Change in osmo-gsm-manuals[master]: remove OsmoSTP files (now avail in libosmo-sccp.git)

osmith gerrit-no-reply at lists.osmocom.org
Wed Nov 28 10:00:17 UTC 2018


osmith has uploaded this change for review. ( https://gerrit.osmocom.org/11969


Change subject: remove OsmoSTP files (now avail in libosmo-sccp.git)
......................................................................

remove OsmoSTP files (now avail in libosmo-sccp.git)

Files were added in libosmo-sccp.git Change-Id
Ib5a22c2ea81fdde036bf9efb47d785a830b88c93

Depends: libosmo-sccp.git Change-Id Ib5a22c2ea81fdde036bf9efb47d785a830b88c93
Related: OS#3385
Change-Id: I971ef93a675412ea27d8bf193db6b9b35428f0bc
---
M Makefile.am
D OsmoSTP/Makefile.am
D OsmoSTP/chapters/overview.adoc
D OsmoSTP/osmostp-usermanual-docinfo.xml
D OsmoSTP/osmostp-usermanual.adoc
D OsmoSTP/osmostp-vty-reference.xml
D OsmoSTP/vty/osmo-stp_vty_reference.xml
M configure.ac
8 files changed, 0 insertions(+), 1,669 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-manuals refs/changes/69/11969/1

diff --git a/Makefile.am b/Makefile.am
index 6c2879f..eb86032 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -10,7 +10,6 @@
 	OsmoMGCP \
 	OsmoNAT \
 	OsmoNITB \
-	OsmoSTP \
 	OsmoTRX \
 	OsmocomBB
 
diff --git a/OsmoSTP/Makefile.am b/OsmoSTP/Makefile.am
deleted file mode 100644
index eb4ec9d..0000000
--- a/OsmoSTP/Makefile.am
+++ /dev/null
@@ -1,16 +0,0 @@
-OSMO_GSM_MANUALS_DIR = $(top_srcdir)
-EXTRA_DIST = osmostp-usermanual.adoc \
-	osmostp-usermanual-docinfo.xml \
-	osmostp-vty-reference.xml \
-	chapters \
-	vty
-
-ASCIIDOC = osmostp-usermanual.adoc
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.asciidoc.inc
-osmostp-usermanual.pdf: $(srcdir)/chapters/*.adoc
-aoip-mgw-options.pdf: $(srcdir)/aoip-mgw-options.adoc $(srcdir)/mgw/*.msc
-
-VTY_REFERENCE = osmostp-vty-reference.xml
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc
-
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc
diff --git a/OsmoSTP/chapters/overview.adoc b/OsmoSTP/chapters/overview.adoc
deleted file mode 100644
index e69de29..0000000
--- a/OsmoSTP/chapters/overview.adoc
+++ /dev/null
diff --git a/OsmoSTP/osmostp-usermanual-docinfo.xml b/OsmoSTP/osmostp-usermanual-docinfo.xml
deleted file mode 100644
index 4253957..0000000
--- a/OsmoSTP/osmostp-usermanual-docinfo.xml
+++ /dev/null
@@ -1,47 +0,0 @@
-<revhistory>
-  <revision>
-    <revnumber>1</revnumber>
-    <date>April 16, 2017</date>
-    <authorinitials>HW</authorinitials>
-    <revremark>
-      Initial OsmoSTP manual
-    </revremark>
-  </revision>
-</revhistory>
-
-<authorgroup>
-  <author>
-    <firstname>Harald</firstname>
-    <surname>Welte</surname>
-    <email>hwelte at sysmocom.de</email>
-    <authorinitials>HW</authorinitials>
-    <affiliation>
-      <shortaffil>sysmocom</shortaffil>
-      <orgname>sysmocom - s.f.m.c. GmbH</orgname>
-      <jobtitle>Managing Director</jobtitle>
-    </affiliation>
-  </author>
-</authorgroup>
-
-<copyright>
-  <year>2012-2017</year>
-  <holder>sysmocom - s.f.m.c. GmbH</holder>
-</copyright>
-
-<legalnotice>
-  <para>
-	Permission is granted to copy, distribute and/or modify this
-	document under the terms of the GNU Free Documentation License,
-	Version 1.3 or any later version published by the Free Software
-	Foundation; with the Invariant Sections being just 'Foreword',
-	'Acknowledgements' and 'Preface', with no Front-Cover Texts,
-	and no Back-Cover Texts.  A copy of the license is included in
-	the section entitled "GNU Free Documentation License".
-  </para>
-  <para>
-	The Asciidoc source code of this manual can be found at
-	<ulink url="http://git.osmocom.org/osmo-gsm-manuals/">
-		http://git.osmocom.org/osmo-gsm-manuals/
-	</ulink>
-  </para>
-</legalnotice>
diff --git a/OsmoSTP/osmostp-usermanual.adoc b/OsmoSTP/osmostp-usermanual.adoc
deleted file mode 100644
index 9f41e5d..0000000
--- a/OsmoSTP/osmostp-usermanual.adoc
+++ /dev/null
@@ -1,34 +0,0 @@
-OsmoSTP User Manual
-===================
-Harald Welte <hwelte at sysmocom.de>
-
-
-include::./common/chapters/preface.adoc[]
-
-// include::{srcdir}/chapters/overview.adoc[]
-
-include::./common/chapters/sigtran.adoc[]
-
-include::./common/chapters/sigtran-osmocom.adoc[]
-
-//include::{srcdir}/chapters/running.adoc[]
-// include::{srcdir}/chapters/control.adoc[]
-
-include::./common/chapters/vty.adoc[]
-
-include::./common/chapters/logging.adoc[]
-
-//include::./common/chapters/bts.adoc[]
-
-//include::../OsmoNITB/chapters/bts-examples.adoc[]
-
-//include::./common/chapters/control_if.adoc[]
-
-include::./common/chapters/port_numbers.adoc[]
-
-include::./common/chapters/bibliography.adoc[]
-
-include::./common/chapters/glossary.adoc[]
-
-include::./common/chapters/gfdl.adoc[]
-
diff --git a/OsmoSTP/osmostp-vty-reference.xml b/OsmoSTP/osmostp-vty-reference.xml
deleted file mode 100644
index ae0f7b0..0000000
--- a/OsmoSTP/osmostp-vty-reference.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-  ex:ts=2:sw=42sts=2:et
-  -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
--->
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN"
-"http://docbook.org/xml/5.0/dtd/docbook.dtd" [
-<!ENTITY chapter-vty      SYSTEM      "./common/chapters/vty.xml" >
-<!ENTITY sections-vty     SYSTEM      "generated/docbook_vty.xml"  >
-]>
-
-<book>
-  <info>
-    <revhistory>
-        <revision>
-            <revnumber>v1</revnumber>
-            <date>April 16, 2017</date>
-            <authorinitials>h2</authorinitials>
-            <revremark>Initial</revremark>
-        </revision>
-    </revhistory>
-
-    <title>OsmoSTP VTY Reference</title>
-
-    <copyright>
-      <year>2012-2017</year>
-    </copyright>
-
-    <legalnotice>
-      <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved.
-      </para>
-    </legalnotice>
-  </info>
-
-  <!-- Main chapters-->
-  &chapter-vty;
-</book>
-
diff --git a/OsmoSTP/vty/osmo-stp_vty_reference.xml b/OsmoSTP/vty/osmo-stp_vty_reference.xml
deleted file mode 100644
index 308c369..0000000
--- a/OsmoSTP/vty/osmo-stp_vty_reference.xml
+++ /dev/null
@@ -1,1532 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-  <node id='_common_cmds_'>
-    <name>Common Commands</name>
-    <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-  </node>
-  <node id='view'>
-    <name>view</name>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='enable'>
-      <params>
-        <param name='enable' doc='Turn on privileged mode command' />
-      </params>
-    </command>
-    <command id='terminal length <0-512>'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
-      </params>
-    </command>
-    <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> users'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='users' doc='User Table' />
-      </params>
-    </command>
-    <command id='show cs7 (sua|m3ua|ipa) [<0-65534>]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='sua' doc='SCCP User Adaptation' />
-        <param name='m3ua' doc='MTP3 User Adaptation' />
-        <param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
-        <param name='[<0-65534>]' doc='Port Number' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> asp'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='asp' doc='Application Server Process (ASP)' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> as (active|all|m3ua|sua)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='as' doc='Application Server (AS)' />
-        <param name='active' doc='Display all active ASs' />
-        <param name='all' doc='Display all ASs (default)' />
-        <param name='m3ua' doc='Display all m3ua ASs' />
-        <param name='sua' doc='Display all SUA ASs' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> sccp addressbook'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='sccp' doc='Signalling Connection Control Part' />
-        <param name='addressbook' doc='List all SCCP addressbook entries' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> route'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='route' doc='Routing Table' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> sccp users'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='sccp' doc='Signalling Connection Control Part' />
-        <param name='users' doc='Show List of SCCP Users registered' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> sccp ssn <0-65535>'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='sccp' doc='Signalling Connection Control Part' />
-        <param name='ssn' doc='Find an SCCP User registered for the given SSN' />
-        <param name='<0-65535>' doc='Subsystem Number (SSN)' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> sccp connections'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='sccp' doc='Signalling Connection Control Part' />
-        <param name='connections' doc='Show List of active SCCP connections' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> sccp timers'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='sccp' doc='Signaling Connection Control Part' />
-        <param name='timers' doc='Show List of SCCP timers' />
-      </params>
-    </command>
-    <command id='show fsm NAME'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm' doc='Show information about finite state machines' />
-        <param name='NAME' doc='Display information about a single named finite state machine' />
-      </params>
-    </command>
-    <command id='show fsm all'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm' doc='Show information about finite state machines' />
-        <param name='all' doc='Display a list of all registered finite state machines' />
-      </params>
-    </command>
-    <command id='show fsm-instances NAME'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm-instances' doc='Show information about finite state machine instances' />
-        <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
-      </params>
-    </command>
-    <command id='show fsm-instances all'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm-instances' doc='Show information about finite state machine instances' />
-        <param name='all' doc='Display a list of all FSM instances of all finite state machine' />
-      </params>
-    </command>
-  </node>
-  <node id='enable'>
-    <name>enable</name>
-    <command id='disable'>
-      <params>
-        <param name='disable' doc='Turn off privileged mode command' />
-      </params>
-    </command>
-    <command id='configure terminal'>
-      <params>
-        <param name='configure' doc='Configuration from vty interface' />
-        <param name='terminal' doc='Configuration terminal' />
-      </params>
-    </command>
-    <command id='copy running-config startup-config'>
-      <params>
-        <param name='copy' doc='Copy configuration' />
-        <param name='running-config' doc='Copy running config to... ' />
-        <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
-      </params>
-    </command>
-    <command id='show startup-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='startup-config' doc='Contentes of startup configuration' />
-      </params>
-    </command>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='terminal length <0-512>'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='terminal monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='terminal no monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
-      </params>
-    </command>
-    <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> users'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='users' doc='User Table' />
-      </params>
-    </command>
-    <command id='show cs7 (sua|m3ua|ipa) [<0-65534>]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='sua' doc='SCCP User Adaptation' />
-        <param name='m3ua' doc='MTP3 User Adaptation' />
-        <param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
-        <param name='[<0-65534>]' doc='Port Number' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> asp'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='asp' doc='Application Server Process (ASP)' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> as (active|all|m3ua|sua)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='as' doc='Application Server (AS)' />
-        <param name='active' doc='Display all active ASs' />
-        <param name='all' doc='Display all ASs (default)' />
-        <param name='m3ua' doc='Display all m3ua ASs' />
-        <param name='sua' doc='Display all SUA ASs' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> sccp addressbook'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='sccp' doc='Signalling Connection Control Part' />
-        <param name='addressbook' doc='List all SCCP addressbook entries' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> route'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='route' doc='Routing Table' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> sccp users'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='sccp' doc='Signalling Connection Control Part' />
-        <param name='users' doc='Show List of SCCP Users registered' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> sccp ssn <0-65535>'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='sccp' doc='Signalling Connection Control Part' />
-        <param name='ssn' doc='Find an SCCP User registered for the given SSN' />
-        <param name='<0-65535>' doc='Subsystem Number (SSN)' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> sccp connections'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='sccp' doc='Signalling Connection Control Part' />
-        <param name='connections' doc='Show List of active SCCP connections' />
-      </params>
-    </command>
-    <command id='show cs7 instance <0-15> sccp timers'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='An instance of the SS7 stack' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-        <param name='sccp' doc='Signaling Connection Control Part' />
-        <param name='timers' doc='Show List of SCCP timers' />
-      </params>
-    </command>
-    <command id='show fsm NAME'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm' doc='Show information about finite state machines' />
-        <param name='NAME' doc='Display information about a single named finite state machine' />
-      </params>
-    </command>
-    <command id='show fsm all'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm' doc='Show information about finite state machines' />
-        <param name='all' doc='Display a list of all registered finite state machines' />
-      </params>
-    </command>
-    <command id='show fsm-instances NAME'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm-instances' doc='Show information about finite state machine instances' />
-        <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
-      </params>
-    </command>
-    <command id='show fsm-instances all'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='fsm-instances' doc='Show information about finite state machine instances' />
-        <param name='all' doc='Display a list of all FSM instances of all finite state machine' />
-      </params>
-    </command>
-  </node>
-  <node id='config'>
-    <name>config</name>
-    <command id='hostname WORD'>
-      <params>
-        <param name='hostname' doc='Set system's network name' />
-        <param name='WORD' doc='This system's network name' />
-      </params>
-    </command>
-    <command id='no hostname [HOSTNAME]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='hostname' doc='Reset system's network name' />
-        <param name='[HOSTNAME]' doc='Host name of this router' />
-      </params>
-    </command>
-    <command id='password (8|) WORD'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN line password string' />
-      </params>
-    </command>
-    <command id='password LINE'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
-      </params>
-    </command>
-    <command id='enable password (8|) WORD'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN 'enable' password string' />
-      </params>
-    </command>
-    <command id='enable password LINE'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
-      </params>
-    </command>
-    <command id='no enable password'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-      </params>
-    </command>
-    <command id='banner motd default'>
-      <params>
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-        <param name='default' doc='Default string' />
-      </params>
-    </command>
-    <command id='banner motd file [FILE]'>
-      <params>
-        <param name='banner' doc='Set banner' />
-        <param name='motd' doc='Banner for motd' />
-        <param name='file' doc='Banner from a file' />
-        <param name='[FILE]' doc='Filename' />
-      </params>
-    </command>
-    <command id='no banner motd'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-      </params>
-    </command>
-    <command id='service terminal-length <0-512>'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='no service terminal-length [<0-512>]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='line vty'>
-      <params>
-        <param name='line' doc='Configure a terminal line' />
-        <param name='vty' doc='Virtual terminal' />
-      </params>
-    </command>
-    <command id='service advanced-vty'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='no service advanced-vty'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='log stderr'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='no log stderr'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='log file .FILENAME'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='no log file .FILENAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='log alarms <2-32700>'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-        <param name='<2-32700>' doc='Maximum number of messages to log' />
-      </params>
-    </command>
-    <command id='no log alarms'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-      </params>
-    </command>
-    <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='authpriv' doc='Security/authorization messages facility' />
-        <param name='cron' doc='Clock daemon (cron/at) facility' />
-        <param name='daemon' doc='General system daemon facility' />
-        <param name='ftp' doc='Ftp daemon facility' />
-        <param name='lpr' doc='Line printer facility' />
-        <param name='mail' doc='Mail facility' />
-        <param name='news' doc='News facility' />
-        <param name='user' doc='Generic facility' />
-        <param name='uucp' doc='UUCP facility' />
-      </params>
-    </command>
-    <command id='log syslog local <0-7>'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='local' doc='Syslog LOCAL facility' />
-        <param name='<0-7>' doc='Local facility number' />
-      </params>
-    </command>
-    <command id='no log syslog'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-      </params>
-    </command>
-    <command id='log gsmtap [HOSTNAME]'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='gsmtap' doc='Logging via GSMTAP' />
-        <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
-      </params>
-    </command>
-    <command id='cs7 instance <0-15>'>
-      <params>
-        <param name='cs7' doc='ITU-T Signaling System 7' />
-        <param name='instance' doc='Configure a SS7 Instance' />
-        <param name='<0-15>' doc='An instance of the SS7 stack' />
-      </params>
-    </command>
-  </node>
-  <node id='config-log'>
-    <name>config-log</name>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging level (lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
-      </params>
-    </command>
-  </node>
-  <node id='config-line'>
-    <name>config-line</name>
-    <command id='login'>
-      <params>
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='no login'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='bind A.B.C.D'>
-      <params>
-        <param name='bind' doc='Accept VTY telnet connections on local interface' />
-        <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
-      </params>
-    </command>
-  </node>
-  <node id='config-cs7'>
-    <name>config-cs7</name>
-    <command id='description .TEXT'>
-      <params>
-        <param name='description' doc='Save human-readable description of the object' />
-        <param name='.TEXT' doc='Text until the end of the line' />
-      </params>
-    </command>
-    <command id='network-indicator (international | national | reserved | spare)'>
-      <params>
-        <param name='network-indicator' doc='Configure the Network Indicator' />
-        <param name='international' doc='International Network' />
-        <param name='national' doc='National Network' />
-        <param name='reserved' doc='Reserved Network' />
-        <param name='spare' doc='Spare Network' />
-      </params>
-    </command>
-    <command id='point-code POINT_CODE'>
-      <params>
-        <param name='point-code' doc='Configure the local Point Code' />
-        <param name='POINT_CODE' doc='Point Code' />
-      </params>
-    </command>
-    <command id='point-code format <1-24> [<1-23>] [<1-22>]'>
-      <params>
-        <param name='point-code' doc='Point Code' />
-        <param name='format' doc='Configure Point Code Format' />
-        <param name='<1-24>' doc='Length of first PC component' />
-        <param name='[<1-23>]' doc='Length of second PC component' />
-        <param name='[<1-22>]' doc='Length of third PC component' />
-      </params>
-    </command>
-    <command id='point-code format default'>
-      <params>
-        <param name='point-code' doc='Point Code' />
-        <param name='format' doc='Configure Point Code Format' />
-        <param name='default' doc='Default Point Code Format (3.8.3)' />
-      </params>
-    </command>
-    <command id='point-code delimiter (default|dash)'>
-      <params>
-        <param name='point-code' doc='Point Code' />
-        <param name='delimiter' doc='Configure Point Code Delimiter' />
-        <param name='default' doc='Use dot as delimiter' />
-        <param name='dash' doc='User dash as delimiter' />
-      </params>
-    </command>
-    <command id='xua rkm routing-key-allocation (static-only|dynamic-permitted)'>
-      <params>
-        <param name='xua' doc='SIGTRAN xxxUA related' />
-        <param name='rkm' doc='Routing Key Management' />
-        <param name='routing-key-allocation' doc='Routing Key Management Allocation Policy' />
-        <param name='static-only' doc='Only static (pre-confgured) Routing Keys permitted' />
-        <param name='dynamic-permitted' doc='Dynamically allocate Routing Keys for what ASPs request' />
-      </params>
-    </command>
-    <command id='asp NAME <0-65535> <0-65535> (sua|m3ua|ipa)'>
-      <params>
-        <param name='asp' doc='Configure Application Server Process' />
-        <param name='NAME' doc='Name of ASP' />
-        <param name='<0-65535>' doc='Remote SCTP port number' />
-        <param name='<0-65535>' doc='Local SCTP port number' />
-        <param name='sua' doc='SCCP User Adaptation' />
-        <param name='m3ua' doc='MTP3 User Adaptation' />
-        <param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
-      </params>
-    </command>
-    <command id='no asp NAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='asp' doc='Disable Application Server Process' />
-        <param name='NAME' doc='Name of ASP' />
-      </params>
-    </command>
-    <command id='as NAME (sua|m3ua|ipa)'>
-      <params>
-        <param name='as' doc='Configure an Application Server' />
-        <param name='NAME' doc='Name of the Application Server' />
-        <param name='sua' doc='SCCP User Adaptation' />
-        <param name='m3ua' doc='MTP3 User Adaptation' />
-        <param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
-      </params>
-    </command>
-    <command id='no as NAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='as' doc='Disable Application Server' />
-        <param name='NAME' doc='Name of AS' />
-      </params>
-    </command>
-    <command id='sccp-address NAME'>
-      <params>
-        <param name='sccp-address' doc='Create/Modify an SCCP addressbook entry' />
-        <param name='NAME' doc='Name of the SCCP Address' />
-      </params>
-    </command>
-    <command id='no sccp-address NAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='sccp-address' doc='Delete an SCCP addressbook entry' />
-        <param name='NAME' doc='Name of the SCCP Address' />
-      </params>
-    </command>
-    <command id='route-table system'>
-      <params>
-        <param name='route-table' doc='Specify the name of the route table' />
-        <param name='system' doc='Name of the route table' />
-      </params>
-    </command>
-    <command id='listen (sua|m3ua|ipa) <0-65534>'>
-      <params>
-        <param name='listen' doc='Configure/Enable xUA Listener' />
-        <param name='sua' doc='SCCP User Adaptation' />
-        <param name='m3ua' doc='MTP3 User Adaptation' />
-        <param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
-        <param name='<0-65534>' doc='SCTP Port number' />
-      </params>
-    </command>
-    <command id='no listen (sua|m3ua|ipa) <0-65534>'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='listen' doc='Disable xUA Listener on given SCTP Port' />
-        <param name='sua' doc='SCCP User Adaptation' />
-        <param name='m3ua' doc='MTP3 User Adaptation' />
-        <param name='ipa' doc='IPA Multiplex (SCCP Lite)' />
-        <param name='<0-65534>' doc='SCTP Port number' />
-      </params>
-    </command>
-    <command id='sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) <1-999999>'>
-      <params>
-        <param name='sccp-timer' doc='Configure SCCP timer values, see ITU-T Q.714' />
-        <param name='conn_est' doc='Waiting for connection confirm message, 1 to 2 minutes (default: 60)' />
-        <param name='ias' doc='Send keep-alive: on an idle connection, delay before sending an Idle Timer message, 5 to 10 minutes (default: 420)' />
-        <param name='iar' doc='Receive keep-alive: on an idle connection, delay until considering a connection as stale, 11 to 21 minutes (default: 900)' />
-        <param name='rel' doc='Waiting for release complete message, 10 to 20 seconds (default: 10)' />
-        <param name='repeat_rel' doc='Waiting for release complete message; or to repeat sending released message after the initial expiry, 10 to 20 seconds (default: 10)' />
-        <param name='int' doc='Waiting for release complete message; or to release connection resources, freeze the LRN and alert a maintenance function after the initial expiry, extending to 1 minute (default: 60)' />
-        <param name='guard' doc='Waiting to resume normal procedure for temporary connection sections during the restart procedure, 23 to 25 minutes (default: 1380)' />
-        <param name='reset' doc='Waiting to release temporary connection section or alert maintenance function after reset request message is sent, 10 to 20 seconds (default: 10)' />
-        <param name='reassembly' doc='Waiting to receive all the segments of the remaining segments, single segmented message after receiving the first segment, 10 to 20 seconds (default: 10)' />
-        <param name='<1-999999>' doc='Timer value, in seconds' />
-      </params>
-    </command>
-  </node>
-  <node id='config-cs7-as'>
-    <name>config-cs7-as</name>
-    <command id='description .TEXT'>
-      <params>
-        <param name='description' doc='Save human-readable description of the object' />
-        <param name='.TEXT' doc='Text until the end of the line' />
-      </params>
-    </command>
-    <command id='asp NAME'>
-      <params>
-        <param name='asp' doc='Specify that a given ASP is part of this AS' />
-        <param name='NAME' doc='Name of ASP to be added to AS' />
-      </params>
-    </command>
-    <command id='no asp NAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='asp' doc='Specify ASP to be removed from this AS' />
-        <param name='NAME' doc='Name of ASP to be removed' />
-      </params>
-    </command>
-    <command id='traffic-mode (broadcast | loadshare | roundrobin | override)'>
-      <params>
-        <param name='traffic-mode' doc='Specifies traffic mode of operation of the ASP within the AS' />
-        <param name='broadcast' doc='Broadcast to all ASP within AS' />
-        <param name='loadshare' doc='Share Load among all ASP within AS' />
-        <param name='roundrobin' doc='Round-Robin between all ASP within AS' />
-        <param name='override' doc='Override' />
-      </params>
-    </command>
-    <command id='recovery-timeout <1-2000>'>
-      <params>
-        <param name='recovery-timeout' doc='Specifies the recovery timeout value in milliseconds' />
-        <param name='<1-2000>' doc='Recovery Timeout in Milliseconds' />
-      </params>
-    </command>
-    <command id='qos-class <0-255>'>
-      <params>
-        <param name='qos-class' doc='Specity QoS Class of AS' />
-        <param name='<0-255>' doc='QoS Class of AS' />
-      </params>
-    </command>
-    <command id='routing-key RCONTEXT DPC'>
-      <params>
-        <param name='routing-key' doc='Define a routing key' />
-        <param name='RCONTEXT' doc='Routing context number' />
-        <param name='DPC' doc='Destination Point Code' />
-      </params>
-    </command>
-    <command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup)'>
-      <params>
-        <param name='routing-key' doc='Define a routing key' />
-        <param name='RCONTEXT' doc='Routing context number' />
-        <param name='DPC' doc='Destination Point Code' />
-        <param name='si' doc='Match on Service Indicator' />
-        <param name='aal2' doc='ATM Adaption Layer 2' />
-        <param name='bicc' doc='Bearer Independent Call Control' />
-        <param name='b-isup' doc='Broadband ISDN User Part' />
-        <param name='h248' doc='H.248' />
-        <param name='isup' doc='ISDN User Part' />
-        <param name='sat-isup' doc='Sattelite ISDN User Part' />
-        <param name='sccp' doc='Signalling Connection Control Part' />
-        <param name='tup' doc='Telephony User Part' />
-      </params>
-    </command>
-    <command id='routing-key RCONTEXT DPC ssn SSN'>
-      <params>
-        <param name='routing-key' doc='Define a routing key' />
-        <param name='RCONTEXT' doc='Routing context number' />
-        <param name='DPC' doc='Destination Point Code' />
-        <param name='ssn' doc='Match on Sub-System Number' />
-        <param name='SSN' doc='Sub-System Number to match on' />
-      </params>
-    </command>
-    <command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn SSN'>
-      <params>
-        <param name='routing-key' doc='Define a routing key' />
-        <param name='RCONTEXT' doc='Routing context number' />
-        <param name='DPC' doc='Destination Point Code' />
-        <param name='si' doc='Match on Service Indicator' />
-        <param name='aal2' doc='ATM Adaption Layer 2' />
-        <param name='bicc' doc='Bearer Independent Call Control' />
-        <param name='b-isup' doc='Broadband ISDN User Part' />
-        <param name='h248' doc='H.248' />
-        <param name='isup' doc='ISDN User Part' />
-        <param name='sat-isup' doc='Sattelite ISDN User Part' />
-        <param name='sccp' doc='Signalling Connection Control Part' />
-        <param name='tup' doc='Telephony User Part' />
-        <param name='ssn' doc='Match on Sub-System Number' />
-        <param name='SSN' doc='Sub-System Number to match on' />
-      </params>
-    </command>
-    <command id='point-code override dpc PC'>
-      <params>
-        <param name='point-code' doc='Point Code Specific Features' />
-        <param name='override' doc='Override (force) a point-code to hard-coded value' />
-        <param name='dpc' doc='Override Source Point Code' />
-        <param name='PC' doc='Override Destination Point Code' />
-      </params>
-    </command>
-  </node>
-  <node id='config-cs7-asp'>
-    <name>config-cs7-asp</name>
-    <command id='description .TEXT'>
-      <params>
-        <param name='description' doc='Save human-readable description of the object' />
-        <param name='.TEXT' doc='Text until the end of the line' />
-      </params>
-    </command>
-    <command id='remote-ip A.B.C.D'>
-      <params>
-        <param name='remote-ip' doc='Specify Remote IP Address of ASP' />
-        <param name='A.B.C.D' doc='Remote IP Address of ASP' />
-      </params>
-    </command>
-    <command id='local-ip A.B.C.D'>
-      <params>
-        <param name='local-ip' doc='Specify Local IP Address from which to contact ASP' />
-        <param name='A.B.C.D' doc='Local IP Address from which to contact of ASP' />
-      </params>
-    </command>
-    <command id='qos-class <0-255>'>
-      <params>
-        <param name='qos-class' doc='Specify QoS Class of ASP' />
-        <param name='<0-255>' doc='QoS Class of ASP' />
-      </params>
-    </command>
-    <command id='block'>
-      <params>
-        <param name='block' doc='Allows a SCTP Association with ASP, but doesn't let it become active' />
-      </params>
-    </command>
-    <command id='shutdown'>
-      <params>
-        <param name='shutdown' doc='Terminates SCTP association; New associations will be rejected' />
-      </params>
-    </command>
-  </node>
-  <node id='config-cs7-listen'>
-    <name>config-cs7-listen</name>
-    <command id='local-ip A.B.C.D'>
-      <params>
-        <param name='local-ip' doc='Configure the Local IP Address for xUA' />
-        <param name='A.B.C.D' doc='IP Address to use for XUA' />
-      </params>
-    </command>
-    <command id='accept-asp-connections (pre-configured|dynamic-permitted)'>
-      <params>
-        <param name='accept-asp-connections' doc='Define what kind of ASP connections to accept' />
-        <param name='pre-configured' doc='Accept only pre-confiugred ASPs (source IP/prt)' />
-        <param name='dynamic-permitted' doc='Accept any connection and dynamically create an ASP definition' />
-      </params>
-    </command>
-  </node>
-  <node id='config-cs7-rt'>
-    <name>config-cs7-rt</name>
-    <command id='description .TEXT'>
-      <params>
-        <param name='description' doc='Save human-readable description of the object' />
-        <param name='.TEXT' doc='Text until the end of the line' />
-      </params>
-    </command>
-    <command id='update route POINT_CODE MASK linkset LS_NAME [priority PRIO] [qos-class (CLASS|default)]'>
-      <params>
-        <param name='update' doc='Update the Route' />
-        <param name='route' doc='Update the Route' />
-        <param name='POINT_CODE' doc='Destination Point Code' />
-        <param name='MASK' doc='Point Code Mask' />
-        <param name='linkset' doc='Point Code Length' />
-        <param name='LS_NAME' doc='Specify Destination Linkset' />
-        <param name='[priority' doc='Linkset Name' />
-        <param name='PRIO]' doc='Specify Priority' />
-        <param name='[qos-class' doc='Priority' />
-        <param name='CLASS' doc='Specify QoS Class' />
-        <param name='default' doc='QoS Class' />
-        <param name=']' doc='Default QoS Class' />
-      </params>
-    </command>
-    <command id='remove route POINT_CODE MASK'>
-      <params>
-        <param name='remove' doc='Remove a Route' />
-        <param name='route' doc='Remove a Route' />
-        <param name='POINT_CODE' doc='Destination Point Code' />
-        <param name='MASK' doc='Point Code Mask' />
-      </params>
-    </command>
-  </node>
-  <node id='config-cs7-sccpaddr'>
-    <name>config-cs7-sccpaddr</name>
-    <command id='no point-code'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='point-code' doc='Remove point-code Number' />
-      </params>
-    </command>
-    <command id='no subsystem-number'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='subsystem-number' doc='Remove Subsystem Number' />
-      </params>
-    </command>
-    <command id='no global-title'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='global-title' doc='Remove Global Title' />
-      </params>
-    </command>
-    <command id='routing-indicator (GT|PC|IP)'>
-      <params>
-        <param name='routing-indicator' doc='Add Routing Indicator' />
-        <param name='GT' doc='by global-title' />
-        <param name='PC' doc='by point-code' />
-        <param name='IP' doc='by ip-address' />
-      </params>
-    </command>
-    <command id='point-code POINT_CODE'>
-      <params>
-        <param name='point-code' doc='Add point-code Number' />
-        <param name='POINT_CODE' doc='PC' />
-      </params>
-    </command>
-    <command id='subsystem-number <0-4294967295>'>
-      <params>
-        <param name='subsystem-number' doc='Add Subsystem Number' />
-        <param name='<0-4294967295>' doc='SSN' />
-      </params>
-    </command>
-    <command id='global-title'>
-      <params>
-        <param name='global-title' doc='Add/Modify Global Title' />
-      </params>
-    </command>
-  </node>
-  <node id='config-cs7-sccpaddr-gt'>
-    <name>config-cs7-sccpaddr-gt</name>
-    <command id='global-title-indicator <0-15>'>
-      <params>
-        <param name='global-title-indicator' doc='Set Global Title Indicator' />
-        <param name='<0-15>' doc='GTI' />
-      </params>
-    </command>
-    <command id='translation-type <0-255>'>
-      <params>
-        <param name='translation-type' doc='Set Global Title Translation Type' />
-        <param name='<0-255>' doc='TT' />
-      </params>
-    </command>
-    <command id='numbering-plan-indicator <0-15>'>
-      <params>
-        <param name='numbering-plan-indicator' doc='Set Global Title Numbering Plan Indicator' />
-        <param name='<0-15>' doc='NPI' />
-      </params>
-    </command>
-    <command id='nature-of-address-indicator <0-127>'>
-      <params>
-        <param name='nature-of-address-indicator' doc='Set Global Title Nature of Address Indicator' />
-        <param name='<0-127>' doc='NAI' />
-      </params>
-    </command>
-    <command id='digits DIGITS'>
-      <params>
-        <param name='digits' doc='Set Global Title Digits' />
-        <param name='DIGITS' doc='Number digits' />
-      </params>
-    </command>
-  </node>
-</vtydoc>
diff --git a/configure.ac b/configure.ac
index e036384..e7c47a1 100644
--- a/configure.ac
+++ b/configure.ac
@@ -32,6 +32,5 @@
     OsmoMGCP/Makefile
     OsmoNAT/Makefile
     OsmoNITB/Makefile
-    OsmoSTP/Makefile
     OsmoTRX/Makefile
     OsmocomBB/Makefile)

-- 
To view, visit https://gerrit.osmocom.org/11969
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-gsm-manuals
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I971ef93a675412ea27d8bf193db6b9b35428f0bc
Gerrit-Change-Number: 11969
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <osmith at sysmocom.de>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181128/b79f9196/attachment-0001.html>


More information about the gerrit-log mailing list