This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has submitted this change and it was merged. Change subject: ms: Add a first test to use all parts of the system ...................................................................... ms: Add a first test to use all parts of the system This is an interim solution but is bringing all parts together. We will need to: * Abstract this into a base class * Be able to mix different tests without interfering with each other (e.g. 10k LU tests, 2k SMS sending) * The event loop will need to handle multiple timers/timeouts * Stats printing should print more information and test pass/fail * The test should quit early if everything has already passed Change-Id: Id3277ed0f0f9ee734569bedd4752564eb68c9cfd --- A src/osmo_ms_driver/location_update_test.py 1 file changed, 207 insertions(+), 0 deletions(-) Approvals: Pau Espin Pedrol: Looks good to me, approved Jenkins Builder: Verified diff --git a/src/osmo_ms_driver/location_update_test.py b/src/osmo_ms_driver/location_update_test.py new file mode 100644 index 0000000..2d661ca --- /dev/null +++ b/src/osmo_ms_driver/location_update_test.py @@ -0,0 +1,207 @@ +# osmo_ms_driver: Starter for processes +# Help to start processes over time. +# +# Copyright (C) 2018 by Holger Hans Peter Freyther +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as +# published by the Free Software Foundation, either version 3 of the +# License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + + +from osmo_gsm_tester import log +from .starter import OsmoVirtPhy, OsmoMobile + +from datetime import timedelta + +import time + +def imsi_ki_gen(): + """ + Generate IMSIs and KIs to be used by test. + """ + n = 1010000000000 + while True: + yield ("%.15d" % n, "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00") + n += 1 + +class Results(log.Origin): + + def __init__(self, name): + super().__init__(log.C_RUN, name) + self._time_of_registration = None + self._time_of_launch = None + self._time_of_lu = None + + def set_start_time(self, time): + assert self._time_of_registration is None + self._time_of_registration = time + + def set_launch_time(self, time): + assert self._time_of_launch is None + self._time_of_launch = time + + def set_lu_time(self, time): + assert self._time_of_lu is None + self._time_of_lu = time + + def start_time(self): + return self._time_of_registration or 0 + + def launch_time(self): + return self._time_of_launch or 0 + + def lu_time(self): + return self._time_of_lu or 0 + + def lu_delay(self): + return self.lu_time() - self.start_time() + +class MassUpdateLocationTest(log.Origin): + """ + A test to launch a configurable amount of MS and make them + execute a Location Updating Procedure. + + Configure the number of MS to be tested and a function that + decides how quickly to start them and a timeout. + """ + + TEMPLATE_LUA = "osmo-mobile-lu.lua" + TEMPLATE_CFG = "osmo-mobile.cfg" + TEST_TIME = timedelta(seconds=120) + + def __init__(self, name, number_of_ms, cdf_function, event_server, tmp_dir): + super().__init__(log.C_RUN, name) + self._number_of_ms = number_of_ms + self._cdf = cdf_function + self._cdf.set_target(number_of_ms) + self._unstarted = [] + self._phys = [] + self._results = {} + imsi_gen = imsi_ki_gen() + + for i in range(0, number_of_ms): + ms_name = "%.5d" % i + + phy = OsmoVirtPhy(ms_name, tmp_dir) + self._phys.append(phy) + + launcher = OsmoMobile(ms_name, tmp_dir, self.TEMPLATE_LUA, + self.TEMPLATE_CFG, imsi_gen, + phy.phy_filename(), + event_server.server_path()) + self._results[ms_name] = Results(ms_name) + self._unstarted.append(launcher) + self._event_server = event_server + self._event_server.register(self.handle_msg) + + def pre_launch(self, loop): + """ + We need the virtphy's be ready when the lua script in the + mobile comes and kicks-off the test. In lua we don't seem to + be able to just stat/check if a file/socket exists so we need + to do this from here. + """ + self.log("Pre-launching all virtphy's") + for phy in self._phys: + phy.start(loop) + + self.log("Checking if sockets are in the filesystem") + for phy in self._phys: + phy.verify_ready() + + def launch(self, loop): + self.log("Starting testcase") + + self.pre_launch(loop) + + self._start_time = time.clock_gettime(time.CLOCK_MONOTONIC) + self._end_time = self._start_time + \ + self._cdf.duration().total_seconds() + \ + timedelta(seconds=120).total_seconds() + + current_time = self._start_time + step_size = self._cdf.step_size().total_seconds() + self._started = [] + too_slow = 0 + + # Start + self._cdf.step_once() + + while len(self._unstarted) > 0: + # Check for timeout + # start pending MS + while len(self._started) < self._cdf.current_scaled_value() and len(self._unstarted) > 0: + ms = self._unstarted.pop(0) + ms.start(loop) + launch_time = time.clock_gettime(time.CLOCK_MONOTONIC) + self._results[ms.name_number()].set_launch_time(launch_time) + self._started.append(ms) + + # Progress and sleep + self._cdf.step_once() + + now_time = time.clock_gettime(time.CLOCK_MONOTONIC) + sleep_time = (current_time + step_size) - now_time + if sleep_time <= 0: + self.log("Starting too slowly. Moving on", + target=(current_time + step_size), now=now_time, sleep=sleep_time) + too_slow += 1 + else: + loop.schedule_timeout(sleep_time) + loop.select() + current_time += step_size + + end_time = time.clock_gettime(time.CLOCK_MONOTONIC) + self.log("All started...", too_slow=too_slow, duration=end_time - self._start_time) + + def stop_all(self): + for launcher in self._started: + launcher.kill() + + def handle_msg(self, _data, time): + import json + data = json.loads(_data.decode()) + + if data['type'] == 'register': + ms = self._results[data['ms']] + ms.set_start_time(time) + launch_delay = ms.start_time() - ms.launch_time() + self.log("MS start registered ", ms=ms, at=time, delay=launch_delay) + elif data['type'] == 'event': + if data['data']['lu_done'] == 1: + ms = self._results[data['ms']] + ms.set_lu_time(time) + self.log("MS performed LU ", ms=ms, at=time, lu_delay=ms.lu_delay()) + else: + print(time, data) + raise Exception("Unknown event type..:" + _data.decode()) + + + def wait_for_result(self, loop): + to_complete_time = self._start_time + self.TEST_TIME.total_seconds() + + while True: + now_time = time.clock_gettime(time.CLOCK_MONOTONIC) + sleep_time = to_complete_time - now_time + if sleep_time < 0: + break + loop.schedule_timeout(sleep_time) + loop.select() + + def print_stats(self): + from functools import reduce + all_completed = reduce(lambda b, ms: b and ms.lu_time() is not None, self._results.values(), True) + min_value = min(self._results.values(), key=lambda x: x.lu_delay()) + max_value = max(self._results.values(), key=lambda x: x.lu_delay()) + + self.log("Tests done", all_completed=all_completed, + min=min_value.lu_delay(), max=max_value.lu_delay()) -- To view, visit https://gerrit.osmocom.org/6918 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: merged Gerrit-Change-Id: Id3277ed0f0f9ee734569bedd4752564eb68c9cfd Gerrit-PatchSet: 11 Gerrit-Project: osmo-gsm-tester Gerrit-Branch: master Gerrit-Owner: Holger Freyther <holger at freyther.de> Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Holger Freyther <holger at freyther.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: Pau Espin Pedrol <pespin at sysmocom.de> Gerrit-Reviewer: neels <nhofmeyr at sysmocom.de>