This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Neels Hofmeyr gerrit-no-reply at lists.osmocom.orgNeels Hofmeyr has submitted this change and it was merged. ( https://gerrit.osmocom.org/11969 ) Change subject: remove OsmoSTP files (now avail in libosmo-sccp.git) ...................................................................... remove OsmoSTP files (now avail in libosmo-sccp.git) Files were added in libosmo-sccp.git Change-Id Ib5a22c2ea81fdde036bf9efb47d785a830b88c93 Depends: libosmo-sccp.git Change-Id Ib5a22c2ea81fdde036bf9efb47d785a830b88c93 Related: OS#3385 Change-Id: I971ef93a675412ea27d8bf193db6b9b35428f0bc --- M Makefile.am D OsmoSTP/Makefile.am D OsmoSTP/chapters/overview.adoc D OsmoSTP/osmostp-usermanual-docinfo.xml D OsmoSTP/osmostp-usermanual.adoc D OsmoSTP/osmostp-vty-reference.xml D OsmoSTP/vty/osmo-stp_vty_reference.xml M configure.ac 8 files changed, 0 insertions(+), 1,669 deletions(-) Approvals: Jenkins Builder: Verified Pau Espin Pedrol: Looks good to me, but someone else must approve diff --git a/Makefile.am b/Makefile.am index 6c2879f..eb86032 100644 --- a/Makefile.am +++ b/Makefile.am @@ -10,7 +10,6 @@ OsmoMGCP \ OsmoNAT \ OsmoNITB \ - OsmoSTP \ OsmoTRX \ OsmocomBB diff --git a/OsmoSTP/Makefile.am b/OsmoSTP/Makefile.am deleted file mode 100644 index eb4ec9d..0000000 --- a/OsmoSTP/Makefile.am +++ /dev/null @@ -1,16 +0,0 @@ -OSMO_GSM_MANUALS_DIR = $(top_srcdir) -EXTRA_DIST = osmostp-usermanual.adoc \ - osmostp-usermanual-docinfo.xml \ - osmostp-vty-reference.xml \ - chapters \ - vty - -ASCIIDOC = osmostp-usermanual.adoc -include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.asciidoc.inc -osmostp-usermanual.pdf: $(srcdir)/chapters/*.adoc -aoip-mgw-options.pdf: $(srcdir)/aoip-mgw-options.adoc $(srcdir)/mgw/*.msc - -VTY_REFERENCE = osmostp-vty-reference.xml -include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc - -include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc diff --git a/OsmoSTP/chapters/overview.adoc b/OsmoSTP/chapters/overview.adoc deleted file mode 100644 index e69de29..0000000 --- a/OsmoSTP/chapters/overview.adoc +++ /dev/null diff --git a/OsmoSTP/osmostp-usermanual-docinfo.xml b/OsmoSTP/osmostp-usermanual-docinfo.xml deleted file mode 100644 index 4253957..0000000 --- a/OsmoSTP/osmostp-usermanual-docinfo.xml +++ /dev/null @@ -1,47 +0,0 @@ -<revhistory> - <revision> - <revnumber>1</revnumber> - <date>April 16, 2017</date> - <authorinitials>HW</authorinitials> - <revremark> - Initial OsmoSTP manual - </revremark> - </revision> -</revhistory> - -<authorgroup> - <author> - <firstname>Harald</firstname> - <surname>Welte</surname> - <email>hwelte at sysmocom.de</email> - <authorinitials>HW</authorinitials> - <affiliation> - <shortaffil>sysmocom</shortaffil> - <orgname>sysmocom - s.f.m.c. GmbH</orgname> - <jobtitle>Managing Director</jobtitle> - </affiliation> - </author> -</authorgroup> - -<copyright> - <year>2012-2017</year> - <holder>sysmocom - s.f.m.c. GmbH</holder> -</copyright> - -<legalnotice> - <para> - Permission is granted to copy, distribute and/or modify this - document under the terms of the GNU Free Documentation License, - Version 1.3 or any later version published by the Free Software - Foundation; with the Invariant Sections being just 'Foreword', - 'Acknowledgements' and 'Preface', with no Front-Cover Texts, - and no Back-Cover Texts. A copy of the license is included in - the section entitled "GNU Free Documentation License". - </para> - <para> - The Asciidoc source code of this manual can be found at - <ulink url="http://git.osmocom.org/osmo-gsm-manuals/"> - http://git.osmocom.org/osmo-gsm-manuals/ - </ulink> - </para> -</legalnotice> diff --git a/OsmoSTP/osmostp-usermanual.adoc b/OsmoSTP/osmostp-usermanual.adoc deleted file mode 100644 index 9f41e5d..0000000 --- a/OsmoSTP/osmostp-usermanual.adoc +++ /dev/null @@ -1,34 +0,0 @@ -OsmoSTP User Manual -=================== -Harald Welte <hwelte at sysmocom.de> - - -include::./common/chapters/preface.adoc[] - -// include::{srcdir}/chapters/overview.adoc[] - -include::./common/chapters/sigtran.adoc[] - -include::./common/chapters/sigtran-osmocom.adoc[] - -//include::{srcdir}/chapters/running.adoc[] -// include::{srcdir}/chapters/control.adoc[] - -include::./common/chapters/vty.adoc[] - -include::./common/chapters/logging.adoc[] - -//include::./common/chapters/bts.adoc[] - -//include::../OsmoNITB/chapters/bts-examples.adoc[] - -//include::./common/chapters/control_if.adoc[] - -include::./common/chapters/port_numbers.adoc[] - -include::./common/chapters/bibliography.adoc[] - -include::./common/chapters/glossary.adoc[] - -include::./common/chapters/gfdl.adoc[] - diff --git a/OsmoSTP/osmostp-vty-reference.xml b/OsmoSTP/osmostp-vty-reference.xml deleted file mode 100644 index ae0f7b0..0000000 --- a/OsmoSTP/osmostp-vty-reference.xml +++ /dev/null @@ -1,38 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- - ex:ts=2:sw=42sts=2:et - -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*- ---> -<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN" -"http://docbook.org/xml/5.0/dtd/docbook.dtd" [ -<!ENTITY chapter-vty SYSTEM "./common/chapters/vty.xml" > -<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" > -]> - -<book> - <info> - <revhistory> - <revision> - <revnumber>v1</revnumber> - <date>April 16, 2017</date> - <authorinitials>h2</authorinitials> - <revremark>Initial</revremark> - </revision> - </revhistory> - - <title>OsmoSTP VTY Reference</title> - - <copyright> - <year>2012-2017</year> - </copyright> - - <legalnotice> - <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved. - </para> - </legalnotice> - </info> - - <!-- Main chapters--> - &chapter-vty; -</book> - diff --git a/OsmoSTP/vty/osmo-stp_vty_reference.xml b/OsmoSTP/vty/osmo-stp_vty_reference.xml deleted file mode 100644 index 308c369..0000000 --- a/OsmoSTP/vty/osmo-stp_vty_reference.xml +++ /dev/null @@ -1,1532 +0,0 @@ -<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> - <node id='_common_cmds_'> - <name>Common Commands</name> - <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description> - <command id='help'> - <params> - <param name='help' doc='Description of the interactive help system' /> - </params> - </command> - <command id='list'> - <params> - <param name='list' doc='Print command list' /> - </params> - </command> - <command id='write terminal'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='terminal' doc='Write to terminal' /> - </params> - </command> - <command id='write file'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='file' doc='Write to configuration file' /> - </params> - </command> - <command id='write memory'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - <param name='memory' doc='Write configuration to the file (same as write file)' /> - </params> - </command> - <command id='write'> - <params> - <param name='write' doc='Write running configuration to memory, network, or terminal' /> - </params> - </command> - <command id='show running-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='running-config' doc='running configuration' /> - </params> - </command> - <command id='exit'> - <params> - <param name='exit' doc='Exit current mode and down to previous mode' /> - </params> - </command> - <command id='end'> - <params> - <param name='end' doc='End current mode and change to enable mode.' /> - </params> - </command> - </node> - <node id='view'> - <name>view</name> - <command id='show version'> - <params> - <param name='show' doc='Show running system information' /> - <param name='version' doc='Displays program version' /> - </params> - </command> - <command id='show online-help'> - <params> - <param name='show' doc='Show running system information' /> - <param name='online-help' doc='Online help' /> - </params> - </command> - <command id='enable'> - <params> - <param name='enable' doc='Turn on privileged mode command' /> - </params> - </command> - <command id='terminal length <0-512>'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='length' doc='Set number of lines on a screen' /> - <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> - </params> - </command> - <command id='terminal no length'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='length' doc='Set number of lines on a screen' /> - </params> - </command> - <command id='who'> - <params> - <param name='who' doc='Display who is on vty' /> - </params> - </command> - <command id='show history'> - <params> - <param name='show' doc='Show running system information' /> - <param name='history' doc='Display the session command history' /> - </params> - </command> - <command id='logging enable'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='enable' doc='Enables logging to this vty' /> - </params> - </command> - <command id='logging disable'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='disable' doc='Disables logging to this vty' /> - </params> - </command> - <command id='logging filter all (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='filter' doc='Filter log messages' /> - <param name='all' doc='Do you want to log all messages?' /> - <param name='0' doc='Only print messages matched by other filters' /> - <param name='1' doc='Bypass filter and print all messages' /> - </params> - </command> - <command id='logging color (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='color' doc='Configure color-printing for log messages' /> - <param name='0' doc='Don't use color for printing messages' /> - <param name='1' doc='Use color for printing messages' /> - </params> - </command> - <command id='logging timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp' /> - </params> - </command> - <command id='logging print extended-timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='extended-timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> - </params> - </command> - <command id='logging print category (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem name' /> - </params> - </command> - <command id='logging print category-hex (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category-hex' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> - </params> - </command> - <command id='logging print level (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='level' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the log level name' /> - </params> - </command> - <command id='logging print file (0|1|basename) [last]'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='file' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the source file and line' /> - <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> - <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> - </params> - </command> - <command id='logging set-log-mask MASK'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='set-log-mask' doc='Set the logmask of this logging target' /> - <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> - </params> - </command> - <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='lglobal' doc='Library-internal global log family' /> - <param name='llapd' doc='LAPD in libosmogsm' /> - <param name='linp' doc='A-bis Intput Subsystem' /> - <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> - <param name='lmi' doc='A-bis Input Driver for Signalling' /> - <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> - <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> - <param name='lctrl' doc='Control Interface' /> - <param name='lgtp' doc='GPRS GTP library' /> - <param name='lstats' doc='Statistics messages and logging' /> - <param name='lgsup' doc='Generic Subscriber Update Protocol' /> - <param name='loap' doc='Osmocom Authentication Protocol' /> - <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> - <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> - <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> - <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> - <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> - <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level set-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level force-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='no logging level force-all'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> - </params> - </command> - <command id='show logging vty'> - <params> - <param name='show' doc='Show running system information' /> - <param name='logging' doc='Show current logging configuration' /> - <param name='vty' doc='Show current logging configuration for this vty' /> - </params> - </command> - <command id='show alarms'> - <params> - <param name='show' doc='Show running system information' /> - <param name='alarms' doc='Show current logging configuration' /> - </params> - </command> - <command id='show cs7 instance <0-15> users'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='users' doc='User Table' /> - </params> - </command> - <command id='show cs7 (sua|m3ua|ipa) [<0-65534>]'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='sua' doc='SCCP User Adaptation' /> - <param name='m3ua' doc='MTP3 User Adaptation' /> - <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> - <param name='[<0-65534>]' doc='Port Number' /> - </params> - </command> - <command id='show cs7 instance <0-15> asp'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='asp' doc='Application Server Process (ASP)' /> - </params> - </command> - <command id='show cs7 instance <0-15> as (active|all|m3ua|sua)'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='as' doc='Application Server (AS)' /> - <param name='active' doc='Display all active ASs' /> - <param name='all' doc='Display all ASs (default)' /> - <param name='m3ua' doc='Display all m3ua ASs' /> - <param name='sua' doc='Display all SUA ASs' /> - </params> - </command> - <command id='show cs7 instance <0-15> sccp addressbook'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='sccp' doc='Signalling Connection Control Part' /> - <param name='addressbook' doc='List all SCCP addressbook entries' /> - </params> - </command> - <command id='show cs7 instance <0-15> route'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='route' doc='Routing Table' /> - </params> - </command> - <command id='show cs7 instance <0-15> sccp users'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='sccp' doc='Signalling Connection Control Part' /> - <param name='users' doc='Show List of SCCP Users registered' /> - </params> - </command> - <command id='show cs7 instance <0-15> sccp ssn <0-65535>'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='sccp' doc='Signalling Connection Control Part' /> - <param name='ssn' doc='Find an SCCP User registered for the given SSN' /> - <param name='<0-65535>' doc='Subsystem Number (SSN)' /> - </params> - </command> - <command id='show cs7 instance <0-15> sccp connections'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='sccp' doc='Signalling Connection Control Part' /> - <param name='connections' doc='Show List of active SCCP connections' /> - </params> - </command> - <command id='show cs7 instance <0-15> sccp timers'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='sccp' doc='Signaling Connection Control Part' /> - <param name='timers' doc='Show List of SCCP timers' /> - </params> - </command> - <command id='show fsm NAME'> - <params> - <param name='show' doc='Show running system information' /> - <param name='fsm' doc='Show information about finite state machines' /> - <param name='NAME' doc='Display information about a single named finite state machine' /> - </params> - </command> - <command id='show fsm all'> - <params> - <param name='show' doc='Show running system information' /> - <param name='fsm' doc='Show information about finite state machines' /> - <param name='all' doc='Display a list of all registered finite state machines' /> - </params> - </command> - <command id='show fsm-instances NAME'> - <params> - <param name='show' doc='Show running system information' /> - <param name='fsm-instances' doc='Show information about finite state machine instances' /> - <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' /> - </params> - </command> - <command id='show fsm-instances all'> - <params> - <param name='show' doc='Show running system information' /> - <param name='fsm-instances' doc='Show information about finite state machine instances' /> - <param name='all' doc='Display a list of all FSM instances of all finite state machine' /> - </params> - </command> - </node> - <node id='enable'> - <name>enable</name> - <command id='disable'> - <params> - <param name='disable' doc='Turn off privileged mode command' /> - </params> - </command> - <command id='configure terminal'> - <params> - <param name='configure' doc='Configuration from vty interface' /> - <param name='terminal' doc='Configuration terminal' /> - </params> - </command> - <command id='copy running-config startup-config'> - <params> - <param name='copy' doc='Copy configuration' /> - <param name='running-config' doc='Copy running config to... ' /> - <param name='startup-config' doc='Copy running config to startup config (same as write file)' /> - </params> - </command> - <command id='show startup-config'> - <params> - <param name='show' doc='Show running system information' /> - <param name='startup-config' doc='Contentes of startup configuration' /> - </params> - </command> - <command id='show version'> - <params> - <param name='show' doc='Show running system information' /> - <param name='version' doc='Displays program version' /> - </params> - </command> - <command id='show online-help'> - <params> - <param name='show' doc='Show running system information' /> - <param name='online-help' doc='Online help' /> - </params> - </command> - <command id='terminal length <0-512>'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='length' doc='Set number of lines on a screen' /> - <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> - </params> - </command> - <command id='terminal no length'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='length' doc='Set number of lines on a screen' /> - </params> - </command> - <command id='who'> - <params> - <param name='who' doc='Display who is on vty' /> - </params> - </command> - <command id='show history'> - <params> - <param name='show' doc='Show running system information' /> - <param name='history' doc='Display the session command history' /> - </params> - </command> - <command id='terminal monitor'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='monitor' doc='Copy debug output to the current terminal line' /> - </params> - </command> - <command id='terminal no monitor'> - <params> - <param name='terminal' doc='Set terminal line parameters' /> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='monitor' doc='Copy debug output to the current terminal line' /> - </params> - </command> - <command id='logging enable'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='enable' doc='Enables logging to this vty' /> - </params> - </command> - <command id='logging disable'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='disable' doc='Disables logging to this vty' /> - </params> - </command> - <command id='logging filter all (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='filter' doc='Filter log messages' /> - <param name='all' doc='Do you want to log all messages?' /> - <param name='0' doc='Only print messages matched by other filters' /> - <param name='1' doc='Bypass filter and print all messages' /> - </params> - </command> - <command id='logging color (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='color' doc='Configure color-printing for log messages' /> - <param name='0' doc='Don't use color for printing messages' /> - <param name='1' doc='Use color for printing messages' /> - </params> - </command> - <command id='logging timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp' /> - </params> - </command> - <command id='logging print extended-timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='extended-timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> - </params> - </command> - <command id='logging print category (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem name' /> - </params> - </command> - <command id='logging print category-hex (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category-hex' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> - </params> - </command> - <command id='logging print level (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='level' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the log level name' /> - </params> - </command> - <command id='logging print file (0|1|basename) [last]'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='file' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the source file and line' /> - <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> - <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> - </params> - </command> - <command id='logging set-log-mask MASK'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='set-log-mask' doc='Set the logmask of this logging target' /> - <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> - </params> - </command> - <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='lglobal' doc='Library-internal global log family' /> - <param name='llapd' doc='LAPD in libosmogsm' /> - <param name='linp' doc='A-bis Intput Subsystem' /> - <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> - <param name='lmi' doc='A-bis Input Driver for Signalling' /> - <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> - <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> - <param name='lctrl' doc='Control Interface' /> - <param name='lgtp' doc='GPRS GTP library' /> - <param name='lstats' doc='Statistics messages and logging' /> - <param name='lgsup' doc='Generic Subscriber Update Protocol' /> - <param name='loap' doc='Osmocom Authentication Protocol' /> - <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> - <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> - <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> - <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> - <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> - <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level set-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level force-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='no logging level force-all'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> - </params> - </command> - <command id='show logging vty'> - <params> - <param name='show' doc='Show running system information' /> - <param name='logging' doc='Show current logging configuration' /> - <param name='vty' doc='Show current logging configuration for this vty' /> - </params> - </command> - <command id='show alarms'> - <params> - <param name='show' doc='Show running system information' /> - <param name='alarms' doc='Show current logging configuration' /> - </params> - </command> - <command id='show cs7 instance <0-15> users'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='users' doc='User Table' /> - </params> - </command> - <command id='show cs7 (sua|m3ua|ipa) [<0-65534>]'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='sua' doc='SCCP User Adaptation' /> - <param name='m3ua' doc='MTP3 User Adaptation' /> - <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> - <param name='[<0-65534>]' doc='Port Number' /> - </params> - </command> - <command id='show cs7 instance <0-15> asp'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='asp' doc='Application Server Process (ASP)' /> - </params> - </command> - <command id='show cs7 instance <0-15> as (active|all|m3ua|sua)'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='as' doc='Application Server (AS)' /> - <param name='active' doc='Display all active ASs' /> - <param name='all' doc='Display all ASs (default)' /> - <param name='m3ua' doc='Display all m3ua ASs' /> - <param name='sua' doc='Display all SUA ASs' /> - </params> - </command> - <command id='show cs7 instance <0-15> sccp addressbook'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='sccp' doc='Signalling Connection Control Part' /> - <param name='addressbook' doc='List all SCCP addressbook entries' /> - </params> - </command> - <command id='show cs7 instance <0-15> route'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='route' doc='Routing Table' /> - </params> - </command> - <command id='show cs7 instance <0-15> sccp users'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='sccp' doc='Signalling Connection Control Part' /> - <param name='users' doc='Show List of SCCP Users registered' /> - </params> - </command> - <command id='show cs7 instance <0-15> sccp ssn <0-65535>'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='sccp' doc='Signalling Connection Control Part' /> - <param name='ssn' doc='Find an SCCP User registered for the given SSN' /> - <param name='<0-65535>' doc='Subsystem Number (SSN)' /> - </params> - </command> - <command id='show cs7 instance <0-15> sccp connections'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='sccp' doc='Signalling Connection Control Part' /> - <param name='connections' doc='Show List of active SCCP connections' /> - </params> - </command> - <command id='show cs7 instance <0-15> sccp timers'> - <params> - <param name='show' doc='Show running system information' /> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='An instance of the SS7 stack' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - <param name='sccp' doc='Signaling Connection Control Part' /> - <param name='timers' doc='Show List of SCCP timers' /> - </params> - </command> - <command id='show fsm NAME'> - <params> - <param name='show' doc='Show running system information' /> - <param name='fsm' doc='Show information about finite state machines' /> - <param name='NAME' doc='Display information about a single named finite state machine' /> - </params> - </command> - <command id='show fsm all'> - <params> - <param name='show' doc='Show running system information' /> - <param name='fsm' doc='Show information about finite state machines' /> - <param name='all' doc='Display a list of all registered finite state machines' /> - </params> - </command> - <command id='show fsm-instances NAME'> - <params> - <param name='show' doc='Show running system information' /> - <param name='fsm-instances' doc='Show information about finite state machine instances' /> - <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' /> - </params> - </command> - <command id='show fsm-instances all'> - <params> - <param name='show' doc='Show running system information' /> - <param name='fsm-instances' doc='Show information about finite state machine instances' /> - <param name='all' doc='Display a list of all FSM instances of all finite state machine' /> - </params> - </command> - </node> - <node id='config'> - <name>config</name> - <command id='hostname WORD'> - <params> - <param name='hostname' doc='Set system's network name' /> - <param name='WORD' doc='This system's network name' /> - </params> - </command> - <command id='no hostname [HOSTNAME]'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='hostname' doc='Reset system's network name' /> - <param name='[HOSTNAME]' doc='Host name of this router' /> - </params> - </command> - <command id='password (8|) WORD'> - <params> - <param name='password' doc='Assign the terminal connection password' /> - <param name='8' doc='Specifies a HIDDEN password will follow' /> - <param name='' doc='dummy string ' /> - <param name='WORD' doc='The HIDDEN line password string' /> - </params> - </command> - <command id='password LINE'> - <params> - <param name='password' doc='Assign the terminal connection password' /> - <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> - </params> - </command> - <command id='enable password (8|) WORD'> - <params> - <param name='enable' doc='Modify enable password parameters' /> - <param name='password' doc='Assign the privileged level password' /> - <param name='8' doc='Specifies a HIDDEN password will follow' /> - <param name='' doc='dummy string ' /> - <param name='WORD' doc='The HIDDEN 'enable' password string' /> - </params> - </command> - <command id='enable password LINE'> - <params> - <param name='enable' doc='Modify enable password parameters' /> - <param name='password' doc='Assign the privileged level password' /> - <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> - </params> - </command> - <command id='no enable password'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='enable' doc='Modify enable password parameters' /> - <param name='password' doc='Assign the privileged level password' /> - </params> - </command> - <command id='banner motd default'> - <params> - <param name='banner' doc='Set banner string' /> - <param name='motd' doc='Strings for motd' /> - <param name='default' doc='Default string' /> - </params> - </command> - <command id='banner motd file [FILE]'> - <params> - <param name='banner' doc='Set banner' /> - <param name='motd' doc='Banner for motd' /> - <param name='file' doc='Banner from a file' /> - <param name='[FILE]' doc='Filename' /> - </params> - </command> - <command id='no banner motd'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='banner' doc='Set banner string' /> - <param name='motd' doc='Strings for motd' /> - </params> - </command> - <command id='service terminal-length <0-512>'> - <params> - <param name='service' doc='Set up miscellaneous service' /> - <param name='terminal-length' doc='System wide terminal length configuration' /> - <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> - </params> - </command> - <command id='no service terminal-length [<0-512>]'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='service' doc='Set up miscellaneous service' /> - <param name='terminal-length' doc='System wide terminal length configuration' /> - <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> - </params> - </command> - <command id='line vty'> - <params> - <param name='line' doc='Configure a terminal line' /> - <param name='vty' doc='Virtual terminal' /> - </params> - </command> - <command id='service advanced-vty'> - <params> - <param name='service' doc='Set up miscellaneous service' /> - <param name='advanced-vty' doc='Enable advanced mode vty interface' /> - </params> - </command> - <command id='no service advanced-vty'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='service' doc='Set up miscellaneous service' /> - <param name='advanced-vty' doc='Enable advanced mode vty interface' /> - </params> - </command> - <command id='show history'> - <params> - <param name='show' doc='Show running system information' /> - <param name='history' doc='Display the session command history' /> - </params> - </command> - <command id='log stderr'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='stderr' doc='Logging via STDERR of the process' /> - </params> - </command> - <command id='no log stderr'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='log' doc='Configure logging sub-system' /> - <param name='stderr' doc='Logging via STDERR of the process' /> - </params> - </command> - <command id='log file .FILENAME'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='file' doc='Logging to text file' /> - <param name='.FILENAME' doc='Filename' /> - </params> - </command> - <command id='no log file .FILENAME'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='log' doc='Configure logging sub-system' /> - <param name='file' doc='Logging to text file' /> - <param name='.FILENAME' doc='Filename' /> - </params> - </command> - <command id='log alarms <2-32700>'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='alarms' doc='Logging alarms to osmo_strrb' /> - <param name='<2-32700>' doc='Maximum number of messages to log' /> - </params> - </command> - <command id='no log alarms'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='log' doc='Configure logging sub-system' /> - <param name='alarms' doc='Logging alarms to osmo_strrb' /> - </params> - </command> - <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='syslog' doc='Logging via syslog' /> - <param name='authpriv' doc='Security/authorization messages facility' /> - <param name='cron' doc='Clock daemon (cron/at) facility' /> - <param name='daemon' doc='General system daemon facility' /> - <param name='ftp' doc='Ftp daemon facility' /> - <param name='lpr' doc='Line printer facility' /> - <param name='mail' doc='Mail facility' /> - <param name='news' doc='News facility' /> - <param name='user' doc='Generic facility' /> - <param name='uucp' doc='UUCP facility' /> - </params> - </command> - <command id='log syslog local <0-7>'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='syslog' doc='Logging via syslog' /> - <param name='local' doc='Syslog LOCAL facility' /> - <param name='<0-7>' doc='Local facility number' /> - </params> - </command> - <command id='no log syslog'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='log' doc='Configure logging sub-system' /> - <param name='syslog' doc='Logging via syslog' /> - </params> - </command> - <command id='log gsmtap [HOSTNAME]'> - <params> - <param name='log' doc='Configure logging sub-system' /> - <param name='gsmtap' doc='Logging via GSMTAP' /> - <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' /> - </params> - </command> - <command id='cs7 instance <0-15>'> - <params> - <param name='cs7' doc='ITU-T Signaling System 7' /> - <param name='instance' doc='Configure a SS7 Instance' /> - <param name='<0-15>' doc='An instance of the SS7 stack' /> - </params> - </command> - </node> - <node id='config-log'> - <name>config-log</name> - <command id='logging filter all (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='filter' doc='Filter log messages' /> - <param name='all' doc='Do you want to log all messages?' /> - <param name='0' doc='Only print messages matched by other filters' /> - <param name='1' doc='Bypass filter and print all messages' /> - </params> - </command> - <command id='logging color (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='color' doc='Configure color-printing for log messages' /> - <param name='0' doc='Don't use color for printing messages' /> - <param name='1' doc='Use color for printing messages' /> - </params> - </command> - <command id='logging timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp' /> - </params> - </command> - <command id='logging print extended-timestamp (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='extended-timestamp' doc='Configure log message timestamping' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> - </params> - </command> - <command id='logging print category (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem name' /> - </params> - </command> - <command id='logging print category-hex (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='category-hex' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> - </params> - </command> - <command id='logging print level (0|1)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='level' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the log level name' /> - </params> - </command> - <command id='logging print file (0|1|basename) [last]'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='print' doc='Log output settings' /> - <param name='file' doc='Configure log message' /> - <param name='0' doc='Don't prefix each log message' /> - <param name='1' doc='Prefix each log message with the source file and line' /> - <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> - <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> - </params> - </command> - <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='lglobal' doc='Library-internal global log family' /> - <param name='llapd' doc='LAPD in libosmogsm' /> - <param name='linp' doc='A-bis Intput Subsystem' /> - <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> - <param name='lmi' doc='A-bis Input Driver for Signalling' /> - <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> - <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> - <param name='lctrl' doc='Control Interface' /> - <param name='lgtp' doc='GPRS GTP library' /> - <param name='lstats' doc='Statistics messages and logging' /> - <param name='lgsup' doc='Generic Subscriber Update Protocol' /> - <param name='loap' doc='Osmocom Authentication Protocol' /> - <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> - <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> - <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> - <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> - <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> - <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level set-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='logging level force-all (debug|info|notice|error|fatal)'> - <params> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> - <param name='debug' doc='Log debug messages and higher levels' /> - <param name='info' doc='Log informational messages and higher levels' /> - <param name='notice' doc='Log noticeable messages and higher levels' /> - <param name='error' doc='Log error messages and higher levels' /> - <param name='fatal' doc='Log only fatal messages' /> - </params> - </command> - <command id='no logging level force-all'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='logging' doc='Configure logging' /> - <param name='level' doc='Set the log level for a specified category' /> - <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> - </params> - </command> - </node> - <node id='config-line'> - <name>config-line</name> - <command id='login'> - <params> - <param name='login' doc='Enable password checking' /> - </params> - </command> - <command id='no login'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='login' doc='Enable password checking' /> - </params> - </command> - <command id='bind A.B.C.D'> - <params> - <param name='bind' doc='Accept VTY telnet connections on local interface' /> - <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' /> - </params> - </command> - </node> - <node id='config-cs7'> - <name>config-cs7</name> - <command id='description .TEXT'> - <params> - <param name='description' doc='Save human-readable description of the object' /> - <param name='.TEXT' doc='Text until the end of the line' /> - </params> - </command> - <command id='network-indicator (international | national | reserved | spare)'> - <params> - <param name='network-indicator' doc='Configure the Network Indicator' /> - <param name='international' doc='International Network' /> - <param name='national' doc='National Network' /> - <param name='reserved' doc='Reserved Network' /> - <param name='spare' doc='Spare Network' /> - </params> - </command> - <command id='point-code POINT_CODE'> - <params> - <param name='point-code' doc='Configure the local Point Code' /> - <param name='POINT_CODE' doc='Point Code' /> - </params> - </command> - <command id='point-code format <1-24> [<1-23>] [<1-22>]'> - <params> - <param name='point-code' doc='Point Code' /> - <param name='format' doc='Configure Point Code Format' /> - <param name='<1-24>' doc='Length of first PC component' /> - <param name='[<1-23>]' doc='Length of second PC component' /> - <param name='[<1-22>]' doc='Length of third PC component' /> - </params> - </command> - <command id='point-code format default'> - <params> - <param name='point-code' doc='Point Code' /> - <param name='format' doc='Configure Point Code Format' /> - <param name='default' doc='Default Point Code Format (3.8.3)' /> - </params> - </command> - <command id='point-code delimiter (default|dash)'> - <params> - <param name='point-code' doc='Point Code' /> - <param name='delimiter' doc='Configure Point Code Delimiter' /> - <param name='default' doc='Use dot as delimiter' /> - <param name='dash' doc='User dash as delimiter' /> - </params> - </command> - <command id='xua rkm routing-key-allocation (static-only|dynamic-permitted)'> - <params> - <param name='xua' doc='SIGTRAN xxxUA related' /> - <param name='rkm' doc='Routing Key Management' /> - <param name='routing-key-allocation' doc='Routing Key Management Allocation Policy' /> - <param name='static-only' doc='Only static (pre-confgured) Routing Keys permitted' /> - <param name='dynamic-permitted' doc='Dynamically allocate Routing Keys for what ASPs request' /> - </params> - </command> - <command id='asp NAME <0-65535> <0-65535> (sua|m3ua|ipa)'> - <params> - <param name='asp' doc='Configure Application Server Process' /> - <param name='NAME' doc='Name of ASP' /> - <param name='<0-65535>' doc='Remote SCTP port number' /> - <param name='<0-65535>' doc='Local SCTP port number' /> - <param name='sua' doc='SCCP User Adaptation' /> - <param name='m3ua' doc='MTP3 User Adaptation' /> - <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> - </params> - </command> - <command id='no asp NAME'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='asp' doc='Disable Application Server Process' /> - <param name='NAME' doc='Name of ASP' /> - </params> - </command> - <command id='as NAME (sua|m3ua|ipa)'> - <params> - <param name='as' doc='Configure an Application Server' /> - <param name='NAME' doc='Name of the Application Server' /> - <param name='sua' doc='SCCP User Adaptation' /> - <param name='m3ua' doc='MTP3 User Adaptation' /> - <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> - </params> - </command> - <command id='no as NAME'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='as' doc='Disable Application Server' /> - <param name='NAME' doc='Name of AS' /> - </params> - </command> - <command id='sccp-address NAME'> - <params> - <param name='sccp-address' doc='Create/Modify an SCCP addressbook entry' /> - <param name='NAME' doc='Name of the SCCP Address' /> - </params> - </command> - <command id='no sccp-address NAME'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='sccp-address' doc='Delete an SCCP addressbook entry' /> - <param name='NAME' doc='Name of the SCCP Address' /> - </params> - </command> - <command id='route-table system'> - <params> - <param name='route-table' doc='Specify the name of the route table' /> - <param name='system' doc='Name of the route table' /> - </params> - </command> - <command id='listen (sua|m3ua|ipa) <0-65534>'> - <params> - <param name='listen' doc='Configure/Enable xUA Listener' /> - <param name='sua' doc='SCCP User Adaptation' /> - <param name='m3ua' doc='MTP3 User Adaptation' /> - <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> - <param name='<0-65534>' doc='SCTP Port number' /> - </params> - </command> - <command id='no listen (sua|m3ua|ipa) <0-65534>'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='listen' doc='Disable xUA Listener on given SCTP Port' /> - <param name='sua' doc='SCCP User Adaptation' /> - <param name='m3ua' doc='MTP3 User Adaptation' /> - <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> - <param name='<0-65534>' doc='SCTP Port number' /> - </params> - </command> - <command id='sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) <1-999999>'> - <params> - <param name='sccp-timer' doc='Configure SCCP timer values, see ITU-T Q.714' /> - <param name='conn_est' doc='Waiting for connection confirm message, 1 to 2 minutes (default: 60)' /> - <param name='ias' doc='Send keep-alive: on an idle connection, delay before sending an Idle Timer message, 5 to 10 minutes (default: 420)' /> - <param name='iar' doc='Receive keep-alive: on an idle connection, delay until considering a connection as stale, 11 to 21 minutes (default: 900)' /> - <param name='rel' doc='Waiting for release complete message, 10 to 20 seconds (default: 10)' /> - <param name='repeat_rel' doc='Waiting for release complete message; or to repeat sending released message after the initial expiry, 10 to 20 seconds (default: 10)' /> - <param name='int' doc='Waiting for release complete message; or to release connection resources, freeze the LRN and alert a maintenance function after the initial expiry, extending to 1 minute (default: 60)' /> - <param name='guard' doc='Waiting to resume normal procedure for temporary connection sections during the restart procedure, 23 to 25 minutes (default: 1380)' /> - <param name='reset' doc='Waiting to release temporary connection section or alert maintenance function after reset request message is sent, 10 to 20 seconds (default: 10)' /> - <param name='reassembly' doc='Waiting to receive all the segments of the remaining segments, single segmented message after receiving the first segment, 10 to 20 seconds (default: 10)' /> - <param name='<1-999999>' doc='Timer value, in seconds' /> - </params> - </command> - </node> - <node id='config-cs7-as'> - <name>config-cs7-as</name> - <command id='description .TEXT'> - <params> - <param name='description' doc='Save human-readable description of the object' /> - <param name='.TEXT' doc='Text until the end of the line' /> - </params> - </command> - <command id='asp NAME'> - <params> - <param name='asp' doc='Specify that a given ASP is part of this AS' /> - <param name='NAME' doc='Name of ASP to be added to AS' /> - </params> - </command> - <command id='no asp NAME'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='asp' doc='Specify ASP to be removed from this AS' /> - <param name='NAME' doc='Name of ASP to be removed' /> - </params> - </command> - <command id='traffic-mode (broadcast | loadshare | roundrobin | override)'> - <params> - <param name='traffic-mode' doc='Specifies traffic mode of operation of the ASP within the AS' /> - <param name='broadcast' doc='Broadcast to all ASP within AS' /> - <param name='loadshare' doc='Share Load among all ASP within AS' /> - <param name='roundrobin' doc='Round-Robin between all ASP within AS' /> - <param name='override' doc='Override' /> - </params> - </command> - <command id='recovery-timeout <1-2000>'> - <params> - <param name='recovery-timeout' doc='Specifies the recovery timeout value in milliseconds' /> - <param name='<1-2000>' doc='Recovery Timeout in Milliseconds' /> - </params> - </command> - <command id='qos-class <0-255>'> - <params> - <param name='qos-class' doc='Specity QoS Class of AS' /> - <param name='<0-255>' doc='QoS Class of AS' /> - </params> - </command> - <command id='routing-key RCONTEXT DPC'> - <params> - <param name='routing-key' doc='Define a routing key' /> - <param name='RCONTEXT' doc='Routing context number' /> - <param name='DPC' doc='Destination Point Code' /> - </params> - </command> - <command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup)'> - <params> - <param name='routing-key' doc='Define a routing key' /> - <param name='RCONTEXT' doc='Routing context number' /> - <param name='DPC' doc='Destination Point Code' /> - <param name='si' doc='Match on Service Indicator' /> - <param name='aal2' doc='ATM Adaption Layer 2' /> - <param name='bicc' doc='Bearer Independent Call Control' /> - <param name='b-isup' doc='Broadband ISDN User Part' /> - <param name='h248' doc='H.248' /> - <param name='isup' doc='ISDN User Part' /> - <param name='sat-isup' doc='Sattelite ISDN User Part' /> - <param name='sccp' doc='Signalling Connection Control Part' /> - <param name='tup' doc='Telephony User Part' /> - </params> - </command> - <command id='routing-key RCONTEXT DPC ssn SSN'> - <params> - <param name='routing-key' doc='Define a routing key' /> - <param name='RCONTEXT' doc='Routing context number' /> - <param name='DPC' doc='Destination Point Code' /> - <param name='ssn' doc='Match on Sub-System Number' /> - <param name='SSN' doc='Sub-System Number to match on' /> - </params> - </command> - <command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn SSN'> - <params> - <param name='routing-key' doc='Define a routing key' /> - <param name='RCONTEXT' doc='Routing context number' /> - <param name='DPC' doc='Destination Point Code' /> - <param name='si' doc='Match on Service Indicator' /> - <param name='aal2' doc='ATM Adaption Layer 2' /> - <param name='bicc' doc='Bearer Independent Call Control' /> - <param name='b-isup' doc='Broadband ISDN User Part' /> - <param name='h248' doc='H.248' /> - <param name='isup' doc='ISDN User Part' /> - <param name='sat-isup' doc='Sattelite ISDN User Part' /> - <param name='sccp' doc='Signalling Connection Control Part' /> - <param name='tup' doc='Telephony User Part' /> - <param name='ssn' doc='Match on Sub-System Number' /> - <param name='SSN' doc='Sub-System Number to match on' /> - </params> - </command> - <command id='point-code override dpc PC'> - <params> - <param name='point-code' doc='Point Code Specific Features' /> - <param name='override' doc='Override (force) a point-code to hard-coded value' /> - <param name='dpc' doc='Override Source Point Code' /> - <param name='PC' doc='Override Destination Point Code' /> - </params> - </command> - </node> - <node id='config-cs7-asp'> - <name>config-cs7-asp</name> - <command id='description .TEXT'> - <params> - <param name='description' doc='Save human-readable description of the object' /> - <param name='.TEXT' doc='Text until the end of the line' /> - </params> - </command> - <command id='remote-ip A.B.C.D'> - <params> - <param name='remote-ip' doc='Specify Remote IP Address of ASP' /> - <param name='A.B.C.D' doc='Remote IP Address of ASP' /> - </params> - </command> - <command id='local-ip A.B.C.D'> - <params> - <param name='local-ip' doc='Specify Local IP Address from which to contact ASP' /> - <param name='A.B.C.D' doc='Local IP Address from which to contact of ASP' /> - </params> - </command> - <command id='qos-class <0-255>'> - <params> - <param name='qos-class' doc='Specify QoS Class of ASP' /> - <param name='<0-255>' doc='QoS Class of ASP' /> - </params> - </command> - <command id='block'> - <params> - <param name='block' doc='Allows a SCTP Association with ASP, but doesn't let it become active' /> - </params> - </command> - <command id='shutdown'> - <params> - <param name='shutdown' doc='Terminates SCTP association; New associations will be rejected' /> - </params> - </command> - </node> - <node id='config-cs7-listen'> - <name>config-cs7-listen</name> - <command id='local-ip A.B.C.D'> - <params> - <param name='local-ip' doc='Configure the Local IP Address for xUA' /> - <param name='A.B.C.D' doc='IP Address to use for XUA' /> - </params> - </command> - <command id='accept-asp-connections (pre-configured|dynamic-permitted)'> - <params> - <param name='accept-asp-connections' doc='Define what kind of ASP connections to accept' /> - <param name='pre-configured' doc='Accept only pre-confiugred ASPs (source IP/prt)' /> - <param name='dynamic-permitted' doc='Accept any connection and dynamically create an ASP definition' /> - </params> - </command> - </node> - <node id='config-cs7-rt'> - <name>config-cs7-rt</name> - <command id='description .TEXT'> - <params> - <param name='description' doc='Save human-readable description of the object' /> - <param name='.TEXT' doc='Text until the end of the line' /> - </params> - </command> - <command id='update route POINT_CODE MASK linkset LS_NAME [priority PRIO] [qos-class (CLASS|default)]'> - <params> - <param name='update' doc='Update the Route' /> - <param name='route' doc='Update the Route' /> - <param name='POINT_CODE' doc='Destination Point Code' /> - <param name='MASK' doc='Point Code Mask' /> - <param name='linkset' doc='Point Code Length' /> - <param name='LS_NAME' doc='Specify Destination Linkset' /> - <param name='[priority' doc='Linkset Name' /> - <param name='PRIO]' doc='Specify Priority' /> - <param name='[qos-class' doc='Priority' /> - <param name='CLASS' doc='Specify QoS Class' /> - <param name='default' doc='QoS Class' /> - <param name=']' doc='Default QoS Class' /> - </params> - </command> - <command id='remove route POINT_CODE MASK'> - <params> - <param name='remove' doc='Remove a Route' /> - <param name='route' doc='Remove a Route' /> - <param name='POINT_CODE' doc='Destination Point Code' /> - <param name='MASK' doc='Point Code Mask' /> - </params> - </command> - </node> - <node id='config-cs7-sccpaddr'> - <name>config-cs7-sccpaddr</name> - <command id='no point-code'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='point-code' doc='Remove point-code Number' /> - </params> - </command> - <command id='no subsystem-number'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='subsystem-number' doc='Remove Subsystem Number' /> - </params> - </command> - <command id='no global-title'> - <params> - <param name='no' doc='Negate a command or set its defaults' /> - <param name='global-title' doc='Remove Global Title' /> - </params> - </command> - <command id='routing-indicator (GT|PC|IP)'> - <params> - <param name='routing-indicator' doc='Add Routing Indicator' /> - <param name='GT' doc='by global-title' /> - <param name='PC' doc='by point-code' /> - <param name='IP' doc='by ip-address' /> - </params> - </command> - <command id='point-code POINT_CODE'> - <params> - <param name='point-code' doc='Add point-code Number' /> - <param name='POINT_CODE' doc='PC' /> - </params> - </command> - <command id='subsystem-number <0-4294967295>'> - <params> - <param name='subsystem-number' doc='Add Subsystem Number' /> - <param name='<0-4294967295>' doc='SSN' /> - </params> - </command> - <command id='global-title'> - <params> - <param name='global-title' doc='Add/Modify Global Title' /> - </params> - </command> - </node> - <node id='config-cs7-sccpaddr-gt'> - <name>config-cs7-sccpaddr-gt</name> - <command id='global-title-indicator <0-15>'> - <params> - <param name='global-title-indicator' doc='Set Global Title Indicator' /> - <param name='<0-15>' doc='GTI' /> - </params> - </command> - <command id='translation-type <0-255>'> - <params> - <param name='translation-type' doc='Set Global Title Translation Type' /> - <param name='<0-255>' doc='TT' /> - </params> - </command> - <command id='numbering-plan-indicator <0-15>'> - <params> - <param name='numbering-plan-indicator' doc='Set Global Title Numbering Plan Indicator' /> - <param name='<0-15>' doc='NPI' /> - </params> - </command> - <command id='nature-of-address-indicator <0-127>'> - <params> - <param name='nature-of-address-indicator' doc='Set Global Title Nature of Address Indicator' /> - <param name='<0-127>' doc='NAI' /> - </params> - </command> - <command id='digits DIGITS'> - <params> - <param name='digits' doc='Set Global Title Digits' /> - <param name='DIGITS' doc='Number digits' /> - </params> - </command> - </node> -</vtydoc> diff --git a/configure.ac b/configure.ac index e036384..e7c47a1 100644 --- a/configure.ac +++ b/configure.ac @@ -32,6 +32,5 @@ OsmoMGCP/Makefile OsmoNAT/Makefile OsmoNITB/Makefile - OsmoSTP/Makefile OsmoTRX/Makefile OsmocomBB/Makefile) -- To view, visit https://gerrit.osmocom.org/11969 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-gsm-manuals Gerrit-Branch: master Gerrit-MessageType: merged Gerrit-Change-Id: I971ef93a675412ea27d8bf193db6b9b35428f0bc Gerrit-Change-Number: 11969 Gerrit-PatchSet: 2 Gerrit-Owner: osmith <osmith at sysmocom.de> Gerrit-Reviewer: Jenkins Builder (1000002) Gerrit-Reviewer: Pau Espin Pedrol <pespin at sysmocom.de> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181128/e9061c76/attachment.htm>