This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
osmith gerrit-no-reply at lists.osmocom.orgosmith has uploaded this change for review. ( https://gerrit.osmocom.org/12010 Change subject: OsmoMGCP and OsmoNAT manuals moved from osmo-gsm-manuals.git ...................................................................... OsmoMGCP and OsmoNAT manuals moved from osmo-gsm-manuals.git Add both manuals to manuals/OsmoMGCP and manuals/OsmoNAT. Build them just like the existing OsmoNITB manual: $ cd manuals/OsmoMGCP $ make The commit history only consisted of the initial commit and was not imported. Related: OS#3385 Change-Id: Ibace91bc518079765e12529596a1763b6c5a04b5 --- A manuals/OsmoMGCP/Makefile A manuals/OsmoMGCP/osmomgcp-vty-reference.xml A manuals/OsmoMGCP/vty/mgcp_vty_additions.xml A manuals/OsmoMGCP/vty/mgcp_vty_reference.xml A manuals/OsmoNAT/Makefile A manuals/OsmoNAT/osmonat-vty-reference.xml A manuals/OsmoNAT/vty/nat_vty_additions.xml A manuals/OsmoNAT/vty/nat_vty_reference.xml 8 files changed, 3,606 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/openbsc refs/changes/10/12010/1 diff --git a/manuals/OsmoMGCP/Makefile b/manuals/OsmoMGCP/Makefile new file mode 100644 index 0000000..022f6d4 --- /dev/null +++ b/manuals/OsmoMGCP/Makefile @@ -0,0 +1,7 @@ +OSMO_GSM_MANUALS_DIR := $(shell ../osmo-gsm-manuals-dir.sh) +srcdir=$(CURDIR) + +VTY_REFERENCE = osmomgcp-vty-reference.xml +include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc + +include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc diff --git a/manuals/OsmoMGCP/osmomgcp-vty-reference.xml b/manuals/OsmoMGCP/osmomgcp-vty-reference.xml new file mode 100644 index 0000000..e9cc898 --- /dev/null +++ b/manuals/OsmoMGCP/osmomgcp-vty-reference.xml @@ -0,0 +1,44 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- + ex:ts=2:sw=42sts=2:et + -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*- +--> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN" +"http://docbook.org/xml/5.0/dtd/docbook.dtd" [ +<!ENTITY chapter-vty SYSTEM "./common/chapters/vty.xml" > +<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" > +]> + +<book> + <info> + <revhistory> + <revision> + <revnumber>v1</revnumber> + <date>13th August 2012</date> + <authorinitials>hf</authorinitials> + <revremark>Initial</revremark> + </revision> + <revision> + <revnumber>v2</revnumber> + <date>5th March 2014</date> + <authorinitials>hf</authorinitials> + <revremark>Update to match osmo-bsc version 0.13.0-305</revremark> + </revision> + </revhistory> + + <title>OsmoMGCP VTY Reference</title> + + <copyright> + <year>2012-2014</year> + </copyright> + + <legalnotice> + <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved. + </para> + </legalnotice> + </info> + + <!-- Main chapters--> + &chapter-vty; +</book> + diff --git a/manuals/OsmoMGCP/vty/mgcp_vty_additions.xml b/manuals/OsmoMGCP/vty/mgcp_vty_additions.xml new file mode 100644 index 0000000..a11cdf0 --- /dev/null +++ b/manuals/OsmoMGCP/vty/mgcp_vty_additions.xml @@ -0,0 +1,14 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id='19'> + <child_of nodeid='4' /> + <name>MGCP Global Commands</name> + <description>This node allows to configure global MGCP settings. These include + the various port numbers.</description> + </node> + <node id='27'> + <child_of nodeid='19' /> + <name>MGCP Trunk Command</name> + <description>This node allows to configure a MGCP trunk. These include the number, + the local binding ports, SDP configuration.</description> + </node> +</vtydoc> diff --git a/manuals/OsmoMGCP/vty/mgcp_vty_reference.xml b/manuals/OsmoMGCP/vty/mgcp_vty_reference.xml new file mode 100644 index 0000000..6ea76a5 --- /dev/null +++ b/manuals/OsmoMGCP/vty/mgcp_vty_reference.xml @@ -0,0 +1,1397 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id='0'> + </node> + <node id='1'> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='enable'> + <params> + <param name='enable' doc='Turn on privileged mode command' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> + <param name='cc' doc='Layer3 Call Control (CC)' /> + <param name='mm' doc='Layer3 Mobility Management (MM)' /> + <param name='rr' doc='Layer3 Radio Resource (RR)' /> + <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /> + <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> + <param name='mncc' doc='MNCC API for Call Control application' /> + <param name='pag' doc='Paging Subsystem' /> + <param name='meas' doc='Radio Measurement Processing' /> + <param name='sccp' doc='SCCP Protocol' /> + <param name='msc' doc='Mobile Switching Center' /> + <param name='mgcp' doc='Media Gateway Control Protocol' /> + <param name='ho' doc='Hand-Over' /> + <param name='db' doc='Database Layer' /> + <param name='ref' doc='Reference Counting' /> + <param name='gprs' doc='GPRS Packet Service' /> + <param name='ns' doc='GPRS Network Service (NS)' /> + <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> + <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> + <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> + <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> + <param name='ctrl' doc='Control interface' /> + <param name='smpp' doc='SMPP interface for external SMS apps' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='everything' doc='Log simply everything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show mgcp [stats]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='mgcp' doc='Display information about the MGCP Media Gateway' /> + <param name='[stats]' doc='Include Statistics' /> + </params> + </command> + </node> + <node id='2'> + </node> + <node id='3'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='disable'> + <params> + <param name='disable' doc='Turn off privileged mode command' /> + </params> + </command> + <command id='configure terminal'> + <params> + <param name='configure' doc='Configuration from vty interface' /> + <param name='terminal' doc='Configuration terminal' /> + </params> + </command> + <command id='copy running-config startup-config'> + <params> + <param name='copy' doc='Copy configuration' /> + <param name='running-config' doc='Copy running config to... ' /> + <param name='startup-config' doc='Copy running config to startup config (same as write file)' /> + </params> + </command> + <command id='show startup-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='startup-config' doc='Contentes of startup configuration' /> + </params> + </command> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='terminal monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='terminal no monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> + <param name='cc' doc='Layer3 Call Control (CC)' /> + <param name='mm' doc='Layer3 Mobility Management (MM)' /> + <param name='rr' doc='Layer3 Radio Resource (RR)' /> + <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /> + <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> + <param name='mncc' doc='MNCC API for Call Control application' /> + <param name='pag' doc='Paging Subsystem' /> + <param name='meas' doc='Radio Measurement Processing' /> + <param name='sccp' doc='SCCP Protocol' /> + <param name='msc' doc='Mobile Switching Center' /> + <param name='mgcp' doc='Media Gateway Control Protocol' /> + <param name='ho' doc='Hand-Over' /> + <param name='db' doc='Database Layer' /> + <param name='ref' doc='Reference Counting' /> + <param name='gprs' doc='GPRS Packet Service' /> + <param name='ns' doc='GPRS Network Service (NS)' /> + <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> + <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> + <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> + <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> + <param name='ctrl' doc='Control interface' /> + <param name='smpp' doc='SMPP interface for external SMS apps' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='everything' doc='Log simply everything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show mgcp [stats]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='mgcp' doc='Display information about the MGCP Media Gateway' /> + <param name='[stats]' doc='Include Statistics' /> + </params> + </command> + <command id='loop-endpoint <0-64> NAME (0|1)'> + <params> + <param name='loop-endpoint' doc='Loop a given endpoint' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='NAME' doc='The name in hex of the endpoint' /> + <param name='0' doc='Disable the loop' /> + <param name='1' doc='Enable the loop' /> + </params> + </command> + <command id='tap-call <0-64> ENDPOINT (bts-in|bts-out|net-in|net-out) A.B.C.D <0-65534>'> + <params> + <param name='tap-call' doc='Forward data on endpoint to a different system' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='ENDPOINT' doc='The endpoint in hex' /> + <param name='bts-in' doc='Forward the data coming from the bts' /> + <param name='bts-out' doc='Forward the data coming from the bts leaving to the network' /> + <param name='net-in' doc='Forward the data coming from the net' /> + <param name='net-out' doc='Forward the data coming from the net leaving to the bts' /> + <param name='A.B.C.D' doc='destination IP of the data' /> + <param name='<0-65534>' doc='destination port' /> + </params> + </command> + <command id='free-endpoint <0-64> NUMBER'> + <params> + <param name='free-endpoint' doc='Free the given endpoint' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='NUMBER' doc='Endpoint number in hex.' /> + </params> + </command> + <command id='reset-endpoint <0-64> NUMBER'> + <params> + <param name='reset-endpoint' doc='Reset the given endpoint' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='NUMBER' doc='Endpoint number in hex.' /> + </params> + </command> + <command id='reset-all-endpoints'> + <params> + <param name='reset-all-endpoints' doc='Reset all endpoints' /> + </params> + </command> + </node> + <node id='4'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='hostname WORD'> + <params> + <param name='hostname' doc='Set system's network name' /> + <param name='WORD' doc='This system's network name' /> + </params> + </command> + <command id='no hostname [HOSTNAME]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='hostname' doc='Reset system's network name' /> + <param name='[HOSTNAME]' doc='Host name of this router' /> + </params> + </command> + <command id='password (8|) WORD'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN line password string' /> + </params> + </command> + <command id='password LINE'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> + </params> + </command> + <command id='enable password (8|) WORD'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN 'enable' password string' /> + </params> + </command> + <command id='enable password LINE'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> + </params> + </command> + <command id='no enable password'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + </params> + </command> + <command id='banner motd default'> + <params> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + <param name='default' doc='Default string' /> + </params> + </command> + <command id='banner motd file [FILE]'> + <params> + <param name='banner' doc='Set banner' /> + <param name='motd' doc='Banner for motd' /> + <param name='file' doc='Banner from a file' /> + <param name='[FILE]' doc='Filename' /> + </params> + </command> + <command id='no banner motd'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + </params> + </command> + <command id='service terminal-length <0-512>'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='no service terminal-length [<0-512>]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='line vty'> + <params> + <param name='line' doc='Configure a terminal line' /> + <param name='vty' doc='Virtual terminal' /> + </params> + </command> + <command id='service advanced-vty'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='no service advanced-vty'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='log stderr'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='no log stderr'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='log file .FILENAME'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='no log file .FILENAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='log alarms <2-32700>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + <param name='<2-32700>' doc='Maximum number of messages to log' /> + </params> + </command> + <command id='no log alarms'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + </params> + </command> + <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='authpriv' doc='Security/authorization messages facility' /> + <param name='cron' doc='Clock daemon (cron/at) facility' /> + <param name='daemon' doc='General system daemon facility' /> + <param name='ftp' doc='Ftp daemon facility' /> + <param name='lpr' doc='Line printer facility' /> + <param name='mail' doc='Mail facility' /> + <param name='news' doc='News facility' /> + <param name='user' doc='Generic facility' /> + <param name='uucp' doc='UUCP facility' /> + </params> + </command> + <command id='log syslog local <0-7>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='local' doc='Syslog LOCAL facility' /> + <param name='<0-7>' doc='Local facility number' /> + </params> + </command> + <command id='no log syslog'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + </params> + </command> + <command id='mgcp'> + <params> + <param name='mgcp' doc='Configure the MGCP' /> + </params> + </command> + </node> + <node id='7'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> + <param name='cc' doc='Layer3 Call Control (CC)' /> + <param name='mm' doc='Layer3 Mobility Management (MM)' /> + <param name='rr' doc='Layer3 Radio Resource (RR)' /> + <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /> + <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> + <param name='mncc' doc='MNCC API for Call Control application' /> + <param name='pag' doc='Paging Subsystem' /> + <param name='meas' doc='Radio Measurement Processing' /> + <param name='sccp' doc='SCCP Protocol' /> + <param name='msc' doc='Mobile Switching Center' /> + <param name='mgcp' doc='Media Gateway Control Protocol' /> + <param name='ho' doc='Hand-Over' /> + <param name='db' doc='Database Layer' /> + <param name='ref' doc='Reference Counting' /> + <param name='gprs' doc='GPRS Packet Service' /> + <param name='ns' doc='GPRS Network Service (NS)' /> + <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> + <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> + <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> + <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> + <param name='ctrl' doc='Control interface' /> + <param name='smpp' doc='SMPP interface for external SMS apps' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='everything' doc='Log simply everything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + </node> + <node id='8'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='login'> + <params> + <param name='login' doc='Enable password checking' /> + </params> + </command> + <command id='no login'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='login' doc='Enable password checking' /> + </params> + </command> + </node> + <node id='19'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='local ip A.B.C.D'> + <params> + <param name='local' doc='Local options for the SDP record' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address to use in SDP record' /> + </params> + </command> + <command id='bts ip A.B.C.D'> + <params> + <param name='bts' doc='BTS Audio source/destination options' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address of the BTS' /> + </params> + </command> + <command id='bind ip A.B.C.D'> + <params> + <param name='bind' doc='Listen/Bind related socket option' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address to bind to' /> + </params> + </command> + <command id='bind port <0-65534>'> + <params> + <param name='bind' doc='Listen/Bind related socket option' /> + <param name='port' doc='Port information' /> + <param name='<0-65534>' doc='UDP port to listen for MGCP messages' /> + </params> + </command> + <command id='bind early (0|1)'> + <params> + <param name='bind' doc='Listen/Bind related socket option' /> + <param name='early' doc='Bind local ports on start up' /> + <param name='0' doc='Bind on demand' /> + <param name='1' doc='Bind on startup' /> + </params> + </command> + <command id='rtp base <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='base' doc='First UDP port allocated for the BTS side' /> + <param name='<0-65534>' doc='UDP Port number' /> + </params> + </command> + <command id='rtp bts-base <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='bts-base' doc='First UDP port allocated for the BTS side' /> + <param name='<0-65534>' doc='UDP Port number' /> + </params> + </command> + <command id='rtp net-base <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='net-base' doc='First UDP port allocated for the NET side' /> + <param name='<0-65534>' doc='UDP Port number' /> + </params> + </command> + <command id='rtp bts-range <0-65534> <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='bts-range' doc='Range of ports to use for the BTS side' /> + <param name='<0-65534>' doc='Start of the range of ports' /> + <param name='<0-65534>' doc='End of the range of ports' /> + </params> + </command> + <command id='rtp net-range <0-65534> <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='net-range' doc='Range of ports to use for the NET side' /> + <param name='<0-65534>' doc='Start of the range of ports' /> + <param name='<0-65534>' doc='End of the range of ports' /> + </params> + </command> + <command id='rtp transcoder-range <0-65534> <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='transcoder-range' doc='Range of ports to use for the Transcoder' /> + <param name='<0-65534>' doc='Start of the range of ports' /> + <param name='<0-65534>' doc='End of the range of ports' /> + </params> + </command> + <command id='rtp transcoder-base <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='transcoder-base' doc='First UDP port allocated for the Transcoder side' /> + <param name='<0-65534>' doc='UDP Port number' /> + </params> + </command> + <command id='rtp ip-dscp <0-255>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='ip-dscp' doc='Apply IP_TOS to the audio stream' /> + <param name='<0-255>' doc='The DSCP value' /> + </params> + </command> + <command id='rtp ip-tos <0-255>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='ip-tos' doc='Apply IP_TOS to the audio stream' /> + <param name='<0-255>' doc='The DSCP value' /> + </params> + </command> + <command id='rtp keep-alive <1-120>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='<1-120>' doc='Keep alive interval in secs' /> + </params> + </command> + <command id='rtp keep-alive once'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='once' doc='Send dummy packet only once after CRCX/MDCX' /> + </params> + </command> + <command id='no rtp keep-alive'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + </params> + </command> + <command id='call-agent ip A.B.C.D'> + <params> + <param name='call-agent' doc='Callagent information' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address of the callagent' /> + </params> + </command> + <command id='call agent ip A.B.C.D'> + <params> + <param name='call' doc='Callagent information' /> + <param name='agent' doc='Callagent information' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address of the callagent' /> + </params> + </command> + <command id='transcoder-mgw A.B.C.D'> + <params> + <param name='transcoder-mgw' doc='Use a MGW to detranscoder RTP' /> + <param name='A.B.C.D' doc='The IP address of the MGW' /> + </params> + </command> + <command id='no transcoder-mgw'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='transcoder-mgw' doc='Disable the transcoding' /> + </params> + </command> + <command id='transcoder-remote-base <0-65534>'> + <params> + <param name='transcoder-remote-base' doc='Set the base port for the transcoder' /> + <param name='<0-65534>' doc='The RTP base port on the transcoder' /> + </params> + </command> + <command id='sdp audio-payload number <1-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<1-255>' doc='Payload number' /> + </params> + </command> + <command id='sdp audio-payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='name' doc='Name' /> + <param name='NAME' doc='Payload name' /> + </params> + </command> + <command id='sdp audio payload number <1-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<1-255>' doc='Payload number' /> + </params> + </command> + <command id='sdp audio payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='name' doc='Name' /> + <param name='NAME' doc='Payload name' /> + </params> + </command> + <command id='loop (0|1)'> + <params> + <param name='loop' doc='Loop audio for all endpoints on main trunk' /> + <param name='0' doc='Don't Loop' /> + <param name='1' doc='Loop' /> + </params> + </command> + <command id='number endpoints <0-65534>'> + <params> + <param name='number' doc='Number options' /> + <param name='endpoints' doc='Endpoints available' /> + <param name='<0-65534>' doc='Number endpoints' /> + </params> + </command> + <command id='rtcp-omit'> + <params> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='no rtcp-omit'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='rtp-patch ssrc'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='no rtp-patch ssrc'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='rtp-patch timestamp'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch timestamp'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + </params> + </command> + <command id='sdp audio fmtp-extra .NAME'> + <params> + <param name='sdp' doc='Add extra fmtp for the SDP file' /> + <param name='audio' doc='Audio' /> + <param name='fmtp-extra' doc='Fmtp-extra' /> + <param name='.NAME' doc='Extra Information' /> + </params> + </command> + <command id='sdp audio-payload send-ptime'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + <command id='no sdp audio-payload send-ptime'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + <command id='trunk <1-64>'> + <params> + <param name='trunk' doc='Configure a SS7 trunk' /> + <param name='<1-64>' doc='Trunk Nr' /> + </params> + </command> + </node> + <node id='27'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='rtp keep-alive <1-120>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='<1-120>' doc='Keep-alive interval in secs' /> + </params> + </command> + <command id='rtp keep-alive once'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='once' doc='Send dummy packet only once after CRCX/MDCX' /> + </params> + </command> + <command id='no rtp keep-alive'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + </params> + </command> + <command id='sdp audio-payload number <1-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<1-255>' doc='Payload Number' /> + </params> + </command> + <command id='sdp audio-payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='name' doc='Payload' /> + <param name='NAME' doc='Payload Name' /> + </params> + </command> + <command id='sdp audio payload number <1-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<1-255>' doc='Payload Number' /> + </params> + </command> + <command id='sdp audio payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='name' doc='Payload' /> + <param name='NAME' doc='Payload Name' /> + </params> + </command> + <command id='loop (0|1)'> + <params> + <param name='loop' doc='Loop audio for all endpoints on this trunk' /> + <param name='0' doc='Don't Loop' /> + <param name='1' doc='Loop' /> + </params> + </command> + <command id='rtcp-omit'> + <params> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='no rtcp-omit'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='rtp-patch ssrc'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='no rtp-patch ssrc'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='rtp-patch timestamp'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch timestamp'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + </params> + </command> + <command id='sdp audio fmtp-extra .NAME'> + <params> + <param name='sdp' doc='Add extra fmtp for the SDP file' /> + <param name='audio' doc='Audio' /> + <param name='fmtp-extra' doc='Fmtp-extra' /> + <param name='.NAME' doc='Extra Information' /> + </params> + </command> + <command id='sdp audio-payload send-ptime'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + <command id='no sdp audio-payload send-ptime'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + </node> +</vtydoc> \ No newline at end of file diff --git a/manuals/OsmoNAT/Makefile b/manuals/OsmoNAT/Makefile new file mode 100644 index 0000000..9c380a2 --- /dev/null +++ b/manuals/OsmoNAT/Makefile @@ -0,0 +1,7 @@ +OSMO_GSM_MANUALS_DIR := $(shell ../osmo-gsm-manuals-dir.sh) +srcdir=$(CURDIR) + +VTY_REFERENCE = osmonat-vty-reference.xml +include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc + +include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc diff --git a/manuals/OsmoNAT/osmonat-vty-reference.xml b/manuals/OsmoNAT/osmonat-vty-reference.xml new file mode 100644 index 0000000..8f8b096 --- /dev/null +++ b/manuals/OsmoNAT/osmonat-vty-reference.xml @@ -0,0 +1,44 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- + ex:ts=2:sw=42sts=2:et + -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*- +--> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN" +"http://docbook.org/xml/5.0/dtd/docbook.dtd" [ +<!ENTITY chapter-vty SYSTEM "./common/chapters/vty.xml" > +<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" > +]> + +<book> + <info> + <revhistory> + <revision> + <revnumber>v1</revnumber> + <date>13th August 2012</date> + <authorinitials>hf</authorinitials> + <revremark>Initial</revremark> + </revision> + <revision> + <revnumber>v2</revnumber> + <date>5th March 2014</date> + <authorinitials>hf</authorinitials> + <revremark>Update to match osmo-bsc version 0.13.0-305</revremark> + </revision> + </revhistory> + + <title>OsmoNAT VTY Reference</title> + + <copyright> + <year>2012-2014</year> + </copyright> + + <legalnotice> + <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved. + </para> + </legalnotice> + </info> + + <!-- Main chapters--> + &chapter-vty; +</book> + diff --git a/manuals/OsmoNAT/vty/nat_vty_additions.xml b/manuals/OsmoNAT/vty/nat_vty_additions.xml new file mode 100644 index 0000000..4aa67f6 --- /dev/null +++ b/manuals/OsmoNAT/vty/nat_vty_additions.xml @@ -0,0 +1,32 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id='19'> + <child_of nodeid='4' /> + <name>MGCP Commands</name> + <description>This node allows to configure global MGCP settings. These include + the various port numbers.</description> + </node> + + <node id='23'> + <child_of nodeid='4' /> + <name>NAT Commands</name> + <description>This node allows to configure the global NAT settings. These include + the destination address of the MSC, the filter and rewriting rules to use.</description> + </node> + <node id='24'> + <child_of nodeid='23' /> + <name>BSC Commands</name> + <description>This node allows to configure a BSC. A BSC has a list of + LACs, an access token associated to it.</description> + </node> + <node id='27'> + <hide /> + </node> + <node id='28'> + <child_of nodeid='23' /> + <name>Paging Group Commands</name> + <description>This node allows to configure a Paging Group. A Paging Group + holds the LACs of several destinations and a BSC can refer to a Paging + Group. This way several BSCs can receive the paging for a shared LAC. + </description> + </node> +</vtydoc> diff --git a/manuals/OsmoNAT/vty/nat_vty_reference.xml b/manuals/OsmoNAT/vty/nat_vty_reference.xml new file mode 100644 index 0000000..80fe08f --- /dev/null +++ b/manuals/OsmoNAT/vty/nat_vty_reference.xml @@ -0,0 +1,2061 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id='0'> + </node> + <node id='1'> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='enable'> + <params> + <param name='enable' doc='Turn on privileged mode command' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> + <param name='cc' doc='Layer3 Call Control (CC)' /> + <param name='mm' doc='Layer3 Mobility Management (MM)' /> + <param name='rr' doc='Layer3 Radio Resource (RR)' /> + <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /> + <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> + <param name='mncc' doc='MNCC API for Call Control application' /> + <param name='pag' doc='Paging Subsystem' /> + <param name='meas' doc='Radio Measurement Processing' /> + <param name='sccp' doc='SCCP Protocol' /> + <param name='msc' doc='Mobile Switching Center' /> + <param name='mgcp' doc='Media Gateway Control Protocol' /> + <param name='ho' doc='Hand-Over' /> + <param name='db' doc='Database Layer' /> + <param name='ref' doc='Reference Counting' /> + <param name='gprs' doc='GPRS Packet Service' /> + <param name='ns' doc='GPRS Network Service (NS)' /> + <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> + <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> + <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> + <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> + <param name='ctrl' doc='Control interface' /> + <param name='smpp' doc='SMPP interface for external SMS apps' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='everything' doc='Log simply everything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show sccp connections'> + <params> + <param name='show' doc='Show running system information' /> + <param name='sccp' doc='Display information about SCCP' /> + <param name='connections' doc='All active connections' /> + </params> + </command> + <command id='show bsc connections'> + <params> + <param name='show' doc='Show running system information' /> + <param name='bsc' doc='Information about BSCs' /> + <param name='connections' doc='All active connections' /> + </params> + </command> + <command id='show bsc config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='bsc' doc='Information about BSCs' /> + <param name='config' doc='Configuration of BSCs' /> + </params> + </command> + <command id='show statistics [NR]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='statistics' doc='Display network statistics' /> + <param name='[NR]' doc='Number of the BSC' /> + </params> + </command> + <command id='show statistics-by-lac <0-65535>'> + <params> + <param name='show' doc='Show running system information' /> + <param name='statistics-by-lac' doc='Display network statistics by lac' /> + <param name='<0-65535>' doc='The lac of the BSC' /> + </params> + </command> + <command id='close bsc connection BSC_NR'> + <params> + <param name='close' doc='Close' /> + <param name='bsc' doc='A-link' /> + <param name='connection' doc='Connection' /> + <param name='BSC_NR' doc='Identifier of the BSC' /> + </params> + </command> + <command id='show msc connection'> + <params> + <param name='show' doc='Show running system information' /> + <param name='msc' doc='MSC related information' /> + <param name='connection' doc='Status of the A-link connection' /> + </params> + </command> + <command id='test regex PATTERN STRING'> + <params> + <param name='test' doc='Test utilities' /> + <param name='regex' doc='Regexp testing' /> + <param name='PATTERN' doc='The regexp pattern' /> + <param name='STRING' doc='The string to match' /> + </params> + </command> + <command id='show bsc mgcp NR'> + <params> + <param name='show' doc='Show running system information' /> + <param name='bsc' doc='Information about BSCs' /> + <param name='mgcp' doc='MGCP related status' /> + <param name='NR' doc='Identifier of the BSC' /> + </params> + </command> + <command id='show access-list NAME'> + <params> + <param name='show' doc='Show running system information' /> + <param name='access-list' doc='IMSI access list' /> + <param name='NAME' doc='Name of the access list' /> + </params> + </command> + <command id='show imsi-black-list'> + <params> + <param name='show' doc='Show running system information' /> + <param name='imsi-black-list' doc='IMSIs barred from the network' /> + </params> + </command> + <command id='show prefix-tree'> + <params> + <param name='show' doc='Show running system information' /> + <param name='prefix-tree' doc='Prefix tree for number rewriting' /> + </params> + </command> + <command id='show ussd-connection'> + <params> + <param name='show' doc='Show running system information' /> + <param name='ussd-connection' doc='USSD connection related information' /> + </params> + </command> + <command id='show mgcp [stats]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='mgcp' doc='Display information about the MGCP Media Gateway' /> + <param name='[stats]' doc='Include Statistics' /> + </params> + </command> + </node> + <node id='2'> + </node> + <node id='3'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='disable'> + <params> + <param name='disable' doc='Turn off privileged mode command' /> + </params> + </command> + <command id='configure terminal'> + <params> + <param name='configure' doc='Configuration from vty interface' /> + <param name='terminal' doc='Configuration terminal' /> + </params> + </command> + <command id='copy running-config startup-config'> + <params> + <param name='copy' doc='Copy configuration' /> + <param name='running-config' doc='Copy running config to... ' /> + <param name='startup-config' doc='Copy running config to startup config (same as write file)' /> + </params> + </command> + <command id='show startup-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='startup-config' doc='Contentes of startup configuration' /> + </params> + </command> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='terminal monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='terminal no monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> + <param name='cc' doc='Layer3 Call Control (CC)' /> + <param name='mm' doc='Layer3 Mobility Management (MM)' /> + <param name='rr' doc='Layer3 Radio Resource (RR)' /> + <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /> + <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> + <param name='mncc' doc='MNCC API for Call Control application' /> + <param name='pag' doc='Paging Subsystem' /> + <param name='meas' doc='Radio Measurement Processing' /> + <param name='sccp' doc='SCCP Protocol' /> + <param name='msc' doc='Mobile Switching Center' /> + <param name='mgcp' doc='Media Gateway Control Protocol' /> + <param name='ho' doc='Hand-Over' /> + <param name='db' doc='Database Layer' /> + <param name='ref' doc='Reference Counting' /> + <param name='gprs' doc='GPRS Packet Service' /> + <param name='ns' doc='GPRS Network Service (NS)' /> + <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> + <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> + <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> + <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> + <param name='ctrl' doc='Control interface' /> + <param name='smpp' doc='SMPP interface for external SMS apps' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='everything' doc='Log simply everything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show sccp connections'> + <params> + <param name='show' doc='Show running system information' /> + <param name='sccp' doc='Display information about SCCP' /> + <param name='connections' doc='All active connections' /> + </params> + </command> + <command id='show bsc connections'> + <params> + <param name='show' doc='Show running system information' /> + <param name='bsc' doc='Information about BSCs' /> + <param name='connections' doc='All active connections' /> + </params> + </command> + <command id='show bsc config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='bsc' doc='Information about BSCs' /> + <param name='config' doc='Configuration of BSCs' /> + </params> + </command> + <command id='show statistics [NR]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='statistics' doc='Display network statistics' /> + <param name='[NR]' doc='Number of the BSC' /> + </params> + </command> + <command id='show statistics-by-lac <0-65535>'> + <params> + <param name='show' doc='Show running system information' /> + <param name='statistics-by-lac' doc='Display network statistics by lac' /> + <param name='<0-65535>' doc='The lac of the BSC' /> + </params> + </command> + <command id='close bsc connection BSC_NR'> + <params> + <param name='close' doc='Close' /> + <param name='bsc' doc='A-link' /> + <param name='connection' doc='Connection' /> + <param name='BSC_NR' doc='Identifier of the BSC' /> + </params> + </command> + <command id='show msc connection'> + <params> + <param name='show' doc='Show running system information' /> + <param name='msc' doc='MSC related information' /> + <param name='connection' doc='Status of the A-link connection' /> + </params> + </command> + <command id='test regex PATTERN STRING'> + <params> + <param name='test' doc='Test utilities' /> + <param name='regex' doc='Regexp testing' /> + <param name='PATTERN' doc='The regexp pattern' /> + <param name='STRING' doc='The string to match' /> + </params> + </command> + <command id='show bsc mgcp NR'> + <params> + <param name='show' doc='Show running system information' /> + <param name='bsc' doc='Information about BSCs' /> + <param name='mgcp' doc='MGCP related status' /> + <param name='NR' doc='Identifier of the BSC' /> + </params> + </command> + <command id='show access-list NAME'> + <params> + <param name='show' doc='Show running system information' /> + <param name='access-list' doc='IMSI access list' /> + <param name='NAME' doc='Name of the access list' /> + </params> + </command> + <command id='show imsi-black-list'> + <params> + <param name='show' doc='Show running system information' /> + <param name='imsi-black-list' doc='IMSIs barred from the network' /> + </params> + </command> + <command id='show prefix-tree'> + <params> + <param name='show' doc='Show running system information' /> + <param name='prefix-tree' doc='Prefix tree for number rewriting' /> + </params> + </command> + <command id='show ussd-connection'> + <params> + <param name='show' doc='Show running system information' /> + <param name='ussd-connection' doc='USSD connection related information' /> + </params> + </command> + <command id='set bsc last-used-endpoint <0-9999999999> <0-1024>'> + <params> + <param name='set' doc='Set a value' /> + <param name='bsc' doc='Operate on a BSC' /> + <param name='last-used-endpoint' doc='Last used endpoint for an assignment' /> + <param name='<0-9999999999>' doc='BSC configuration number' /> + <param name='<0-1024>' doc='Endpoint number used' /> + </params> + </command> + <command id='nat-block (block|unblock)'> + <params> + <param name='nat-block' doc='Block the NAT for new connections' /> + <param name='block' doc='Block' /> + <param name='unblock' doc='Unblock' /> + </params> + </command> + <command id='show mgcp [stats]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='mgcp' doc='Display information about the MGCP Media Gateway' /> + <param name='[stats]' doc='Include Statistics' /> + </params> + </command> + <command id='loop-endpoint <0-64> NAME (0|1)'> + <params> + <param name='loop-endpoint' doc='Loop a given endpoint' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='NAME' doc='The name in hex of the endpoint' /> + <param name='0' doc='Disable the loop' /> + <param name='1' doc='Enable the loop' /> + </params> + </command> + <command id='tap-call <0-64> ENDPOINT (bts-in|bts-out|net-in|net-out) A.B.C.D <0-65534>'> + <params> + <param name='tap-call' doc='Forward data on endpoint to a different system' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='ENDPOINT' doc='The endpoint in hex' /> + <param name='bts-in' doc='Forward the data coming from the bts' /> + <param name='bts-out' doc='Forward the data coming from the bts leaving to the network' /> + <param name='net-in' doc='Forward the data coming from the net' /> + <param name='net-out' doc='Forward the data coming from the net leaving to the bts' /> + <param name='A.B.C.D' doc='destination IP of the data' /> + <param name='<0-65534>' doc='destination port' /> + </params> + </command> + <command id='free-endpoint <0-64> NUMBER'> + <params> + <param name='free-endpoint' doc='Free the given endpoint' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='NUMBER' doc='Endpoint number in hex.' /> + </params> + </command> + <command id='reset-endpoint <0-64> NUMBER'> + <params> + <param name='reset-endpoint' doc='Reset the given endpoint' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='NUMBER' doc='Endpoint number in hex.' /> + </params> + </command> + <command id='reset-all-endpoints'> + <params> + <param name='reset-all-endpoints' doc='Reset all endpoints' /> + </params> + </command> + </node> + <node id='4'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='hostname WORD'> + <params> + <param name='hostname' doc='Set system's network name' /> + <param name='WORD' doc='This system's network name' /> + </params> + </command> + <command id='no hostname [HOSTNAME]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='hostname' doc='Reset system's network name' /> + <param name='[HOSTNAME]' doc='Host name of this router' /> + </params> + </command> + <command id='password (8|) WORD'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN line password string' /> + </params> + </command> + <command id='password LINE'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> + </params> + </command> + <command id='enable password (8|) WORD'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN 'enable' password string' /> + </params> + </command> + <command id='enable password LINE'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> + </params> + </command> + <command id='no enable password'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + </params> + </command> + <command id='banner motd default'> + <params> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + <param name='default' doc='Default string' /> + </params> + </command> + <command id='banner motd file [FILE]'> + <params> + <param name='banner' doc='Set banner' /> + <param name='motd' doc='Banner for motd' /> + <param name='file' doc='Banner from a file' /> + <param name='[FILE]' doc='Filename' /> + </params> + </command> + <command id='no banner motd'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + </params> + </command> + <command id='service terminal-length <0-512>'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='no service terminal-length [<0-512>]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='line vty'> + <params> + <param name='line' doc='Configure a terminal line' /> + <param name='vty' doc='Virtual terminal' /> + </params> + </command> + <command id='service advanced-vty'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='no service advanced-vty'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='log stderr'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='no log stderr'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='log file .FILENAME'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='no log file .FILENAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='log alarms <2-32700>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + <param name='<2-32700>' doc='Maximum number of messages to log' /> + </params> + </command> + <command id='no log alarms'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + </params> + </command> + <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='authpriv' doc='Security/authorization messages facility' /> + <param name='cron' doc='Clock daemon (cron/at) facility' /> + <param name='daemon' doc='General system daemon facility' /> + <param name='ftp' doc='Ftp daemon facility' /> + <param name='lpr' doc='Line printer facility' /> + <param name='mail' doc='Mail facility' /> + <param name='news' doc='News facility' /> + <param name='user' doc='Generic facility' /> + <param name='uucp' doc='UUCP facility' /> + </params> + </command> + <command id='log syslog local <0-7>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='local' doc='Syslog LOCAL facility' /> + <param name='<0-7>' doc='Local facility number' /> + </params> + </command> + <command id='no log syslog'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + </params> + </command> + <command id='nat'> + <params> + <param name='nat' doc='Configure the NAT' /> + </params> + </command> + <command id='mgcp'> + <params> + <param name='mgcp' doc='Configure the MGCP' /> + </params> + </command> + </node> + <node id='7'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> + <param name='cc' doc='Layer3 Call Control (CC)' /> + <param name='mm' doc='Layer3 Mobility Management (MM)' /> + <param name='rr' doc='Layer3 Radio Resource (RR)' /> + <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /> + <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> + <param name='mncc' doc='MNCC API for Call Control application' /> + <param name='pag' doc='Paging Subsystem' /> + <param name='meas' doc='Radio Measurement Processing' /> + <param name='sccp' doc='SCCP Protocol' /> + <param name='msc' doc='Mobile Switching Center' /> + <param name='mgcp' doc='Media Gateway Control Protocol' /> + <param name='ho' doc='Hand-Over' /> + <param name='db' doc='Database Layer' /> + <param name='ref' doc='Reference Counting' /> + <param name='gprs' doc='GPRS Packet Service' /> + <param name='ns' doc='GPRS Network Service (NS)' /> + <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> + <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> + <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> + <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> + <param name='ctrl' doc='Control interface' /> + <param name='smpp' doc='SMPP interface for external SMS apps' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='everything' doc='Log simply everything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + </node> + <node id='8'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='login'> + <params> + <param name='login' doc='Enable password checking' /> + </params> + </command> + <command id='no login'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='login' doc='Enable password checking' /> + </params> + </command> + </node> + <node id='19'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='local ip A.B.C.D'> + <params> + <param name='local' doc='Local options for the SDP record' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address to use in SDP record' /> + </params> + </command> + <command id='bts ip A.B.C.D'> + <params> + <param name='bts' doc='BTS Audio source/destination options' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address of the BTS' /> + </params> + </command> + <command id='bind ip A.B.C.D'> + <params> + <param name='bind' doc='Listen/Bind related socket option' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address to bind to' /> + </params> + </command> + <command id='bind port <0-65534>'> + <params> + <param name='bind' doc='Listen/Bind related socket option' /> + <param name='port' doc='Port information' /> + <param name='<0-65534>' doc='UDP port to listen for MGCP messages' /> + </params> + </command> + <command id='bind early (0|1)'> + <params> + <param name='bind' doc='Listen/Bind related socket option' /> + <param name='early' doc='Bind local ports on start up' /> + <param name='0' doc='Bind on demand' /> + <param name='1' doc='Bind on startup' /> + </params> + </command> + <command id='rtp base <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='base' doc='First UDP port allocated for the BTS side' /> + <param name='<0-65534>' doc='UDP Port number' /> + </params> + </command> + <command id='rtp bts-base <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='bts-base' doc='First UDP port allocated for the BTS side' /> + <param name='<0-65534>' doc='UDP Port number' /> + </params> + </command> + <command id='rtp net-base <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='net-base' doc='First UDP port allocated for the NET side' /> + <param name='<0-65534>' doc='UDP Port number' /> + </params> + </command> + <command id='rtp bts-range <0-65534> <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='bts-range' doc='Range of ports to use for the BTS side' /> + <param name='<0-65534>' doc='Start of the range of ports' /> + <param name='<0-65534>' doc='End of the range of ports' /> + </params> + </command> + <command id='rtp net-range <0-65534> <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='net-range' doc='Range of ports to use for the NET side' /> + <param name='<0-65534>' doc='Start of the range of ports' /> + <param name='<0-65534>' doc='End of the range of ports' /> + </params> + </command> + <command id='rtp transcoder-range <0-65534> <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='transcoder-range' doc='Range of ports to use for the Transcoder' /> + <param name='<0-65534>' doc='Start of the range of ports' /> + <param name='<0-65534>' doc='End of the range of ports' /> + </params> + </command> + <command id='rtp transcoder-base <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='transcoder-base' doc='First UDP port allocated for the Transcoder side' /> + <param name='<0-65534>' doc='UDP Port number' /> + </params> + </command> + <command id='rtp ip-dscp <0-255>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='ip-dscp' doc='Apply IP_TOS to the audio stream' /> + <param name='<0-255>' doc='The DSCP value' /> + </params> + </command> + <command id='rtp ip-tos <0-255>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='ip-tos' doc='Apply IP_TOS to the audio stream' /> + <param name='<0-255>' doc='The DSCP value' /> + </params> + </command> + <command id='rtp keep-alive <1-120>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='<1-120>' doc='Keep alive interval in secs' /> + </params> + </command> + <command id='rtp keep-alive once'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='once' doc='Send dummy packet only once after CRCX/MDCX' /> + </params> + </command> + <command id='no rtp keep-alive'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + </params> + </command> + <command id='call-agent ip A.B.C.D'> + <params> + <param name='call-agent' doc='Callagent information' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address of the callagent' /> + </params> + </command> + <command id='call agent ip A.B.C.D'> + <params> + <param name='call' doc='Callagent information' /> + <param name='agent' doc='Callagent information' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address of the callagent' /> + </params> + </command> + <command id='transcoder-mgw A.B.C.D'> + <params> + <param name='transcoder-mgw' doc='Use a MGW to detranscoder RTP' /> + <param name='A.B.C.D' doc='The IP address of the MGW' /> + </params> + </command> + <command id='no transcoder-mgw'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='transcoder-mgw' doc='Disable the transcoding' /> + </params> + </command> + <command id='transcoder-remote-base <0-65534>'> + <params> + <param name='transcoder-remote-base' doc='Set the base port for the transcoder' /> + <param name='<0-65534>' doc='The RTP base port on the transcoder' /> + </params> + </command> + <command id='sdp audio-payload number <1-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<1-255>' doc='Payload number' /> + </params> + </command> + <command id='sdp audio-payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='name' doc='Name' /> + <param name='NAME' doc='Payload name' /> + </params> + </command> + <command id='sdp audio payload number <1-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<1-255>' doc='Payload number' /> + </params> + </command> + <command id='sdp audio payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='name' doc='Name' /> + <param name='NAME' doc='Payload name' /> + </params> + </command> + <command id='loop (0|1)'> + <params> + <param name='loop' doc='Loop audio for all endpoints on main trunk' /> + <param name='0' doc='Don't Loop' /> + <param name='1' doc='Loop' /> + </params> + </command> + <command id='number endpoints <0-65534>'> + <params> + <param name='number' doc='Number options' /> + <param name='endpoints' doc='Endpoints available' /> + <param name='<0-65534>' doc='Number endpoints' /> + </params> + </command> + <command id='rtcp-omit'> + <params> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='no rtcp-omit'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='rtp-patch ssrc'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='no rtp-patch ssrc'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='rtp-patch timestamp'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch timestamp'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + </params> + </command> + <command id='sdp audio fmtp-extra .NAME'> + <params> + <param name='sdp' doc='Add extra fmtp for the SDP file' /> + <param name='audio' doc='Audio' /> + <param name='fmtp-extra' doc='Fmtp-extra' /> + <param name='.NAME' doc='Extra Information' /> + </params> + </command> + <command id='sdp audio-payload send-ptime'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + <command id='no sdp audio-payload send-ptime'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + <command id='trunk <1-64>'> + <params> + <param name='trunk' doc='Configure a SS7 trunk' /> + <param name='<1-64>' doc='Trunk Nr' /> + </params> + </command> + </node> + <node id='23'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='msc ip A.B.C.D'> + <params> + <param name='msc' doc='MSC related configuration' /> + <param name='ip' doc='Configure the IP address' /> + <param name='A.B.C.D' doc='IP information' /> + </params> + </command> + <command id='msc port <1-65500>'> + <params> + <param name='msc' doc='MSC related configuration' /> + <param name='port' doc='Configure the port' /> + <param name='<1-65500>' doc='Port number' /> + </params> + </command> + <command id='timeout auth <1-256>'> + <params> + <param name='timeout' doc='Timeout configuration' /> + <param name='auth' doc='Authentication timeout' /> + <param name='<1-256>' doc='Timeout in seconds' /> + </params> + </command> + <command id='timeout ping NR'> + <params> + <param name='timeout' doc='Timeout configuration' /> + <param name='ping' doc='Time between two pings' /> + <param name='NR' doc='Timeout in seconds' /> + </params> + </command> + <command id='timeout pong NR'> + <params> + <param name='timeout' doc='Timeout configuration' /> + <param name='pong' doc='Waiting for pong timeout' /> + <param name='NR' doc='Timeout in seconds' /> + </params> + </command> + <command id='token TOKEN'> + <params> + <param name='token' doc='Authentication token configuration' /> + <param name='TOKEN' doc='Token of the BSC, currently transferred in cleartext' /> + </params> + </command> + <command id='ip-dscp <0-255>'> + <params> + <param name='ip-dscp' doc='Set the IP DSCP for the BSCs to use' /> + <param name='<0-255>' doc='Set the IP_TOS attribute' /> + </params> + </command> + <command id='ip-tos <0-255>'> + <params> + <param name='ip-tos' doc='Use ip-dscp in the future.' /> + <param name='<0-255>' doc='Set the DSCP' /> + </params> + </command> + <command id='access-list-name NAME'> + <params> + <param name='access-list-name' doc='Set the name of the access list to use.' /> + <param name='NAME' doc='The name of the to be used access list.' /> + </params> + </command> + <command id='no access-list-name'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='access-list-name' doc='Remove the access list from the NAT.' /> + </params> + </command> + <command id='imsi-black-list-file-name NAME'> + <params> + <param name='imsi-black-list-file-name' doc='IMSI black listing' /> + <param name='NAME' doc='Filename IMSI and reject-cause' /> + </params> + </command> + <command id='no imsi-black-list-file-name'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='imsi-black-list-file-name' doc='Remove the imsi-black-list' /> + </params> + </command> + <command id='ussd-list-name NAME'> + <params> + <param name='ussd-list-name' doc='Set the name of the access list to check for IMSIs for USSD message' /> + <param name='NAME' doc='The name of the access list for HLR USSD handling' /> + </params> + </command> + <command id='ussd-query REGEXP'> + <params> + <param name='ussd-query' doc='Set the USSD query to match with the ussd-list-name' /> + <param name='REGEXP' doc='The query to match' /> + </params> + </command> + <command id='ussd-token TOKEN'> + <params> + <param name='ussd-token' doc='Set the token used to identify the USSD module' /> + <param name='TOKEN' doc='Secret key' /> + </params> + </command> + <command id='ussd-local-ip A.B.C.D'> + <params> + <param name='ussd-local-ip' doc='Set the IP to listen for the USSD Provider' /> + <param name='A.B.C.D' doc='IP Address' /> + </params> + </command> + <command id='use-msc-ipa-for-mgcp'> + <params> + <param name='use-msc-ipa-for-mgcp' doc='This needs to be set at start. Handle MGCP messages through the IPA protocol and not through the UDP socket.' /> + </params> + </command> + <command id='access-list NAME imsi-allow [REGEXP]'> + <params> + <param name='access-list' doc='Access list commands' /> + <param name='NAME' doc='Name of the access list' /> + <param name='imsi-allow' doc='Add allowed IMSI to the list' /> + <param name='[REGEXP]' doc='Regexp for IMSIs' /> + </params> + </command> + <command id='access-list NAME imsi-deny [REGEXP] (<0-256>) (<0-256>)'> + <params> + <param name='access-list' doc='Access list commands' /> + <param name='NAME' doc='Name of the access list' /> + <param name='imsi-deny' doc='Add denied IMSI to the list' /> + <param name='[REGEXP]' doc='Regexp for IMSIs' /> + <param name='<0-256>' doc='CM Service Reject reason' /> + <param name='<0-256>' doc='LU Reject reason' /> + </params> + </command> + <command id='no access-list NAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='access-list' doc='Remove an access-list by name' /> + <param name='NAME' doc='The access-list to remove' /> + </params> + </command> + <command id='number-rewrite FILENAME'> + <params> + <param name='number-rewrite' doc='Set the file with rewriting rules.' /> + <param name='FILENAME' doc='Filename' /> + </params> + </command> + <command id='no number-rewrite'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='number-rewrite' doc='Set the file with rewriting rules.' /> + </params> + </command> + <command id='number-rewrite-post FILENAME'> + <params> + <param name='number-rewrite-post' doc='Set the file with post-routing rewriting rules.' /> + <param name='FILENAME' doc='Filename' /> + </params> + </command> + <command id='no number-rewrite-post'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='number-rewrite-post' doc='Set the file with post-routing rewriting rules.' /> + </params> + </command> + <command id='rewrite-smsc addr FILENAME'> + <params> + <param name='rewrite-smsc' doc='SMSC Rewriting' /> + <param name='addr' doc='The SMSC Address to match and replace in RP-DATA' /> + <param name='FILENAME' doc='File with rules for the SMSC Address replacing' /> + </params> + </command> + <command id='rewrite-smsc tp-dest-match FILENAME'> + <params> + <param name='rewrite-smsc' doc='SMSC Rewriting' /> + <param name='tp-dest-match' doc='Match TP-Destination of a SMS.' /> + <param name='FILENAME' doc='File with rules for matching MSISDN and TP-DEST' /> + </params> + </command> + <command id='sms-clear-tp-srr FILENAME'> + <params> + <param name='sms-clear-tp-srr' doc='SMS TPDU Sender Report Request clearing' /> + <param name='FILENAME' doc='Files with rules for matching MSISDN' /> + </params> + </command> + <command id='no sms-clear-tp-srr'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sms-clear-tp-srr' doc='SMS TPDU Sender Report Request clearing' /> + </params> + </command> + <command id='sms-number-rewrite FILENAME'> + <params> + <param name='sms-number-rewrite' doc='SMS TP-DA Number rewriting' /> + <param name='FILENAME' doc='Files with rules for matching MSISDN' /> + </params> + </command> + <command id='no sms-number-rewrite'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sms-number-rewrite' doc='Disable SMS TP-DA rewriting' /> + </params> + </command> + <command id='prefix-tree FILENAME'> + <params> + <param name='prefix-tree' doc='Prefix tree for number rewriting' /> + <param name='FILENAME' doc='File to load' /> + </params> + </command> + <command id='no prefix-tree'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='prefix-tree' doc='Prefix tree for number rewriting' /> + </params> + </command> + <command id='paging-group <0-1000>'> + <params> + <param name='paging-group' doc='Create a Paging Group' /> + <param name='<0-1000>' doc='Number of the Group' /> + </params> + </command> + <command id='no paging-group <0-1000>'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='paging-group' doc='Delete paging-group' /> + <param name='<0-1000>' doc='Paging-group number' /> + </params> + </command> + <command id='bsc BSC_NR'> + <params> + <param name='bsc' doc='BSC configuration' /> + <param name='BSC_NR' doc='Identifier of the BSC' /> + </params> + </command> + </node> + <node id='24'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='token TOKEN'> + <params> + <param name='token' doc='Authentication token configuration' /> + <param name='TOKEN' doc='Token of the BSC, currently transferred in cleartext' /> + </params> + </command> + <command id='location_area_code <0-65535>'> + <params> + <param name='location_area_code' doc='Add the Location Area Code (LAC) of this BSC' /> + <param name='<0-65535>' doc='LAC' /> + </params> + </command> + <command id='no location_area_code <0-65535>'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='location_area_code' doc='Remove the Location Area Code (LAC) of this BSC' /> + <param name='<0-65535>' doc='LAC' /> + </params> + </command> + <command id='paging forbidden (0|1)'> + <params> + <param name='paging' doc='Paging' /> + <param name='forbidden' doc='Forbid sending PAGING REQUESTS to the BSC.' /> + <param name='0' doc='Do not forbid' /> + <param name='1' doc='Forbid' /> + </params> + </command> + <command id='description DESC'> + <params> + <param name='description' doc='Provide a description for the given BSC.' /> + <param name='DESC' doc='Description' /> + </params> + </command> + <command id='access-list-name NAME'> + <params> + <param name='access-list-name' doc='Set the name of the access list to use.' /> + <param name='NAME' doc='The name of the to be used access list.' /> + </params> + </command> + <command id='no access-list-name'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='access-list-name' doc='Do not use an access-list for the BSC.' /> + </params> + </command> + <command id='max-endpoints <1-1024>'> + <params> + <param name='max-endpoints' doc='Highest endpoint to use (exclusively)' /> + <param name='<1-1024>' doc='Number of ports' /> + </params> + </command> + <command id='paging-group <0-1000>'> + <params> + <param name='paging-group' doc='Use a paging group' /> + <param name='<0-1000>' doc='Paging Group to use' /> + </params> + </command> + <command id='paging group <0-1000>'> + <params> + <param name='paging' doc='Paging' /> + <param name='group' doc='Use a paging group' /> + <param name='<0-1000>' doc='Paging Group to use' /> + </params> + </command> + <command id='no paging group'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='paging' doc='Paging' /> + <param name='group' doc='Disable the usage of a paging group.' /> + </params> + </command> + </node> + <node id='27'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='rtp keep-alive <1-120>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='<1-120>' doc='Keep-alive interval in secs' /> + </params> + </command> + <command id='rtp keep-alive once'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='once' doc='Send dummy packet only once after CRCX/MDCX' /> + </params> + </command> + <command id='no rtp keep-alive'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + </params> + </command> + <command id='sdp audio-payload number <1-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<1-255>' doc='Payload Number' /> + </params> + </command> + <command id='sdp audio-payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='name' doc='Payload' /> + <param name='NAME' doc='Payload Name' /> + </params> + </command> + <command id='sdp audio payload number <1-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<1-255>' doc='Payload Number' /> + </params> + </command> + <command id='sdp audio payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='name' doc='Payload' /> + <param name='NAME' doc='Payload Name' /> + </params> + </command> + <command id='loop (0|1)'> + <params> + <param name='loop' doc='Loop audio for all endpoints on this trunk' /> + <param name='0' doc='Don't Loop' /> + <param name='1' doc='Loop' /> + </params> + </command> + <command id='rtcp-omit'> + <params> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='no rtcp-omit'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='rtp-patch ssrc'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='no rtp-patch ssrc'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='rtp-patch timestamp'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch timestamp'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + </params> + </command> + <command id='sdp audio fmtp-extra .NAME'> + <params> + <param name='sdp' doc='Add extra fmtp for the SDP file' /> + <param name='audio' doc='Audio' /> + <param name='fmtp-extra' doc='Fmtp-extra' /> + <param name='.NAME' doc='Extra Information' /> + </params> + </command> + <command id='sdp audio-payload send-ptime'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + <command id='no sdp audio-payload send-ptime'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + </node> + <node id='28'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='location_area_code <0-65535>'> + <params> + <param name='location_area_code' doc='Add the Location Area Code (LAC)' /> + <param name='<0-65535>' doc='LAC' /> + </params> + </command> + <command id='no location_area_code <0-65535>'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='location_area_code' doc='Remove the Location Area Code (LAC)' /> + <param name='<0-65535>' doc='LAC' /> + </params> + </command> + </node> +</vtydoc> \ No newline at end of file -- To view, visit https://gerrit.osmocom.org/12010 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: openbsc Gerrit-Branch: master Gerrit-MessageType: newchange Gerrit-Change-Id: Ibace91bc518079765e12529596a1763b6c5a04b5 Gerrit-Change-Number: 12010 Gerrit-PatchSet: 1 Gerrit-Owner: osmith <osmith at sysmocom.de> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181129/71b02fa0/attachment.htm>