This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Pau Espin Pedrol gerrit-no-reply at lists.osmocom.orgPau Espin Pedrol has uploaded this change for review. ( https://gerrit.osmocom.org/14036
Change subject: osmux: Redo read/write osmux glue code to have data routed correctly
......................................................................
osmux: Redo read/write osmux glue code to have data routed correctly
Remove old BTS/NET no longer in use and meaningless. Use new osmo-mgw
APIs to inject payload RTP<->Osmux on the correct socket and conn.
Change-Id: I60b6ba3ffdc74efff945ba13a0b736798bdf5d8c
---
M src/libosmo-mgcp/mgcp_osmux.c
1 file changed, 78 insertions(+), 208 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-mgw refs/changes/36/14036/1
diff --git a/src/libosmo-mgcp/mgcp_osmux.c b/src/libosmo-mgcp/mgcp_osmux.c
index 536b65b..7a817f8 100644
--- a/src/libosmo-mgcp/mgcp_osmux.c
+++ b/src/libosmo-mgcp/mgcp_osmux.c
@@ -178,6 +178,12 @@
memcpy(msg->data, buf, buf_len);
msgb_put(msg, buf_len);
+ if (conn->osmux.state != OSMUX_STATE_ENABLED) {
+ LOGPCONN(conn->conn, DLMGCP, LOGL_INFO, "forwarding RTP to Osmux conn not yet enabled, dropping (cid=%d)\n",
+ conn->osmux.cid);
+ return -1;
+ }
+
while ((ret = osmux_xfrm_input(conn->osmux.in, msg, conn->osmux.cid)) > 0) {
/* batch full, build and deliver it */
osmux_xfrm_input_deliver(conn->osmux.in);
@@ -186,111 +192,54 @@
}
/* Lookup the endpoint that corresponds to the specified address (port) */
-static struct mgcp_endpoint *
-endpoint_lookup(struct mgcp_config *cfg, int cid,
- struct in_addr *from_addr, int type)
+static struct mgcp_conn_rtp*
+osmux_conn_lookup(struct mgcp_config *cfg, uint8_t cid,
+ struct in_addr *from_addr)
{
- struct mgcp_endpoint *endp = NULL;
+ struct mgcp_endpoint *endp;
+ struct mgcp_conn *conn = NULL;
+ struct mgcp_conn_rtp * conn_rtp;
int i;
- struct mgcp_conn_rtp *conn_net = NULL;
- struct mgcp_conn_rtp *conn_bts = NULL;
for (i=0; i<cfg->trunk.number_endpoints; i++) {
- struct in_addr *this;
endp = &cfg->trunk.endpoints[i];
-#if 0
- if (!tmp->allocated)
- continue;
-#endif
+ llist_for_each_entry(conn, &endp->conns, entry) {
+ if (conn->type != MGCP_CONN_TYPE_RTP)
+ continue;
- switch(type) {
- case MGCP_DEST_NET:
- /* FIXME: Get rid of CONN_ID_XXX! */
- conn_net = mgcp_conn_get_rtp(endp, CONN_ID_NET);
- if (conn_net)
- this = &conn_net->end.addr;
- else
- this = NULL;
- break;
- case MGCP_DEST_BTS:
- /* FIXME: Get rid of CONN_ID_XXX! */
- conn_bts = mgcp_conn_get_rtp(endp, CONN_ID_BTS);
- if (conn_bts)
- this = &conn_bts->end.addr;
- else
- this = NULL;
- break;
- default:
- /* Should not ever happen */
- LOGP(DLMGCP, LOGL_ERROR, "Bad type %d. Fix your code.\n", type);
- return NULL;
+ conn_rtp = &conn->u.rtp;
+ if (!mgcp_conn_rtp_is_osmux(conn_rtp))
+ continue;
+
+ if (conn_rtp->osmux.cid == cid)
+ return conn_rtp;
}
-
- /* FIXME: Get rid of CONN_ID_XXX! */
- conn_net = mgcp_conn_get_rtp(endp, CONN_ID_NET);
- if (conn_net && this && conn_net->osmux.cid == cid
- && this->s_addr == from_addr->s_addr)
- return endp;
}
- LOGP(DLMGCP, LOGL_ERROR, "Cannot find endpoint with cid=%d\n", cid);
+ LOGP(DLMGCP, LOGL_ERROR, "Cannot find osmux conn with cid=%d\n", cid);
return NULL;
}
-static void scheduled_tx_net_cb(struct msgb *msg, void *data)
+/* FIXME: this is declared and used in mgcp_network.c, but documentation of mgcp_dispatch_rtp_bridge_cb() states another enum is to be used */
+enum {
+ MGCP_PROTO_RTP,
+ MGCP_PROTO_RTCP,
+};
+
+static void scheduled_from_osmux_tx_rtp_cb(struct msgb *msg, void *data)
{
- struct mgcp_endpoint *endp = data;
- struct mgcp_conn_rtp *conn_net = NULL;
- struct mgcp_conn_rtp *conn_bts = NULL;
-
- /* FIXME: Get rid of CONN_ID_XXX! */
- conn_bts = mgcp_conn_get_rtp(endp, CONN_ID_BTS);
- conn_net = mgcp_conn_get_rtp(endp, CONN_ID_NET);
- if (!conn_bts || !conn_net)
- return;
-
+ struct mgcp_conn_rtp *conn = data;
+ struct mgcp_endpoint *endp = conn->conn->endp;
struct sockaddr_in addr = {
- .sin_addr = conn_net->end.addr,
- .sin_port = conn_net->end.rtp_port,
- };
+ .sin_addr = conn->end.addr,
+ .sin_port = conn->end.rtp_port,
+ }; /* FIXME: not set/used in cb */
- rate_ctr_inc(&conn_bts->rate_ctr_group->ctr[RTP_PACKETS_TX_CTR]);
- rate_ctr_add(&conn_bts->rate_ctr_group->ctr[RTP_OCTETS_TX_CTR], msg->len);
- /* Send RTP data to NET */
- /* FIXME: Get rid of conn_bts and conn_net! */
- mgcp_send(endp, 1, &addr, (char *)msg->data, msg->len,
- conn_bts, conn_net);
- msgb_free(msg);
-}
-
-static void scheduled_tx_bts_cb(struct msgb *msg, void *data)
-{
- struct mgcp_endpoint *endp = data;
- struct mgcp_conn_rtp *conn_net = NULL;
- struct mgcp_conn_rtp *conn_bts = NULL;
-
- /* FIXME: Get rid of CONN_ID_XXX! */
- conn_bts = mgcp_conn_get_rtp(endp, CONN_ID_BTS);
- conn_net = mgcp_conn_get_rtp(endp, CONN_ID_NET);
- if (!conn_bts || !conn_net)
- return;
-
- struct sockaddr_in addr = {
- .sin_addr = conn_bts->end.addr,
- .sin_port = conn_bts->end.rtp_port,
- };
-
- rate_ctr_inc(&conn_net->rate_ctr_group->ctr[RTP_PACKETS_TX_CTR]);
- rate_ctr_add(&conn_net->rate_ctr_group->ctr[RTP_OCTETS_TX_CTR], msg->len);
-
- /* Send RTP data to BTS */
- /* FIXME: Get rid of conn_bts and conn_net! */
- mgcp_send(endp, 1, &addr, (char *)msg->data, msg->len,
- conn_net, conn_bts);
+ endp->type->dispatch_rtp_cb(MGCP_PROTO_RTP, &addr, (char *)msg->data, msg->len, conn->conn);
msgb_free(msg);
}
@@ -361,16 +310,40 @@
return 0;
}
+/* This is called from the bsc-nat */
+static int osmux_handle_dummy(struct mgcp_config *cfg, struct sockaddr_in *addr,
+ struct msgb *msg)
+{
+ uint8_t osmux_cid;
+ struct mgcp_conn_rtp *conn;
+
+ if (osmux_legacy_dummy_parse_cid(addr, msg, &osmux_cid) < 0)
+ goto out;
+
+ conn = osmux_conn_lookup(cfg, osmux_cid, &addr->sin_addr);
+ if (!conn) {
+ LOGP(DLMGCP, LOGL_ERROR,
+ "Cannot find conn for Osmux CID %d\n", osmux_cid);
+ goto out;
+ }
+
+ endp_osmux_state_check(conn->conn->endp, conn, false);
+ /* Only needed to punch hole in firewall, it can be dropped */
+out:
+ msgb_free(msg);
+ return 0;
+}
+
#define osmux_chunk_length(msg, rem) (rem - msg->len);
-int osmux_read_from_bsc_nat_cb(struct osmo_fd *ofd, unsigned int what)
+static int osmux_read_fd_cb(struct osmo_fd *ofd, unsigned int what)
{
struct msgb *msg;
struct osmux_hdr *osmuxh;
struct sockaddr_in addr;
struct mgcp_config *cfg = ofd->data;
uint32_t rem;
- struct mgcp_conn_rtp *conn_bts = NULL;
+ struct mgcp_conn_rtp *conn_src;
msg = osmux_recv(ofd, &addr);
if (!msg)
@@ -384,115 +357,32 @@
/* not any further processing dummy messages */
if (msg->data[0] == MGCP_DUMMY_LOAD)
- goto out;
+ return osmux_handle_dummy(cfg, &addr, msg);
rem = msg->len;
while((osmuxh = osmux_xfrm_output_pull(msg)) != NULL) {
- struct mgcp_endpoint *endp;
- /* Yes, we use MGCP_DEST_NET to locate the origin */
- endp = endpoint_lookup(cfg, osmuxh->circuit_id,
- &addr.sin_addr, MGCP_DEST_NET);
-
- /* FIXME: Get rid of CONN_ID_XXX! */
- conn_bts = mgcp_conn_get_rtp(endp, CONN_ID_BTS);
- if (!conn_bts)
- continue;
-
- if (!endp) {
+ conn_src = osmux_conn_lookup(cfg, osmuxh->circuit_id,
+ &addr.sin_addr);
+ if (!conn_src) {
LOGP(DLMGCP, LOGL_ERROR,
- "Cannot find an endpoint for circuit_id=%d\n",
+ "Cannot find a src conn for circuit_id=%d\n",
osmuxh->circuit_id);
goto out;
}
- if (endp_osmux_state_check(endp, conn_bts, false) == 0) {
- conn_bts->osmux.stats.octets += osmux_chunk_length(msg, rem);
- conn_bts->osmux.stats.chunks++;
- osmux_xfrm_output_sched(&conn_bts->osmux.out, osmuxh);
- }
- rem = msg->len;
- }
-out:
- msgb_free(msg);
- return 0;
-}
-/* This is called from the bsc-nat */
-static int osmux_handle_dummy(struct mgcp_config *cfg, struct sockaddr_in *addr,
- struct msgb *msg, int endp_type)
-{
- struct mgcp_endpoint *endp;
- uint8_t osmux_cid;
- struct mgcp_conn_rtp *conn = NULL;
-
- if (osmux_legacy_dummy_parse_cid(addr, msg, &osmux_cid) < 0)
- goto out;
-
- endp = endpoint_lookup(cfg, osmux_cid, &addr->sin_addr, endp_type);
- if (!endp) {
- LOGP(DLMGCP, LOGL_ERROR,
- "Cannot find endpoint for Osmux CID %d\n", osmux_cid);
- goto out;
- }
-
- /* FIXME: Get rid of CONN_ID_XXX! */
- conn = mgcp_conn_get_rtp(endp, endp_type == MGCP_DEST_BTS ? CONN_ID_NET : CONN_ID_BTS);
- if (!conn)
- goto out;
-
- endp_osmux_state_check(endp, conn, false);
- /* Only needed to punch hole in firewall, it can be dropped */
-out:
- msgb_free(msg);
- return 0;
-}
-
-int osmux_read_from_bsc_cb(struct osmo_fd *ofd, unsigned int what)
-{
- struct msgb *msg;
- struct osmux_hdr *osmuxh;
- struct sockaddr_in addr;
- struct mgcp_config *cfg = ofd->data;
- uint32_t rem;
- struct mgcp_conn_rtp *conn_net = NULL;
-
- msg = osmux_recv(ofd, &addr);
- if (!msg)
- return -1;
-
- if (!cfg->osmux) {
- LOGP(DLMGCP, LOGL_ERROR,
- "bsc wants to use Osmux but bsc-nat did not request it\n");
- goto out;
- }
-
- /* not any further processing dummy messages */
- if (msg->data[0] == MGCP_DUMMY_LOAD)
- return osmux_handle_dummy(cfg, &addr, msg, MGCP_DEST_BTS);
-
- rem = msg->len;
- while((osmuxh = osmux_xfrm_output_pull(msg)) != NULL) {
- struct mgcp_endpoint *endp;
-
- /* Yes, we use MGCP_DEST_BTS to locate the origin */
- endp = endpoint_lookup(cfg, osmuxh->circuit_id,
- &addr.sin_addr, MGCP_DEST_BTS);
-
- /* FIXME: Get rid of CONN_ID_XXX! */
- conn_net = mgcp_conn_get_rtp(endp, CONN_ID_NET);
- if (!conn_net)
- continue;
-
- if (!endp) {
+ /*conn_dst = mgcp_find_dst_conn(conn_src->conn);
+ if (!conn_dst) {
LOGP(DLMGCP, LOGL_ERROR,
- "Cannot find an endpoint for circuit_id=%d\n",
+ "Cannot find a dst conn for circuit_id=%d\n",
osmuxh->circuit_id);
goto out;
- }
- if (endp_osmux_state_check(endp, conn_net, false) == 0) {
- conn_net->osmux.stats.octets += osmux_chunk_length(msg, rem);
- conn_net->osmux.stats.chunks++;
- osmux_xfrm_output_sched(&conn_net->osmux.out, osmuxh);
+ }*/
+
+ if (endp_osmux_state_check(conn_src->conn->endp, conn_src, false) == 0) {
+ conn_src->osmux.stats.octets += osmux_chunk_length(msg, rem);
+ conn_src->osmux.stats.chunks++;
+ osmux_xfrm_output_sched(&conn_src->osmux.out, osmuxh);
}
rem = msg->len;
}
@@ -505,17 +395,7 @@
{
int ret;
- switch(role) {
- case OSMUX_ROLE_BSC:
- osmux_fd.cb = osmux_read_from_bsc_nat_cb;
- break;
- case OSMUX_ROLE_BSC_NAT:
- osmux_fd.cb = osmux_read_from_bsc_cb;
- break;
- default:
- LOGP(DLMGCP, LOGL_ERROR, "wrong role for OSMUX\n");
- return -1;
- }
+ osmux_fd.cb = osmux_read_fd_cb;
osmux_fd.data = cfg;
ret = mgcp_create_bind(cfg->osmux_addr, &osmux_fd, cfg->osmux_port);
@@ -596,18 +476,8 @@
(conn->osmux.cid * rtp_ssrc_winlen) +
(random() % rtp_ssrc_winlen));
- switch (endp->cfg->role) {
- case MGCP_BSC_NAT:
- conn->type = MGCP_OSMUX_BSC_NAT;
- osmux_xfrm_output_set_tx_cb(&conn->osmux.out,
- scheduled_tx_net_cb, endp);
- break;
- case MGCP_BSC:
- conn->type = MGCP_OSMUX_BSC;
- osmux_xfrm_output_set_tx_cb(&conn->osmux.out,
- scheduled_tx_bts_cb, endp);
- break;
- }
+ osmux_xfrm_output_set_tx_cb(&conn->osmux.out,
+ scheduled_from_osmux_tx_rtp_cb, conn);
conn->osmux.state = OSMUX_STATE_ENABLED;
--
To view, visit https://gerrit.osmocom.org/14036
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-mgw
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I60b6ba3ffdc74efff945ba13a0b736798bdf5d8c
Gerrit-Change-Number: 14036
Gerrit-PatchSet: 1
Gerrit-Owner: Pau Espin Pedrol <pespin at sysmocom.de>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190513/5afa5e4b/attachment.htm>