This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Pau Espin Pedrol gerrit-no-reply at lists.osmocom.orgHello Harald Welte, Jenkins Builder,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/7985
to look at the new patch set (#2).
Bump version: 0.3.0-dirty → 0.4.0
Change-Id: Ifc469bce89d52012e1f876c847b4535360a602ad
---
M configure.ac
M debian/changelog
2 files changed, 125 insertions(+), 3 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-trx refs/changes/85/7985/2
diff --git a/configure.ac b/configure.ac
index 2b2dab7..5f66225 100644
--- a/configure.ac
+++ b/configure.ac
@@ -74,9 +74,9 @@
AC_HEADER_TIME
AC_C_BIGENDIAN
-PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 0.10.0)
-PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 0.3.0)
-PKG_CHECK_MODULES(LIBOSMOCTRL, libosmoctrl >= 0.10.0)
+PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 0.11.0)
+PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 0.11.0)
+PKG_CHECK_MODULES(LIBOSMOCTRL, libosmoctrl >= 0.11.0)
AC_ARG_ENABLE(sanitize,
[AS_HELP_STRING(
diff --git a/debian/changelog b/debian/changelog
index ec65036..a9724d8 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,125 @@
+osmo-trx (0.4.0) unstable; urgency=medium
+
+ [ Neels Hofmeyr ]
+ * jenkins: use osmo-clean-workspace.sh before and after build
+
+ [ Harald Welte ]
+ * SocketsTest: Fix printing of non-nul-terminated string
+ * Revert "debian: Remove osmo-trx-usrp1 until we can build libusrp1.deb"
+ * debian/control: Remove "Maintainer" from binary package section
+ * debian/rules: Make sure we always require libusrp
+ * debian: Ensure USRP1 firmware is part of osmo-trx-usrp1
+ * debian/control: Add build dependency to libusrp-dev
+ * update .gitignore for new executable names
+ * osmo-trx: s/GSM Core Address/GSM BTS Address/
+
+ [ Piotr Krysik ]
+ * UHDDevice.cpp: add USRP B205mini support
+
+ [ Max ]
+ * Mark release target as virtual
+ * Remove outdated references to OpenBTS
+ * Remove unused headers
+ * Update installation instructions
+ * Update legal disclaimer
+ * Update license notes
+ * tests: null-terminate buffer
+
+ [ Pau Espin Pedrol ]
+ * cosmetic: Remove trailing whitespace
+ * Logger: Stop using Log.Alarms.Max from config
+ * Logger: Stop using Log.File and Log.Level from config
+ * Drop use of ConfigurationTable gConfig
+ * Remove Configuration module and libsqlite dependency
+ * cosmetic: AUTHORS: fix trailing whitespace
+ * Set up GNU Autotest infrastructure
+ * tests: InterThread: adapt to have reproducible output and enable autotest
+ * tests: Timeval: adapt to have reproducible output and enable autotest
+ * tests: Log: adapt to have reproducible output and enable autotest
+ * Sockets.cpp: Fix initialization of UDD socket
+ * tests: Sockets: adapt to have reproducible output and enable autotest
+ * utils/convolvtest: Remove uneeded libosmocore dependency
+ * Move ARCH_LA to Makefile.common
+ * tests: Migrate convtest util to autotest infrastructure
+ * arm/convert.c: Fix compilation error
+ * arm/convert.c: Add missing convert_init implementation
+ * .gitignore: Add missing test related files
+ * Remove UDDSocket class
+ * tests: SocketTests: Pick OS-assigned instead of setting one manually
+ * tests: SocketsTest: Avoid hang forever if test fails
+ * tests: SocketsTest: Fail test on write fail
+ * tests: TimevalTest: refactor and avoid double comparison
+ * contrib/jenkins.sh: Use qemu+proot+debootstrap to run tests with ARM instruction set
+ * tests: convolve: Disable due to difference in output in different archs
+ * Remove unneeded libdl dependency
+ * Fix whitespace
+ * Add support to set Rx/TxAntenna
+ * UHDDevice: Initialize async_event_thrd in constructor
+ * Logger: Drop unused gLogEarly
+ * Logger: Remove unused logging macros
+ * Logger: get rid of alarm APIs
+ * Logger: Drop syslog support
+ * Logger: Drop support to log into file
+ * Logger: Remove unused includes
+ * Logger: Remove gLogToConsole flag
+ * configure.ac: Check for pkg-config
+ * Depend on libosmocore
+ * osmo-trx: set up signals using libosmocore helpers
+ * osmo-trx: Set up talloc ctx
+ * debian: Depend on libtalloc and libosmocore
+ * Add initial support for logging, vty, ctrl
+ * Logger: Use libosmocore logging system
+ * osmo-trx.cpp: Move trx start and stop to helper functions
+ * Move enums required by VTY to a separate header
+ * vty: Implement VTY cfg parsing for current parameters
+ * doc: Add sample cfg file for LimeSDR
+ * osmo-trx: Use VTY cfg structures while still allowing cmd line options
+ * osmo-trx: Re-introduce -l cmd line parameter
+ * Makefile.am: Avoid using subdir if arch is not required
+ * Build Transceiver52M/common as an .la lib
+ * use osmo_init_logging2()
+ * tests: Makefile.am: Fix typo in include path
+ * configure.ac: Add --enable-sanitize option
+ * Move arch specific fiels to arch subdir
+ * Move device specific files to device subdir
+ * Change configure define USRP1 to DEVICE_USRP1
+ * Move device specific code out of radioInterface
+ * Transceiver: Move device specific code to radioDevice class
+ * Build one osmo-trx binary for each device support enabled
+ * Logger: Print correct source file and line number
+ * Transceiver: log timing info of stale bursts
+ * build: Fix make distcheck
+ * build: More OBS build failure fixes
+ * jenkins.sh: Enable build of osmo-trx-usrp1
+ * debian: Remove osmo-trx-usrp1 until we can build libusrp1.deb
+ * debian: Fix OBS build
+ * build: Fix OBS build for ARM
+ * git-version-gen: Take into account tags not in master
+
+ [ Alexander Huemer ]
+ * Unbreak `./configure --with-usrp1` build
+ * Fix USRP1 build with support for setting Rx/TxAntenna
+
+ [ Alexander Couzens ]
+ * jenkins.sh: fix the download url if the qemu image wasn't setup
+ * jenkins.sh: cleanup always the workspace
+ * jenkins.sh: change qemu-img default location to $HOME/qemu-img instead of /opt/qemu-img
+
+ [ Vadim Yanitskiy ]
+ * Transceiver.cpp: use a define for the MAX_PACKET_LENGTH
+ * Transceiver.cpp: properly zero-terminate received commands
+ * Transceiver.cpp: use pointer arithmetics for CMD parsing
+ * Transceiver.cpp: fix incorrect format string for SETTSC
+ * Transceiver.cpp: prevent out-of-range array access
+
+ [ Martin Hauke ]
+ * configure.ac: Fix typo
+
+ [ Philipp Maier ]
+ * doc: add example config for usrp B200 series
+
+ -- Pau Espin Pedrol <pespin at sysmocom.de> Thu, 03 May 2018 16:23:29 +0200
+
osmo-trx (0.2.0) unstable; urgency=medium
[ Alexander Chemeris ]
--
To view, visit https://gerrit.osmocom.org/7985
To unsubscribe, visit https://gerrit.osmocom.org/settings
Gerrit-MessageType: newpatchset
Gerrit-Change-Id: Ifc469bce89d52012e1f876c847b4535360a602ad
Gerrit-PatchSet: 2
Gerrit-Project: osmo-trx
Gerrit-Branch: master
Gerrit-Owner: Pau Espin Pedrol <pespin at sysmocom.de>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Jenkins Builder