This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has submitted this change and it was merged. ( https://gerrit.osmocom.org/10057 ) Change subject: ho cfg: fix unit strings ...................................................................... ho cfg: fix unit strings Change-Id: Ie98a68de207aea69befd24af3f302b6ef9e6f8e4 --- M include/osmocom/bsc/handover_cfg.h M tests/handover_cfg.vty 2 files changed, 21 insertions(+), 21 deletions(-) Approvals: Harald Welte: Looks good to me, approved Jenkins Builder: Verified diff --git a/include/osmocom/bsc/handover_cfg.h b/include/osmocom/bsc/handover_cfg.h index 2321fcf..865fab9 100644 --- a/include/osmocom/bsc/handover_cfg.h +++ b/include/osmocom/bsc/handover_cfg.h @@ -126,8 +126,8 @@ "handover1 ", "power budget hysteresis", "<0-999>", atoi, "%u", as_is, \ HO_CFG_STR_HANDOVER1 \ HO_CFG_STR_POWER_BUDGET \ - "How many dBm stronger must a neighbor be to become a HO candidate\n" \ - "Neighbor's strength difference in dBm\n") \ + "How many dB stronger must a neighbor be to become a HO candidate\n" \ + "Neighbor's strength difference in dB\n") \ \ HO_CFG_ONE_MEMBER(unsigned int, hodec1_max_distance, 9999, \ "handover1 ", "maximum distance" , "<0-9999>", atoi, "%u", as_is, \ @@ -172,8 +172,8 @@ "handover2 ", "power budget hysteresis", "<0-999>", atoi, "%u", as_is, \ HO_CFG_STR_HANDOVER2 \ HO_CFG_STR_POWER_BUDGET \ - "How many dBm stronger must a neighbor be to become a HO candidate\n" \ - "Neighbor's strength difference in dBm\n") \ + "How many dB stronger must a neighbor be to become a HO candidate\n" \ + "Neighbor's strength difference in dB\n") \ \ HO_CFG_ONE_MEMBER(unsigned int, hodec2_max_distance, 9999, \ "handover2 ", "maximum distance" , "<0-9999>", atoi, "%u", as_is, \ @@ -208,21 +208,21 @@ HO_CFG_STR_HANDOVER2 \ HO_CFG_STR_MIN \ "How bad may RxQual of an MS become before triggering HO\n" \ - "minimum RxQual (dBm)\n") \ + "minimum RxQual\n") \ \ HO_CFG_ONE_MEMBER(int, hodec2_afs_bias_rxlev, 0, \ "handover2 ", "afs-bias rxlev", "<0-20>", atoi, "%d", as_is, \ HO_CFG_STR_HANDOVER2 \ HO_CFG_STR_AFS_BIAS \ "RxLev improvement bias for AFS over other codecs\n" \ - "Virtual RxLev improvement (dBm)\n") \ + "Virtual RxLev improvement (dB)\n") \ \ HO_CFG_ONE_MEMBER(int, hodec2_afs_bias_rxqual, 0, \ "handover2 ", "afs-bias rxqual", "<0-7>", atoi, "%d", as_is, \ HO_CFG_STR_HANDOVER2 \ HO_CFG_STR_AFS_BIAS \ "RxQual improvement bias for AFS over other codecs\n" \ - "Virtual RxQual improvement (dBm)\n") \ + "Virtual RxQual improvement\n") \ \ HO_CFG_ONE_MEMBER(int, hodec2_tchf_min_slots, 0, \ "handover2 ", "min-free-slots tch/f", "<0-9999>", atoi, "%d", as_is, \ diff --git a/tests/handover_cfg.vty b/tests/handover_cfg.vty index 3ad44d8..119eaf5 100644 --- a/tests/handover_cfg.vty +++ b/tests/handover_cfg.vty @@ -264,14 +264,14 @@ OsmoBSC(config-net)# handover1 power budget ? interval How often to check for a better cell (SACCH frames) - hysteresis How many dBm stronger must a neighbor be to become a HO candidate + hysteresis How many dB stronger must a neighbor be to become a HO candidate OsmoBSC(config-net)# handover1 power budget interval ? <1-99> Check for stronger neighbor every N number of SACCH frames default Use default (6), remove explicit setting on this node OsmoBSC(config-net)# handover1 power budget hysteresis ? - <0-999> Neighbor's strength difference in dBm + <0-999> Neighbor's strength difference in dB default Use default (3), remove explicit setting on this node OsmoBSC(config-net)# handover1 maximum ? @@ -312,14 +312,14 @@ OsmoBSC(config-net)# handover2 power budget ? interval How often to check for a better cell (SACCH frames) - hysteresis How many dBm stronger must a neighbor be to become a HO candidate + hysteresis How many dB stronger must a neighbor be to become a HO candidate OsmoBSC(config-net)# handover2 power budget interval ? <1-99> Check for stronger neighbor every N number of SACCH frames default Use default (6), remove explicit setting on this node OsmoBSC(config-net)# handover2 power budget hysteresis ? - <0-999> Neighbor's strength difference in dBm + <0-999> Neighbor's strength difference in dB default Use default (3), remove explicit setting on this node OsmoBSC(config-net)# handover2 maximum ? @@ -348,7 +348,7 @@ default Use default (-100), remove explicit setting on this node OsmoBSC(config-net)# handover2 min rxqual ? - <0-7> minimum RxQual (dBm) + <0-7> minimum RxQual default Use default (5), remove explicit setting on this node OsmoBSC(config-net)# handover2 afs-bias ? @@ -356,11 +356,11 @@ rxqual RxQual improvement bias for AFS over other codecs OsmoBSC(config-net)# handover2 afs-bias rxlev ? - <0-20> Virtual RxLev improvement (dBm) + <0-20> Virtual RxLev improvement (dB) default Use default (0), remove explicit setting on this node OsmoBSC(config-net)# handover2 afs-bias rxqual ? - <0-7> Virtual RxQual improvement (dBm) + <0-7> Virtual RxQual improvement default Use default (0), remove explicit setting on this node OsmoBSC(config-net)# handover2 min-free-slots ? @@ -482,14 +482,14 @@ OsmoBSC(config-net-bts)# handover1 power budget ? interval How often to check for a better cell (SACCH frames) - hysteresis How many dBm stronger must a neighbor be to become a HO candidate + hysteresis How many dB stronger must a neighbor be to become a HO candidate OsmoBSC(config-net-bts)# handover1 power budget interval ? <1-99> Check for stronger neighbor every N number of SACCH frames default Use default (6), remove explicit setting on this node OsmoBSC(config-net-bts)# handover1 power budget hysteresis ? - <0-999> Neighbor's strength difference in dBm + <0-999> Neighbor's strength difference in dB default Use default (3), remove explicit setting on this node OsmoBSC(config-net-bts)# handover1 maximum ? @@ -530,14 +530,14 @@ OsmoBSC(config-net-bts)# handover2 power budget ? interval How often to check for a better cell (SACCH frames) - hysteresis How many dBm stronger must a neighbor be to become a HO candidate + hysteresis How many dB stronger must a neighbor be to become a HO candidate OsmoBSC(config-net-bts)# handover2 power budget interval ? <1-99> Check for stronger neighbor every N number of SACCH frames default Use default (6), remove explicit setting on this node OsmoBSC(config-net-bts)# handover2 power budget hysteresis ? - <0-999> Neighbor's strength difference in dBm + <0-999> Neighbor's strength difference in dB default Use default (3), remove explicit setting on this node OsmoBSC(config-net-bts)# handover2 maximum ? @@ -566,7 +566,7 @@ default Use default (-100), remove explicit setting on this node OsmoBSC(config-net-bts)# handover2 min rxqual ? - <0-7> minimum RxQual (dBm) + <0-7> minimum RxQual default Use default (5), remove explicit setting on this node OsmoBSC(config-net-bts)# handover2 afs-bias ? @@ -574,11 +574,11 @@ rxqual RxQual improvement bias for AFS over other codecs OsmoBSC(config-net-bts)# handover2 afs-bias rxlev ? - <0-20> Virtual RxLev improvement (dBm) + <0-20> Virtual RxLev improvement (dB) default Use default (0), remove explicit setting on this node OsmoBSC(config-net-bts)# handover2 afs-bias rxqual ? - <0-7> Virtual RxQual improvement (dBm) + <0-7> Virtual RxQual improvement default Use default (0), remove explicit setting on this node OsmoBSC(config-net-bts)# handover2 min-free-slots ? -- To view, visit https://gerrit.osmocom.org/10057 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-MessageType: merged Gerrit-Change-Id: Ie98a68de207aea69befd24af3f302b6ef9e6f8e4 Gerrit-Change-Number: 10057 Gerrit-PatchSet: 2 Gerrit-Owner: Neels Hofmeyr <nhofmeyr at sysmocom.de> Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Jenkins Builder -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20180721/d7adef3e/attachment.htm>