This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Vadim Yanitskiy gerrit-no-reply at lists.osmocom.orgReview at https://gerrit.osmocom.org/4373 mobile/vty_interface.c: do not install default commands Since in recent version of libosmocore default commands (such as 'exit' and 'end') are being installed by default, no need to install them twice. This will crash the program. Change-Id: I82c8d04ccc7dc3f19589a79b859a2c993bd1d39c --- M src/host/layer23/src/mobile/vty_interface.c 1 file changed, 0 insertions(+), 50 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmocom-bb refs/changes/73/4373/1 diff --git a/src/host/layer23/src/mobile/vty_interface.c b/src/host/layer23/src/mobile/vty_interface.c index b26d471..9a889e9 100644 --- a/src/host/layer23/src/mobile/vty_interface.c +++ b/src/host/layer23/src/mobile/vty_interface.c @@ -2777,50 +2777,6 @@ return vty->node; } -/* Down vty node level. */ -gDEFUN(ournode_exit, - ournode_exit_cmd, "exit", "Exit current mode and down to previous mode\n") -{ - switch (vty->node) { - case MS_NODE: - vty->node = CONFIG_NODE; - vty->index = NULL; - break; - case TESTSIM_NODE: - case SUPPORT_NODE: - vty->node = MS_NODE; - break; - default: - break; - } - return CMD_SUCCESS; -} - -/* End of configuration. */ -gDEFUN(ournode_end, - ournode_end_cmd, "end", "End current mode and change to enable mode.") -{ - switch (vty->node) { - case VIEW_NODE: - case ENABLE_NODE: - /* Nothing to do. */ - break; - case CONFIG_NODE: - case VTY_NODE: - case MS_NODE: - case TESTSIM_NODE: - case SUPPORT_NODE: - vty_config_unlock(vty); - vty->node = ENABLE_NODE; - vty->index = NULL; - vty->index_sub = NULL; - break; - default: - break; - } - return CMD_SUCCESS; -} - DEFUN(off, off_cmd, "off", "Turn mobiles off (shutdown) and exit") { @@ -2886,8 +2842,6 @@ install_element(CONFIG_NODE, &cfg_no_ms_cmd); install_node(&ms_node, config_write); install_default(MS_NODE); - install_element(MS_NODE, &ournode_exit_cmd); - install_element(MS_NODE, &ournode_end_cmd); install_element(MS_NODE, &cfg_ms_show_this_cmd); install_element(MS_NODE, &cfg_ms_layer2_cmd); install_element(MS_NODE, &cfg_ms_sap_cmd); @@ -2931,8 +2885,6 @@ install_element(MS_NODE, &cfg_ms_support_cmd); install_node(&support_node, config_write_dummy); install_default(SUPPORT_NODE); - install_element(SUPPORT_NODE, &ournode_exit_cmd); - install_element(SUPPORT_NODE, &ournode_end_cmd); install_element(SUPPORT_NODE, &cfg_ms_sup_dtmf_cmd); install_element(SUPPORT_NODE, &cfg_ms_sup_no_dtmf_cmd); install_element(SUPPORT_NODE, &cfg_ms_sup_sms_cmd); @@ -2989,8 +2941,6 @@ install_element(SUPPORT_NODE, &cfg_ms_sup_no_skip_max_per_band_cmd); install_node(&testsim_node, config_write_dummy); install_default(TESTSIM_NODE); - install_element(TESTSIM_NODE, &ournode_exit_cmd); - install_element(TESTSIM_NODE, &ournode_end_cmd); install_element(TESTSIM_NODE, &cfg_test_imsi_cmd); install_element(TESTSIM_NODE, &cfg_test_ki_xor_cmd); install_element(TESTSIM_NODE, &cfg_test_ki_comp128_cmd); -- To view, visit https://gerrit.osmocom.org/4373 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I82c8d04ccc7dc3f19589a79b859a2c993bd1d39c Gerrit-PatchSet: 1 Gerrit-Project: osmocom-bb Gerrit-Branch: master Gerrit-Owner: Vadim Yanitskiy <axilirator at gmail.com>