This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Neels Hofmeyr gerrit-no-reply at lists.osmocom.orgHello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/3832 to look at the new patch set (#2). doc/examples: tweak osmo-bsc.cfg, add osmo-bsc_custom-sccp.cfg Now osmo-bsc.cfg's SCCP addresses work by internal defaults, while osmo-bsc_custom-sccp.cfg shows how to use custom STP IP address and SCCP point codes. Change-Id: Icb41d5adc24b2ee5613be691a201df8f3566e5dd --- M doc/examples/osmo-bsc/osmo-bsc.cfg A doc/examples/osmo-bsc/osmo-bsc_custom-scpp.cfg M osmoappdesc.py 3 files changed, 128 insertions(+), 30 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/32/3832/2 diff --git a/doc/examples/osmo-bsc/osmo-bsc.cfg b/doc/examples/osmo-bsc/osmo-bsc.cfg index 7c10e9d..47123ec 100644 --- a/doc/examples/osmo-bsc/osmo-bsc.cfg +++ b/doc/examples/osmo-bsc/osmo-bsc.cfg @@ -1,11 +1,5 @@ -! -! OsmoBSC (0.9.14+gitr1+3d331c0062bb0c9694dbd4d1eab7adc58138c3ae) configuration saved from vty -!! -password foo -! -! -line vty - no login +! osmo-bsc default configuration +! (assumes STP to run on 127.0.0.1 and uses default point codes) ! e1_input e1_line 0 driver ipa @@ -15,12 +9,14 @@ short name OsmoBSC long name OsmoBSC auth policy closed + authorized-regexp .* location updating reject cause 13 encryption a5 0 - neci 1 + authentication optional + neci 0 paging any use tch 0 rrlp mode none - mm info 1 + mm info 0 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 @@ -28,21 +24,25 @@ handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 + dyn_ts_allow_tch_f 0 + periodic location update 30 bts 0 - type nanobts + type sysmobts band DCS1800 cell_identity 0 location_area_code 1 - training_sequence_code 7 base_station_id_code 63 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 + radio-link-timeout 32 channel allocator ascending rach tx integer 9 rach max transmission 7 - dtx uplink force - dtx downlink + channel-descrption attach 1 + channel-descrption bs-pa-mfrms 5 + channel-descrption bs-ag-blks-res 1 + early-classmark-sending forbidden ip.access unit_id 0 0 oml ip.access stream_id 255 line 0 neighbor-list mode manual-si5 @@ -50,12 +50,14 @@ neighbor-list add arfcn 200 si5 neighbor-list add arfcn 10 si5 neighbor-list add arfcn 20 + codec-support fr gprs mode none + no force-combined-si trx 0 rf_locked 0 arfcn 871 nominal power 23 - max_power_red 20 + max_power_red 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 @@ -81,21 +83,24 @@ timeslot 7 phys_chan_config TCH/F hopping enabled 0 -cs7 instance 1 - point-code 3.0.0 - sccp-address bsc_local - point-code 3.0.0 - sccp-address msc_remote - point-code 1.0.0 -msc - bsc-addr bsc_local - msc-addr msc_remote +msc 0 ip.access rtp-base 4000 timeout-ping 20 timeout-pong 5 - dest 192.168.100.11 6666 0 - access-list-name msc-list - no access-list-name + no timeout-ping advanced + no bsc-welcome-text + no bsc-msc-lost-text + no bsc-grace-text + type normal + allow-emergency allow + amr-config 12_2k forbidden + amr-config 10_2k forbidden + amr-config 7_95k forbidden + amr-config 7_40k forbidden + amr-config 6_70k forbidden + amr-config 5_90k allowed + amr-config 5_15k forbidden + amr-config 4_75k forbidden bsc - no access-list-name - access-list-name bsc-list + mid-call-timeout 0 + no missing-msc-text diff --git a/doc/examples/osmo-bsc/osmo-bsc_custom-scpp.cfg b/doc/examples/osmo-bsc/osmo-bsc_custom-scpp.cfg new file mode 100644 index 0000000..f9c0a3c --- /dev/null +++ b/doc/examples/osmo-bsc/osmo-bsc_custom-scpp.cfg @@ -0,0 +1,92 @@ +! osmo-bsc configuration example for custom SCCP addresses +! +e1_input + e1_line 0 driver ipa +network + network country code 1 + mobile network code 1 + short name OsmoBSC + long name OsmoBSC + auth policy closed + authorized-regexp .* + location updating reject cause 13 + encryption a5 0 + authentication optional + neci 0 + paging any use tch 0 + rrlp mode none + mm info 0 + handover 0 + handover window rxlev averaging 10 + handover window rxqual averaging 1 + handover window rxlev neighbor averaging 10 + handover power budget interval 6 + handover power budget hysteresis 3 + handover maximum distance 9999 + dyn_ts_allow_tch_f 0 + periodic location update 30 + bts 0 + type sysmobts + band DCS1800 + cell_identity 0 + location_area_code 1 + base_station_id_code 63 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + radio-link-timeout 32 + channel allocator ascending + rach tx integer 9 + rach max transmission 7 + channel-descrption attach 1 + channel-descrption bs-pa-mfrms 5 + channel-descrption bs-ag-blks-res 1 + early-classmark-sending forbidden + ip.access unit_id 0 0 + oml ip.access stream_id 255 line 0 + neighbor-list mode manual-si5 + neighbor-list add arfcn 100 + neighbor-list add arfcn 200 + si5 neighbor-list add arfcn 10 + si5 neighbor-list add arfcn 20 + codec-support fr + gprs mode none + no force-combined-si + trx 0 + rf_locked 0 + arfcn 871 + nominal power 23 + max_power_red 0 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 6 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 7 + phys_chan_config TCH/F + hopping enabled 0 +cs7 instance 0 + point-code 0.42.1 + !asp asp-clnt-OsmoBSC 2905 0 m3ua + ! remote-ip 10.23.24.1 ! where to reach the STP + sccp-address msc_remote + point-code 0.23.1 +msc 0 + msc-addr msc_remote diff --git a/osmoappdesc.py b/osmoappdesc.py index 36eb1a7..338239c 100644 --- a/osmoappdesc.py +++ b/osmoappdesc.py @@ -15,7 +15,8 @@ # along with this program. If not, see <http://www.gnu.org/licenses/> app_configs = { - "osmo-bsc": ["doc/examples/osmo-bsc/osmo-bsc.cfg"], + "osmo-bsc": ["doc/examples/osmo-bsc/osmo-bsc.cfg", + "doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg"], "nat": ["doc/examples/osmo-bsc_nat/osmo-bsc_nat.cfg"], } -- To view, visit https://gerrit.osmocom.org/3832 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newpatchset Gerrit-Change-Id: Icb41d5adc24b2ee5613be691a201df8f3566e5dd Gerrit-PatchSet: 2 Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-Owner: Neels Hofmeyr <nhofmeyr at sysmocom.de> Gerrit-Reviewer: Jenkins Builder