This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has submitted this change and it was merged. ( https://gerrit.osmocom.org/c/osmo-sgsn/+/14377 )
Change subject: doc/manuals/vty: regenerate sgsn_vty_reference.xml
......................................................................
doc/manuals/vty: regenerate sgsn_vty_reference.xml
Change-Id: I3dfe3598055457cc9724a371590e676f1920652b
---
M doc/manuals/vty/sgsn_vty_reference.xml
1 file changed, 21 insertions(+), 7 deletions(-)
Approvals:
Jenkins Builder: Verified
Harald Welte: Looks good to me, approved
diff --git a/doc/manuals/vty/sgsn_vty_reference.xml b/doc/manuals/vty/sgsn_vty_reference.xml
index 52d4213..7619215 100644
--- a/doc/manuals/vty/sgsn_vty_reference.xml
+++ b/doc/manuals/vty/sgsn_vty_reference.xml
@@ -187,7 +187,7 @@
<param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
- <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
+ <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
@@ -222,6 +222,7 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+ <param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -733,7 +734,7 @@
<param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
- <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
+ <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
@@ -768,6 +769,7 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+ <param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -1488,7 +1490,8 @@
<param name='category' doc='Configure log message' />
<param name='0' doc='Don't prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem name' />
- </params> </command>
+ </params>
+ </command>
<command id='logging print category-hex (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
@@ -1518,7 +1521,7 @@
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
- <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
+ <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
@@ -1553,6 +1556,7 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+ <param name='lrspro' doc='Remote SIM protocol' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -1696,10 +1700,11 @@
<param name='login' doc='Enable password checking' />
</params>
</command>
- <command id='bind A.B.C.D'>
+ <command id='bind A.B.C.D [<0-65535>]'>
<params>
<param name='bind' doc='Accept VTY telnet connections on local interface' />
<param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
+ <param name='[<0-65535>]' doc='Local TCP port number' />
</params>
</command>
</node>
@@ -1762,7 +1767,7 @@
<param name='<0-65535>' doc='NS Entity ID (NSEI)' />
</params>
</command>
- <command id='timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries) <0-65535>'>
+ <command id='timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries|tsns-prov) <0-65535>'>
<params>
<param name='timer' doc='Network Service Timer' />
<param name='tns-block' doc='(un)blocking Timer (Tns-block) timeout' />
@@ -1772,6 +1777,7 @@
<param name='tns-test' doc='Test Timer (Tns-test) timeout' />
<param name='tns-alive' doc='Alive Timer (Tns-alive) timeout' />
<param name='tns-alive-retries' doc='Alive Timer (Tns-alive) number of retries' />
+ <param name='tsns-prov' doc='SNS Provision Timer (Tsns-prov) timeout' />
<param name='<0-65535>' doc='Timer Value' />
</params>
</command>
@@ -2234,6 +2240,13 @@
<param name='GEA4' doc='Use GEA4' />
</params>
</command>
+ <command id='gsup ipa-name NAME'>
+ <params>
+ <param name='gsup' doc='GSUP Parameters' />
+ <param name='ipa-name' doc='Set the IPA name of this SGSN' />
+ <param name='NAME' doc='A unique name for this SGSN. For example: PLMN + redundancy server number: SGSN-901-70-0. This name is used for GSUP routing and must be set if more than one SGSN is connected to the network. The default is 'SGSN-00-00-00-00-00-00'.' />
+ </params>
+ </command>
<command id='gsup remote-ip A.B.C.D'>
<params>
<param name='gsup' doc='GSUP Parameters' />
@@ -2325,7 +2338,8 @@
<param name='no' doc='Negate a command or set its defaults' />
<param name='cdr' doc='CDR' />
<param name='trap' doc='Disable sending CDR via TRAP CTRL messages' />
- </params> </command>
+ </params>
+ </command>
<command id='cdr interval <1-2147483647>'>
<params>
<param name='cdr' doc='CDR' />
--
To view, visit https://gerrit.osmocom.org/c/osmo-sgsn/+/14377
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-sgsn
Gerrit-Branch: master
Gerrit-Change-Id: I3dfe3598055457cc9724a371590e676f1920652b
Gerrit-Change-Number: 14377
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <axilirator at gmail.com>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190604/40940854/attachment.htm>