This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
laforge gerrit-no-reply at lists.osmocom.orglaforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bsc/+/17723 )
Change subject: doc/manuals: remove deprecated DNAT from the VTY reference
......................................................................
doc/manuals: remove deprecated DNAT from the VTY reference
Change-Id: Ib21c30041508a9ec9afda56bda95bddf4d665bc8
---
M doc/manuals/vty/bsc_vty_reference.xml
1 file changed, 5 insertions(+), 10 deletions(-)
Approvals:
Jenkins Builder: Verified
laforge: Looks good to me, approved
diff --git a/doc/manuals/vty/bsc_vty_reference.xml b/doc/manuals/vty/bsc_vty_reference.xml
index 48b9fb5..f2266e4 100644
--- a/doc/manuals/vty/bsc_vty_reference.xml
+++ b/doc/manuals/vty/bsc_vty_reference.xml
@@ -330,7 +330,7 @@
<param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
- <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
+ <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
@@ -345,7 +345,6 @@
<param name='ho' doc='Hand-Over Process' />
<param name='hodec' doc='Hand-Over Decision' />
<param name='ref' doc='Reference Counting' />
- <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
<param name='ctrl' doc='Control interface' />
<param name='filter' doc='BSC/NAT IMSI based filtering' />
<param name='pcu' doc='PCU Interface' />
@@ -412,7 +411,7 @@
<param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
</params>
</command>
- <command id='logp (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
+ <command id='logp (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
<params>
<param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
<param name='rll' doc='A-bis Radio Link Layer (RLL)' />
@@ -426,7 +425,6 @@
<param name='ho' doc='Hand-Over Process' />
<param name='hodec' doc='Hand-Over Decision' />
<param name='ref' doc='Reference Counting' />
- <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
<param name='ctrl' doc='Control interface' />
<param name='filter' doc='BSC/NAT IMSI based filtering' />
<param name='pcu' doc='PCU Interface' />
@@ -1064,7 +1062,7 @@
<param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
- <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
+ <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
@@ -1079,7 +1077,6 @@
<param name='ho' doc='Hand-Over Process' />
<param name='hodec' doc='Hand-Over Decision' />
<param name='ref' doc='Reference Counting' />
- <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
<param name='ctrl' doc='Control interface' />
<param name='filter' doc='BSC/NAT IMSI based filtering' />
<param name='pcu' doc='PCU Interface' />
@@ -1146,7 +1143,7 @@
<param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
</params>
</command>
- <command id='logp (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
+ <command id='logp (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
<params>
<param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
<param name='rll' doc='A-bis Radio Link Layer (RLL)' />
@@ -1160,7 +1157,6 @@
<param name='ho' doc='Hand-Over Process' />
<param name='hodec' doc='Hand-Over Decision' />
<param name='ref' doc='Reference Counting' />
- <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
<param name='ctrl' doc='Control interface' />
<param name='filter' doc='BSC/NAT IMSI based filtering' />
<param name='pcu' doc='PCU Interface' />
@@ -1999,7 +1995,7 @@
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
- <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
+ <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|ctrl|filter|pcu|lcls|chan|ts|as|cbs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
@@ -2014,7 +2010,6 @@
<param name='ho' doc='Hand-Over Process' />
<param name='hodec' doc='Hand-Over Decision' />
<param name='ref' doc='Reference Counting' />
- <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
<param name='ctrl' doc='Control interface' />
<param name='filter' doc='BSC/NAT IMSI based filtering' />
<param name='pcu' doc='PCU Interface' />
--
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/17723
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: Ib21c30041508a9ec9afda56bda95bddf4d665bc8
Gerrit-Change-Number: 17723
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <axilirator at gmail.com>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <axilirator at gmail.com>
Gerrit-Reviewer: laforge <laforge at osmocom.org>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20200404/aee6f1fc/attachment.htm>