Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #4593

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

jenkins at lists.osmocom.org jenkins at lists.osmocom.org
Sat Dec 22 00:11:12 UTC 2018


See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=default,a3=default,a4=default,label=osmocom-master-debian9/4593/display/redirect>

------------------------------------------
[...truncated 889.30 KB...]
  early-classmark-sending forbidden
  early-classmark-sending-3g allowed
  ip.access unit_id 1800 0
  oml ip.access stream_id 255 line 0
  neighbor-list mode automatic
  codec-support fr hr efr amr
  amr tch-f modes 1 2 6 7
  amr tch-f threshold ms 32 32 32
  amr tch-f hysteresis ms 8 8 8
  amr tch-f threshold bts 32 32 32
  amr tch-f hysteresis bts 8 8 8
  amr tch-f start-mode auto
  amr tch-h modes 1 2 4 5
  amr tch-h threshold ms 32 32 32
  amr tch-h hysteresis ms 8 8 8
  amr tch-h threshold bts 32 32 32
  amr tch-h hysteresis bts 8 8 8
  amr tch-h start-mode auto
  gprs mode none
  trx 0
   rf_locked 0
   arfcn 868
   nominal power 23
   max_power_red 0
   rsl e1 tei 0
   timeslot 0
    phys_chan_config CCCH+SDCCH4
    hopping enabled 0
   timeslot 1
    phys_chan_config SDCCH8
    hopping enabled 0
   timeslot 2
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 3
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 4
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 5
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 6
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 7
    phys_chan_config TCH/F
    hopping enabled 0
msc 0
 ip.access rtp-base 4000
 no bsc-welcome-text
 no bsc-msc-lost-text
 no bsc-grace-text
 codec-list hr3
 type normal
 allow-emergency deny
 amr-config 12_2k forbidden
 amr-config 10_2k forbidden
 amr-config 7_95k forbidden
 amr-config 7_40k forbidden
 amr-config 6_70k forbidden
 amr-config 5_90k allowed
 amr-config 5_15k forbidden
 amr-config 4_75k forbidden
 asp-protocol m3ua
 lcls-mode disabled
 lcls-codec-mismatch forbidden
bsc
 mid-call-timeout 0
 no missing-msc-text
end
<0004> bsc_init.c:49 shutting down OML for BTS 0
logging level cc (debug|info|notice|error|fatal)
logging level mgcp (debug|info|notice|error|fatal)
signal 15 received
Terminating took 2.679s

RESULTS:
pass: ./handover_cfg.vty
pass: ./neighbor_ident.vty
pass: ./osmo-bsc.vty

make[6]: Leaving directory '/build/tests'
osmotestvty.py -p /build -w /build -v
test_history (__main__.TestVTY) ... confpath /build, workdir /build
Running tests for specific VTY commands
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Opening /dev/null
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'

> ls -l /proc/1271/fd
total 0
lr-x------ 1 build build 64 Dec 22 00:11 0 -> pipe:[2157794962]
l-wx------ 1 build build 64 Dec 22 00:11 1 -> pipe:[2157794963]
lr-x------ 1 build build 64 Dec 22 00:11 11 -> /dev/urandom
l-wx------ 1 build build 64 Dec 22 00:11 2 -> pipe:[2157794964]
l-wx------ 1 build build 64 Dec 22 00:11 3 -> /dev/null


> ss -tn
State      Recv-Q Send-Q        Local Address:Port          Peer Address:Port 


> ss -tln
State      Recv-Q Send-Q        Local Address:Port          Peer Address:Port 


> ps xua | grep osmo
build     1271  0.0  0.0  39460 14168 ?        S    00:10   0:00 /usr/bin/python2 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build     1272  0.0  0.0 21474965716 15968 ?   R    00:10   0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build     1279  0.0  0.0   4336   760 ?        S    00:10   0:00 /bin/sh -c ps xua | grep osmo
build     1281  0.0  0.0  11128  1036 ?        S    00:10   0:00 grep osmo

ERROR
test_terminal_length (__main__.TestVTY) ... Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Socket: closing 127.0.0.1:4242 <socket._socketobject object at 0x7f7a405ee440> (0 sockets open)
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'

> ls -l /proc/1271/fd
total 0
lr-x------ 1 build build 64 Dec 22 00:11 0 -> pipe:[2157794962]
l-wx------ 1 build build 64 Dec 22 00:11 1 -> pipe:[2157794963]
lr-x------ 1 build build 64 Dec 22 00:11 11 -> /dev/urandom
l-wx------ 1 build build 64 Dec 22 00:11 2 -> pipe:[2157794964]
l-wx------ 1 build build 64 Dec 22 00:11 3 -> /dev/null


> ss -tn
State      Recv-Q Send-Q        Local Address:Port          Peer Address:Port 


> ss -tln
State      Recv-Q Send-Q        Local Address:Port          Peer Address:Port 


> ps xua | grep osmo
build     1271  1.0  0.0  39460 14304 ?        S    00:10   0:00 /usr/bin/python2 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build     1282  0.0  0.0 21474965716 18100 ?   R    00:11   0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build     1289  0.0  0.0   4336   816 ?        S    00:11   0:00 /bin/sh -c ps xua | grep osmo
build     1291  0.0  0.0  11128   952 ?        S    00:11   0:00 grep osmo

ok
test_unknown_command (__main__.TestVTY) ... Connecting socket failed, retrying...
Connecting socket failed, retrying...
Socket: in 3 tries, connected to 127.0.0.1:4242 <socket._socketobject object at 0x7f7a405ee440> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket._socketobject object at 0x7f7a405ee440> (0 sockets open)
Terminating took 2.679s
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'

> ls -l /proc/1271/fd
total 0
lr-x------ 1 build build 64 Dec 22 00:11 0 -> pipe:[2157794962]
l-wx------ 1 build build 64 Dec 22 00:11 1 -> pipe:[2157794963]
lr-x------ 1 build build 64 Dec 22 00:11 11 -> /dev/urandom
l-wx------ 1 build build 64 Dec 22 00:11 2 -> pipe:[2157794964]
l-wx------ 1 build build 64 Dec 22 00:11 3 -> /dev/null


> ss -tn
State      Recv-Q Send-Q        Local Address:Port          Peer Address:Port 


> ss -tln
State      Recv-Q Send-Q        Local Address:Port          Peer Address:Port 


> ps xua | grep osmo
build     1271  0.5  0.0  39460 14308 ?        S    00:10   0:00 /usr/bin/python2 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build     1292  0.0  0.0 21474965716 16852 ?   R    00:11   0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build     1299  0.0  0.0   4336   812 ?        S    00:11   0:00 /bin/sh -c ps xua | grep osmo
build     1301  0.0  0.0  11128  1008 ?        S    00:11   0:00 grep osmo

ok

======================================================================
ERROR: test_history (__main__.TestVTY)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/usr/local/lib/python2.7/dist-packages/osmopython-0.1.0-py2.7.egg/EGG-INFO/scripts/osmotestvty.py", line 56, in test_history
    self.vty.command(t1)
  File "/usr/local/lib/python2.7/dist-packages/osmopython-0.1.0-py2.7.egg/osmopy/obscvty.py", line 223, in command
    return self._common_command(request, close)
  File "/usr/local/lib/python2.7/dist-packages/osmopython-0.1.0-py2.7.egg/osmopy/obscvty.py", line 176, in _common_command
    self._connect_socket()
  File "/usr/local/lib/python2.7/dist-packages/osmopython-0.1.0-py2.7.egg/osmopy/obscvty.py", line 83, in _connect_socket
    self.socket.connect((self.host, self.port))
  File "/usr/lib/python2.7/socket.py", line 224, in meth
    return getattr(self._sock,name)(*args)
error: [Errno 111] Connection refused

----------------------------------------------------------------------
Ran 3 tests in 10.236s

FAILED (errors=1)
Connecting socket failed, retrying...
Socket: in 2 tries, connected to 127.0.0.1:4242 <socket._socketobject object at 0x7f7a4059bec0> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket._socketobject object at 0x7f7a4059bec0> (0 sockets open)
Terminating took 2.679s
Makefile:684: recipe for target 'python-tests' failed
make[5]: Leaving directory '/build/tests'
make[5]: *** [python-tests] Error 1
Makefile:703: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 2
Makefile:546: recipe for target 'check-am' failed
make[3]: *** [check-am] Error 2
make[3]: Leaving directory '/build/tests'
Makefile:398: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:435: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
make: *** [check] Error 2
Makefile:726: recipe for target 'check' failed
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE



More information about the gerrit-log mailing list