This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Max gerrit-no-reply at lists.osmocom.orgReview at https://gerrit.osmocom.org/4648 OsmoBSC: update CTRL docs * use proper naming scheme for BTS-specific CTRL commands * add/update oml-* commands Change-Id: I5b2cd940b4d84c140fce871f236aeab091b27360 Related: OS#2486 --- M OsmoBSC/chapters/control.adoc 1 file changed, 14 insertions(+), 13 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-manuals refs/changes/48/4648/1 diff --git a/OsmoBSC/chapters/control.adoc b/OsmoBSC/chapters/control.adoc index a1d6b43..327e5b4 100644 --- a/OsmoBSC/chapters/control.adoc +++ b/OsmoBSC/chapters/control.adoc @@ -4,10 +4,10 @@ The actual protocol is described in <<common-control-if>>, the variables common to all programs using it are described in <<ctrl_common_vars>>. Here we describe variables specific to OsmoBSC. The commands starting with prefix -"net.btsN." are specific to a certain BTS so N have to be replaced with BTS -number when issuing command e. g. "net.bts1.channel-load". Similarly the +"bts.N." are specific to a certain BTS so N have to be replaced with BTS +number when issuing command e. g. "bts.1.channel-load". Similarly the TRX-specific commands are additionally prefixed with TRX number e. g. -"net.bts1.trx2.arfcn". +"bts.1.trx.2.arfcn". .Variables available over control interface [options="header",width="100%",cols="20%,5%,5%,50%,20%"] @@ -28,16 +28,17 @@ |ussd-notify-v1|WO|No|"<cic>,<alert>,<text>"| See <<ussdnot>> for details. |rf_locked|RW|No|"0","1"|See <<rfl>> for details. |number-of-bts|RO|No|"<num>"|Get number of configured BTS. -|net.btsN.location-area-code|RW|No|"<lac>"|Set/Get LAC (value between (0, 65535)). -|net.btsN.cell-identity|RW|No|"<id>"|Set/Get Cell Identity (value between (0, 65535)). -|net.btsN.apply-configuration|WO|No|Ignored|Restart BTS via OML. -|net.btsN.send-new-system-informations|WO|No|Ignored|Regenerate System Information messages for given BTS. -|net.btsN.channel-load|RO|No|"<name>,<used>,<total>"|See <<chanlo>> for details. -|net.btsN.oml-connection-state|RO|No|"connected", "disconnected"|Indicate the status of OML connection of BTS. -|net.btsN.gprs-mode|RW|No|"<mode>"|See <<gprsm>> for details. -|net.btsN.rf_state|RO|No|"<oper>,<admin>,<pol>"|See <<rfs>> for details. -|net.btsN.trxM.arfcn|RW|No|"<arfcn>"|Set/Get ARFCN (value between (0, 1023)). -|net.btsN.trxM.max-power-reduction|RW|No|"<mpr>"|See <<mpr>> for details. +|bts.N.location-area-code|RW|No|"<lac>"|Set/Get LAC (value between (0, 65535)). +|bts.N.cell-identity|RW|No|"<id>"|Set/Get Cell Identity (value between (0, 65535)). +|bts.N.apply-configuration|WO|No|Ignored|Restart BTS via OML. +|bts.N.send-new-system-informations|WO|No|Ignored|Regenerate System Information messages for given BTS. +|bts.N.channel-load|RO|No|"<name>,<used>,<total>"|See <<chanlo>> for details. +|bts.N.oml-connection-state|RO|No|"connected", "disconnected", "degraded"|Indicate the status of OML connection of BTS. +|bts.N.oml-uptime|RO|No|<uptime>|Return OML link uptime in seconds. +|bts.N.gprs-mode|RW|No|"<mode>"|See <<gprsm>> for details. +|bts.N.rf_state|RO|No|"<oper>,<admin>,<pol>"|See <<rfs>> for details. +|bts.N.trx.M.arfcn|RW|No|"<arfcn>"|Set/Get ARFCN (value between (0, 1023)). +|bts.N.trx.M.max-power-reduction|RW|No|"<mpr>"|See <<mpr>> for details. |=== [[notif]] -- To view, visit https://gerrit.osmocom.org/4648 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I5b2cd940b4d84c140fce871f236aeab091b27360 Gerrit-PatchSet: 1 Gerrit-Project: osmo-gsm-manuals Gerrit-Branch: master Gerrit-Owner: Max <msuraev at sysmocom.de>