Build failed in Jenkins: master-simtrace2 » a1=default,a2=default,a3=default,osmocom-master-debian9 #203

jenkins at lists.osmocom.org jenkins at lists.osmocom.org
Wed Nov 28 06:52:02 UTC 2018


See <https://jenkins.osmocom.org/jenkins/job/master-simtrace2/a1=default,a2=default,a3=default,label=osmocom-master-debian9/203/display/redirect>

------------------------------------------
[...truncated 168.05 KB...]
      8	      0	      0	      8	      8	obj/owhw/dfu_boardver_adc.o
     30	     16	      0	     46	     2e	obj/owhw/dfu_manifest.o
    239	      0	      0	    239	     ef	obj/owhw/dfu_owhw.o
   1472	      1	      0	   1473	    5c1	obj/owhw/dfu_main.o
    244	      0	      0	    244	     f4	obj/owhw/dfu_dfu.o
    645	      4	      6	    655	    28f	obj/owhw/dfu_dfu_runtime.o
   3490	      0	    208	   3698	    e72	obj/owhw/dfu_card_emu.o
      0	      0	      0	      0	      0	obj/owhw/dfu_cciddriver.o
   2629	     12	      4	   2645	    a55	obj/owhw/dfu_iso7816_4.o
     96	      0	      0	     96	     60	obj/owhw/dfu_iso7816_fidi.o
      0	      0	      0	      0	      0	obj/owhw/dfu_mitm.o
   2308	   1152	      0	   3460	    d84	obj/owhw/dfu_mode_cardemu.o
      0	      0	      0	      0	      0	obj/owhw/dfu_mode_ccid.o
    352	      0	    520	    872	    368	obj/owhw/dfu_simtrace_iso7816.o
      0	      0	      0	      0	      0	obj/owhw/dfu_sniffer.o
    488	     40	      0	    528	    210	obj/owhw/dfu_tc_etu.o
    597	     48	      0	    645	    285	obj/owhw/dfu_usb.o
  26024	      0	  17988	  44012	   abec	bin/owhw-cardem-dfu.elf
=============== owhw / cardem RES:0 ==============

=============== FIRMWARE TESTS ===========
cc -g -Wall `pkg-config --cflags libosmocore` -I../src_simtrace -I../atmel_softpack_libraries/libchip_sam3s -I../atmel_softpack_libraries/libchip_sam3s/cmsis -I../atmel_softpack_libraries/libchip_sam3s/include -I../atmel_softpack_libraries/usb/include -I../libcommon/include -I../libboard/common/include -I../libboard/simtrace/include -I. -o card_emu_tests.hobj -c card_emu_tests.c
In file included from ../libboard/common/include/board_common.h:24:0,
                 from ../libboard/simtrace/include/board.h:21,
                 from ../atmel_softpack_libraries/libchip_sam3s/include/trace.h:70,
                 from ../libcommon/include/assert.h:60,
                 from card_emu_tests.c:4:
../atmel_softpack_libraries/libchip_sam3s/chip.h:11:6: warning: #warning Library does not support the specified chip, specifying sam3s4. [-Wcpp]
     #warning Library does not support the specified chip, specifying sam3s4.
      ^~~~~~~
card_emu_tests.c: In function ‘get_and_verify_rctx’:
card_emu_tests.c:171:34: warning: unused variable ‘td’ [-Wunused-variable]
  struct cardemu_usb_msg_tx_data *td;
                                  ^~
cc -g -Wall `pkg-config --cflags libosmocore` -I../src_simtrace -I../atmel_softpack_libraries/libchip_sam3s -I../atmel_softpack_libraries/libchip_sam3s/cmsis -I../atmel_softpack_libraries/libchip_sam3s/include -I../atmel_softpack_libraries/usb/include -I../libcommon/include -I../libboard/common/include -I../libboard/simtrace/include -I. -o card_emu.hobj -c ../libcommon/source/card_emu.c
In file included from ../libboard/common/include/board_common.h:24:0,
                 from ../libboard/simtrace/include/board.h:21,
                 from ../atmel_softpack_libraries/libchip_sam3s/include/trace.h:70,
                 from ../libcommon/include/assert.h:60,
                 from ../libcommon/source/card_emu.c:21:
../atmel_softpack_libraries/libchip_sam3s/chip.h:11:6: warning: #warning Library does not support the specified chip, specifying sam3s4. [-Wcpp]
     #warning Library does not support the specified chip, specifying sam3s4.
      ^~~~~~~
In file included from ../libcommon/source/card_emu.c:27:0:
../libcommon/include/utils.h:31:2: warning: #warning "local_irq_{save,restore}() not implemented" [-Wcpp]
 #warning "local_irq_{save,restore}() not implemented"
  ^~~~~~~
../libcommon/source/card_emu.c: In function ‘flush_rx_buffer’:
../libcommon/source/card_emu.c:279:11: warning: unused variable ‘data_len’ [-Wunused-variable]
  uint32_t data_len;
           ^~~~~~~~
cc -g -Wall `pkg-config --cflags libosmocore` -I../src_simtrace -I../atmel_softpack_libraries/libchip_sam3s -I../atmel_softpack_libraries/libchip_sam3s/cmsis -I../atmel_softpack_libraries/libchip_sam3s/include -I../atmel_softpack_libraries/usb/include -I../libcommon/include -I../libboard/common/include -I../libboard/simtrace/include -I. -o usb_buf.hobj -c ../libcommon/source/usb_buf.c
In file included from ../libboard/common/include/board_common.h:24:0,
                 from ../libboard/simtrace/include/board.h:21,
                 from ../libcommon/source/usb_buf.c:17:
../atmel_softpack_libraries/libchip_sam3s/chip.h:11:6: warning: #warning Library does not support the specified chip, specifying sam3s4. [-Wcpp]
     #warning Library does not support the specified chip, specifying sam3s4.
      ^~~~~~~
cc -g -Wall `pkg-config --cflags libosmocore` -I../src_simtrace -I../atmel_softpack_libraries/libchip_sam3s -I../atmel_softpack_libraries/libchip_sam3s/cmsis -I../atmel_softpack_libraries/libchip_sam3s/include -I../atmel_softpack_libraries/usb/include -I../libcommon/include -I../libboard/common/include -I../libboard/simtrace/include -I. -o iso7816_fidi.hobj -c ../libcommon/source/iso7816_fidi.c
In file included from ../libcommon/source/iso7816_fidi.c:22:0:
../libcommon/include/utils.h:31:2: warning: #warning "local_irq_{save,restore}() not implemented" [-Wcpp]
 #warning "local_irq_{save,restore}() not implemented"
  ^~~~~~~
cc `pkg-config --libs libosmocore` -o card_emu_test card_emu_tests.hobj card_emu.hobj usb_buf.hobj iso7816_fidi.hobj
tc_etu_init(tc_chan=23)
-I- 0: ATR set: 3b 02 14 50 
-I- 0: VCC activated
uart_enable(uart_chan=42, OFF)
-I- 0: CLK activated
uart_enable(uart_chan=42, OFF)
-I- 0: RST released
tc_etu_enable(tc_chan=23)
-I- 0: computed Fi(1) Di(1) ratio: 372
uart_update_fidi(uart_chan=42, fidi=372)
tc_etu_set_etu(tc_chan=23, etu=372)
tc_etu_set_wtime(tc_chan=23, wtime=2)
tc_etu_enable(tc_chan=23)
tc_etu_set_wtime(tc_chan=23, wtime=9600)
uart_enable(uart_chan=42, TX)
uart_interrupt(uart_chan=42)
receiving + verifying ATR:
UART_TX(3b)
UART_TX(02)
UART_TX(14)
UART_TX(50)
tc_etu_set_wtime(tc_chan=23, wtime=9600)
uart_enable(uart_chan=42, RX)
UART_RX(ff)
UART_RX(10)
UART_RX(00)
UART_RX(ef)
uart_enable(uart_chan=42, TX)
[L1]> 01 07 00 00 00 00 15 00 [L2]> 04 ff 10 00 ef 00 00 ff 10 00 ef 00 00 
UART_TX(ff)
UART_TX(10)
UART_TX(00)
UART_TX(ef)
-I- 0: computed FiDi ration -22 unsupported
uart_enable(uart_chan=42, RX)

==> transmitting APDU (HDR + PB + card-RX)
UART_RX(a0)
UART_RX(d2)
UART_RX(00)
UART_RX(00)
UART_RX(07)
uart_enable(uart_chan=42, TX)
-I- 0: send_tpdu_header: a0 d2 00 00 07
-I- 0: flush_rx_buffer (5)
[L1]> 01 06 00 00 00 00 13 00 [L2]> 01 00 00 00 05 00 a0 d2 00 00 07 
    flags=1, data= a0 d2 00 00 07
UART_TX(d2)
uart_enable(uart_chan=42, RX)
UART_RX(00)
UART_RX(01)
UART_RX(02)
UART_RX(03)
UART_RX(04)
UART_RX(05)
UART_RX(06)
-I- 0: flush_rx_buffer (7)
[L1]> 01 06 00 00 00 00 15 00 [L2]> 02 00 00 00 07 00 00 01 02 03 04 05 06 
    flags=2, data= 00 01 02 03 04 05 06
UART_TX(90)
UART_TX(00)
uart_enable(uart_chan=42, RX)
uart_enable(uart_chan=42, RX)
-I- 0: CLK deactivated
-I- 0: CLK activated

==> transmitting APDU (HDR + PB + card-TX)
UART_RX(a0)
UART_RX(b2)
UART_RX(00)
UART_RX(00)
UART_RX(0a)
uart_enable(uart_chan=42, TX)
-I- 0: send_tpdu_header: a0 b2 00 00 0a
-I- 0: flush_rx_buffer (5)
[L1]> 01 06 00 00 00 00 13 00 [L2]> 01 00 00 00 05 00 a0 b2 00 00 0a 
    flags=1, data= a0 b2 00 00 0a
UART_TX(b2)
UART_TX(00)
UART_TX(01)
UART_TX(02)
UART_TX(03)
UART_TX(04)
UART_TX(05)
UART_TX(06)
UART_TX(07)
UART_TX(08)
UART_TX(09)
UART_TX(90)
UART_TX(00)
uart_enable(uart_chan=42, RX)
uart_enable(uart_chan=42, RX)
-I- 0: CLK deactivated
-I- 0: CLK activated

==> transmitting APDU (HDR + PB + card-RX)
UART_RX(a0)
UART_RX(d2)
UART_RX(00)
UART_RX(00)
UART_RX(07)
uart_enable(uart_chan=42, TX)
-I- 0: send_tpdu_header: a0 d2 00 00 07
-I- 0: flush_rx_buffer (5)
[L1]> 01 06 00 00 00 00 13 00 [L2]> 01 00 00 00 05 00 a0 d2 00 00 07 
    flags=1, data= a0 d2 00 00 07
UART_TX(d2)
uart_enable(uart_chan=42, RX)
UART_RX(00)
UART_RX(01)
UART_RX(02)
UART_RX(03)
UART_RX(04)
UART_RX(05)
UART_RX(06)
-I- 0: flush_rx_buffer (7)
[L1]> 01 06 00 00 00 00 15 00 [L2]> 02 00 00 00 07 00 00 01 02 03 04 05 06 
    flags=2, data= 00 01 02 03 04 05 06
UART_TX(90)
UART_TX(00)
uart_enable(uart_chan=42, RX)
uart_enable(uart_chan=42, RX)
-I- 0: CLK deactivated
-I- 0: CLK activated

==> transmitting APDU (HDR + PB + card-TX)
UART_RX(a0)
UART_RX(b2)
UART_RX(00)
UART_RX(00)
UART_RX(0a)
uart_enable(uart_chan=42, TX)
-I- 0: send_tpdu_header: a0 b2 00 00 0a
-I- 0: flush_rx_buffer (5)
[L1]> 01 06 00 00 00 00 13 00 [L2]> 01 00 00 00 05 00 a0 b2 00 00 0a 
    flags=1, data= a0 b2 00 00 0a
UART_TX(b2)
UART_TX(00)
UART_TX(01)
UART_TX(02)
UART_TX(03)
UART_TX(04)
UART_TX(05)
UART_TX(06)
UART_TX(07)
UART_TX(08)
UART_TX(09)
UART_TX(90)
UART_TX(00)
uart_enable(uart_chan=42, RX)
uart_enable(uart_chan=42, RX)
-I- 0: CLK deactivated
-I- 0: CLK activated

=============== HOST START  ==============
cc -Wall -g `pkg-config --cflags libusb-1.0 libosmocore` -o simtrace2-remsim.o -c simtrace2-remsim.c
simtrace2-remsim.c: In function ‘main’:
simtrace2-remsim.c:598:6: warning: variable ‘skip_atr’ set but not used [-Wunused-but-set-variable]
  int skip_atr = 0;
      ^~~~~~~~
At top level:
simtrace2-remsim.c:389:12: warning: ‘process_do_error’ defined but not used [-Wunused-function]
 static int process_do_error(struct cardem_inst *ci, uint8_t *buf, int len)
            ^~~~~~~~~~~~~~~~
simtrace2-remsim.c:89:12: warning: ‘gsmtap_send_sim’ defined but not used [-Wunused-function]
 static int gsmtap_send_sim(const uint8_t *apdu, unsigned int len)
            ^~~~~~~~~~~~~~~
cc -Wall -g `pkg-config --cflags libusb-1.0 libosmocore` -o apdu_dispatch.o -c apdu_dispatch.c
cc -Wall -g `pkg-config --cflags libusb-1.0 libosmocore` -o simtrace2-discovery.o -c simtrace2-discovery.c
cc -Wall -g `pkg-config --cflags libusb-1.0 libosmocore` -o libusb_util.o -c libusb_util.c
cc -o simtrace2-remsim simtrace2-remsim.o apdu_dispatch.o simtrace2-discovery.o libusb_util.o `pkg-config --libs libusb-1.0 libosmocore` -pthread `pkg-config --libs libosmosim libpcsclite`
cc -Wall -g `pkg-config --cflags libusb-1.0 libosmocore` -o usb2udp.o -c usb2udp.c
cc -o simtrace2-remsim-usb2udp usb2udp.o simtrace2-discovery.o `pkg-config --libs libusb-1.0 libosmocore` -pthread
cc -Wall -g `pkg-config --cflags libusb-1.0 libosmocore` -o simtrace2_usb.o -c simtrace2_usb.c
cc -o simtrace2-list simtrace2_usb.o libusb_util.o `pkg-config --libs libusb-1.0 libosmocore` -pthread
cc -Wall -g `pkg-config --cflags libusb-1.0 libosmocore` -o simtrace2-sniff.o -c simtrace2-sniff.c
cc -o simtrace2-sniff simtrace2-sniff.o simtrace2-discovery.o libusb_util.o `pkg-config --libs libusb-1.0 libosmocore` -pthread

=============== UPLOAD BUILD  ==============
Warning: Permanently added the ECDSA host key for IP address '[144.76.43.76]:48' to the list of known hosts.
Permission denied (publickey,keyboard-interactive).
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(235) [sender=3.1.2]
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE


More information about the gerrit-log mailing list