This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgReview at https://gerrit.osmocom.org/5927 README.md: Remove misleading sentence on sgsnemu As reported by Viktor Tsymbalyuk, "Use the same LAN switch as the one your SGSN is connected to." is of course completely bogus. As long as you have IP routing in place, it doesn't matter at all which switch you are using. Change-Id: I748752337b863b317d2899017b1dc255ced2515d --- M README.md 1 file changed, 1 insertion(+), 2 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ggsn refs/changes/27/5927/1 diff --git a/README.md b/README.md index 80126e0..583ad3a 100644 --- a/README.md +++ b/README.md @@ -263,8 +263,7 @@ 1. Install sgsnemu on a Linux Box. See under installation above. 2. Connect your Linux box with sgsnemu installed to the GPRS core -network. Use the same LAN switch as the one your SGSN is connected -to. You also need a free IP address that can be used by sgsnemu. +network. You also need a free IP address that can be used by sgsnemu. 3. You need to configure networking in terms of interface address, subnet mask and default route. See the Linux Networking HOWTO for details. -- To view, visit https://gerrit.osmocom.org/5927 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I748752337b863b317d2899017b1dc255ced2515d Gerrit-PatchSet: 1 Gerrit-Project: osmo-ggsn Gerrit-Branch: master Gerrit-Owner: Harald Welte <laforge at gnumonks.org>