This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Neels Hofmeyr gerrit-no-reply at lists.osmocom.orgNeels Hofmeyr has submitted this change and it was merged. ( https://gerrit.osmocom.org/11581 ) Change subject: vty doc: drop "(HO algo 2 only)" strings ...................................................................... vty doc: drop "(HO algo 2 only)" strings These indicators are a legacy of early handover_decision_2.c work, where there were no separate handover1 and handover2 config commands. No need to restate the abundantly obvious anymore. Change-Id: Id4d29542f7dd5bd125d6f10c7783569f13092612 --- M include/osmocom/bsc/handover_cfg.h M src/osmo-bsc/handover_vty.c M tests/handover_cfg.vty 3 files changed, 26 insertions(+), 27 deletions(-) Approvals: Neels Hofmeyr: Looks good to me, approved Jenkins Builder: Verified diff --git a/include/osmocom/bsc/handover_cfg.h b/include/osmocom/bsc/handover_cfg.h index 865fab9..92b5cd4 100644 --- a/include/osmocom/bsc/handover_cfg.h +++ b/include/osmocom/bsc/handover_cfg.h @@ -21,11 +21,10 @@ #define HO_CFG_STR_WIN_RXQUAL HO_CFG_STR_WIN "Received-Quality averaging\n" #define HO_CFG_STR_POWER_BUDGET "Neighbor cell power triggering\n" "Neighbor cell power triggering\n" #define HO_CFG_STR_AVG_COUNT "Number of values to average over\n" -#define HO_CFG_STR_2 " (HO algo 2 only)\n" -#define HO_CFG_STR_MIN "Minimum Level/Quality thresholds before triggering HO" HO_CFG_STR_2 -#define HO_CFG_STR_AFS_BIAS "Configure bias to prefer AFS (AMR on TCH/F) over other codecs" HO_CFG_STR_2 -#define HO_CFG_STR_MIN_TCH "Minimum free TCH timeslots before cell is considered congested" HO_CFG_STR_2 -#define HO_CFG_STR_PENALTY_TIME "Set penalty times to wait between repeated handovers" HO_CFG_STR_2 +#define HO_CFG_STR_MIN "Minimum Level/Quality thresholds before triggering HO\n" +#define HO_CFG_STR_AFS_BIAS "Configure bias to prefer AFS (AMR on TCH/F) over other codecs\n" +#define HO_CFG_STR_MIN_TCH "Minimum free TCH timeslots before cell is considered congested\n" +#define HO_CFG_STR_PENALTY_TIME "Set penalty times to wait between repeated handovers\n" #define as_is(x) (x) @@ -185,14 +184,14 @@ HO_CFG_ONE_MEMBER(bool, hodec2_as_active, 0, \ "handover2 ", "assignment", "0|1", a2bool, "%d", bool2i, \ HO_CFG_STR_HANDOVER2 \ - "Enable or disable in-call channel re-assignment" HO_CFG_STR_2 \ + "Enable or disable in-call channel re-assignment\n" \ "Disable in-call assignment\n" \ "Enable in-call assignment\n") \ \ HO_CFG_ONE_MEMBER(bool, hodec2_full_tdma, subset, \ "handover2 ", "tdma-measurement", "full|subset", a2tdma, "%s", tdma2a, \ HO_CFG_STR_HANDOVER2 \ - "Define measurement set of TDMA frames" HO_CFG_STR_2 \ + "Define measurement set of TDMA frames\n" \ "Full set of 102/104 TDMA frames\n" \ "Sub set of 4 TDMA frames (SACCH)\n") \ \ @@ -241,7 +240,7 @@ HO_CFG_ONE_MEMBER(int, hodec2_ho_max, 9999, \ "handover2 ", "max-handovers", "<1-9999>", atoi, "%d", as_is, \ HO_CFG_STR_HANDOVER2 \ - "Maximum number of concurrent handovers allowed per cell" HO_CFG_STR_2 \ + "Maximum number of concurrent handovers allowed per cell\n" \ "Number\n") \ \ HO_CFG_ONE_MEMBER(int, hodec2_penalty_max_dist, 300, \ @@ -268,7 +267,7 @@ HO_CFG_ONE_MEMBER(int, hodec2_retries, 0, \ "handover2 ", "retries", "<0-9>", atoi, "%d", as_is, \ HO_CFG_STR_HANDOVER2 \ - "Immediately retry on handover/assignment failure" HO_CFG_STR_2 \ + "Immediately retry on handover/assignment failure\n" \ "Number of retries\n") \ #define HO_CFG_ALL_MEMBERS \ diff --git a/src/osmo-bsc/handover_vty.c b/src/osmo-bsc/handover_vty.c index 51e448e..7979511 100644 --- a/src/osmo-bsc/handover_vty.c +++ b/src/osmo-bsc/handover_vty.c @@ -106,7 +106,7 @@ DEFUN(cfg_net_ho_congestion_check_interval, cfg_net_ho_congestion_check_interval_cmd, "handover2 congestion-check (disabled|<1-999>|now)", HO_CFG_STR_HANDOVER2 - "Configure congestion check interval" HO_CFG_STR_2 + "Configure congestion check interval\n" "Disable congestion checking, do not handover based on cell overload\n" "Congestion check interval in seconds (default " OSMO_STRINGIFY_VAL(HO_CFG_CONGESTION_CHECK_DEFAULT) ")\n" diff --git a/tests/handover_cfg.vty b/tests/handover_cfg.vty index 119eaf5..94c20d9 100644 --- a/tests/handover_cfg.vty +++ b/tests/handover_cfg.vty @@ -218,15 +218,15 @@ window Measurement averaging settings power Neighbor cell power triggering maximum Maximum Timing-Advance value (i.e. MS distance) before triggering HO - assignment Enable or disable in-call channel re-assignment (HO algo 2 only) - tdma-measurement Define measurement set of TDMA frames (HO algo 2 only) - min Minimum Level/Quality thresholds before triggering HO (HO algo 2 only) - afs-bias Configure bias to prefer AFS (AMR on TCH/F) over other codecs (HO algo 2 only) - min-free-slots Minimum free TCH timeslots before cell is considered congested (HO algo 2 only) - max-handovers Maximum number of concurrent handovers allowed per cell (HO algo 2 only) - penalty-time Set penalty times to wait between repeated handovers (HO algo 2 only) - retries Immediately retry on handover/assignment failure (HO algo 2 only) - congestion-check Configure congestion check interval (HO algo 2 only) + assignment Enable or disable in-call channel re-assignment + tdma-measurement Define measurement set of TDMA frames + min Minimum Level/Quality thresholds before triggering HO + afs-bias Configure bias to prefer AFS (AMR on TCH/F) over other codecs + min-free-slots Minimum free TCH timeslots before cell is considered congested + max-handovers Maximum number of concurrent handovers allowed per cell + penalty-time Set penalty times to wait between repeated handovers + retries Immediately retry on handover/assignment failure + congestion-check Configure congestion check interval OsmoBSC(config-net)# handover algorithm ? 1 Algorithm 1: trigger handover based on comparing current cell and neighbor RxLev and RxQual, only. @@ -437,14 +437,14 @@ window Measurement averaging settings power Neighbor cell power triggering maximum Maximum Timing-Advance value (i.e. MS distance) before triggering HO - assignment Enable or disable in-call channel re-assignment (HO algo 2 only) - tdma-measurement Define measurement set of TDMA frames (HO algo 2 only) - min Minimum Level/Quality thresholds before triggering HO (HO algo 2 only) - afs-bias Configure bias to prefer AFS (AMR on TCH/F) over other codecs (HO algo 2 only) - min-free-slots Minimum free TCH timeslots before cell is considered congested (HO algo 2 only) - max-handovers Maximum number of concurrent handovers allowed per cell (HO algo 2 only) - penalty-time Set penalty times to wait between repeated handovers (HO algo 2 only) - retries Immediately retry on handover/assignment failure (HO algo 2 only) + assignment Enable or disable in-call channel re-assignment + tdma-measurement Define measurement set of TDMA frames + min Minimum Level/Quality thresholds before triggering HO + afs-bias Configure bias to prefer AFS (AMR on TCH/F) over other codecs + min-free-slots Minimum free TCH timeslots before cell is considered congested + max-handovers Maximum number of concurrent handovers allowed per cell + penalty-time Set penalty times to wait between repeated handovers + retries Immediately retry on handover/assignment failure OsmoBSC(config-net-bts)# handover algorithm ? 1 Algorithm 1: trigger handover based on comparing current cell and neighbor RxLev and RxQual, only. -- To view, visit https://gerrit.osmocom.org/11581 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-MessageType: merged Gerrit-Change-Id: Id4d29542f7dd5bd125d6f10c7783569f13092612 Gerrit-Change-Number: 11581 Gerrit-PatchSet: 2 Gerrit-Owner: Neels Hofmeyr <nhofmeyr at sysmocom.de> Gerrit-Reviewer: Jenkins Builder (1000002) Gerrit-Reviewer: Neels Hofmeyr <nhofmeyr at sysmocom.de> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181106/d1da1ae5/attachment.htm>