This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has uploaded this change for review. ( https://gerrit.osmocom.org/12834 Change subject: manual: s/OsmoNITB/OsmoBSC/ in examples; remove E1 based BTSs ...................................................................... manual: s/OsmoNITB/OsmoBSC/ in examples; remove E1 based BTSs We still haven't re-introduced support for E1 based BTSs, so let's remove the relevant chapters from the manuals. Also, make sure we don't call anything OsmoNITB in this manual anymore. Change-Id: I834d65836731958b6be823a18e35407183398715 --- M doc/manuals/chapters/bts-examples.adoc 1 file changed, 6 insertions(+), 99 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/34/12834/1 diff --git a/doc/manuals/chapters/bts-examples.adoc b/doc/manuals/chapters/bts-examples.adoc index b15fb99..e404989 100644 --- a/doc/manuals/chapters/bts-examples.adoc +++ b/doc/manuals/chapters/bts-examples.adoc @@ -1,109 +1,16 @@ [[bts-examples]] -== OsmoNITB example configuration files +== OsmoBSC example configuration files -The `openbsc/doc/examples/osmo-nitb` directory in the OpenBSC source +The `osmo-bsc/doc/examples/osmo-bsc` directory in the OpenBSC source tree contains a collection of example configuration files, sorted by BTS type. This chapter is illustrating some excerpts from those examples -[[bts_example_bs11]] -=== Example configuration for OsmoNITB with one dual-TRX BS-11 - -.OsmoNITB with BS11, 2 TRX, no frequency hopping -==== - ----- -e1_input - e1_line 0 driver misdn -network - network country code 1 - mobile network code 1 - short name OpenBSC - long name OpenBSC - timer t3101 10 - timer t3113 60 - bts 0 - type bs11 <1> - band GSM900 - cell_identity 1 - location_area_code 1 - training_sequence_code 7 - base_station_id_code 63 - oml e1 line 0 timeslot 1 sub-slot full <2> - oml e1 tei 25 <3> - trx 0 - arfcn 121 - max_power_red 0 - rsl e1 line 0 timeslot 1 sub-slot full <4> - rsl e1 tei 1 <5> - timeslot 0 - phys_chan_config CCCH+SDCCH4 - e1 line 0 timeslot 1 sub-slot full - timeslot 1 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 1 <6> - timeslot 2 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 0 timeslot 2 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 0 timeslot 3 sub-slot 3 - trx 1 - arfcn 123 - max_power_red 0 - rsl e1 line 0 timeslot 1 sub-slot full <4> - rsl e1 tei 2 <5> - timeslot 0 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 0 <6> - timeslot 1 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 1 - timeslot 2 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 2 - timeslot 3 - phys_chan_config TCH/F - e1 line 0 timeslot 4 sub-slot 3 - timeslot 4 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 0 - timeslot 5 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 1 - timeslot 6 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 2 - timeslot 7 - phys_chan_config TCH/F - e1 line 0 timeslot 5 sub-slot 3 ----- -==== - -<1> The BTS type must be set to __bs11__ -<2> The OML E1 timeslot needs to be identical with what was on the BTS side using LMT. -<3> The OML TEI value needs to be identical with what was configured on the BTS side using LMT. -<4> The RSL E1 timeslot can be identical for all TRX. -<5> The RSL TEI values __must__ be different if multiple TRX share one E1 signalling timeslot. -<6> The TCH all need to be allocated one 16k sub-slot on the E1 - [[bts_example_nbts]] -=== Example configuration for OsmoNITB with one single-TRX nanoBTS +=== Example configuration for OsmoBSC with one single-TRX nanoBTS -.OsmoNITB with one single-TRX nanoBTS +.OsmoBSC with one single-TRX nanoBTS ==== ---- @@ -185,9 +92,9 @@ [[bts_example_nbts_multi]] -=== Example configuration for OsmoNITB with multi-TRX nanoBTS +=== Example configuration for OsmoBSC with multi-TRX nanoBTS -.OsmoNITB configured for dual-TRX (stacked) nanoBTS +.OsmoBSC configured for dual-TRX (stacked) nanoBTS ==== ---- -- To view, visit https://gerrit.osmocom.org/12834 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-MessageType: newchange Gerrit-Change-Id: I834d65836731958b6be823a18e35407183398715 Gerrit-Change-Number: 12834 Gerrit-PatchSet: 1 Gerrit-Owner: Harald Welte <laforge at gnumonks.org> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190205/1760875c/attachment.htm>