This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
laforge gerrit-no-reply at lists.osmocom.orglaforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ccid-firmware/+/16265 ) Change subject: sercom config for t1 ...................................................................... sercom config for t1 T0 doesn't work, as the datasheet states it's synchronous, apparently to the internal clock. That doesn't align too well with what 7816-3 says, so this already fails during the ATR after a few tries. Change-Id: Ie6cb7ec51036f1de15c83b59d130f3cb85309594 --- M sysmoOCTSIM/config/hpl_sercom_config.h 1 file changed, 14 insertions(+), 14 deletions(-) Approvals: laforge: Looks good to me, approved Jenkins Builder: Verified diff --git a/sysmoOCTSIM/config/hpl_sercom_config.h b/sysmoOCTSIM/config/hpl_sercom_config.h index beac040..bb2bbff 100644 --- a/sysmoOCTSIM/config/hpl_sercom_config.h +++ b/sysmoOCTSIM/config/hpl_sercom_config.h @@ -52,7 +52,7 @@ // <i> Number of stop bits in USART frame // <id> usart_stop_bit #ifndef CONF_SERCOM_0_USART_SBMODE -#define CONF_SERCOM_0_USART_SBMODE 0 +#define CONF_SERCOM_0_USART_SBMODE 1 #endif // <o> Baud rate <1-3000000> @@ -70,7 +70,7 @@ // <i> Define ISO7816 protocol type as 0. // <id> usart_iso7816_type #ifndef CONF_SERCOM_0_USART_ISO7816_PROTOCOL_T -#define CONF_SERCOM_0_USART_ISO7816_PROTOCOL_T 0x1 +#define CONF_SERCOM_0_USART_ISO7816_PROTOCOL_T 0x0 #endif // <o> ISO7816 Inhibit Not Acknowledge @@ -324,7 +324,7 @@ // <i> Number of stop bits in USART frame // <id> usart_stop_bit #ifndef CONF_SERCOM_1_USART_SBMODE -#define CONF_SERCOM_1_USART_SBMODE 0 +#define CONF_SERCOM_1_USART_SBMODE 1 #endif // <o> Baud rate <1-3000000> @@ -342,7 +342,7 @@ // <i> Define ISO7816 protocol type as 0. // <id> usart_iso7816_type #ifndef CONF_SERCOM_1_USART_ISO7816_PROTOCOL_T -#define CONF_SERCOM_1_USART_ISO7816_PROTOCOL_T 0x1 +#define CONF_SERCOM_1_USART_ISO7816_PROTOCOL_T 0x0 #endif // <o> ISO7816 Inhibit Not Acknowledge @@ -596,7 +596,7 @@ // <i> Number of stop bits in USART frame // <id> usart_stop_bit #ifndef CONF_SERCOM_2_USART_SBMODE -#define CONF_SERCOM_2_USART_SBMODE 0 +#define CONF_SERCOM_2_USART_SBMODE 1 #endif // <o> Baud rate <1-3000000> @@ -614,7 +614,7 @@ // <i> Define ISO7816 protocol type as 0. // <id> usart_iso7816_type #ifndef CONF_SERCOM_2_USART_ISO7816_PROTOCOL_T -#define CONF_SERCOM_2_USART_ISO7816_PROTOCOL_T 0x1 +#define CONF_SERCOM_2_USART_ISO7816_PROTOCOL_T 0x0 #endif // <o> ISO7816 Inhibit Not Acknowledge @@ -868,7 +868,7 @@ // <i> Number of stop bits in USART frame // <id> usart_stop_bit #ifndef CONF_SERCOM_3_USART_SBMODE -#define CONF_SERCOM_3_USART_SBMODE 0 +#define CONF_SERCOM_3_USART_SBMODE 1 #endif // <o> Baud rate <1-3000000> @@ -886,7 +886,7 @@ // <i> Define ISO7816 protocol type as 0. // <id> usart_iso7816_type #ifndef CONF_SERCOM_3_USART_ISO7816_PROTOCOL_T -#define CONF_SERCOM_3_USART_ISO7816_PROTOCOL_T 0x1 +#define CONF_SERCOM_3_USART_ISO7816_PROTOCOL_T 0x0 #endif // <o> ISO7816 Inhibit Not Acknowledge @@ -1140,7 +1140,7 @@ // <i> Number of stop bits in USART frame // <id> usart_stop_bit #ifndef CONF_SERCOM_4_USART_SBMODE -#define CONF_SERCOM_4_USART_SBMODE 0 +#define CONF_SERCOM_4_USART_SBMODE 1 #endif // <o> Baud rate <1-3000000> @@ -1158,7 +1158,7 @@ // <i> Define ISO7816 protocol type as 0. // <id> usart_iso7816_type #ifndef CONF_SERCOM_4_USART_ISO7816_PROTOCOL_T -#define CONF_SERCOM_4_USART_ISO7816_PROTOCOL_T 0x1 +#define CONF_SERCOM_4_USART_ISO7816_PROTOCOL_T 0x0 #endif // <o> ISO7816 Inhibit Not Acknowledge @@ -1412,7 +1412,7 @@ // <i> Number of stop bits in USART frame // <id> usart_stop_bit #ifndef CONF_SERCOM_5_USART_SBMODE -#define CONF_SERCOM_5_USART_SBMODE 0 +#define CONF_SERCOM_5_USART_SBMODE 1 #endif // <o> Baud rate <1-3000000> @@ -1430,7 +1430,7 @@ // <i> Define ISO7816 protocol type as 0. // <id> usart_iso7816_type #ifndef CONF_SERCOM_5_USART_ISO7816_PROTOCOL_T -#define CONF_SERCOM_5_USART_ISO7816_PROTOCOL_T 0x1 +#define CONF_SERCOM_5_USART_ISO7816_PROTOCOL_T 0x0 #endif // <o> ISO7816 Inhibit Not Acknowledge @@ -1684,7 +1684,7 @@ // <i> Number of stop bits in USART frame // <id> usart_stop_bit #ifndef CONF_SERCOM_6_USART_SBMODE -#define CONF_SERCOM_6_USART_SBMODE 0 +#define CONF_SERCOM_6_USART_SBMODE 1 #endif // <o> Baud rate <1-3000000> @@ -1702,7 +1702,7 @@ // <i> Define ISO7816 protocol type as 0. // <id> usart_iso7816_type #ifndef CONF_SERCOM_6_USART_ISO7816_PROTOCOL_T -#define CONF_SERCOM_6_USART_ISO7816_PROTOCOL_T 0x1 +#define CONF_SERCOM_6_USART_ISO7816_PROTOCOL_T 0x0 #endif // <o> ISO7816 Inhibit Not Acknowledge -- To view, visit https://gerrit.osmocom.org/c/osmo-ccid-firmware/+/16265 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ccid-firmware Gerrit-Branch: master Gerrit-Change-Id: Ie6cb7ec51036f1de15c83b59d130f3cb85309594 Gerrit-Change-Number: 16265 Gerrit-PatchSet: 4 Gerrit-Owner: Hoernchen <ewild at sysmocom.de> Gerrit-Reviewer: Hoernchen <ewild at sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge at osmocom.org> Gerrit-MessageType: merged -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20191128/45821d97/attachment.htm>