This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
daniel gerrit-no-reply at lists.osmocom.orgdaniel has uploaded this change for review. ( https://gerrit.osmocom.org/c/libosmo-sccp/+/14519
Change subject: manuals: Update vty documentation
......................................................................
manuals: Update vty documentation
Related: OS#1700
Change-Id: I2061d7883f5457ec8c53358dc6089daaf60c67c3
---
M doc/manuals/vty/osmo-stp_vty_reference.xml
1 file changed, 246 insertions(+), 5 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/libosmo-sccp refs/changes/19/14519/1
diff --git a/doc/manuals/vty/osmo-stp_vty_reference.xml b/doc/manuals/vty/osmo-stp_vty_reference.xml
index 308c369..9a26316 100644
--- a/doc/manuals/vty/osmo-stp_vty_reference.xml
+++ b/doc/manuals/vty/osmo-stp_vty_reference.xml
@@ -187,7 +187,7 @@
<param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
- <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
+ <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
@@ -209,6 +209,7 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+ <param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -261,6 +262,35 @@
<param name='alarms' doc='Show current logging configuration' />
</params>
</command>
+ <command id='show stats'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='stats' doc='Show statistical values' />
+ </params>
+ </command>
+ <command id='show stats level (global|peer|subscriber)'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='stats' doc='Show statistical values' />
+ <param name='level' doc='Set the maximum group level' />
+ <param name='global' doc='Show global groups only' />
+ <param name='peer' doc='Show global and network peer related groups' />
+ <param name='subscriber' doc='Show global, peer, and subscriber groups' />
+ </params>
+ </command>
+ <command id='show asciidoc counters'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='asciidoc' doc='Asciidoc generation' />
+ <param name='counters' doc='Generate table of all registered counters' />
+ </params>
+ </command>
+ <command id='show rate-counters'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='rate-counters' doc='Show all rate counters' />
+ </params>
+ </command>
<command id='show cs7 instance <0-15> users'>
<params>
<param name='show' doc='Show running system information' />
@@ -390,6 +420,43 @@
<param name='all' doc='Display a list of all FSM instances of all finite state machine' />
</params>
</command>
+ <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='talloc-context' doc='Show talloc memory hierarchy' />
+ <param name='application' doc='Application's context' />
+ <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
+ <param name='full' doc='Display a full talloc memory hierarchy' />
+ <param name='brief' doc='Display a brief talloc memory hierarchy' />
+ <param name='DEPTH' doc='Specify required maximal depth value' />
+ </params>
+ </command>
+ <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='talloc-context' doc='Show talloc memory hierarchy' />
+ <param name='application' doc='Application's context' />
+ <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
+ <param name='full' doc='Display a full talloc memory hierarchy' />
+ <param name='brief' doc='Display a brief talloc memory hierarchy' />
+ <param name='DEPTH' doc='Specify required maximal depth value' />
+ <param name='tree' doc='Display only a specific memory chunk' />
+ <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
+ </params>
+ </command>
+ <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='talloc-context' doc='Show talloc memory hierarchy' />
+ <param name='application' doc='Application's context' />
+ <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
+ <param name='full' doc='Display a full talloc memory hierarchy' />
+ <param name='brief' doc='Display a brief talloc memory hierarchy' />
+ <param name='DEPTH' doc='Specify required maximal depth value' />
+ <param name='filter' doc='Filter chunks using regular expression' />
+ <param name='REGEXP' doc='Regular expression' />
+ </params>
+ </command>
</node>
<node id='enable'>
<name>enable</name>
@@ -558,7 +625,7 @@
<param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
- <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
+ <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
@@ -580,6 +647,7 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+ <param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -632,6 +700,35 @@
<param name='alarms' doc='Show current logging configuration' />
</params>
</command>
+ <command id='show stats'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='stats' doc='Show statistical values' />
+ </params>
+ </command>
+ <command id='show stats level (global|peer|subscriber)'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='stats' doc='Show statistical values' />
+ <param name='level' doc='Set the maximum group level' />
+ <param name='global' doc='Show global groups only' />
+ <param name='peer' doc='Show global and network peer related groups' />
+ <param name='subscriber' doc='Show global, peer, and subscriber groups' />
+ </params>
+ </command>
+ <command id='show asciidoc counters'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='asciidoc' doc='Asciidoc generation' />
+ <param name='counters' doc='Generate table of all registered counters' />
+ </params>
+ </command>
+ <command id='show rate-counters'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='rate-counters' doc='Show all rate counters' />
+ </params>
+ </command>
<command id='show cs7 instance <0-15> users'>
<params>
<param name='show' doc='Show running system information' />
@@ -761,6 +858,43 @@
<param name='all' doc='Display a list of all FSM instances of all finite state machine' />
</params>
</command>
+ <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='talloc-context' doc='Show talloc memory hierarchy' />
+ <param name='application' doc='Application's context' />
+ <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
+ <param name='full' doc='Display a full talloc memory hierarchy' />
+ <param name='brief' doc='Display a brief talloc memory hierarchy' />
+ <param name='DEPTH' doc='Specify required maximal depth value' />
+ </params>
+ </command>
+ <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='talloc-context' doc='Show talloc memory hierarchy' />
+ <param name='application' doc='Application's context' />
+ <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
+ <param name='full' doc='Display a full talloc memory hierarchy' />
+ <param name='brief' doc='Display a brief talloc memory hierarchy' />
+ <param name='DEPTH' doc='Specify required maximal depth value' />
+ <param name='tree' doc='Display only a specific memory chunk' />
+ <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
+ </params>
+ </command>
+ <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='talloc-context' doc='Show talloc memory hierarchy' />
+ <param name='application' doc='Application's context' />
+ <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
+ <param name='full' doc='Display a full talloc memory hierarchy' />
+ <param name='brief' doc='Display a brief talloc memory hierarchy' />
+ <param name='DEPTH' doc='Specify required maximal depth value' />
+ <param name='filter' doc='Filter chunks using regular expression' />
+ <param name='REGEXP' doc='Regular expression' />
+ </params>
+ </command>
</node>
<node id='config'>
<name>config</name>
@@ -955,6 +1089,43 @@
<param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
</params>
</command>
+ <command id='stats reporter statsd'>
+ <params>
+ <param name='stats' doc='Configure stats sub-system' />
+ <param name='reporter' doc='Configure a stats reporter' />
+ <param name='statsd' doc='Report to a STATSD server' />
+ </params>
+ </command>
+ <command id='no stats reporter statsd'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='stats' doc='Configure stats sub-system' />
+ <param name='reporter' doc='Configure a stats reporter' />
+ <param name='statsd' doc='Report to a STATSD server' />
+ </params>
+ </command>
+ <command id='stats reporter log'>
+ <params>
+ <param name='stats' doc='Configure stats sub-system' />
+ <param name='reporter' doc='Configure a stats reporter' />
+ <param name='log' doc='Report to the logger' />
+ </params>
+ </command>
+ <command id='no stats reporter log'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='stats' doc='Configure stats sub-system' />
+ <param name='reporter' doc='Configure a stats reporter' />
+ <param name='log' doc='Report to the logger' />
+ </params>
+ </command>
+ <command id='stats interval <1-65535>'>
+ <params>
+ <param name='stats' doc='Configure stats sub-system' />
+ <param name='interval' doc='Set the reporting interval' />
+ <param name='<1-65535>' doc='Interval in seconds' />
+ </params>
+ </command>
<command id='cs7 instance <0-15>'>
<params>
<param name='cs7' doc='ITU-T Signaling System 7' />
@@ -1037,7 +1208,7 @@
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
- <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
+ <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
@@ -1059,6 +1230,7 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+ <param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -1099,6 +1271,75 @@
</params>
</command>
</node>
+ <node id='config-stats'>
+ <name>config-stats</name>
+ <command id='local-ip ADDR'>
+ <params>
+ <param name='local-ip' doc='Set the IP address to which we bind locally' />
+ <param name='ADDR' doc='IP Address' />
+ </params>
+ </command>
+ <command id='no local-ip'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='local-ip' doc='Set the IP address to which we bind locally' />
+ </params>
+ </command>
+ <command id='remote-ip ADDR'>
+ <params>
+ <param name='remote-ip' doc='Set the remote IP address to which we connect' />
+ <param name='ADDR' doc='IP Address' />
+ </params>
+ </command>
+ <command id='remote-port <1-65535>'>
+ <params>
+ <param name='remote-port' doc='Set the remote port to which we connect' />
+ <param name='<1-65535>' doc='Remote port number' />
+ </params>
+ </command>
+ <command id='mtu <100-65535>'>
+ <params>
+ <param name='mtu' doc='Set the maximum packet size' />
+ <param name='<100-65535>' doc='Size in byte' />
+ </params>
+ </command>
+ <command id='no mtu'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='mtu' doc='Set the maximum packet size' />
+ </params>
+ </command>
+ <command id='prefix PREFIX'>
+ <params>
+ <param name='prefix' doc='Set the item name prefix' />
+ <param name='PREFIX' doc='The prefix string' />
+ </params>
+ </command>
+ <command id='no prefix'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='prefix' doc='Set the item name prefix' />
+ </params>
+ </command>
+ <command id='level (global|peer|subscriber)'>
+ <params>
+ <param name='level' doc='Set the maximum group level' />
+ <param name='global' doc='Report global groups only' />
+ <param name='peer' doc='Report global and network peer related groups' />
+ <param name='subscriber' doc='Report global, peer, and subscriber groups' />
+ </params>
+ </command>
+ <command id='enable'>
+ <params>
+ <param name='enable' doc='Enable the reporter' />
+ </params>
+ </command>
+ <command id='disable'>
+ <params>
+ <param name='disable' doc='Disable the reporter' />
+ </params>
+ </command>
+ </node>
<node id='config-line'>
<name>config-line</name>
<command id='login'>
@@ -1112,10 +1353,11 @@
<param name='login' doc='Enable password checking' />
</params>
</command>
- <command id='bind A.B.C.D'>
+ <command id='bind A.B.C.D [<0-65535>]'>
<params>
<param name='bind' doc='Accept VTY telnet connections on local interface' />
<param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
+ <param name='[<0-65535>]' doc='Local TCP port number' />
</params>
</command>
</node>
@@ -1438,7 +1680,6 @@
<param name='[qos-class' doc='Priority' />
<param name='CLASS' doc='Specify QoS Class' />
<param name='default' doc='QoS Class' />
- <param name=']' doc='Default QoS Class' />
</params>
</command>
<command id='remove route POINT_CODE MASK'>
--
To view, visit https://gerrit.osmocom.org/c/libosmo-sccp/+/14519
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmo-sccp
Gerrit-Branch: master
Gerrit-Change-Id: I2061d7883f5457ec8c53358dc6089daaf60c67c3
Gerrit-Change-Number: 14519
Gerrit-PatchSet: 1
Gerrit-Owner: daniel <dwillmann at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190619/42655d26/attachment.htm>