Change in ...simtrace2[master]: hw: put board specific pin definition in corresponding file

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

tsaitgaist gerrit-no-reply at lists.osmocom.org
Tue Oct 1 13:43:42 UTC 2019


tsaitgaist has uploaded this change for review. ( https://gerrit.osmocom.org/c/simtrace2/+/15647


Change subject: hw: put board specific pin definition in corresponding file
......................................................................

hw: put board specific pin definition in corresponding file

SIM_PWEN and VCC_FWD are signals specific to the simtrace boards.
the corresponding pins PA5 and PA26 are used for other signal
on the octsim-tester.

Change-Id: I51f37dd112cf681f4b1dbb3d2320ff9a697eaa08
---
M firmware/libboard/common/include/board_common.h
M firmware/libboard/simtrace/include/board.h
2 files changed, 3 insertions(+), 6 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/47/15647/1

diff --git a/firmware/libboard/common/include/board_common.h b/firmware/libboard/common/include/board_common.h
index cb72d40..ded4762 100644
--- a/firmware/libboard/common/include/board_common.h
+++ b/firmware/libboard/common/include/board_common.h
@@ -112,9 +112,6 @@
 /* Interrupt request ID of USART peripheral connected to the phone */
 #define IRQ_USART_PHONE USART1_IRQn
 
-#define SIM_PWEN        PIO_PA5
-#define VCC_FWD         PIO_PA26
-
 // Board has UDP controller
 #define BOARD_USB_UDP
 
diff --git a/firmware/libboard/simtrace/include/board.h b/firmware/libboard/simtrace/include/board.h
index 0c1e533..7703451 100644
--- a/firmware/libboard/simtrace/include/board.h
+++ b/firmware/libboard/simtrace/include/board.h
@@ -35,7 +35,7 @@
 /* Button to force bootloader start (shorted to ground when pressed */
 #define PIN_BOOTLOADER_SW      {PIO_PA31, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
 /* Enable powering the card using the second 3.3 V output of the LDO (active high) */
-#define SIM_PWEN_PIN           {SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+#define SIM_PWEN_PIN           {PIO_PA5, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
 /* Enable powering the SIM card */
 #define PWR_PINS                SIM_PWEN_PIN
 /* Card presence pin */
@@ -93,9 +93,9 @@
 /* Pins used to sniff phone-card communication */
 #define PINS_SIM_SNIFF          PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF
 /* Disable power converter 4.5-6V to 3.3V (active high) */
-#define PIN_SIM_PWEN_SNIFF     {SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+#define PIN_SIM_PWEN_SNIFF     {PIO_PA5, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
 /* Enable power switch to forward VCC_PHONE to VCC_SIM (active high) */
-#define PIN_VCC_FWD_SNIFF      {VCC_FWD, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+#define PIN_VCC_FWD_SNIFF      {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
 /* Use phone VCC to power card */
 #define PINS_PWR_SNIFF          PIN_SIM_PWEN_SNIFF, PIN_VCC_FWD_SNIFF
 

-- 
To view, visit https://gerrit.osmocom.org/c/simtrace2/+/15647
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: simtrace2
Gerrit-Branch: master
Gerrit-Change-Id: I51f37dd112cf681f4b1dbb3d2320ff9a697eaa08
Gerrit-Change-Number: 15647
Gerrit-PatchSet: 1
Gerrit-Owner: tsaitgaist <kredon at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20191001/98defdc7/attachment.htm>


More information about the gerrit-log mailing list