Change in ...osmo-bsc[master]: manuals: Update generated VTY reference and counters

laforge gerrit-no-reply at lists.osmocom.org
Thu Jun 6 19:42:32 UTC 2019


laforge has submitted this change and it was merged. ( https://gerrit.osmocom.org/c/osmo-bsc/+/14388 )

Change subject: manuals: Update generated VTY reference and counters
......................................................................

manuals: Update generated VTY reference and counters

Change-Id: I9f75edf2e5b88ef8f4592fa89548f32e0a7df8d8
Related: OS#1700
---
M doc/manuals/chapters/counters_generated.adoc
M doc/manuals/osmobsc-vty-reference.xml
M doc/manuals/vty/bsc_vty_reference.xml
3 files changed, 286 insertions(+), 97 deletions(-)

Approvals:
  Jenkins Builder: Verified
  pespin: Looks good to me, approved
  laforge: Looks good to me, approved



diff --git a/doc/manuals/chapters/counters_generated.adoc b/doc/manuals/chapters/counters_generated.adoc
index d55df07..65f4ca4 100644
--- a/doc/manuals/chapters/counters_generated.adoc
+++ b/doc/manuals/chapters/counters_generated.adoc
@@ -1,7 +1,88 @@
+
 // autogenerated by show asciidoc counters
-These counters and their description based on OsmoBSC (OsmoBSC).
+These counters and their description based on OsmoBSC 1.4.0.84-3f1f8 (OsmoBSC).
+
+=== Rate Counters
 
 // generating tables for rate_ctr_group
+// rate_ctr_group table base transceiver station
+.bts - base transceiver station
+[options="header"]
+|===
+| Name | Reference | Description
+| chreq:total | <<bts_chreq:total>> | Received channel requests.
+| chreq:no_channel | <<bts_chreq:no_channel>> | Sent to MS no channel available.
+| chan:rf_fail | <<bts_chan:rf_fail>> | Received a RF failure indication from BTS.
+| chan:rll_err | <<bts_chan:rll_err>> | Received a RLL failure with T200 cause from BTS.
+| oml_fail | <<bts_oml_fail>> | Received a TEI down on a OML link.
+| rsl_fail | <<bts_rsl_fail>> | Received a TEI down on a OML link.
+| codec:amr_f | <<bts_codec:amr_f>> | Count the usage of AMR/F codec by channel mode requested.
+| codec:amr_h | <<bts_codec:amr_h>> | Count the usage of AMR/H codec by channel mode requested.
+| codec:efr | <<bts_codec:efr>> | Count the usage of EFR codec by channel mode requested.
+| codec:fr | <<bts_codec:fr>> | Count the usage of FR codec by channel mode requested.
+| codec:hr | <<bts_codec:hr>> | Count the usage of HR codec by channel mode requested.
+| paging:attempted | <<bts_paging:attempted>> | Paging attempts for a subscriber.
+| paging:already | <<bts_paging:already>> | Paging attempts ignored as subsciber was already being paged.
+| paging:responded | <<bts_paging:responded>> | Paging attempts with successful paging response.
+| paging:expired | <<bts_paging:expired>> | Paging Request expired because of timeout T3113.
+| chan_act:total | <<bts_chan_act:total>> | Total number of Channel Activations.
+| chan_act:nack | <<bts_chan_act:nack>> | Number of Channel Activations that the BTS NACKed
+| rsl:unknown | <<bts_rsl:unknown>> | Number of unknown/unsupported RSL messages received from BTS
+| rsl:ipa_nack | <<bts_rsl:ipa_nack>> | Number of IPA (RTP/dyn-PDCH) related NACKs received from BTS
+| chan:mode_modify_nack | <<bts_chan:mode_modify_nack>> | Number of Channel Mode Modify NACKs received from BTS
+|===
+// rate_ctr_group table base transceiver station
+.bts - base transceiver station
+[options="header"]
+|===
+| Name | Reference | Description
+| chreq:total | <<bts_chreq:total>> | Received channel requests.
+| chreq:no_channel | <<bts_chreq:no_channel>> | Sent to MS no channel available.
+| chan:rf_fail | <<bts_chan:rf_fail>> | Received a RF failure indication from BTS.
+| chan:rll_err | <<bts_chan:rll_err>> | Received a RLL failure with T200 cause from BTS.
+| oml_fail | <<bts_oml_fail>> | Received a TEI down on a OML link.
+| rsl_fail | <<bts_rsl_fail>> | Received a TEI down on a OML link.
+| codec:amr_f | <<bts_codec:amr_f>> | Count the usage of AMR/F codec by channel mode requested.
+| codec:amr_h | <<bts_codec:amr_h>> | Count the usage of AMR/H codec by channel mode requested.
+| codec:efr | <<bts_codec:efr>> | Count the usage of EFR codec by channel mode requested.
+| codec:fr | <<bts_codec:fr>> | Count the usage of FR codec by channel mode requested.
+| codec:hr | <<bts_codec:hr>> | Count the usage of HR codec by channel mode requested.
+| paging:attempted | <<bts_paging:attempted>> | Paging attempts for a subscriber.
+| paging:already | <<bts_paging:already>> | Paging attempts ignored as subsciber was already being paged.
+| paging:responded | <<bts_paging:responded>> | Paging attempts with successful paging response.
+| paging:expired | <<bts_paging:expired>> | Paging Request expired because of timeout T3113.
+| chan_act:total | <<bts_chan_act:total>> | Total number of Channel Activations.
+| chan_act:nack | <<bts_chan_act:nack>> | Number of Channel Activations that the BTS NACKed
+| rsl:unknown | <<bts_rsl:unknown>> | Number of unknown/unsupported RSL messages received from BTS
+| rsl:ipa_nack | <<bts_rsl:ipa_nack>> | Number of IPA (RTP/dyn-PDCH) related NACKs received from BTS
+| chan:mode_modify_nack | <<bts_chan:mode_modify_nack>> | Number of Channel Mode Modify NACKs received from BTS
+|===
+// rate_ctr_group table base transceiver station
+.bts - base transceiver station
+[options="header"]
+|===
+| Name | Reference | Description
+| chreq:total | <<bts_chreq:total>> | Received channel requests.
+| chreq:no_channel | <<bts_chreq:no_channel>> | Sent to MS no channel available.
+| chan:rf_fail | <<bts_chan:rf_fail>> | Received a RF failure indication from BTS.
+| chan:rll_err | <<bts_chan:rll_err>> | Received a RLL failure with T200 cause from BTS.
+| oml_fail | <<bts_oml_fail>> | Received a TEI down on a OML link.
+| rsl_fail | <<bts_rsl_fail>> | Received a TEI down on a OML link.
+| codec:amr_f | <<bts_codec:amr_f>> | Count the usage of AMR/F codec by channel mode requested.
+| codec:amr_h | <<bts_codec:amr_h>> | Count the usage of AMR/H codec by channel mode requested.
+| codec:efr | <<bts_codec:efr>> | Count the usage of EFR codec by channel mode requested.
+| codec:fr | <<bts_codec:fr>> | Count the usage of FR codec by channel mode requested.
+| codec:hr | <<bts_codec:hr>> | Count the usage of HR codec by channel mode requested.
+| paging:attempted | <<bts_paging:attempted>> | Paging attempts for a subscriber.
+| paging:already | <<bts_paging:already>> | Paging attempts ignored as subsciber was already being paged.
+| paging:responded | <<bts_paging:responded>> | Paging attempts with successful paging response.
+| paging:expired | <<bts_paging:expired>> | Paging Request expired because of timeout T3113.
+| chan_act:total | <<bts_chan_act:total>> | Total number of Channel Activations.
+| chan_act:nack | <<bts_chan_act:nack>> | Number of Channel Activations that the BTS NACKed
+| rsl:unknown | <<bts_rsl:unknown>> | Number of unknown/unsupported RSL messages received from BTS
+| rsl:ipa_nack | <<bts_rsl:ipa_nack>> | Number of IPA (RTP/dyn-PDCH) related NACKs received from BTS
+| chan:mode_modify_nack | <<bts_chan:mode_modify_nack>> | Number of Channel Mode Modify NACKs received from BTS
+|===
 // rate_ctr_group table E1 Input subsystem
 .e1inp - E1 Input subsystem 
 [options="header"]
@@ -18,59 +99,74 @@
 [options="header"]
 |===
 | Name | Reference | Description
-| chreq:total | <<bsc_chreq:total>> | Received channel requests.
-| chreq:no_channel | <<bsc_chreq:no_channel>> | Sent to MS no channel available.
-| handover:attempted | <<bsc_handover:attempted>> | Received handover attempts.
-| handover:no_channel | <<bsc_handover:no_channel>> | Sent no channel available responses.
-| handover:timeout | <<bsc_handover:timeout>> | Count the amount of timeouts of timer T3103.
-| handover:completed | <<bsc_handover:completed>> | Received handover completed.
-| handover:failed | <<bsc_handover:failed>> | Receive HO FAIL messages.
-| paging:attempted | <<bsc_paging:attempted>> | Paging attempts for a MS.
-| paging:detached | <<bsc_paging:detached>> | Counts the amount of paging attempts which couldn't sent out any paging request because no responsible bts found.
-| paging:completed | <<bsc_paging:completed>> | Paging successful completed.
-| paging:expired | <<bsc_paging:expired>> | Paging Request expired because of timeout T3113.
-| chan:rf_fail | <<bsc_chan:rf_fail>> | Received a RF failure indication from BTS.
-| chan:rll_err | <<bsc_chan:rll_err>> | Received a RLL failure with T200 cause from BTS.
-| bts:oml_fail | <<bsc_bts:oml_fail>> | Received a TEI down on a OML link.
-| bts:rsl_fail | <<bsc_bts:rsl_fail>> | Received a TEI down on a OML link.
-| bts:codec_amr_f | <<bsc_bts:codec_amr_f>> | Count the usage of AMR/F codec by channel mode requested.
-| bts:codec_amr_h | <<bsc_bts:codec_amr_h>> | Count the usage of AMR/H codec by channel mode requested.
-| bts:codec_efr | <<bsc_bts:codec_efr>> | Count the usage of EFR codec by channel mode requested.
-| bts:codec_fr | <<bsc_bts:codec_fr>> | Count the usage of FR codec by channel mode requested.
-| bts:codec_hr | <<bsc_bts:codec_hr>> | Count the usage of HR codec by channel mode requested.
+| assignment:attempted | <<bsc_assignment:attempted>> | Assignment attempts.
+| assignment:completed | <<bsc_assignment:completed>> | Assignment completed.
+| assignment:stopped | <<bsc_assignment:stopped>> | Connection ended during Assignment.
+| assignment:no_channel | <<bsc_assignment:no_channel>> | Failure to allocate lchan for Assignment.
+| assignment:timeout | <<bsc_assignment:timeout>> | Assignment timed out.
+| assignment:failed | <<bsc_assignment:failed>> | Received Assignment Failure message.
+| assignment:error | <<bsc_assignment:error>> | Assigment failed for other reason.
+| handover:attempted | <<bsc_handover:attempted>> | Intra-BSC handover attempts.
+| handover:completed | <<bsc_handover:completed>> | Intra-BSC handover completed.
+| handover:stopped | <<bsc_handover:stopped>> | Connection ended during HO.
+| handover:no_channel | <<bsc_handover:no_channel>> | Failure to allocate lchan for HO.
+| handover:timeout | <<bsc_handover:timeout>> | Handover timed out.
+| handover:failed | <<bsc_handover:failed>> | Received Handover Fail messages.
+| handover:error | <<bsc_handover:error>> | Re-assigment failed for other reason.
+| interbsc_ho_out:attempted | <<bsc_interbsc_ho_out:attempted>> | Attempts to handover to remote BSS.
+| interbsc_ho_out:completed | <<bsc_interbsc_ho_out:completed>> | Handover to remote BSS completed.
+| interbsc_ho_out:stopped | <<bsc_interbsc_ho_out:stopped>> | Connection ended during HO.
+| interbsc_ho_out:timeout | <<bsc_interbsc_ho_out:timeout>> | Handover timed out.
+| interbsc_ho_out:error | <<bsc_interbsc_ho_out:error>> | Handover to remote BSS failed for other reason.
+| interbsc_ho_in:attempted | <<bsc_interbsc_ho_in:attempted>> | Attempts to handover from remote BSS.
+| interbsc_ho_in:completed | <<bsc_interbsc_ho_in:completed>> | Handover from remote BSS completed.
+| interbsc_ho_in:stopped | <<bsc_interbsc_ho_in:stopped>> | Connection ended during HO.
+| interbsc_ho_in:no_channel | <<bsc_interbsc_ho_in:no_channel>> | Failure to allocate lchan for HO.
+| interbsc_ho_in:failed | <<bsc_interbsc_ho_in:failed>> | Received Handover Fail message.
+| interbsc_ho_in:timeout | <<bsc_interbsc_ho_in:timeout>> | Handover from remote BSS timed out.
+| interbsc_ho_in:error | <<bsc_interbsc_ho_in:error>> | Handover from remote BSS failed for other reason.
+| paging:attempted | <<bsc_paging:attempted>> | Paging attempts for a subscriber.
+| paging:detached | <<bsc_paging:detached>> | Paging request send failures because no responsible BTS was found.
+| paging:responded | <<bsc_paging:responded>> | Paging attempts with successful response.
+| abis:unknown_unit_id | <<bsc_abis:unknown_unit_id>> | Connection attempts from unknown IPA CCM Unit ID.
 |===
-// rate_ctr_group table mobile switching center
-.msc - mobile switching center 
-[options="header"]
-|===
-| Name | Reference | Description
-| loc_update_type:attach | <<msc_loc_update_type:attach>> | Received location update imsi attach requests.
-| loc_update_type:normal | <<msc_loc_update_type:normal>> | Received location update normal requests.
-| loc_update_type:periodic | <<msc_loc_update_type:periodic>> | Received location update periodic requests.
-| loc_update_type:detach | <<msc_loc_update_type:detach>> | Received location update detach indication.
-| loc_update_resp:failed | <<msc_loc_update_resp:failed>> | Rejected location updates.
-| loc_update_resp:completed | <<msc_loc_update_resp:completed>> | Successful location updates.
-| sms:submitted | <<msc_sms:submitted>> | Received a RPDU from a MS (MO).
-| sms:no_receiver | <<msc_sms:no_receiver>> | Counts SMS which couldn't routed because no receiver found.
-| sms:delivered | <<msc_sms:delivered>> | Global SMS Deliver attempts.
-| sms:rp_err_mem | <<msc_sms:rp_err_mem>> | CAUSE_MT_MEM_EXCEEDED errors of MS responses on a sms deliver attempt.
-| sms:rp_err_other | <<msc_sms:rp_err_other>> | Other error of MS responses on a sms delive attempt.
-| sms:deliver_unknown_error | <<msc_sms:deliver_unknown_error>> | Unknown error occured during sms delivery.
-| call:mo_setup | <<msc_call:mo_setup>> | Received setup requests from a MS to init a MO call.
-| call:mo_connect_ack | <<msc_call:mo_connect_ack>> | Received a connect ack from MS of a MO call. Call is now succesful connected up.
-| call:mt_setup | <<msc_call:mt_setup>> | Sent setup requests to the MS (MT).
-| call:mt_connect | <<msc_call:mt_connect>> | Sent a connect to the MS (MT).
-| call:active | <<msc_call:active>> | Count total amount of calls that ever reached active state.
-| call:complete | <<msc_call:complete>> | Count total amount of calls which got terminated by disconnect req or ind after reaching active state.
-| call:incomplete | <<msc_call:incomplete>> | Count total amount of call which got terminated by any other reason after reaching active state.
-|===
-// generating tables for osmo_stat_items
-// generating tables for osmo_counters
-// ungrouped osmo_counters
-.ungrouped osmo counters
-[options="header"]
-|===
-| Name | Reference | Description
-| msc.active_calls | <<ungroup_counter_msc.active_calls>> | 
-|===
+== Osmo Stat Items
 
+// generating tables for osmo_stat_items
+base transceiver station
+// osmo_stat_item_group table base transceiver station
+.bts - base transceiver station
+[options="header"]
+|===
+| Name | Reference | Description | Unit
+| chanloadavg | <<bts_chanloadavg>> | Channel load average. | %
+| T3122 | <<bts_T3122>> | T3122 IMMEDIATE ASSIGNMENT REJECT wait indicator. | s
+| rach_busy | <<bts_rach_busy>> | RACH slots with signal above threshold | %
+| rach_access | <<bts_rach_access>> | RACH slots with access bursts in them | %
+|===
+base transceiver station
+// osmo_stat_item_group table base transceiver station
+.bts - base transceiver station
+[options="header"]
+|===
+| Name | Reference | Description | Unit
+| chanloadavg | <<bts_chanloadavg>> | Channel load average. | %
+| T3122 | <<bts_T3122>> | T3122 IMMEDIATE ASSIGNMENT REJECT wait indicator. | s
+| rach_busy | <<bts_rach_busy>> | RACH slots with signal above threshold | %
+| rach_access | <<bts_rach_access>> | RACH slots with access bursts in them | %
+|===
+base transceiver station
+// osmo_stat_item_group table base transceiver station
+.bts - base transceiver station
+[options="header"]
+|===
+| Name | Reference | Description | Unit
+| chanloadavg | <<bts_chanloadavg>> | Channel load average. | %
+| T3122 | <<bts_T3122>> | T3122 IMMEDIATE ASSIGNMENT REJECT wait indicator. | s
+| rach_busy | <<bts_rach_busy>> | RACH slots with signal above threshold | %
+| rach_access | <<bts_rach_access>> | RACH slots with access bursts in them | %
+|===
+== Osmo Counters
+
+// generating tables for osmo_counters
+// there are no ungrouped osmo_counters
diff --git a/doc/manuals/osmobsc-vty-reference.xml b/doc/manuals/osmobsc-vty-reference.xml
index f51e56e..ec3022c 100644
--- a/doc/manuals/osmobsc-vty-reference.xml
+++ b/doc/manuals/osmobsc-vty-reference.xml
@@ -24,12 +24,18 @@
             <authorinitials>hf</authorinitials>
             <revremark>Update to match osmo-bsc version 0.13.0-305</revremark>
         </revision>
+        <revision>
+            <revnumber>v3</revnumber>
+            <date>6th June 2019</date>
+            <authorinitials>dw</authorinitials>
+            <revremark>Update to match osmo-bsc version 1.4.0.84-3f1f</revremark>
+        </revision>
     </revhistory>
 
     <title>OsmoBSC VTY Reference</title>
 
     <copyright>
-      <year>2012-2014</year>
+      <year>2012-2019</year>
     </copyright>
 
     <legalnotice>
diff --git a/doc/manuals/vty/bsc_vty_reference.xml b/doc/manuals/vty/bsc_vty_reference.xml
index f56b951..9992267 100644
--- a/doc/manuals/vty/bsc_vty_reference.xml
+++ b/doc/manuals/vty/bsc_vty_reference.xml
@@ -152,6 +152,14 @@
         <param name='[<0-255>]' doc='TRX Number' />
       </params>
     </command>
+    <command id='show trx (connected|disconnected)'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='trx' doc='Display information about a TRX' />
+        <param name='connected' doc='Show TRX with RSL connected' />
+        <param name='disconnected' doc='Show TRX with RSL disconnected' />
+      </params>
+    </command>
     <command id='show timeslot [<0-255>] [<0-255>] [<0-7>]'>
       <params>
         <param name='show' doc='Show running system information' />
@@ -175,13 +183,31 @@
       <params>
         <param name='show' doc='Show running system information' />
         <param name='lchan' doc='Display information about a logical channel' />
-        <param name='summary' doc='Short summary' />
+        <param name='summary' doc='Short summary (used lchans)' />
         <param name='[<0-255>]' doc='BTS Number' />
         <param name='[<0-255>]' doc='TRX Number' />
         <param name='[<0-7>]' doc='Timeslot Number' />
         <param name='[<0-7>]' doc='Logical Channel Number' />
       </params>
     </command>
+    <command id='show lchan summary-all [<0-255>] [<0-255>] [<0-7>] [<0-7>]'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='lchan' doc='Display information about a logical channel' />
+        <param name='summary-all' doc='Short summary (all lchans)' />
+        <param name='[<0-255>]' doc='BTS Number' />
+        <param name='[<0-255>]' doc='TRX Number' />
+        <param name='[<0-7>]' doc='Timeslot Number' />
+        <param name='[<0-7>]' doc='Logical Channel Number' />
+      </params>
+    </command>
+    <command id='show timer [TNNNN]'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='timer' doc='Show timers' />
+        <param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format '1234' or 'T1234' or 't1234'; Osmocom-specific timer number of the format: 'X1234' or 'x1234'.' />
+      </params>
+    </command>
     <command id='show conns'>
       <params>
         <param name='show' doc='Show running system information' />
@@ -294,7 +320,7 @@
         <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
       </params>
     </command>
-    <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
+    <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
       <params>
         <param name='logging' doc='Configure logging' />
         <param name='level' doc='Set the log level for a specified category' />
@@ -335,6 +361,7 @@
         <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
         <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
         <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+        <param name='lrspro' doc='Remote SIM protocol' />
         <param name='debug' doc='Log debug messages and higher levels' />
         <param name='info' doc='Log informational messages and higher levels' />
         <param name='notice' doc='Log noticeable messages and higher levels' />
@@ -424,13 +451,6 @@
         <param name='REGEXP' doc='Regular expression' />
       </params>
     </command>
-    <command id='show timer [TNNNN]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='timer' doc='GSM Timers' />
-        <param name='[TNNNN]' doc='Specific timer to show, or all timers if omitted.' />
-      </params>
-    </command>
     <command id='show bts <0-255> neighbor arfcn <0-1023> bsic (<0-63>|any)'>
       <params>
         <param name='show' doc='Show running system information' />
@@ -759,6 +779,14 @@
         <param name='[<0-255>]' doc='TRX Number' />
       </params>
     </command>
+    <command id='show trx (connected|disconnected)'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='trx' doc='Display information about a TRX' />
+        <param name='connected' doc='Show TRX with RSL connected' />
+        <param name='disconnected' doc='Show TRX with RSL disconnected' />
+      </params>
+    </command>
     <command id='show timeslot [<0-255>] [<0-255>] [<0-7>]'>
       <params>
         <param name='show' doc='Show running system information' />
@@ -782,13 +810,31 @@
       <params>
         <param name='show' doc='Show running system information' />
         <param name='lchan' doc='Display information about a logical channel' />
-        <param name='summary' doc='Short summary' />
+        <param name='summary' doc='Short summary (used lchans)' />
         <param name='[<0-255>]' doc='BTS Number' />
         <param name='[<0-255>]' doc='TRX Number' />
         <param name='[<0-7>]' doc='Timeslot Number' />
         <param name='[<0-7>]' doc='Logical Channel Number' />
       </params>
     </command>
+    <command id='show lchan summary-all [<0-255>] [<0-255>] [<0-7>] [<0-7>]'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='lchan' doc='Display information about a logical channel' />
+        <param name='summary-all' doc='Short summary (all lchans)' />
+        <param name='[<0-255>]' doc='BTS Number' />
+        <param name='[<0-255>]' doc='TRX Number' />
+        <param name='[<0-7>]' doc='Timeslot Number' />
+        <param name='[<0-7>]' doc='Logical Channel Number' />
+      </params>
+    </command>
+    <command id='show timer [TNNNN]'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='timer' doc='Show timers' />
+        <param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format '1234' or 'T1234' or 't1234'; Osmocom-specific timer number of the format: 'X1234' or 'x1234'.' />
+      </params>
+    </command>
     <command id='show conns'>
       <params>
         <param name='show' doc='Show running system information' />
@@ -925,7 +971,7 @@
         <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
       </params>
     </command>
-    <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
+    <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
       <params>
         <param name='logging' doc='Configure logging' />
         <param name='level' doc='Set the log level for a specified category' />
@@ -966,6 +1012,7 @@
         <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
         <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
         <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+        <param name='lrspro' doc='Remote SIM protocol' />
         <param name='debug' doc='Log debug messages and higher levels' />
         <param name='info' doc='Log informational messages and higher levels' />
         <param name='notice' doc='Log noticeable messages and higher levels' />
@@ -1055,13 +1102,6 @@
         <param name='REGEXP' doc='Regular expression' />
       </params>
     </command>
-    <command id='show timer [TNNNN]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='timer' doc='GSM Timers' />
-        <param name='[TNNNN]' doc='Specific timer to show, or all timers if omitted.' />
-      </params>
-    </command>
     <command id='show bts <0-255> neighbor arfcn <0-1023> bsic (<0-63>|any)'>
       <params>
         <param name='show' doc='Show running system information' />
@@ -1172,11 +1212,14 @@
         <param name='assignment' doc='Manually trigger assignment (for debugging)' />
       </params>
     </command>
-    <command id='bts <0-255> smscb-command <1-4> HEXSTRING'>
+    <command id='bts <0-255> smscb-command (normal|schedule|default) <1-4> HEXSTRING'>
       <params>
         <param name='bts' doc='BTS related commands' />
         <param name='<0-255>' doc='BTS Number' />
         <param name='smscb-command' doc='SMS Cell Broadcast' />
+        <param name='normal' doc='Normal (one-shot) SMSCB Message; sent once over Abis+Um' />
+        <param name='schedule' doc='Schedule (one-shot) SMSCB Messag; sent once over Abis+Um' />
+        <param name='default' doc='Default (repeating) SMSCB Message; sent once over Abis, unlimited ovrer Um' />
         <param name='<1-4>' doc='Last Valid Block' />
         <param name='HEXSTRING' doc='Hex Encoded SMSCB message (up to 88 octets)' />
       </params>
@@ -1790,7 +1833,7 @@
         <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
       </params>
     </command>
-    <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
+    <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
       <params>
         <param name='logging' doc='Configure logging' />
         <param name='level' doc='Set the log level for a specified category' />
@@ -1831,6 +1874,7 @@
         <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
         <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
         <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+        <param name='lrspro' doc='Remote SIM protocol' />
         <param name='debug' doc='Log debug messages and higher levels' />
         <param name='info' doc='Log informational messages and higher levels' />
         <param name='notice' doc='Log noticeable messages and higher levels' />
@@ -1961,10 +2005,11 @@
         <param name='login' doc='Enable password checking' />
       </params>
     </command>
-    <command id='bind A.B.C.D'>
+    <command id='bind A.B.C.D [<0-65535>]'>
       <params>
         <param name='bind' doc='Accept VTY telnet connections on local interface' />
         <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
+        <param name='[<0-65535>]' doc='Local TCP port number' />
       </params>
     </command>
   </node>
@@ -2470,12 +2515,12 @@
         <param name='NAME' doc='Name string, up to 31 characters' />
       </params>
     </command>
-    <command id='timer TNNNN (default|<1-65535>)'>
+    <command id='timer [TNNNN] [(<0-2147483647>|default)]'>
       <params>
-        <param name='timer' doc='Configure GSM Timers' />
-        <param name='TNNNN' doc='T-number, optionally preceded by 't' or 'T'.See also 'show timer' for a list of available timers.' />
-        <param name='default' doc='Set to default timer value' />
-        <param name='<1-65535>' doc='Timer value' />
+        <param name='timer' doc='Configure or show timers' />
+        <param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format '1234' or 'T1234' or 't1234'; Osmocom-specific timer number of the format: 'X1234' or 'x1234'.' />
+        <param name='[<0-2147483647>]' doc='New timer value' />
+        <param name='[default]' doc='Set to default timer value' />
       </params>
     </command>
     <command id='neci (0|1)'>
@@ -2960,6 +3005,13 @@
         <param name='<0-7>' doc='Number of blocks reserved for access grant' />
       </params>
     </command>
+    <command id='ccch load-indication-threshold <0-100>'>
+      <params>
+        <param name='ccch' doc='Common Control Channel' />
+        <param name='load-indication-threshold' doc='Percentage of CCCH load at which BTS sends RSL CCCH LOAD IND' />
+        <param name='<0-100>' doc='CCCH Load Threshold in percent (Default: 10)' />
+      </params>
+    </command>
     <command id='rach nm busy threshold <0-255>'>
       <params>
         <param name='rach' doc='Random Access Control Channel' />
@@ -3117,7 +3169,7 @@
         <param name='1' doc='Enable 11 bit RACH for EGPRS' />
       </params>
     </command>
-    <command id='gprs ns timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries) <0-255>'>
+    <command id='gprs ns timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries|tsns-prov) <0-255>'>
       <params>
         <param name='gprs' doc='GPRS Packet Network' />
         <param name='ns' doc='Network Service' />
@@ -3129,6 +3181,7 @@
         <param name='tns-test' doc='Test Timer (Tns-test) timeout' />
         <param name='tns-alive' doc='Alive Timer (Tns-alive) timeout' />
         <param name='tns-alive-retries' doc='Alive Timer (Tns-alive) number of retries' />
+        <param name='tsns-prov' doc='SNS Provision Timer (Tsns-prov) timeout' />
         <param name='<0-255>' doc='Timer Value' />
       </params>
     </command>
@@ -3301,6 +3354,19 @@
         <param name='HEXSTRING' doc='Static user-specified SI content in HEX notation' />
       </params>
     </command>
+    <command id='system-information unused-send-empty'>
+      <params>
+        <param name='system-information' doc='System Information Messages' />
+        <param name='unused-send-empty' doc='Send BCCH Info with empty 'Full BCCH Info' TLV to notify disabled SI. Some nanoBTS fw versions are known to fail upon receival of these messages.' />
+      </params>
+    </command>
+    <command id='no system-information unused-send-empty'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='system-information' doc='System Information Messages' />
+        <param name='unused-send-empty' doc='Avoid sending BCCH Info with empty 'Full BCCH Info' TLV to notify disabled SI. Some nanoBTS fw versions are known to fail upon receival of these messages.' />
+      </params>
+    </command>
     <command id='early-classmark-sending (allowed|forbidden)'>
       <params>
         <param name='early-classmark-sending' doc='Early Classmark Sending' />
@@ -3319,7 +3385,7 @@
       <params>
         <param name='neighbor-list' doc='Neighbor List' />
         <param name='mode' doc='Mode of Neighbor List generation' />
-        <param name='automatic' doc='Automatically from all BTS in this OpenBSC' />
+        <param name='automatic' doc='Automatically from all BTS in this BSC' />
         <param name='manual' doc='Manual' />
         <param name='manual-si5' doc='Manual with different lists for SI2 and SI5' />
       </params>
@@ -3868,6 +3934,19 @@
         <param name='<1-10>' doc='Set the number of Access Control Classes to enable per ramping step' />
       </params>
     </command>
+    <command id='timer-dynamic TNNNN'>
+      <params>
+        <param name='timer-dynamic' doc='Calculate T3113 dynamically based on channel config and load' />
+        <param name='TNNNN' doc='T-number, optionally preceded by 't' or 'T'' />
+      </params>
+    </command>
+    <command id='no timer-dynamic TNNNN'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='timer-dynamic' doc='Set given timer to non-dynamic and use the default or user provided fixed value' />
+        <param name='TNNNN' doc='T-number, optionally preceded by 't' or 'T'' />
+      </params>
+    </command>
     <command id='neighbor bts <0-255>'>
       <params>
         <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' />
@@ -4573,11 +4652,19 @@
         <param name='forbidden' doc='Forbidden' />
       </params>
     </command>
-    <command id='lcls-mode (disabled|mgw-loop)'>
+    <command id='amr-payload (octet-aligned|bandwith-efficient'>
+      <params>
+        <param name='amr-payload' doc='Set AMR payload framing mode' />
+        <param name='octet-aligned' doc='payload fields aligned on octet boundaries' />
+        <param name='bandwith-efficient' doc='payload fields packed (AoIP)' />
+      </params>
+    </command>
+    <command id='lcls-mode (disabled|mgw-loop|bts-loop)'>
       <params>
         <param name='lcls-mode' doc='Configure 3GPP LCLS (Local Call, Local Switch)' />
         <param name='disabled' doc='Disable LCLS for all calls of this MSC' />
-        <param name='mgw-loop' doc='Enable LCLS with loopping traffic in MGW' />
+        <param name='mgw-loop' doc='Enable LCLS with looping traffic in MGW' />
+        <param name='bts-loop' doc='Enable LCLS with looping traffic between BTS' />
       </params>
     </command>
     <command id='lcls-codec-mismatch (allowed|forbidden)'>
@@ -4647,19 +4734,11 @@
         <param name='<0-65535>' doc='remote port' />
       </params>
     </command>
-    <command id='mgw endpoint-range <1-65534> <1-65534>'>
+    <command id='mgw endpoint-domain NAME'>
       <params>
         <param name='mgw' doc='Configure MGCP connection to Media Gateway' />
-        <param name='endpoint-range' doc='usable range of endpoint identifiers' />
-        <param name='<1-65534>' doc='set first usable endpoint identifier' />
-        <param name='<1-65534>' doc='set last usable endpoint identifier' />
-      </params>
-    </command>
-    <command id='mgw bts-base <0-65534>'>
-      <params>
-        <param name='mgw' doc='Configure MGCP connection to Media Gateway' />
-        <param name='bts-base' doc='First UDP port allocated for the BTS side' />
-        <param name='<0-65534>' doc='UDP Port number' />
+        <param name='endpoint-domain' doc='Set the domain name to send in MGCP messages, e.g. the part 'foo' in 'rtpbridge/*@foo'.' />
+        <param name='NAME' doc='Domain name, should be alphanumeric.' />
       </params>
     </command>
     <command id='mgw x-osmo-ign call-id'>
@@ -4676,6 +4755,14 @@
         <param name='x-osmo-ign' doc='Do not send X-Osmo-IGN MGCP header to this MSC' />
       </params>
     </command>
+    <command id='osmux (on|off|only)'>
+      <params>
+        <param name='osmux' doc='RTP multiplexing' />
+        <param name='on' doc='Enable OSMUX' />
+        <param name='off' doc='Disable OSMUX' />
+        <param name='only' doc='Only use OSMUX' />
+      </params>
+    </command>
   </node>
   <node id='om2k'>
     <name>om2k</name>

-- 
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/14388
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: I9f75edf2e5b88ef8f4592fa89548f32e0a7df8d8
Gerrit-Change-Number: 14388
Gerrit-PatchSet: 1
Gerrit-Owner: daniel <dwillmann at sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann at sysmocom.de>
Gerrit-Reviewer: laforge <laforge at gnumonks.org>
Gerrit-Reviewer: osmith <osmith at sysmocom.de>
Gerrit-Reviewer: pespin <pespin at sysmocom.de>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190606/0e7751ef/attachment.html>


More information about the gerrit-log mailing list