This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Neels Hofmeyr gerrit-no-reply at lists.osmocom.orgNeels Hofmeyr has submitted this change and it was merged. ( https://gerrit.osmocom.org/11970 )
Change subject: remove OsmoTRX files (now avail in osmo-trx.git)
......................................................................
remove OsmoTRX files (now avail in osmo-trx.git)
Files were added in osmo-trx.git Change-Id
I2762171af0bf719a34ba12a0c2e4dcc206098beb
Depends: osmo-trx.git Change-Id I2762171af0bf719a34ba12a0c2e4dcc206098beb
Related: OS#3385
Change-Id: If7cd43eec5f9d20f7f4200340e96ed0e0908e253
---
M Makefile.am
D OsmoTRX/Makefile.am
D OsmoTRX/chapters/code-architecture.adoc
D OsmoTRX/chapters/configuration.adoc
D OsmoTRX/chapters/control.adoc
D OsmoTRX/chapters/counters.adoc
D OsmoTRX/chapters/counters_generated.adoc
D OsmoTRX/chapters/overview.adoc
D OsmoTRX/chapters/running.adoc
D OsmoTRX/chapters/trx-architectures.adoc
D OsmoTRX/chapters/trx-backends.adoc
D OsmoTRX/chapters/trx-devices.adoc
D OsmoTRX/osmotrx-usermanual-docinfo.xml
D OsmoTRX/osmotrx-usermanual.adoc
D OsmoTRX/osmotrx-vty-reference.xml
D OsmoTRX/vty/trx_vty_additions.xml
D OsmoTRX/vty/trx_vty_reference.xml
M configure.ac
18 files changed, 0 insertions(+), 1,827 deletions(-)
Approvals:
Jenkins Builder: Verified
Pau Espin Pedrol: Looks good to me, but someone else must approve
diff --git a/Makefile.am b/Makefile.am
index eb86032..fdafc0d 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -10,7 +10,6 @@
OsmoMGCP \
OsmoNAT \
OsmoNITB \
- OsmoTRX \
OsmocomBB
$(top_srcdir)/.version:
diff --git a/OsmoTRX/Makefile.am b/OsmoTRX/Makefile.am
deleted file mode 100644
index ce5f241..0000000
--- a/OsmoTRX/Makefile.am
+++ /dev/null
@@ -1,15 +0,0 @@
-OSMO_GSM_MANUALS_DIR = $(top_srcdir)
-EXTRA_DIST = osmotrx-usermanual.adoc \
- osmotrx-usermanual-docinfo.xml \
- osmotrx-vty-reference.xml \
- chapters \
- vty
-
-ASCIIDOC = osmotrx-usermanual.adoc
-ASCIIDOC_DEPS = $(srcdir)/chapters/*.adoc
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.asciidoc.inc
-
-VTY_REFERENCE = osmotrx-vty-reference.xml
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc
-
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc
diff --git a/OsmoTRX/chapters/code-architecture.adoc b/OsmoTRX/chapters/code-architecture.adoc
deleted file mode 100644
index 18d0e3a..0000000
--- a/OsmoTRX/chapters/code-architecture.adoc
+++ /dev/null
@@ -1,141 +0,0 @@
-[[code_architecture]]
-== Code Architecture
-
-[[fig-code-architecture-general]]
-.General overview of main OsmoTRX components
-[graphviz]
-----
-digraph hierarchy {
-node[shape=record,style=filled,fillcolor=gray95]
-edge[dir=back, arrowtail=empty]
-
-2[label = "{Transceiver|+ constructor()\l+ destructor()\l+ init()\l+ numChans()\l+ receiveFIFO()\l+ setSignalHandler()}"]
-3[label = "{RadioInterface|...}"]
-4[label = "{RadioInterfaceResamp|...}"]
-5[label = "{RadioInterfaceMulti|...}"]
-6[label = "{RadioDevice|...}"]
-7[label = "{UHDDevice|...}"]
-8[label = "{LMSDevice|...}"]
-9[label = "{USRPDevice|...}"]
-
-2->3[arrowtail=odiamond]
-3->4[constraint=false]
-3->5[constraint=false]
-3->6[arrowtail=odiamond]
-6->7
-6->8
-6->9
-}
-----
-
-[[fig-code-architecture-threads]]
-.Example of thread architecture with OsmoTRX configured to use 2 logical RF channels (Trx=Transceiver, RI=RadioIface)
-[graphviz]
-----
-digraph hierarchy {
-node[shape=record,style=filled,fillcolor=gray95]
-
-trans [label="Transceiver"];
-radioiface [label="RadioInterface"];
-radiodev [label="RadioDevice"];
-
-trans:nw->trans:ne [label="Trx.ControlServiceLoop_0"];
-trans:nw->trans:ne [label="Trx.ControlServiceLoop_1"];
-trans:w->radioiface:w [label="Trx.TxPriorityQueueServiceLoop_0"];
-trans:w->radioiface:w [label="Trx.TxPriorityQueueServiceLoop_1"];
-radioiface:e->trans:e [label="Trx.RxServiceLoop_0"];
-radioiface:e->trans:e [label="Trx.RxServiceLoop_1"];
-radioiface->radiodev[label="RI.AlignRadioServiceLoop"];
-radioiface:sw->radiodev:nw [label="Trx.TxLowerLoop"];
-radiodev:ne->radioiface:se [label="Trx.RxLowerLoop"];
-}
-----
-
-[[code_component_transceiver]]
-=== Transceiver
-
-The Transceiver is the main component managing the other components running in
-the OsmoTRX process. There's a unique instance per process.
-
-This class is quite complex from code point of view, as it starts lots of
-different threads and hence the interaction with this class from the outside is
-quite limited. Only interaction possible is to:
-
-* `Transceiver()`: Create an instance through its constructor, at this time most
- configuration is handed to it.
-* `init()`: Start running all the threads.
-* `receiveFIFO()`: Attach a `radioInterface` channel FIFO in order to use it.
-* `setSignalHandler()`: Used to set up a callback to receive certain events
- asynchronously from the Transceiver. No assumptions can be made about from
- which thread is the callback being called, which means multi-thread locking
- precautions may be required in certain cases, similar to usual signal handler
- processing. One important event received through this path is for instance
- when the Transceiver detected a fatal error which requires it to stop. Since
- it cannot stop itself (see destructor below), stopping procedure must be
- delegated to the user who created the instance.
-* `~Transceiver()`: The destructor, which stops all running threads created at
- `init()` time. Destroying the object is the only way to stop the `Transceiver`
- completely, and must be called from a thread not managed by the
- `Transceiver`, otherwise it will deadlock. Usually it is stopped from the main
- thread, the one that called the constructor during startup.
-
-During `init()` time, `Transceiver` will create a noticeable amount of threads,
-which may vary depending on the amount of RF channels requested.
-
-Static amount of Threads (1 per `Transceiver` instance):
-
-* `RxLowerLoop`: This thread is responsible for reading bursts from the
- `RadioInterface`, storing them into its FIFO and sending Clock Indications
- (<<trx_if_clock_ind>>) to _osmo-bts_trx_.
-* `TxLowerLoop`: Manages pushing bursts from buffers in the FIFO into the
- `RadioInterface` at expected correct time based on the Transceiver clock.
-
-Dynamic amount of Threads (1 per RF logical channel on the `Transceiver` instance):
-
-* `ControlServiceLoop`: Handles commands from the Per-ARFCN Control Interface
- socket (<<trx_if_control>>). Each thread is responsible for managing one
- socket related to one ARFCN or which is the same, to one RF logical channel.
- These are the only threads expected to use the private `start()` and `stop()`
- methods of the `Transceiver()` class, since those methods don't stop any of
- the `ControlServiceLoop` threads as they must keep running to handle new
- commands (for instance, to re-start processing samples with the _POWERON_
- command).
-* `RxServiceLoop`: Each thread of this type pulls bursts from the
- `RadioInterface` FIFO for one specific logical RF channel and handles it
- according to the slot and burst correlation type, finally sending proper data
- over the TRX Manager UDP socket (<<trx_if>>).
-* `TxPriorityQueueServiceLoop`: Blocks reading from one ARFCN specific TRX
- Manager UDP socket (<<trx_if>>), and fills the `RadioInterface` with it
- setting clock related information.
-
-[[code_component_radioiface]]
-=== RadioInterface
-
-The `RadioInterface` sits between the `Transceiver` and the `RadioDevice`, and
-provides extra features to the pipe like channelizers, resamplers, Tx/Rx
-synchronization on some devices, etc.
-
-If the `RadioDevice` it drives requires it (only _USRP1_ so far), the
-`RadioIntercace` will start and manage a thread internally called
-`AlignRadioServiceLoop` which will align current RX and TX timestamps.
-
-Different features are offered through different `RadioInterface` subclasses
-which are selected based on configuration and device detected at runtime. Using
-these features may impact on the amount of CPU required to run the entire pipe.
-
-==== RadioInterfaceResamp
-
-This subclass of `RadioInterface` is automatically selected when some known
-specific UHD are to be used, since they require resampling to work properly.
-Some of this devices are for instance Ettus B100, USRP2 and X3XX models.
-
-==== RadioInterfaceMulti
-
-This subclass of `RadioInterface` is used when <<multiarfcn_mode>> is requested.
-
-[[code_component_radiodev]]
-=== RadioDevice
-
-The `RadioDevice` class is responsible for driving the actual Hardware device.
-It is actually only an interface, and it is implemented in each backend which in
-turn becomes a specific OsmoTRX binary, see <<trx_backends>>.
diff --git a/OsmoTRX/chapters/configuration.adoc b/OsmoTRX/chapters/configuration.adoc
deleted file mode 100644
index 87d7903..0000000
--- a/OsmoTRX/chapters/configuration.adoc
+++ /dev/null
@@ -1,85 +0,0 @@
-== Configuring OsmTRX
-
-OsmoTRX will read the configuration at startup time and configure the
-transceiver accordingly after validating the configuration.
-
-OsmoTRX can handle several TRX channels, but at least one must be configured in
-order to be able to start it successfully. Channels must be present in the
-configuration file in incremental order, starting from 0 and be consecutive.
-
-Example configuration files for different devices and setups can be found in
-`doc/examples/` in 'osmo-trx' git repository.
-
-=== Documented example
-
-.Example: Static GGSN/APN configuration (single catch-all GGSN)
-----
-trx
- bind-ip 127.0.0.1 <1>
- remote-ip 127.0.0.1 <2>
- base-port 5700 <3>
- egprs disable <4>
- tx-sps 4 <5>
- rx-sps 4 <6>
- chan 0 <7>
- tx-path BAND1 <8>
- rx-path LNAW <9>
-----
-<1> Configure the local IP address at the TRX used for the connection against `osmo-bts-trx`.
-<2> Specify the IP address of `osmo-bts-trx` to connect to.
-<3> Specify the reference base UDP port to use for communication.
-<4> Don't enable EDGE support.
-<5> Use 4 TX samples per symbol. This is device specific.
-<6> Use 4 RX samples per symbol. This is device specific.
-<7> Configure the first channel. As no other channels are specified, `osmo-trx` assumes it is using only one channel.
-<8> Configure the device to use `BAND1` Tx antenna path from all the available ones (device specific).
-<9> Configure the device to use `LNAW` Rx antenna path from all the available ones (device specific).
-
-[[multiarfcn_mode]]
-=== Multi-ARFCN mode
-
-The Multi-ARFCN feature allows to have a multi-carrier approach multiplexed on a
-single physical RF channel, which can introduce several benefits, such as lower
-cost and higher capacity support.
-
-Multi-ARFCN support is available since osmo-trx release `0.2.0`, and it was
-added specifically in commit `76764278169d252980853251daeb9f1ba0c246e1`.
-
-This feature is useful for instance if you want to run more than 1 TRX with an
-Ettus B200 device, or 3 TRX with an Ettus B210 device, since they support only 1
-and 2 physical RF channels respectively. No device from other providers or even
-other devices than B200 and B210 from Ettus are known to support this feature.
-
-With multi-ARFCN enabled, ARFCN spacing is fixed at 800 kHz or 4 GSM channels.
-So if TRX-0 is set to ARFCN 51, TRX-1 _must_ be set to 55, and so on. Up to
-three ARFCN's is supported for multi-TRX.
-
-From BTS and BSC point of view, supporting multiple TRX through multi-ARFCN
-feature in OsmoTRX doesn't make any difference from a regular multi-TRX setup,
-leaving apart of course the mentioned ARFCN limitations explained above and as a
-consequence physical installation and operational differences.
-
-.Example: osmo-bts-trx.cfg using 2 TRX against an osmo-trx driven device
-----
-phy 0
- osmotrx ip local 127.0.0.1
- osmotrx ip remote 127.0.0.1
- instance 0
- instance 1
-bts 0
- ...
- band GSM-1800
- trx 0
- phy 0 instance 0
- trx 1
- phy 0 instance 1
-----
-
-.Example: osmo-trx.cfg using Multi-ARFCN mode to run 2 TRX
-----
-trx
- ...
- multi-arfcn enable
- chan 0
- chan 1
-----
diff --git a/OsmoTRX/chapters/control.adoc b/OsmoTRX/chapters/control.adoc
deleted file mode 100644
index 168769a..0000000
--- a/OsmoTRX/chapters/control.adoc
+++ /dev/null
@@ -1,12 +0,0 @@
-[[control]]
-== Control interface
-
-The actual protocol is described in <<common-control-if>>, the variables
-common to all programs using it are described in <<ctrl_common_vars>>. Here we
-describe variables specific to OsmoTRX.
-
-.Variables available over control interface
-[options="header",width="100%",cols="20%,5%,5%,50%,20%"]
-|===
-|Name|Access|Trap|Value|Comment
-|===
diff --git a/OsmoTRX/chapters/counters.adoc b/OsmoTRX/chapters/counters.adoc
deleted file mode 100644
index 7fbb10c..0000000
--- a/OsmoTRX/chapters/counters.adoc
+++ /dev/null
@@ -1,4 +0,0 @@
-[[counters]]
-== Counters
-
-include::./counters_generated.adoc[]
diff --git a/OsmoTRX/chapters/counters_generated.adoc b/OsmoTRX/chapters/counters_generated.adoc
deleted file mode 100644
index b40dc37..0000000
--- a/OsmoTRX/chapters/counters_generated.adoc
+++ /dev/null
@@ -1,7 +0,0 @@
-// autogenerated by show asciidoc counters
-These counters and their description based on OsmoTRX 0.2.0.61-408f (OsmoTRX).
-
-// generating tables for rate_ctr_group
-// generating tables for osmo_stat_items
-// generating tables for osmo_counters
-// there are no ungrouped osmo_counters
diff --git a/OsmoTRX/chapters/overview.adoc b/OsmoTRX/chapters/overview.adoc
deleted file mode 100644
index 785e26b..0000000
--- a/OsmoTRX/chapters/overview.adoc
+++ /dev/null
@@ -1,62 +0,0 @@
-[[chapter_introduction]]
-== Overview
-
-[[intro_overview]]
-=== About OsmoTRX
-
-OsmoTRX is a C/C++ language implementation of the GSM radio modem,
-originally developed as the 'Transceiver' part of OpenBTS. This radio
-modem offers an interface based on top of UDP streams.
-
-
-The OsmoBTS bts_model code for OsmoTRX is called
-`osmo-bts-trx`. It implements the UDP stream interface of
-OsmoTRX, so both parts can be used together to implement a complete GSM
-BTS based on general-purpose computing SDR.
-
-As OsmoTRX is general-purpose software running on top of Linux, it is
-thus not tied to any specific physical hardware. At the time of this
-writing, OsmoTRX supports a variety of Lime Microsystems and Ettus USRP SDRs via
-the UHD driver, as well as the Fairwaves UmTRX and derived products.
-
-OsmoTRX is not a complete GSM PHY but 'just' the radio modem. This
-means that all of the Layer 1 functionality such as scheduling,
-convolutional coding, etc. is actually also implemented inside OsmoBTS.
-OsmoTRX is a software-defined radio transceiver that implements the Layer 1
-physical layer of a BTS comprising the following 3GPP specifications:
-
-* TS 05.01 "Physical layer on the radio path"
-* TS 05.02 "Multiplexing and Multiple Access on the Radio Path"
-* TS 05.04 "Modulation"
-* TS 05.10 "Radio subsystem synchronization
-
-As such, the boundary between OsmoTRX and `osmo-bts-trx` is at
-a much lower interface, which is an internal interface of other more
-traditional GSM PHY implementations.
-
-Besides OsmoTRX, there are also other implementations (both Free
-Software and proprietary) that implement the same UDP stream based radio
-modem interface.
-
-[[fig-gprs-pcubts]]
-.GSM network architecture with OsmoTRX and OsmoBTS
-[graphviz]
-----
-digraph G {
- rankdir=LR;
- MS0 [label="MS"];
- MS1 [label="MS"];
- MS0->SDR[label="Um"];
- MS1->SDR [label="Um"];
- SDR -> OsmoTRX [label="Raw Samples"];
- OsmoTRX->BTS [label="bursts over UDP"];
- BTS->BSC [label="Abis"];
- BSC->MSC [label="A"];
- BTS->PCU [label="pcu_sock"];
- PCU->SGSN [label="Gb"];
- OsmoTRX [color=red];
-}
-----
-
-For more information see
-https://osmocom.org/projects/osmotrx/wiki/OsmoTRX
diff --git a/OsmoTRX/chapters/running.adoc b/OsmoTRX/chapters/running.adoc
deleted file mode 100644
index 7ed2884..0000000
--- a/OsmoTRX/chapters/running.adoc
+++ /dev/null
@@ -1,19 +0,0 @@
-== Running OsmoTRX
-
-The OsmoTRX executable (`osmo-trx`) offers the following command-line
-options:
-
-
-=== SYNOPSIS
-
-*osmo-trx* [-h] [-C 'CONFIGFILE']
-
-
-=== OPTIONS
-
-*-h*::
- Print a short help message about the supported options
-*-C 'CONFIGFILE'*::
- Specify the file and path name of the configuration file to be
- used. If none is specified, use `osmo_trx.cfg` in the current
- working directory.
diff --git a/OsmoTRX/chapters/trx-architectures.adoc b/OsmoTRX/chapters/trx-architectures.adoc
deleted file mode 100644
index 66eae5e..0000000
--- a/OsmoTRX/chapters/trx-architectures.adoc
+++ /dev/null
@@ -1,34 +0,0 @@
-[[osmotrx_arch_support]]
-== OsmoTRX hardware architecture support
-
-OsmoTRX comes out-of-the-box with several algorithms and operations
-optimized for certain instruction-set architectures, as well as non-optimized
-fall-back algorithms in case required instruction sets are not supported by the
-compiler at compile time or by the executing machine at run-time. Support for
-these optimized algorithms can be enabled and disabled by means of configure
-flags. Accelerated operations include pulse shape filtering, resampling,
-sequence correlation, and many other signal processing operations.
-
-On Intel processors, OsmoTRX makes heavy use of the Streaming SIMD Extensions
-(SSE) instruction set. SSE3 is the minimum requirement for accelerated use.
-SSE3 is present in the majority of Intel processors since later versions of the
-Pentium 4 architecture and is also present on low power Atom processors. Support
-is automatically detected at build time. SSE4.1 instruction set is supported
-too. This feature is enabled by default unless explicitly disabled by passing
-the configure flag _--with-sse=no_. When enabled, the compiler will build an
-extra version of each of the supported algorithms using each of the supported
-mentioned instruction sets. Then, at run-time, OsmoTRX will auto-detect
-capabilities of the executing machine and enable an optimized algorithm using
-the most suitable available (previously compiled) instruction set.
-
-On ARM processors, NEON and NEON FMA are supported. Different to the x86, there
-is no auto-detection in this case, nor difference between compile and runtime.
-NEON support is disabled by default and can be enabled by passing the flag
-_--with-neon=yes_ to the configure script; the used compiler must support NEON
-instruction set and the resulting binary will only run fine on an ARM board
-supporting NEON extensions. Running OsmoTRX built with flag _--with-neon_ on a
-board without NEON instruction set support, will most probably end up in the
-process being killed with a _SIGILL_ Illegal Instruction signal by the operating
-system. NEON FMA (Fused Multiply-Add) is an extension to the NEON instruction
-set, and its use in OsmoTRX can be enabled by passing the _--with_neon_vfpv4_
-flag, which will also implicitly enable NEON support (_--with_neon_).
diff --git a/OsmoTRX/chapters/trx-backends.adoc b/OsmoTRX/chapters/trx-backends.adoc
deleted file mode 100644
index 8829fa6..0000000
--- a/OsmoTRX/chapters/trx-backends.adoc
+++ /dev/null
@@ -1,46 +0,0 @@
-[[trx_backends]]
-== OsmoTRX backend support
-
-[[backend_uhd]]
-=== `osmo-trx-uhd` for UHD based Transceivers
-
-This OsmoTRX model uses _libuhd_ (UHD, USRP Hardware Driver) to drive the
-device, that is configuring it and reading/writing samples from/to it.
-
-So far, this backend has been mostly used to drive devices such as the Ettus
-B200 family and Fairwaves UmTRX family, and used to be the default backend used
-for legacy @osmo-trx@ binary when per-backend binaries didn't exist yet.
-
-Any device providing generic support for UHD should theoretically be able to be
-run through this backend without much effort, but pracitcal experience showed
-that some devices don't play well with it, such as the LimeSDR family of
-devices, which showed far better results when using its native interface.
-
-Related code can be found in the _Transceiver52M/device/uhd/_ directory in
-_osmo-trx.git_.
-
-[[backend_lms]]
-=== `osmo-trx-lms` for LimeSuite based Transceivers
-
-This OsmoTRX model uses LimeSuite API and library to drive the device, that is
-configuring it and reading/writing samples from/to it.
-
-This backend was developed in order to be used together with LimeSDR-USB and
-LimeSDR-mini devices, due to to the poor results obtained with the UHD backend,
-and to simplify the stack.
-
-Related code can be found in the _Transceiver52M/device/lms/_ directory in
-_osmo-trx.git_.
-
-[[backend_usrp1]]
-=== `osmo-trx-usrp1` for libusrp based Transceivers
-
-This OsmoTRX model uses the legacy libusrp driver provided in GNU Radio 3.4.2.
-
-As this code was dropped from GNU Radio at some point and was found very
-difficult to build, some work was done to create a standalone libusrp which can
-be nowadays found as a separate git repository together with other osmocom git
-repositories, in https://git.osmocom.org/libusrp/
-
-Related code can be found in the _Transceiver52M/device/usrp1/_ directory in
-_osmo-trx.git_.
diff --git a/OsmoTRX/chapters/trx-devices.adoc b/OsmoTRX/chapters/trx-devices.adoc
deleted file mode 100644
index 10c8529..0000000
--- a/OsmoTRX/chapters/trx-devices.adoc
+++ /dev/null
@@ -1,90 +0,0 @@
-[[osmotrx_device_support]]
-== OsmoTRX hardware device support
-
-OsmoTRX consists of a _common_ part that applies to all TRX devices as well as
-_hardware-specific_ parts for each TRX device. The hardware-specific parts are
-usually provided by vendor-specific or device-specific libraries that are then
-handled by some OsmoTRX glue code presenting a unified interface towards the
-rest of the code by means of a _RadioDevice_ class.
-
-The common part includes the core TRX architecture as well as code for
-implementing the external interfaces such as the TRX Manager UDP socket,
-control, and VTY interfaces.
-
-The hardware-specific parts include support for driving one particular
-implementation of a radio modem. Such a physical layer
-implementation can come in many forms. Sometimes it runs on a general
-purpose CPU, sometimes on a dedicated ARM core, a dedicated DSP, a
-combination of DSP and FPGA.
-
-Joining the common part with each of the available backends results in a
-different binary with different suffix for each backend. For instance, when
-OsmoTRX is built with UHD backend, an _osmo-trx-uhd_ binary is generated; when
-OsmoTRX is built with LimeSuite backend, an _osmo-trx-lms_ binary is generated.
-Build of different backend can be enabled and disabled by means of configure
-flags, which can be found in each subsection relative to each backend below.
-
-[[dev_ettus_usrp1]]
-=== Ettus USRP1
-
-The binary _osmo-trx-usrp1_ is used to drive this device, see <<backend_usrp1>>.
-
-[[dev_ettus_b200]]
-=== Ettus B200
-
-The binary _osmo-trx-uhd_ is used to drive this device, see <<backend_uhd>>.
-
-Comes only with 1 RF channel. It can still be used in a multi-TRX setup by using
-the <<multiarfcn_mode>> feature. By using this feature, one can drive up to 3
-TRX (with the restrictions explained there).
-
-[[dev_ettus_b200]]
-=== Ettus B210
-
-The binary _osmo-trx-uhd_ is used to drive this device, see <<backend_uhd>>.
-
-Comes with 2 RF channels, which can be used to set up a multi-TRX BTS. However,
-due to a shared local oscillator for both RF channels, ARFCN separation can be
-up about 25 MHz.
-
-This device also supports the <<multiarfcn_mode>> feature. By using this
-feature, one can drive up to 3 TRX (with the restrictions explained there).
-Please note that the above configurations cannot be combined, which means
-maximum number of TRX one can achieve is 2 by using separate physical RF
-channels, or 3 by using multi-ARFCN method. You cannot support, for example, 6
-ARFCN operation on B210 using 3 TRX on side A and another 3 TRX on side B.
-
-[[dev_limesdr_usb]]
-=== LimeSDR-USB
-
-The binary _osmo-trx-lms_ is used to drive this device, see <<backend_lms>>.
-
-This device comes with 2 RF channels, so it should theoretically be possible to
-run a multi-TRX setup with it, but there are yet no records that this kind of
-setup was tested with this device.
-
-This device has 3 different Rx paths with different antenna connectors in the
-PCB, each with a different frequency and bandwidth range. One should make sure
-the physical antenna is connected to the correct connector matching the Rx path
-you want to use. If one wants to be able to use the device in both 900 and 1800
-MHz GSM bands and easily switch between them, then Rx Path `LNAW` should be used
-,since it is the only one covering both bands, and the antenna physically plugged
-accordingly. Following example shows how to then configure _osmo-trx-lms_ to use
-that Rx path to read samples.
-
-.Example: Configure osmo-trx-lms to use LNAW as Rx path and BAND1 as Tx Path
-----
-trx
- ...
- chan 0
- tx-path BAND1
- rx-path LNAW
-----
-
-[[dev_limesdr_mini]]
-=== LimeSDR-mini
-
-The binary _osmo-trx-lms_ is used to drive this device, see <<backend_lms>>.
-
-As a smaller brother of the [[dev_limesdr_usb]], this device comes only with 1
-RF channel. As a result, it can only hold 1 TRX as of today.
diff --git a/OsmoTRX/osmotrx-usermanual-docinfo.xml b/OsmoTRX/osmotrx-usermanual-docinfo.xml
deleted file mode 100644
index 34225be..0000000
--- a/OsmoTRX/osmotrx-usermanual-docinfo.xml
+++ /dev/null
@@ -1,46 +0,0 @@
-<revhistory>
- <revision>
- <revnumber>1</revnumber>
- <date>March 6, 2019</date>
- <authorinitials>PE</authorinitials>
- <revremark>
- Initial version.
- </revremark>
- </revision>
-</revhistory>
-
-<authorgroup>
- <author>
- <firstname>Pau</firstname>
- <surname>Espin Pedrol</surname>
- <email>pespin at sysmocom.de</email>
- <authorinitials>PE</authorinitials>
- <affiliation>
- <shortaffil>sysmocom</shortaffil>
- <orgname>sysmocom - s.f.m.c. GmbH</orgname>
- <jobtitle>Software Developer</jobtitle>
- </affiliation>
- </author>
-</authorgroup>
-
-<copyright>
- <year>2018</year>
- <holder>sysmocom - s.f.m.c. GmbH</holder>
-</copyright>
-
-<legalnotice>
- <para>
- Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.3 or any later version published by the Free Software
- Foundation; with no Invariant Sections, no Front-Cover Texts,
- and no Back-Cover Texts. A copy of the license is included in
- the section entitled "GNU Free Documentation License".
- </para>
- <para>
- The Asciidoc source code of this manual can be found at
- <ulink url="http://git.osmocom.org/osmo-gsm-manuals/">
- http://git.osmocom.org/osmo-gsm-manuals/
- </ulink>
- </para>
-</legalnotice>
diff --git a/OsmoTRX/osmotrx-usermanual.adoc b/OsmoTRX/osmotrx-usermanual.adoc
deleted file mode 100644
index a17a899..0000000
--- a/OsmoTRX/osmotrx-usermanual.adoc
+++ /dev/null
@@ -1,42 +0,0 @@
-:gfdl-enabled:
-
-OsmoTRX User Manual
-====================
-Pau Espin Pedrol <pespin at sysmocom.de>
-
-
-include::./common/chapters/preface.adoc[]
-
-include::{srcdir}/chapters/overview.adoc[]
-
-include::{srcdir}/chapters/running.adoc[]
-
-include::./common/chapters/control_if.adoc[]
-
-include::{srcdir}/chapters/control.adoc[]
-
-include::./common/chapters/vty.adoc[]
-
-include::./common/chapters/logging.adoc[]
-
-include::{srcdir}/chapters/counters.adoc[]
-
-include::{srcdir}/chapters/configuration.adoc[]
-
-include::{srcdir}/chapters/trx-architectures.adoc[]
-
-include::{srcdir}/chapters/trx-devices.adoc[]
-
-include::{srcdir}/chapters/trx-backends.adoc[]
-
-include::{srcdir}/chapters/code-architecture.adoc[]
-
-include::./common/chapters/trx_if.adoc[]
-
-include::./common/chapters/port_numbers.adoc[]
-
-include::./common/chapters/bibliography.adoc[]
-
-include::./common/chapters/glossary.adoc[]
-
-include::./common/chapters/gfdl.adoc[]
diff --git a/OsmoTRX/osmotrx-vty-reference.xml b/OsmoTRX/osmotrx-vty-reference.xml
deleted file mode 100644
index 4291929..0000000
--- a/OsmoTRX/osmotrx-vty-reference.xml
+++ /dev/null
@@ -1,37 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ex:ts=2:sw=42sts=2:et
- -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
--->
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN"
-"http://docbook.org/xml/5.0/dtd/docbook.dtd" [
-<!ENTITY chapter-vty SYSTEM "./common/chapters/vty.xml" >
-<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" >
-]>
-
-<book>
- <info>
- <revhistory>
- <revision>
- <revnumber>v1</revnumber>
- <date>6th March 2018</date>
- <authorinitials>pe</authorinitials>
- <revremark>Initial</revremark>
- </revision>
- </revhistory>
-
- <title>OsmoTRX VTY Reference</title>
-
- <copyright>
- <year>2018</year>
- </copyright>
-
- <legalnotice>
- <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved.
- </para>
- </legalnotice>
- </info>
-
- <!-- Main chapters-->
- &chapter-vty;
-</book>
diff --git a/OsmoTRX/vty/trx_vty_additions.xml b/OsmoTRX/vty/trx_vty_additions.xml
deleted file mode 100644
index a4c675e..0000000
--- a/OsmoTRX/vty/trx_vty_additions.xml
+++ /dev/null
@@ -1,2 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-</vtydoc>
diff --git a/OsmoTRX/vty/trx_vty_reference.xml b/OsmoTRX/vty/trx_vty_reference.xml
deleted file mode 100644
index ffc642a..0000000
--- a/OsmoTRX/vty/trx_vty_reference.xml
+++ /dev/null
@@ -1,1183 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
- <node id='_common_cmds_'>
- <name>Common Commands</name>
- <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
- <command id='help'>
- <params>
- <param name='help' doc='Description of the interactive help system' />
- </params>
- </command>
- <command id='list'>
- <params>
- <param name='list' doc='Print command list' />
- </params>
- </command>
- <command id='write terminal'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='terminal' doc='Write to terminal' />
- </params>
- </command>
- <command id='write file'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='file' doc='Write to configuration file' />
- </params>
- </command>
- <command id='write memory'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='memory' doc='Write configuration to the file (same as write file)' />
- </params>
- </command>
- <command id='write'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- </params>
- </command>
- <command id='show running-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='running-config' doc='running configuration' />
- </params>
- </command>
- <command id='exit'>
- <params>
- <param name='exit' doc='Exit current mode and down to previous mode' />
- </params>
- </command>
- <command id='end'>
- <params>
- <param name='end' doc='End current mode and change to enable mode.' />
- </params>
- </command>
- </node>
- <node id='view'>
- <name>view</name>
- <command id='show version'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='version' doc='Displays program version' />
- </params>
- </command>
- <command id='show online-help'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='online-help' doc='Online help' />
- </params>
- </command>
- <command id='enable'>
- <params>
- <param name='enable' doc='Turn on privileged mode command' />
- </params>
- </command>
- <command id='terminal length <0-512>'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='length' doc='Set number of lines on a screen' />
- <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
- </params>
- </command>
- <command id='terminal no length'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='length' doc='Set number of lines on a screen' />
- </params>
- </command>
- <command id='echo .MESSAGE'>
- <params>
- <param name='echo' doc='Echo a message back to the vty' />
- <param name='.MESSAGE' doc='The message to echo' />
- </params>
- </command>
- <command id='who'>
- <params>
- <param name='who' doc='Display who is on vty' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='show trx'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='trx' doc='Display information on the TRX' />
- </params>
- </command>
- <command id='logging enable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='enable' doc='Enables logging to this vty' />
- </params>
- </command>
- <command id='logging disable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='disable' doc='Disables logging to this vty' />
- </params>
- </command>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don't use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging print extended-timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='extended-timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
- </params>
- </command>
- <command id='logging print category (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem name' />
- </params>
- </command>
- <command id='logging print category-hex (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category-hex' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
- </params>
- </command>
- <command id='logging print level (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='level' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the log level name' />
- </params>
- </command>
- <command id='logging print file (0|1|basename)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='file' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the source file and line' />
- <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
- </params>
- </command>
- <command id='logging set-log-mask MASK'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='set-log-mask' doc='Set the logmask of this logging target' />
- <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
- </params>
- </command>
- <command id='logging set log mask MASK'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='set' doc='Decide which categories to output.' />
- <param name='log' doc='Log commands' />
- <param name='mask' doc='Mask commands' />
- <param name='MASK' doc=''set log mask' is deprecated, please refer to the docs of 'set-log-mask' instead' />
- </params>
- </command>
- <command id='logging level (all|main|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
- <param name='main' doc='Main generic category' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='lctrl' doc='Control Interface' />
- <param name='lgtp' doc='GPRS GTP library' />
- <param name='lstats' doc='Statistics messages and logging' />
- <param name='lgsup' doc='Generic Subscriber Update Protocol' />
- <param name='loap' doc='Osmocom Authentication Protocol' />
- <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
- <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
- <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
- <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
- <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
- <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='everything' doc='Don't use. It doesn't log anything' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='show logging vty'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='logging' doc='Show current logging configuration' />
- <param name='vty' doc='Show current logging configuration for this vty' />
- </params>
- </command>
- <command id='show alarms'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='alarms' doc='Show current logging configuration' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='tree' doc='Display only a specific memory chunk' />
- <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='filter' doc='Filter chunks using regular expression' />
- <param name='REGEXP' doc='Regular expression' />
- </params>
- </command>
- <command id='show stats'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- </params>
- </command>
- <command id='show stats level (global|peer|subscriber)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- <param name='level' doc='Set the maximum group level' />
- <param name='global' doc='Show global groups only' />
- <param name='peer' doc='Show global and network peer related groups' />
- <param name='subscriber' doc='Show global, peer, and subscriber groups' />
- </params>
- </command>
- <command id='show asciidoc counters'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='asciidoc' doc='Asciidoc generation' />
- <param name='counters' doc='Generate table of all registered counters' />
- </params>
- </command>
- </node>
- <node id='enable'>
- <name>enable</name>
- <command id='disable'>
- <params>
- <param name='disable' doc='Turn off privileged mode command' />
- </params>
- </command>
- <command id='configure terminal'>
- <params>
- <param name='configure' doc='Configuration from vty interface' />
- <param name='terminal' doc='Configuration terminal' />
- </params>
- </command>
- <command id='copy running-config startup-config'>
- <params>
- <param name='copy' doc='Copy configuration' />
- <param name='running-config' doc='Copy running config to... ' />
- <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
- </params>
- </command>
- <command id='show startup-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='startup-config' doc='Contentes of startup configuration' />
- </params>
- </command>
- <command id='show version'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='version' doc='Displays program version' />
- </params>
- </command>
- <command id='show online-help'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='online-help' doc='Online help' />
- </params>
- </command>
- <command id='terminal length <0-512>'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='length' doc='Set number of lines on a screen' />
- <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
- </params>
- </command>
- <command id='terminal no length'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='length' doc='Set number of lines on a screen' />
- </params>
- </command>
- <command id='echo .MESSAGE'>
- <params>
- <param name='echo' doc='Echo a message back to the vty' />
- <param name='.MESSAGE' doc='The message to echo' />
- </params>
- </command>
- <command id='who'>
- <params>
- <param name='who' doc='Display who is on vty' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='terminal monitor'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='monitor' doc='Copy debug output to the current terminal line' />
- </params>
- </command>
- <command id='terminal no monitor'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='monitor' doc='Copy debug output to the current terminal line' />
- </params>
- </command>
- <command id='show trx'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='trx' doc='Display information on the TRX' />
- </params>
- </command>
- <command id='logging enable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='enable' doc='Enables logging to this vty' />
- </params>
- </command>
- <command id='logging disable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='disable' doc='Disables logging to this vty' />
- </params>
- </command>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don't use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging print extended-timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='extended-timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
- </params>
- </command>
- <command id='logging print category (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem name' />
- </params>
- </command>
- <command id='logging print category-hex (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category-hex' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
- </params>
- </command>
- <command id='logging print level (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='level' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the log level name' />
- </params>
- </command>
- <command id='logging print file (0|1|basename)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='file' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the source file and line' />
- <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
- </params>
- </command>
- <command id='logging set-log-mask MASK'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='set-log-mask' doc='Set the logmask of this logging target' />
- <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
- </params>
- </command>
- <command id='logging set log mask MASK'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='set' doc='Decide which categories to output.' />
- <param name='log' doc='Log commands' />
- <param name='mask' doc='Mask commands' />
- <param name='MASK' doc=''set log mask' is deprecated, please refer to the docs of 'set-log-mask' instead' />
- </params>
- </command>
- <command id='logging level (all|main|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
- <param name='main' doc='Main generic category' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='lctrl' doc='Control Interface' />
- <param name='lgtp' doc='GPRS GTP library' />
- <param name='lstats' doc='Statistics messages and logging' />
- <param name='lgsup' doc='Generic Subscriber Update Protocol' />
- <param name='loap' doc='Osmocom Authentication Protocol' />
- <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
- <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
- <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
- <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
- <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
- <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='everything' doc='Don't use. It doesn't log anything' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='show logging vty'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='logging' doc='Show current logging configuration' />
- <param name='vty' doc='Show current logging configuration for this vty' />
- </params>
- </command>
- <command id='show alarms'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='alarms' doc='Show current logging configuration' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='tree' doc='Display only a specific memory chunk' />
- <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='filter' doc='Filter chunks using regular expression' />
- <param name='REGEXP' doc='Regular expression' />
- </params>
- </command>
- <command id='show stats'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- </params>
- </command>
- <command id='show stats level (global|peer|subscriber)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- <param name='level' doc='Set the maximum group level' />
- <param name='global' doc='Show global groups only' />
- <param name='peer' doc='Show global and network peer related groups' />
- <param name='subscriber' doc='Show global, peer, and subscriber groups' />
- </params>
- </command>
- <command id='show asciidoc counters'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='asciidoc' doc='Asciidoc generation' />
- <param name='counters' doc='Generate table of all registered counters' />
- </params>
- </command>
- </node>
- <node id='config'>
- <name>config</name>
- <command id='hostname WORD'>
- <params>
- <param name='hostname' doc='Set system's network name' />
- <param name='WORD' doc='This system's network name' />
- </params>
- </command>
- <command id='no hostname [HOSTNAME]'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='hostname' doc='Reset system's network name' />
- <param name='[HOSTNAME]' doc='Host name of this router' />
- </params>
- </command>
- <command id='password (8|) WORD'>
- <params>
- <param name='password' doc='Assign the terminal connection password' />
- <param name='8' doc='Specifies a HIDDEN password will follow' />
- <param name='' doc='dummy string ' />
- <param name='WORD' doc='The HIDDEN line password string' />
- </params>
- </command>
- <command id='password LINE'>
- <params>
- <param name='password' doc='Assign the terminal connection password' />
- <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
- </params>
- </command>
- <command id='enable password (8|) WORD'>
- <params>
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- <param name='8' doc='Specifies a HIDDEN password will follow' />
- <param name='' doc='dummy string ' />
- <param name='WORD' doc='The HIDDEN 'enable' password string' />
- </params>
- </command>
- <command id='enable password LINE'>
- <params>
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
- </params>
- </command>
- <command id='no enable password'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- </params>
- </command>
- <command id='banner motd default'>
- <params>
- <param name='banner' doc='Set banner string' />
- <param name='motd' doc='Strings for motd' />
- <param name='default' doc='Default string' />
- </params>
- </command>
- <command id='banner motd file [FILE]'>
- <params>
- <param name='banner' doc='Set banner' />
- <param name='motd' doc='Banner for motd' />
- <param name='file' doc='Banner from a file' />
- <param name='[FILE]' doc='Filename' />
- </params>
- </command>
- <command id='no banner motd'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='banner' doc='Set banner string' />
- <param name='motd' doc='Strings for motd' />
- </params>
- </command>
- <command id='service terminal-length <0-512>'>
- <params>
- <param name='service' doc='Set up miscellaneous service' />
- <param name='terminal-length' doc='System wide terminal length configuration' />
- <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
- </params>
- </command>
- <command id='no service terminal-length [<0-512>]'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='service' doc='Set up miscellaneous service' />
- <param name='terminal-length' doc='System wide terminal length configuration' />
- <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
- </params>
- </command>
- <command id='line vty'>
- <params>
- <param name='line' doc='Configure a terminal line' />
- <param name='vty' doc='Virtual terminal' />
- </params>
- </command>
- <command id='service advanced-vty'>
- <params>
- <param name='service' doc='Set up miscellaneous service' />
- <param name='advanced-vty' doc='Enable advanced mode vty interface' />
- </params>
- </command>
- <command id='no service advanced-vty'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='service' doc='Set up miscellaneous service' />
- <param name='advanced-vty' doc='Enable advanced mode vty interface' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='ctrl'>
- <params>
- <param name='ctrl' doc='Configure the Control Interface' />
- </params>
- </command>
- <command id='trx'>
- <params>
- <param name='trx' doc='Configure the TRX' />
- </params>
- </command>
- <command id='log stderr'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='stderr' doc='Logging via STDERR of the process' />
- </params>
- </command>
- <command id='no log stderr'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='stderr' doc='Logging via STDERR of the process' />
- </params>
- </command>
- <command id='log file .FILENAME'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='file' doc='Logging to text file' />
- <param name='.FILENAME' doc='Filename' />
- </params>
- </command>
- <command id='no log file .FILENAME'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='file' doc='Logging to text file' />
- <param name='.FILENAME' doc='Filename' />
- </params>
- </command>
- <command id='log alarms <2-32700>'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='alarms' doc='Logging alarms to osmo_strrb' />
- <param name='<2-32700>' doc='Maximum number of messages to log' />
- </params>
- </command>
- <command id='no log alarms'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='alarms' doc='Logging alarms to osmo_strrb' />
- </params>
- </command>
- <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- <param name='authpriv' doc='Security/authorization messages facility' />
- <param name='cron' doc='Clock daemon (cron/at) facility' />
- <param name='daemon' doc='General system daemon facility' />
- <param name='ftp' doc='Ftp daemon facility' />
- <param name='lpr' doc='Line printer facility' />
- <param name='mail' doc='Mail facility' />
- <param name='news' doc='News facility' />
- <param name='user' doc='Generic facility' />
- <param name='uucp' doc='UUCP facility' />
- </params>
- </command>
- <command id='log syslog local <0-7>'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- <param name='local' doc='Syslog LOCAL facility' />
- <param name='<0-7>' doc='Local facility number' />
- </params>
- </command>
- <command id='no log syslog'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- </params>
- </command>
- <command id='log gsmtap [HOSTNAME]'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='gsmtap' doc='Logging via GSMTAP' />
- <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
- </params>
- </command>
- <command id='stats reporter statsd'>
- <params>
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='statsd' doc='Report to a STATSD server' />
- </params>
- </command>
- <command id='no stats reporter statsd'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='statsd' doc='Report to a STATSD server' />
- </params>
- </command>
- <command id='stats reporter log'>
- <params>
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='log' doc='Report to the logger' />
- </params>
- </command>
- <command id='no stats reporter log'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='log' doc='Report to the logger' />
- </params>
- </command>
- <command id='stats interval <1-65535>'>
- <params>
- <param name='stats' doc='Configure stats sub-system' />
- <param name='interval' doc='Set the reporting interval' />
- <param name='<1-65535>' doc='Interval in seconds' />
- </params>
- </command>
- </node>
- <node id='config-log'>
- <name>config-log</name>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don't use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging print extended-timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='extended-timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
- </params>
- </command>
- <command id='logging print category (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem name' />
- </params>
- </command>
- <command id='logging print category-hex (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category-hex' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
- </params>
- </command>
- <command id='logging print level (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='level' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the log level name' />
- </params>
- </command>
- <command id='logging print file (0|1|basename)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='file' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the source file and line' />
- <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
- </params>
- </command>
- <command id='logging level (all|main|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
- <param name='main' doc='Main generic category' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='lctrl' doc='Control Interface' />
- <param name='lgtp' doc='GPRS GTP library' />
- <param name='lstats' doc='Statistics messages and logging' />
- <param name='lgsup' doc='Generic Subscriber Update Protocol' />
- <param name='loap' doc='Osmocom Authentication Protocol' />
- <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
- <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
- <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
- <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
- <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
- <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='everything' doc='Don't use. It doesn't log anything' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- </node>
- <node id='config-stats'>
- <name>config-stats</name>
- <command id='local-ip ADDR'>
- <params>
- <param name='local-ip' doc='Set the IP address to which we bind locally' />
- <param name='ADDR' doc='IP Address' />
- </params>
- </command>
- <command id='no local-ip'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='local-ip' doc='Set the IP address to which we bind locally' />
- </params>
- </command>
- <command id='remote-ip ADDR'>
- <params>
- <param name='remote-ip' doc='Set the remote IP address to which we connect' />
- <param name='ADDR' doc='IP Address' />
- </params>
- </command>
- <command id='remote-port <1-65535>'>
- <params>
- <param name='remote-port' doc='Set the remote port to which we connect' />
- <param name='<1-65535>' doc='Remote port number' />
- </params>
- </command>
- <command id='mtu <100-65535>'>
- <params>
- <param name='mtu' doc='Set the maximum packet size' />
- <param name='<100-65535>' doc='Size in byte' />
- </params>
- </command>
- <command id='no mtu'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='mtu' doc='Set the maximum packet size' />
- </params>
- </command>
- <command id='prefix PREFIX'>
- <params>
- <param name='prefix' doc='Set the item name prefix' />
- <param name='PREFIX' doc='The prefix string' />
- </params>
- </command>
- <command id='no prefix'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='prefix' doc='Set the item name prefix' />
- </params>
- </command>
- <command id='level (global|peer|subscriber)'>
- <params>
- <param name='level' doc='Set the maximum group level' />
- <param name='global' doc='Report global groups only' />
- <param name='peer' doc='Report global and network peer related groups' />
- <param name='subscriber' doc='Report global, peer, and subscriber groups' />
- </params>
- </command>
- <command id='enable'>
- <params>
- <param name='enable' doc='Enable the reporter' />
- </params>
- </command>
- <command id='disable'>
- <params>
- <param name='disable' doc='Disable the reporter' />
- </params>
- </command>
- </node>
- <node id='config-line'>
- <name>config-line</name>
- <command id='login'>
- <params>
- <param name='login' doc='Enable password checking' />
- </params>
- </command>
- <command id='no login'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='login' doc='Enable password checking' />
- </params>
- </command>
- <command id='bind A.B.C.D'>
- <params>
- <param name='bind' doc='Accept VTY telnet connections on local interface' />
- <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
- </params>
- </command>
- </node>
- <node id='config-ctrl'>
- <name>config-ctrl</name>
- <command id='bind A.B.C.D'>
- <params>
- <param name='bind' doc='Set bind address to listen for Control connections' />
- <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' />
- </params>
- </command>
- </node>
- <node id='config-trx'>
- <name>config-trx</name>
- <command id='bind-ip A.B.C.D'>
- <params>
- <param name='bind-ip' doc='Set the IP address for the local bind' />
- <param name='A.B.C.D' doc='IPv4 Address' />
- </params>
- </command>
- <command id='remote-ip A.B.C.D'>
- <params>
- <param name='remote-ip' doc='Set the IP address for the remote BTS' />
- <param name='A.B.C.D' doc='IPv4 Address' />
- </params>
- </command>
- <command id='base-port <1-65535>'>
- <params>
- <param name='base-port' doc='Set the TRX Base Port' />
- <param name='<1-65535>' doc='TRX Base Port' />
- </params>
- </command>
- <command id='dev-args DESC'>
- <params>
- <param name='dev-args' doc='Set the device-specific arguments to pass to the device' />
- <param name='DESC' doc='Device-specific arguments' />
- </params>
- </command>
- <command id='tx-sps (1|4)'>
- <params>
- <param name='tx-sps' doc='Set the Tx Samples-per-Symbol' />
- <param name='1' doc='Tx Samples-per-Symbol' />
- <param name='4' doc='(null)' />
- </params>
- </command>
- <command id='rx-sps (1|4)'>
- <params>
- <param name='rx-sps' doc='Set the Rx Samples-per-Symbol' />
- <param name='1' doc='Rx Samples-per-Symbol' />
- <param name='4' doc='(null)' />
- </params>
- </command>
- <command id='test rtsc <0-7>'>
- <params>
- <param name='test' doc='Set the Random Normal Burst test mode with TSC' />
- <param name='rtsc' doc='TSC' />
- <param name='<0-7>' doc='(null)' />
- </params>
- </command>
- <command id='test rach-delay <0-68>'>
- <params>
- <param name='test' doc='Set the Random Access Burst test mode with delay' />
- <param name='rach-delay' doc='RACH delay' />
- <param name='<0-68>' doc='(null)' />
- </params>
- </command>
- <command id='clock-ref (internal|external|gpsdo)'>
- <params>
- <param name='clock-ref' doc='Set the Reference Clock' />
- <param name='internal' doc='Enable internal referece (default)' />
- <param name='external' doc='Enable external 10 MHz reference' />
- <param name='gpsdo' doc='Enable GPSDO reference' />
- </params>
- </command>
- <command id='multi-arfcn (disable|enable)'>
- <params>
- <param name='multi-arfcn' doc='Enable multi-ARFCN transceiver (default=disable)' />
- <param name='disable' doc='(null)' />
- <param name='enable' doc='(null)' />
- </params>
- </command>
- <command id='offset FLOAT'>
- <params>
- <param name='offset' doc='Set the baseband frequency offset (default=0, auto)' />
- <param name='FLOAT' doc='Baseband Frequency Offset' />
- </params>
- </command>
- <command id='rssi-offset FLOAT'>
- <params>
- <param name='rssi-offset' doc='Set the RSSI to dBm offset in dB (default=0)' />
- <param name='FLOAT' doc='RSSI to dBm offset in dB' />
- </params>
- </command>
- <command id='swap-channels (disable|enable)'>
- <params>
- <param name='swap-channels' doc='Swap channels (default=disable)' />
- <param name='disable' doc='(null)' />
- <param name='enable' doc='(null)' />
- </params>
- </command>
- <command id='egprs (disable|enable)'>
- <params>
- <param name='egprs' doc='Enable EDGE receiver (default=disable)' />
- <param name='disable' doc='(null)' />
- <param name='enable' doc='(null)' />
- </params>
- </command>
- <command id='rt-prio <1-32>'>
- <params>
- <param name='rt-prio' doc='Set the SCHED_RR real-time priority' />
- <param name='<1-32>' doc='Real time priority' />
- </params>
- </command>
- <command id='filler dummy'>
- <params>
- <param name='filler' doc='Enable C0 filler table' />
- <param name='dummy' doc='Dummy method' />
- </params>
- </command>
- <command id='chan <0-100>'>
- <params>
- <param name='chan' doc='Select a channel to configure' />
- <param name='<0-100>' doc='Channel index' />
- </params>
- </command>
- </node>
- <node id='config-trx-chan'>
- <name>config-trx-chan</name>
- <command id='rx-path NAME'>
- <params>
- <param name='rx-path' doc='Set the Rx Path' />
- <param name='NAME' doc='Rx Path name' />
- </params>
- </command>
- <command id='tx-path NAME'>
- <params>
- <param name='tx-path' doc='Set the Tx Path' />
- <param name='NAME' doc='Tx Path name' />
- </params>
- </command>
- </node>
-</vtydoc>
diff --git a/configure.ac b/configure.ac
index e7c47a1..a6f29a0 100644
--- a/configure.ac
+++ b/configure.ac
@@ -32,5 +32,4 @@
OsmoMGCP/Makefile
OsmoNAT/Makefile
OsmoNITB/Makefile
- OsmoTRX/Makefile
OsmocomBB/Makefile)
--
To view, visit https://gerrit.osmocom.org/11970
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-gsm-manuals
Gerrit-Branch: master
Gerrit-MessageType: merged
Gerrit-Change-Id: If7cd43eec5f9d20f7f4200340e96ed0e0908e253
Gerrit-Change-Number: 11970
Gerrit-PatchSet: 2
Gerrit-Owner: osmith <osmith at sysmocom.de>
Gerrit-Reviewer: Jenkins Builder (1000002)
Gerrit-Reviewer: Pau Espin Pedrol <pespin at sysmocom.de>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181128/dea506dc/attachment.htm>