[MERGED] openbsc[master]: Bump version: 1.0.0.45-2b362-dirty → 1.1.0

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

Harald Welte gerrit-no-reply at lists.osmocom.org
Fri May 4 11:08:19 UTC 2018


Harald Welte has submitted this change and it was merged.

Change subject: Bump version: 1.0.0.45-2b362-dirty → 1.1.0
......................................................................


Bump version: 1.0.0.45-2b362-dirty → 1.1.0

Change-Id: I04ccac3ce79b58d5ef0b3c0503ef38708dac05ff
---
M debian/changelog
M openbsc/configure.ac
2 files changed, 75 insertions(+), 13 deletions(-)

Approvals:
  Harald Welte: Looks good to me, approved
  Jenkins Builder: Verified



diff --git a/debian/changelog b/debian/changelog
index ab33e8e..a157b2e 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,65 @@
+openbsc (1.1.0) unstable; urgency=medium
+
+  [ Neels Hofmeyr ]
+  * debian/rules: show testsuite.log when tests are failing
+  * vty: skip installing cmds now always installed by default
+  * vty: skip installing cmds now always installed by default
+  * sms.db: silence libdbi warnings on out-of-range index
+  * fix build: gprs_ra_id_by_bts(): ensure to init all values
+  * backport support for 3-digit MNC with leading zeros
+  * Migrate from OpenSSL to osmo_get_rand_id()
+
+  [ Harald Welte ]
+  * osmo-bsc: Print NOTICE message on unimplemented BSSMAP UDT
+  * osmo-bsc-sccplite: Implement incoming RESET procedure
+  * mgcp_transcoding_test: Add LIBOSMOABIS_CFLAGS
+  * sysinfo: Fix regression causing missing L2 Pseudo-Length in SI5/SI6
+    (Closes: #3059)
+
+  [ Pau Espin Pedrol ]
+  * Use type bool for boolean fields in gsm48_si_ro_info
+  * vty: Add cmd to configure 3g Early Classmark Sending
+  * mgcp_protocol: Don't print osmux stats if it is off
+  * bsc: Improve handling of paging_request return value
+  * bsc: paging: Fix losing paging messages for BTS
+  * libbsc: set_net_mcc_mnc_apply: Fix memleak on parsing incorrect mcc mnc
+  * bsc_nat: ctrl: fix memleak on reply receival
+  * bsc_nat: forward_to_bsc: remove one level of indentation
+  * bsc_nat: forward_to_bsc: Fix memleak on send failure
+  * bsc_nat: Drop redundant ccon ptr in bsc_cmd_list
+  * bsc_nat: ctrl: Fix crash on receveing bsc reply
+  * nat: Add jitter buffer on the uplink receiver
+  * smpp_smsc_conf: Fix heap-use-after-free
+  * chan_alloc.c: Fix log var formatting issues
+  * mgcp: switch to new osmux output APIs
+  * debian/changelog: change last release for unreleased to unstable
+
+  [ Max ]
+  * Fix tests after rate_ctr change
+
+  [ Vadim Yanitskiy ]
+  * libmsc: add support for both comp128v2 and comp128v3
+  * gsm_04_80.h: use '#pragma once' instead of includes
+  * gsm_04_80.h: cosmetic: whitespace fix
+  * src/libmsc/ussd.c: drop useless forward declaration
+
+  [ Stefan Sperling ]
+  * Make "waiting indicator" of IMMEDIATE ASSIGN REJECT dynamic.
+  * bts chan_load: ignore unusable BTS
+  * Add stat items for the BTS's channel load average and T3122.
+  * Add support for Access Control Class ramping.
+  * fix a format string error in bts_update_t3122_chan_load()
+  * fix initialization of acc ramping
+  * only log actual access control class ramping changes
+  * ensure that acc_ramp_init() is only called once
+  * trigger acc ramping based on trx rf-locked state
+  * rename helper functions in the acc ramp code to avoid confusion
+  * trigger acc ramping on state-changed-event reports
+  * only trigger acc ramping if trx 0 is usable and unlocked
+  * fix handling of state changes in acc ramping
+
+ -- Pau Espin Pedrol <pespin at sysmocom.de>  Fri, 04 May 2018 12:45:08 +0200
+
 openbsc (1.0.0) unstable; urgency=medium
 
   [ Holger Hans Peter Freyther ]
diff --git a/openbsc/configure.ac b/openbsc/configure.ac
index 7183fda..2c3045a 100644
--- a/openbsc/configure.ac
+++ b/openbsc/configure.ac
@@ -39,19 +39,19 @@
 AC_SUBST(LIBRARY_DL)
 
 
-PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 0.9.5)
-PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 0.3.0)
-PKG_CHECK_MODULES(LIBOSMOCTRL, libosmoctrl)
-PKG_CHECK_MODULES(LIBOSMOGSM, libosmogsm >= 0.9.5)
-PKG_CHECK_MODULES(LIBOSMOABIS, libosmoabis >= 0.2.0)
-PKG_CHECK_MODULES(LIBOSMOGB, libosmogb >= 0.6.4)
-PKG_CHECK_MODULES(LIBOSMONETIF, libosmo-netif >= 0.0.1)
+PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 0.11.0)
+PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 0.11.0)
+PKG_CHECK_MODULES(LIBOSMOCTRL, libosmoctrl >= 0.11.0)
+PKG_CHECK_MODULES(LIBOSMOGSM, libosmogsm >= 0.11.0)
+PKG_CHECK_MODULES(LIBOSMOGB, libosmogb >= 0.11.0)
+PKG_CHECK_MODULES(LIBOSMOABIS, libosmoabis >= 0.5.0)
+PKG_CHECK_MODULES(LIBOSMONETIF, libosmo-netif >= 0.2.0)
 
 # Enabke/disable the NAT?
 AC_ARG_ENABLE([nat], [AS_HELP_STRING([--enable-nat], [Build the BSC NAT. Requires SCCP])],
     [osmo_ac_build_nat="$enableval"],[osmo_ac_build_nat="no"])
 if test "$osmo_ac_build_nat" = "yes" ; then
-        PKG_CHECK_MODULES(LIBOSMOSCCP, libosmo-sccp >= 0.0.2)
+        PKG_CHECK_MODULES(LIBOSMOSCCP, libosmo-sccp >= 0.9.0)
 fi
 AM_CONDITIONAL(BUILD_NAT, test "x$osmo_ac_build_nat" = "xyes")
 AC_SUBST(osmo_ac_build_nat)
@@ -60,7 +60,7 @@
 AC_ARG_ENABLE([osmo-bsc], [AS_HELP_STRING([--enable-osmo-bsc], [Build the Osmo BSC])],
     [osmo_ac_build_bsc="$enableval"],[osmo_ac_build_bsc="no"])
 if test "$osmo_ac_build_bsc" = "yes" ; then
-    PKG_CHECK_MODULES(LIBOSMOSCCP, libosmo-sccp >= 0.0.6)
+    PKG_CHECK_MODULES(LIBOSMOSCCP, libosmo-sccp >= 0.9.0)
 fi
 AM_CONDITIONAL(BUILD_BSC, test "x$osmo_ac_build_bsc" = "xyes")
 AC_SUBST(osmo_ac_build_bsc)
@@ -69,7 +69,7 @@
 AC_ARG_ENABLE([smpp], [AS_HELP_STRING([--enable-smpp], [Build the SMPP interface])],
     [osmo_ac_build_smpp="$enableval"],[osmo_ac_build_smpp="no"])
 if test "$osmo_ac_build_smpp" = "yes" ; then
-    PKG_CHECK_MODULES(LIBSMPP34, libsmpp34 >= 1.12)
+    PKG_CHECK_MODULES(LIBSMPP34, libsmpp34 >= 1.13.0)
     AC_DEFINE(BUILD_SMPP, 1, [Define if we want to build SMPP])
 fi
 AM_CONDITIONAL(BUILD_SMPP, test "x$osmo_ac_build_smpp" = "xyes")
@@ -95,9 +95,9 @@
 AC_ARG_ENABLE([iu], [AS_HELP_STRING([--enable-iu], [Build 3G support, aka IuPS and IuCS interfaces])],
     [osmo_ac_iu="$enableval"],[osmo_ac_iu="no"])
 if test "x$osmo_ac_iu" = "xyes" ; then
-    PKG_CHECK_MODULES(LIBASN1C, libasn1c) # TODO version?
-    PKG_CHECK_MODULES(LIBOSMORANAP, libosmo-ranap) # TODO version?
-    PKG_CHECK_MODULES(LIBOSMOSIGTRAN, libosmo-sigtran) # TODO version?
+    PKG_CHECK_MODULES(LIBASN1C, libasn1c >= 0.9.31)
+    PKG_CHECK_MODULES(LIBOSMORANAP, libosmo-ranap >= 0.3.0)
+    PKG_CHECK_MODULES(LIBOSMOSIGTRAN, libosmo-sigtran >= 0.9.0)
     AC_DEFINE(BUILD_IU, 1, [Define if we want to build IuPS and IuCS interfaces support])
 fi
 AM_CONDITIONAL(BUILD_IU, test "x$osmo_ac_iu" = "xyes")

-- 
To view, visit https://gerrit.osmocom.org/8026
To unsubscribe, visit https://gerrit.osmocom.org/settings

Gerrit-MessageType: merged
Gerrit-Change-Id: I04ccac3ce79b58d5ef0b3c0503ef38708dac05ff
Gerrit-PatchSet: 1
Gerrit-Project: openbsc
Gerrit-Branch: master
Gerrit-Owner: Pau Espin Pedrol <pespin at sysmocom.de>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Jenkins Builder



More information about the gerrit-log mailing list