This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Neels Hofmeyr gerrit-no-reply at lists.osmocom.orgNeels Hofmeyr has uploaded this change for review. ( https://gerrit.osmocom.org/10101 Change subject: cosmetic: FSMs: allow ignorable events ...................................................................... cosmetic: FSMs: allow ignorable events In various FSMs, some events may appear later or earlier without need of action. Do not indicate these as 'ERROR' (event not permitted), but allow and ignore them. Debug-log about some of those. >From the old code, we've taken over the habit to change into WAIT_BEFORE_RF_RELEASE even before SAPI[0] is released. Hence we may still receive a SAPI[0] REL_IND in WAIT_BEFORE_RF_RELEASE. Don't show this as error message, just silently accept it. Change-Id: Ie320c7c6a1436184aaf2ec5a1843e04f4b3414ab --- M src/osmo-bsc/assignment_fsm.c M src/osmo-bsc/handover_fsm.c M src/osmo-bsc/lchan_fsm.c 3 files changed, 60 insertions(+), 6 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/01/10101/1 diff --git a/src/osmo-bsc/assignment_fsm.c b/src/osmo-bsc/assignment_fsm.c index 61757ba..618a83d 100644 --- a/src/osmo-bsc/assignment_fsm.c +++ b/src/osmo-bsc/assignment_fsm.c @@ -433,8 +433,9 @@ return; case ASSIGNMENT_EV_LCHAN_ESTABLISHED: - /* The lchan is already done with all of its RTP setup. We will notice the lchan state to - * be established in assignment_fsm_wait_lchan_established_onenter(). */ + LOG_ASSIGNMENT(conn, LOGL_DEBUG, "lchan established, still waiting for RR Assignment Complete\n"); + /* The lchan is already done with all of its RTP setup. We will notice the lchan state + * being LCHAN_ST_ESTABLISHED in assignment_fsm_wait_lchan_established_onenter(). */ return; case ASSIGNMENT_EV_RR_ASSIGNMENT_FAIL: @@ -453,8 +454,10 @@ { struct gsm_subscriber_connection *conn = assignment_fi_conn(fi); /* Do we still need to wait for the RTP stream at all? */ - if (lchan_state_is(conn->assignment.new_lchan, LCHAN_ST_ESTABLISHED)) + if (lchan_state_is(conn->assignment.new_lchan, LCHAN_ST_ESTABLISHED)) { + LOG_ASSIGNMENT(conn, LOGL_DEBUG, "lchan fully established, no need to wait"); assignment_fsm_post_lchan_established(fi); + } } static void assignment_fsm_wait_lchan_established(struct osmo_fsm_inst *fi, uint32_t event, void *data) @@ -558,6 +561,7 @@ .in_event_mask = 0 | S(ASSIGNMENT_EV_RR_ASSIGNMENT_COMPLETE) | S(ASSIGNMENT_EV_RR_ASSIGNMENT_FAIL) + | S(ASSIGNMENT_EV_LCHAN_ESTABLISHED) , .out_state_mask = 0 | S(ASSIGNMENT_ST_WAIT_LCHAN_ESTABLISHED) diff --git a/src/osmo-bsc/handover_fsm.c b/src/osmo-bsc/handover_fsm.c index 1be4214..e3f64cd 100644 --- a/src/osmo-bsc/handover_fsm.c +++ b/src/osmo-bsc/handover_fsm.c @@ -872,6 +872,16 @@ switch (event) { + case HO_EV_RR_HO_DETECT: + /* Numerous HO Detect RACH bursts may follow after the initial one, ignore. */ + return; + + case HO_EV_LCHAN_ESTABLISHED: + LOG_HO(conn, LOGL_DEBUG, "lchan established, still waiting for RR Handover Complete\n"); + /* The lchan is already done with all of its RTP setup. We will notice the lchan state + * being LCHAN_ST_ESTABLISHED in ho_fsm_wait_lchan_established_onenter(). */ + return; + case HO_EV_RR_HO_COMPLETE: ho_fsm_state_chg(HO_ST_WAIT_LCHAN_ESTABLISHED); return; @@ -891,8 +901,10 @@ { struct gsm_subscriber_connection *conn = ho_fi_conn(fi); - if (conn->ho.fi && lchan_state_is(conn->ho.new_lchan, LCHAN_ST_ESTABLISHED)) + if (conn->ho.fi && lchan_state_is(conn->ho.new_lchan, LCHAN_ST_ESTABLISHED)) { + LOG_HO(conn, LOGL_DEBUG, "lchan already established earlier\n"); ho_fsm_post_lchan_established(fi); + } } static void ho_fsm_wait_lchan_established(struct osmo_fsm_inst *fi, uint32_t event, void *data) @@ -1068,6 +1080,8 @@ .name = "WAIT_RR_HO_COMPLETE", .action = ho_fsm_wait_rr_ho_complete, .in_event_mask = 0 + | S(HO_EV_RR_HO_DETECT) /* ignore extra HO RACH */ + | S(HO_EV_LCHAN_ESTABLISHED) | S(HO_EV_RR_HO_COMPLETE) | S(HO_EV_RR_HO_FAIL) , diff --git a/src/osmo-bsc/lchan_fsm.c b/src/osmo-bsc/lchan_fsm.c index 3c616dd..f25e7b9 100644 --- a/src/osmo-bsc/lchan_fsm.c +++ b/src/osmo-bsc/lchan_fsm.c @@ -755,7 +755,11 @@ case LCHAN_EV_MGW_ENDPOINT_AVAILABLE: lchan->activate.mgw_endpoint_available = true; lchan_fsm_tch_post_endpoint_available(fi); - break; + return; + + case LCHAN_EV_RLL_ESTABLISH_IND: + /* abis_rsl.c has noticed that a SAPI was established, no need to take action here. */ + return; default: OSMO_ASSERT(false); @@ -828,6 +832,10 @@ lchan_fail("Received NACK on IPACC CRCX"); return; + case LCHAN_EV_RLL_ESTABLISH_IND: + /* abis_rsl.c has noticed that a SAPI was established, no need to take action here. */ + return; + default: OSMO_ASSERT(false); } @@ -879,6 +887,10 @@ lchan_fail("Received NACK on IPACC MDCX"); return; + case LCHAN_EV_RLL_ESTABLISH_IND: + /* abis_rsl.c has noticed that a SAPI was established, no need to take action here. */ + return; + default: OSMO_ASSERT(false); } @@ -946,6 +958,10 @@ lchan_fail("Error while redirecting the MGW to the BTS' RTP port"); return; + case LCHAN_EV_RLL_ESTABLISH_IND: + /* abis_rsl.c has noticed that a SAPI was established, no need to take action here. */ + return; + default: OSMO_ASSERT(false); } @@ -1033,7 +1049,19 @@ static void lchan_fsm_established(struct osmo_fsm_inst *fi, uint32_t event, void *data) { - handle_rll_rel_ind_or_conf(fi, event, data, true); + switch (event) { + case LCHAN_EV_RLL_ESTABLISH_IND: + /* abis_rsl.c has noticed that a SAPI was established, no need to take action here. */ + return; + + case LCHAN_EV_RLL_REL_IND: + case LCHAN_EV_RLL_REL_CONF: + handle_rll_rel_ind_or_conf(fi, event, data, true); + return; + + default: + OSMO_ASSERT(false); + } } static bool should_sacch_deact(struct gsm_lchan *lchan) @@ -1236,6 +1264,7 @@ .action = lchan_fsm_wait_mgw_endpoint_available, .in_event_mask = 0 | S(LCHAN_EV_MGW_ENDPOINT_AVAILABLE) + | S(LCHAN_EV_RLL_ESTABLISH_IND) /* ignored */ , .out_state_mask = 0 | S(LCHAN_ST_UNUSED) @@ -1252,6 +1281,7 @@ .in_event_mask = 0 | S(LCHAN_EV_IPACC_CRCX_ACK) | S(LCHAN_EV_IPACC_CRCX_NACK) + | S(LCHAN_EV_RLL_ESTABLISH_IND) /* ignored */ , .out_state_mask = 0 | S(LCHAN_ST_UNUSED) @@ -1267,6 +1297,7 @@ .in_event_mask = 0 | S(LCHAN_EV_IPACC_MDCX_ACK) | S(LCHAN_EV_IPACC_MDCX_NACK) + | S(LCHAN_EV_RLL_ESTABLISH_IND) /* ignored */ , .out_state_mask = 0 | S(LCHAN_ST_UNUSED) @@ -1281,6 +1312,7 @@ .action = lchan_fsm_wait_mgw_endpoint_configured, .in_event_mask = 0 | S(LCHAN_EV_MGW_ENDPOINT_CONFIGURED) + | S(LCHAN_EV_RLL_ESTABLISH_IND) /* ignored */ , .out_state_mask = 0 | S(LCHAN_ST_UNUSED) @@ -1296,6 +1328,7 @@ .in_event_mask = 0 | S(LCHAN_EV_RLL_REL_IND) | S(LCHAN_EV_RLL_REL_CONF) + | S(LCHAN_EV_RLL_ESTABLISH_IND) /* ignored */ , .out_state_mask = 0 | S(LCHAN_ST_UNUSED) @@ -1320,6 +1353,9 @@ }, [LCHAN_ST_WAIT_BEFORE_RF_RELEASE] = { .name = "WAIT_BEFORE_RF_RELEASE", + .in_event_mask = 0 + | S(LCHAN_EV_RLL_REL_IND) /* allow late REL_IND of SAPI[0] */ + , .out_state_mask = 0 | S(LCHAN_ST_UNUSED) | S(LCHAN_ST_WAIT_RF_RELEASE_ACK) -- To view, visit https://gerrit.osmocom.org/10101 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-MessageType: newchange Gerrit-Change-Id: Ie320c7c6a1436184aaf2ec5a1843e04f4b3414ab Gerrit-Change-Number: 10101 Gerrit-PatchSet: 1 Gerrit-Owner: Neels Hofmeyr <nhofmeyr at sysmocom.de> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20180723/9d2fce80/attachment.htm>