This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has submitted this change and it was merged. ( https://gerrit.osmocom.org/11687 )
Change subject: ipaccess-config: Introduce -q quiet param
......................................................................
ipaccess-config: Introduce -q quiet param
This way only formated output is pinted to stdout when using -G and can
be used by other tools (osmo-gsm-tester) to get a json dictionary with interesting
information.
Related: OS#3624
Change-Id: I257bfc8d82b49a3641be6b6777e472ecf561a21e
---
M src/ipaccess/ipaccess-config.c
1 file changed, 43 insertions(+), 20 deletions(-)
Approvals:
Neels Hofmeyr: Looks good to me, approved
Jenkins Builder: Verified
diff --git a/src/ipaccess/ipaccess-config.c b/src/ipaccess/ipaccess-config.c
index dcaa756..7c81c5a 100644
--- a/src/ipaccess/ipaccess-config.c
+++ b/src/ipaccess/ipaccess-config.c
@@ -73,6 +73,7 @@
static char *firmware_analysis = NULL;
static int found_trx = 0;
static int loop_tests = 0;
+static bool quiet = false;
static void *tall_ctx_config = NULL;
static struct abis_nm_sw_desc *sw_load1 = NULL;
@@ -312,11 +313,13 @@
ipacc_data = signal_data;
return ipacc_msg_ack(ipacc_data->msg_type, ipacc_data->trx);
case S_NM_IPACC_RESTART_ACK:
- printf("The BTS has acked the restart. Exiting.\n");
+ if (!quiet)
+ printf("The BTS has acked the restart. Exiting.\n");
exit(0);
break;
case S_NM_IPACC_RESTART_NACK:
- printf("The BTS has nacked the restart. Exiting.\n");
+ if (!quiet)
+ printf("The BTS has nacked the restart. Exiting.\n");
exit(0);
break;
case S_NM_STATECHG_OPER:
@@ -353,7 +356,8 @@
switch (event) {
case NM_MT_LOAD_INIT_ACK:
- fprintf(stdout, "Software Load Initiate ACK\n");
+ if (!quiet)
+ fprintf(stdout, "Software Load Initiate ACK\n");
break;
case NM_MT_LOAD_INIT_NACK:
fprintf(stderr, "ERROR: Software Load Initiate NACK\n");
@@ -379,7 +383,9 @@
msg->l2h[0] = NM_ATT_IPACC_CUR_SW_CFG;
msg->l2h[1] = msgb_l3len(msg) >> 8;
msg->l2h[2] = msgb_l3len(msg) & 0xff;
- printf("Foo l2h: %p l3h: %p... length l2: %u l3: %u\n", msg->l2h, msg->l3h, msgb_l2len(msg), msgb_l3len(msg));
+ if (!quiet)
+ printf("Foo l2h: %p l3h: %p... length l2: %u l3: %u\n",
+ msg->l2h, msg->l3h, msgb_l2len(msg), msgb_l3len(msg));
abis_nm_ipaccess_set_nvattr(trx, msg->l2h, msgb_l2len(msg));
msgb_free(msg);
break;
@@ -395,7 +401,7 @@
break;
case NM_MT_LOAD_SEG_ACK:
percent = abis_nm_software_load_status(trx->bts);
- if (percent > percent_old)
+ if (!quiet && percent > percent_old)
printf("Software Download Progress: %d%%\n", percent);
percent_old = percent;
break;
@@ -528,7 +534,8 @@
int need_to_set_attr = 0;
int len;
- printf("OML link established using TRX %d\n", trx->nr);
+ if (!quiet)
+ printf("OML link established using TRX %d\n", trx->nr);
if (get_attr) {
msgb_put_u8(nmsg_get, NM_ATT_IPACC_PRIM_OML_CFG);
@@ -538,7 +545,8 @@
len = strlen(unit_id);
if (len > nmsg_set->data_len-10)
goto out_err;
- printf("setting Unit ID to '%s'\n", unit_id);
+ if (!quiet)
+ printf("setting Unit ID to '%s'\n", unit_id);
nv_put_unit_id(nmsg_set, unit_id);
need_to_set_attr = 1;
}
@@ -551,13 +559,15 @@
goto out_err;
}
- printf("setting primary OML link IP to '%s'\n", inet_ntoa(ia));
+ if (!quiet)
+ printf("setting primary OML link IP to '%s'\n", inet_ntoa(ia));
nv_put_prim_oml(nmsg_set, ntohl(ia.s_addr), 0);
need_to_set_attr = 1;
}
if (nv_mask) {
- printf("setting NV Flags/Mask to 0x%04x/0x%04x\n",
- nv_flags, nv_mask);
+ if (!quiet)
+ printf("setting NV Flags/Mask to 0x%04x/0x%04x\n",
+ nv_flags, nv_mask);
nv_put_flags(nmsg_set, nv_flags, nv_mask);
need_to_set_attr = 1;
}
@@ -576,7 +586,8 @@
goto out_err;
}
- printf("setting static IP Address/Mask\n");
+ if (!quiet)
+ printf("setting static IP Address/Mask\n");
nv_put_ip_if_cfg(nmsg_set, ntohl(ia_addr.s_addr), ntohl(ia_mask.s_addr));
need_to_set_attr = 1;
}
@@ -589,7 +600,8 @@
goto out_err;
}
- printf("setting static IP Gateway\n");
+ if (!quiet)
+ printf("setting static IP Gateway\n");
/* we only set the default gateway with zero addr/mask */
nv_put_gw_cfg(nmsg_set, 0, 0, ntohl(ia_gw.s_addr));
need_to_set_attr = 1;
@@ -607,7 +619,8 @@
}
if (restart && !prim_oml_ip && !software) {
- printf("restarting BTS\n");
+ if (!quiet)
+ printf("restarting BTS\n");
abis_nm_ipaccess_restart(trx);
}
@@ -636,7 +649,8 @@
phys_conf_min, sizeof(phys_conf_min));
else if (software) {
int rc;
- printf("Attempting software upload with '%s'\n", software);
+ if (!quiet)
+ printf("Attempting software upload with '%s'\n", software);
rc = abis_nm_software_load(trx->bts, trx->nr, software, 19, 0, swload_cbfn, trx);
if (rc < 0) {
fprintf(stderr, "Failed to start software load\n");
@@ -769,7 +783,8 @@
entry = talloc_zero(tall_firm_ctx, struct llist_head);
INIT_LLIST_HEAD(entry);
- printf("Opening possible firmware '%s'\n", filename);
+ if (!quiet)
+ printf("Opening possible firmware '%s'\n", filename);
fd = open(filename, O_RDONLY);
if (fd < 0) {
perror("nada");
@@ -893,6 +908,7 @@
printf(" -f --firmware FIRMWARE\tProvide firmware information\n");
printf(" -w --write-firmware\t\tThis will dump the firmware parts to the filesystem. Use with -f.\n");
printf(" -p --loop\t\t\tLoop the tests executed with the --listen command.\n");
+ printf(" -q --quiet\t\t\tAvoid printing unformatted logging to stdout, useful with -G.\n");
}
static void print_value_string(const struct value_string *val, int size)
@@ -945,9 +961,6 @@
osmo_init_logging2(tall_ctx_config, &log_info);
bts_model_nanobts_init();
- printf("ipaccess-config (C) 2009-2010 by Harald Welte and others\n");
- printf("This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY\n\n");
-
while (1) {
int c;
unsigned long ul;
@@ -972,10 +985,11 @@
{ "write-firmware", 0, 0, 'w' },
{ "disable-color", 0, 0, 'c'},
{ "loop", 0, 0, 'p' },
+ { "quiet", 0, 0, 'q' },
{ 0, 0, 0, 0 },
};
- c = getopt_long(argc, argv, "Gu:o:i:g:rn:S:U:l:L:hs:d:f:wcpH", long_options,
+ c = getopt_long(argc, argv, "Gu:o:i:g:rn:S:U:l:L:hs:d:f:wcpqH", long_options,
&option_index);
if (c == -1)
@@ -1057,6 +1071,9 @@
case 'p':
loop_tests = 1;
break;
+ case 'q':
+ quiet = true;
+ break;
case 'h':
print_usage();
print_help();
@@ -1067,6 +1084,11 @@
}
};
+ if (!quiet) {
+ printf("ipaccess-config (C) 2009-2010 by Harald Welte and others\n");
+ printf("This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY\n\n");
+ }
+
if (firmware_analysis) {
analyze_firmware(firmware_analysis);
if (argc == optind) /* Nothing more to do, exit successfully */
@@ -1097,7 +1119,8 @@
ipac_nwl_init();
- printf("Trying to connect to ip.access BTS %s...\n", bts_ip);
+ if (!quiet)
+ printf("Trying to connect to ip.access BTS %s...\n", bts_ip);
memset(&sin, 0, sizeof(sin));
sin.sin_family = AF_INET;
--
To view, visit https://gerrit.osmocom.org/11687
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-MessageType: merged
Gerrit-Change-Id: I257bfc8d82b49a3641be6b6777e472ecf561a21e
Gerrit-Change-Number: 11687
Gerrit-PatchSet: 9
Gerrit-Owner: Pau Espin Pedrol <pespin at sysmocom.de>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Jenkins Builder (1000002)
Gerrit-Reviewer: Neels Hofmeyr <nhofmeyr at sysmocom.de>
Gerrit-Reviewer: Pau Espin Pedrol <pespin at sysmocom.de>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181122/68fe0634/attachment.htm>