +4905,7 @@ cb_cmd.last_block = RSL_CB_CMD_LASTBLOCK_4; break; default: - vty_out(vty, "Error parsing LASTBLOCK%s", VTY_NEWLINE); + vty_out(vty, "%% Error parsing LASTBLOCK%s", VTY_NEWLINE); return CMD_WARNING; } @@ -5019,14 +5021,14 @@ rc = gsm48_multirate_config(lchan->mr_ms_lv, mr_conf, mr.ms_mode, mr.num_modes); if (rc != 0) { vty_out(vty, - "Invalid AMR multirate configuration (%s, amr mode %d, ms) - check parameters%s", + "%% Invalid AMR multirate configuration (%s, amr mode %d, ms) - check parameters%s", gsm_lchant_name(lchan->type), amr_mode, VTY_NEWLINE); vty_rc = CMD_WARNING; } rc = gsm48_multirate_config(lchan->mr_bts_lv, mr_conf, mr.bts_mode, mr.num_modes); if (rc != 0) { vty_out(vty, - "Invalid AMR multirate configuration (%s, amr mode %d, bts) - check parameters%s", + "%% Invalid AMR multirate configuration (%s, amr mode %d, bts) - check parameters%s", gsm_lchant_name(lchan->type), amr_mode, VTY_NEWLINE); vty_rc = CMD_WARNING; } @@ -5485,7 +5487,7 @@ msc = osmo_msc_data_alloc(bsc_gsmnet, index); if (!msc) { - vty_out(vty, "%%Failed to allocate MSC data.%s", VTY_NEWLINE); + vty_out(vty, "%% Failed to allocate MSC data.%s", VTY_NEWLINE); return CMD_WARNING; } @@ -6141,7 +6143,7 @@ bsc_subscr = bsc_subscr_find_or_create_by_imsi(bsc_gsmnet->bsc_subscribers, imsi); if (!bsc_subscr) { - vty_out(vty, "%%failed to enable logging for subscriber with IMSI(%s)%s", + vty_out(vty, "%% failed to enable logging for subscriber with IMSI(%s)%s", imsi, VTY_NEWLINE); return CMD_WARNING; } -- To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/19550 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-Change-Id: I6f2348c481ed43904d05b42fd7d5ce04dedbf46b Gerrit-Change-Number: 19550 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy at sysmocom.de> Gerrit-MessageType: newchange -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20200809/8b7ee169/attachment.htm>